I'm not able to pair my iPad with my Logitech mini-Boombox. I was able to do this on my original iPad. I was having a problem on an unrelated matter, and the Apple store replaced it with a new device. Previously, all Bluetooth devices worked fine;

I'm not able to pair my iPad via Bluetooth with my Logitech mini-Boombox. I recently brought my iPad to the Apple Store for an unrelated problem, and they replaced it with a new device. The old device had no problem pairing with any of my Bluetooth devices. I'm only haveing the problem with my new device. I was able to pair it with my Apple wireless keyboard, but not the mini-Boombox. I think I've done everything that I've read in other forum posts: I've toggled the Bluetooth setting on and off; I've reset the iPad a couple times; I've turned off and on the mini-Boombox; I've recharged the mini-Boombox. What am I missing here, and how can I fix this?

Hi ecb1999,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Cheers,
- Judy

Similar Messages

My CDMA Straight Talk iPhone 5 was defective and the Apple Store replaced it. But now I can't activate the new iPhone!

I have been to the Apple Store twice now, and my original iPhone has been replaced three times since Tuesday. Straight Talk says they are getting an error on their end when trying to activate and add the phone to my existing account. They are insistent that the phone I have is not a CDMA iPhone and that I need to go back to the Apple Store again to get another phone. My iPhone said that it is activated on CDMA US network, and shows bars and the 3G symbol; and yet my carrier doesn't show up on the top bar where it should be. The iPhone I have now is in fact CDMA with the part number A1429. Has anyone experienced a similar issue when they had their Straight Talk iPhone replaced?

My friend threw a Straight Talk SIM card in so now it is working on the GSM network. The service isn't as good but at least my phone works again.

My original iPhones screen had problems, and the apple store replaced the phone for me. However this new phone doesn't connect really at all to the 3G network. My phone automatically goes to GPRS. Is it a defective iPhone?

What do you think?

My friend threw a Straight Talk SIM card in so now it is working on the GSM network. The service isn't as good but at least my phone works again.

Vendors, I noticed the price of the IPAD 2 was identical at Walmart,Best Buy, Frys, and the Apple store the sales person at The Apple Store told me the main benefit to buying the IPAD 2 from the Apple Store is that they do all the initial set up is this t

Vendors, I noticed the price of the IPAD 2 was identical at Walmart,Best Buy, Frys, and the Apple store the sales person at The Apple Store told me the main benefit to buying the IPAD 2 from the Apple Store is that they do all the initial set up of the device is this not the case for all the vendors of the IPAD2? Also as I was inside the local Apple Store they were conducting some sort of tutorial on the use of the IPAD 2( at least 40 persons in attendance) is this free?

There are no vendors on this site - just other users helping each other solve issues ..... but to answer your questions.....
Those instructional workshops are free to attend. This is copied from the information website at one of the Apple Stores in Pittsburgh, PA
Take a workshop. On the house.
Learn something new by taking a free workshop at an Apple Retail Store. Our workshops are taught by people passionate and knowledgeable about Apple products and eager to share their knowledge with you. Sign up in advance or drop in. You’ll have a great time, learn new skills, and pick up loads of tips.
If the price is the same everywhere that you have looked - I would suggest purchasing wherever you feel most comfortable. I think you might be answering your own question though when you ask if the workshops are free. You are not going to get the type of instruction - if you get any at all - from a reseller like you will get at an Apple Store. The Apple Store will set the device up for you if you want them to do so.

I occasionally have issues waking my macbook pro up from sleep mode and have to restart the computer. The apple store replaced the sleep part but the problem is still there

I occasionally have issues waking my macbook pro up from sleep mode resulting in my need to restart the computer. I dislike all of my programs opening at once when I do get the computer started becasue it slows the cpu down. The apple store replaced the sleep part but the problem is still there. Note: i never had this problem with snow leopard

I'm not certain but my new MBA 13...when in sleep mode comes back on from a black screen when I simply click on the left mouse button. Also, one time I did a SECURE EMPTY TRASH on files that totalled more than 1GB and it took so long that the fan kept increasing in speed so I pressed on the POWER button and the MBA shut...I was able to boot up with no problem. As a rule, I now only do secured erases for trash bin data totalling 500mb or less...anything above that gets a regular erase (dump).

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

For each mail account, along with designating a primary SMTP server, you should be able to just turn off any and all other SMTP servers you have listed. In that case, if there is a problem with comcast, the message send should just fail.
Also make sure your comcast smtp settings are correct (port, likely 587 but might be something else for comcast, whether you should be suing SSL or not, do you need authentication or not).
You might find the comcast forums useful for getting the settings right - I found this:
http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/iphone-email/m-p/66 1151?view=by_date_ascending#M131151
The second poster notes, SSL should be on, authentication should be "password" and you should be using port 995

I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. The recycled the drive i

I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. They recycled the drive immediately (like a fool I didn't ask for it back to get the data off it.) But luckily I have all my data on CrashPlan. I downloaded it and it worked great except I downloaded it to the desktop and not the original location so it got squirrely. I also have an external 1.5Tb drive that I wanted to make bootable so I installed Mavericks 10.9.3 . I then went ahead and installed it on the newly installed drive too.
I think that because I have a new drive Adobe thinks I have a news computer. I bought the 27" Mac brand new from Ebay and it came loaded with software, including CS6. I have a serial number for CS6 but Adobe said it wasn't valid. (I have owned CS2, CS4 and now CS6 which came preloaded onto the Mac by the seller who told me that the software was registered to the Mac???
I am going to re-download the backup but this time to the original location (I still don't think it will work with Adobe. What can I do about this?
iMac 27-inch, Late 2012
Processor 3.2 GHz Intel Core i5
Memory 32 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 675MX 1024 MB
Software OS X 10.9.3 (13D65)@

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

HT1311 trying to update apps in the app store. My old apple id comes up. I've already signed in and out off itunes and the app store several times with the current id. still everytime i try to update the apps the old id comes up

trying to update apps in the app store. My old apple id comes up. I've already signed in and out off itunes and the app store several times with the current id. still everytime i try to update the apps the old id comes up

Apps and their updates are permanently tied to the ID used to purchase them originally. It will always ask you for your old ID if they were purchased using that ID. The only way to stop this would be to delete them from your phone and your iTunes library, then repurchase them using your current ID.

The apple store replaced my phone due to it being defective. I had purchased some applications on the old phone how do I reinstall them on the new phone?

The Apple Store replaced my defective iPhone today. I would like to get the applcations reinstall on the new phone. How can I get this done?

Click on the iTunes App. Select "Purchased" and you will find them with a cloud symbol next to them. Re-download...
Sly

The hard drive on my MacBookPro crashed. The Apple store replaced it. Since then I can't open iphoto. It asks to rebuild library; when I click yes, I get: "Aperture cannot access this library; reset permissions." I don't own Aperture!

The hard drive on my MacBookPro recently crashed. The Apple store replaced it. Since then I can't open iphoto. It asks to rebuild library; when I click yes, I get: "Aperture cannot access this library; reset permissions." I don't own Aperture! Any thoughts on how I can rebuild the iphoto library? Currently I can't even get into it.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Why the apple store billed me with the purchase that didn't go throug because there is a problem with the server

Why the Apple Store billed me with the purchase from City Ville that didn't go through because they have problem with the server,

This is happening to me too. I'm looking for anyway to fix this its getting very annoying not being able to update apps.

TS2446 Trying to buy pages and numbers on my new macbook pro, and the apple store is asking me security questions of which I've never answered. It's indicating that my answers are wrong. Any help would me great!

Trying to buy pages and numbers on my new macbook pro, and the apple store is asking me security questions of which I've never answered. It's indicating that my answers are wrong. Any help would me great!

Welcome to the Apple Community.
Contact Apple through iTunes Store Support

Hi, my iPhone 3GS wall charger stoped working, and I went to Orange shop with my warranty and L.I.G. insurance.They said I should also give them the phone for almost 10 days, isn't there a faster way, is it possible the Apple Store replaces my wall charge

My 5YO daughter owns her very own IPhone 3GS, she got it for her 5YO birthday on the 24th of june. its allready upgraded to iOS5, and works like a charm.
Last evening, while it was charging, a flame appeared and the charger stopped working.The USB still works.
It was plugged in a Belkin 3700 joule along with my 47 Inch Full HD TV .
No storm or something like that, and there was nothing wrong with my TV, as in was still running.
Problem.
I went today to an Orange store here in Romania, with the charger, invoice,warranty, and L.I.G. (London Insurrace Group ((I think))) insurrance, and they said I MUST also bring the iPhone, and thet it will take just about 10 working days for them to give me back the Iphone, and a new charger.
Is there a faster way I can get the wall charger replaced?
Should I try going to the Apple Store with the warranty from Orange.
Thank you for your answers.
Please excuse my English.
CONDOLENCES APPLE. for your painfull loss.

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

I'm not able to pair my iPad with my Logitech mini-Boombox. I was able to do this on my original iPad. I was having a problem on an unrelated matter, and the Apple store replaced it with a new device. Previously, all Bluetooth devices worked fine;

Similar Messages

Maybe you are looking for