Database resource with multiple rows for a same user

Hi all,
I have a database table I'd like to manage in IDM but this table has more than one row per user (the number of rows being variable (from 1 to n, n being able to change every minute).
Thanks for your advice,
Ben

I think you need to explore the Scripted JDBC resource.
This will allow you to write beanshell scripts to do the needful on the table row (or rows) relating to a single IDM user. Check out the examples.
GF

Similar Messages

Multiple sessions for the same user

Hi,
The scenario is like this. The user is logged into the system using JAAS and
has a session object created. I want to create a new session for the same user
with the already available credentials. This is to provide the same user the access
to the application in another window with different session object. How can do
that in Weblogic 8.1 server ?
thanks in advance,
Krishna.

Hi
I think it would be easier to enable session time out settings using GPO considering you work in a domain environment..
Having session timeouts settings you could say... hey after 15 min of inactivity disconnect the user and then after 15 min of disconnected session log him off
Take a look at this URL: http://technet.microsoft.com/en-us/library/cc754272.aspx
Hope this helps
Best regards
Joaquin Camarero Muñoz

How can I create a hashmap() with multiple values for the same key?

I am trying to write an application that will us something like a Map() with multiple values but some have the same key. Is this possible?

i had the same question. just create a List, add all the values u want to it, and then put the List into the map like u would a normal single value. e.g.
List list = new ArrayList();
list.add(value1);
list.add(value2);
map.put(key, list);
i bet u r doing the same course as i am =)

Report Template Help - Vertical report with multiple rows on the same line.

I am tearing my hair out trying to figure a way to do this. I want a vertical report, but with the rows across the page rather than down it.
e.g.
ROW1    ROW2    ROW3    ROW4   ROW5
ROW1    ROW2    ROW3    ROW4   ROW5
ROW1    ROW2    ROW3    ROW4   ROW5
ROW1    ROW2    ROW3    ROW4   ROW5
ROW1    ROW2    ROW3    ROW4   ROW5
ROW1    ROW2    ROW3    ROW4   ROW5
ROW1    ROW2    ROW3    ROW4   ROW5
ROW1    ROW2    ROW3    ROW4   ROW5Has anyone managed to do this?

Use a custom named column report template. The template could generate either:
<li> a table with one physical <tt>tr</tt> row, with your "columns" being the logical "rows" of the report rendered as the <tt>td</tt>s within the row
<li> a list of lists using CSS to render them side-by-side via <tt>float</tt> or <tt>inline-block</tt> (Some examples of similar techniques)

Multiple layouts for the same user in the same portal

Hello.
I have a challenge.
Currently there is a portal (6.40) running as a frontend for an application. So the portal is used for only this purpose. The content is a changed masthead and a number of WebDynpros and UWL's all accessing the same backend.
Now there is a wish to use the same portal to execute a transaction iView for the same backend. Simple. BUT when a user uses the portal for the product he/she shall not see the transaction iView and also when the user sees the transaction iView, the WDs and UWL's should not be shown in the navigation. And also the masthead should be different on the two views.
Putting in another portal is not anoption, this should be done on the same portal. The way I expect it to work is by accessing the same portal og two different URL's.
Companies cannot be used since some of the users should be able to access poth views.
I know that in a prefect world it would simply be a matter of creating two different roles and assign them as needed and if the user has both roles hen they would both be available in the navigation. But to the user the portal should look like different portals.
Any suggestions on how to achieve this functionality?
Br,
Thomas Mouritsen

Hi Thomas,
you have several options with the portal standard:
1.) If the user only has one role assigned at a time you can attach the portal layout to the roles. So depending on the role the user has he sees the respective layout - BUT: how to asign the two roles to the user!? This can only be done by admins and I assume that it is no intended to call the admins every time the user needs the other role?
2.) The entry to the portal is realized with different urls like http://yourportal.com/VIEW1 and http://yourportal.com/VIEW2.
VIEW1 and VIEW2 are so called portal aliases and you can attach the different layouts to those aliases.
BUT: the two roles have nothing to do with the aliases so you still have the problem of role assignment.
3.) Each person gets two users with each user assigned to one role and one layout assigned to the user or group or role...
Anyhow: I would ask the people who brought up the idea of two different layouts - WHY?? A portal is ONE single point of entry for EVERY application and information a user needs. So why two different layouts? And what, if five others are coming each bringing their own layouts, too?
4.) If you really want to have different layouts each time a different top-level navigation point is active you have to program your own portal component. That would fit your needs but is besides standard.
Hth,
Michael

Multiple connections for the same user.

I have EJB A and EJB B. A and B use a JCA connector that
I have written. I have matchManagedConnections set so that if user U has not used EJB A or EJB B, then a new ManagedConnection is created. If user U has used A or B then that user is given a new virtual connection created from an existing ManagedConnection. Now the problem is that if user U access' A for the first time and then access' B BEFORE A has closed the connection, then a new ManagedConnection is created for user U. Therefore in this case user U gets 2 ManagedConnections to the EIS that we are using. Eventually one of the ManagedConnections is distroyed but I would like to eliminate this in the first place. How do a get Weblogic to see that a user has a ManagedConnection before that user is done with the connection.

You can't have multiple roles on multiple connection, as you are connecting to the same website (different sub directories) ultimately.
Here is the workaround:-
You can create a new user account on your machine and can manage different roles.
Hope it helps.

Multiple mailboxes for the same user

I have configured mail to work with virtual domains so I can create a different mailbox for each email address but how do only allow the mail to that specific address to come through. As I don't want the local and virtual in the same mailbox.

User A can have one mailbox associated with his ID. You can create other "User A" mailboxes with different names and e-mail addresses as shared mailboxes and grant User A full mailbox rights and send as right. User A can
then connect to each one of them separately.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Logoff remote sessions to multiple servers for the same user

Hi,
I'm after some advice, I have a junior DBA working with me who has a tendancy to leave remote connections on various production servers, we have a large estate about 300 servers and trying to identify the servers is a difficult task.
I was hoping to use SQL Server Management Studio / Registered servers and issue one simple command against all servers to logoff the account which has been left connected. I normally log into each server start Task Manager/Users and log off the account,
this then stops the account locking but only when I have identified all servers he is still connected to. I have tried the comand prompt Logoff and session ID, this works great but the session ID on each server can be different.
Any help or advice would be great! Thanks in advance.

Hi
I think it would be easier to enable session time out settings using GPO considering you work in a domain environment..
Having session timeouts settings you could say... hey after 15 min of inactivity disconnect the user and then after 15 min of disconnected session log him off
Take a look at this URL: http://technet.microsoft.com/en-us/library/cc754272.aspx
Hope this helps
Best regards
Joaquin Camarero Muñoz

I want to create a mail merge for address labels into a table, but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address.

...but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address. Please help.
Thanks!

That is a quirk of Pagesthat it applies only one record per page.
There is a way around this:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
Peter

Import xml data in Access when multiple rows use the same fieldname

HI.
First of all sorry for my english :-) I have a LiveCycle Designer ES form with multiple rows that I send via e-mail as XML data.
example:
Row 1
Firstname: John Lastname: Dow
Row 2
Firstname: Steve Lastname: Austin
The exported XML is OK but when I want to import it into my Access database, only one row is imported. I pretty sure that the problem comes from the fact that may exported XML use the same fieldname (what is important if I want to import data in the correct Access field) but I don't know what to do to be able to import all the rows of the same Form.
Any idea?
Thanks a lot
Frederic

Hi Viktor,
In case of order recognition rules you should increase the relevancy in the newer version of the cartridge so appropriate ORR will be triggered. In other xqueries, you can try using new namespace as a model variable for each and every version of the cartridge
Regards,
JP

Input enabled table with multiple rows

Hi All,
I have a scenario to create a table in webdynpro for abap. This is a user interface. Here user will be providing value for tabe in multiple rows. And once user will press the Save button then all the rows of table will be read and will be saved in database.
My problem is the table is displaying only one row as input enabled not all the rows. Can anyone please help on this? Points will be assured.
If I am providing rowCount = 2. Or more than 2 then it is creating short dump.
Thanks & Regards,
Ashvender

Hi Ashvender
In init method of your view :
Read the context node with which u have binded the table control fields.
Create a internal table same as structure of your context node
append blank records for as many editable rows u wanted
Bind the internal table.
Ex:
node_table TYPE REF TO if_wd_context_node,
elem_table TYPE REF TO if_wd_context_element,
stru_table TYPE if_v_table=>element_flight ,
lt_stru_table TYPE if_v_table=>elements_flight .
node_table = wd_context->get_child_node( 'TABLE' ).
clear: stru_table.
do 5 times.
append stru_table to it_table.
enddo.
node_table->bind_table( it_table).
Regards
Vishal Kapoor

Drill Down between 2 stacked column chart with multiple rows.

Hi,
Can anyone please help me.
1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
to achieve this,
i'm using 2 stacked column charts and 1 lebel baseb menu.
from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
Becoz my data is multiple row for each quarter.
please suggest me to achieve the drill down between 2 stacked column charts.
assume that my data like below.:
coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
Region                Q2                Q3               Q4
Other              3658              3497               497
NA - North
America                3               3               1101
APJK     1     4     597
UK               324
EMEA North     1     1     288
CORPORATE     1     5     215
LA -
Latin America1     2     208
EMEA     1          199
EMEA South     1     1     169
Coulmns for 2nd coumn chart: Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
Region     Priority     Q2     Q3     Q4
Other     D: End of Next Day     1568     1613     239
Other     C: End of Day     983     893     119
Other     A: 2 Hour     631     610     70
Other     B: 4 Hour     396     318     56
NA -
North AmericaD: End of Next Day     2     2     514
APJK     D: End of Next Day          3     297
NA -
North AmericaC: End of Day               284
NA -
North AmericaA: 2 Hour     1          170
UK     D: End of Next Day               157
APJK     C: End of Day     1     1     152
Other     E: 3 - 5 Business Days     68     58     13
EMEA North     D: End of Next Day          1     136
CORPORATE     D: End of Next Day          4     107
NA - North America     B: 4 Hour          1     104
LA - Latin America     D: End of Next Day     1     1     86
EMEA     D: End of Next Day               86
UK     C: End of Day               85
APJK     A: 2 Hour               79
EMEA South     D: End of Next Day               72
EMEA North     A: 2 Hour               69
EMEA North     C: End of Day               56
APJK     B: 4 Hour               55
EMEA     C: End of Day     1          53
LA - Latin America     C: End of Day               54
UK     A: 2 Hour               49
EMEA South     C: End of Day     1          44
CORPORATE     A: 2 Hour          1     43
CORPORATE     C: End of Day               44
LA - Latin America     A: 2 Hour          1     42
EMEA South     A: 2 Hour          1     32
EMEA     B: 4 Hour               30
UK     B: 4 Hour               30
EMEA     A: 2 Hour               27
EMEA North     B: 4 Hour     1          26
NA -
North AmericaE: 3 - 5 Business Days               25
LA - Latin America     B: 4 Hour               23
EMEA South     B: 4 Hour               20
CORPORATE     B: 4 Hour               17
APJK     E: 3 - 5 Business Days               13
Other     F: 6 - 10 Business Days     6     4
Other     G: 11 - 20 Business Days     6     1

Hi Srinivas,
I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
for mor details:
1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept.

Timesten replication with multiple interfaces sharing the same hostname

Hi,
we have in our environment two Sun T2000 nodes, running SunOS 5.10 and hosting a TT server currently in Release 7.0.5.9.0, replicated between each other.
I would like to have some more information on the behavior of the replication w.r.t. network reliability when using two interfaces associated to the same hostname, the one used to define the replication element.
To make an example we have our nodes sharing this common /etc/hosts elements:
151.98.227.5 TBMAS10df2 TBMAS10df2-10 TBMAS10df2-ttrep
151.98.226.5 TBMAS10df2 TBMAS10df2-01 TBMAS10df2-ttrep
151.98.227.4 TBMAS9df1 TBMAS9df1-10 TBMAS9df1-ttrep
151.98.226.4 TBMAS9df1 TBMAS9df1-01 TBMAS9df1-ttrep
with the following element defined for replication:
ALTER REPLICATION REPLSCHEME
ADD ELEMENT HDF_GNP_CDPN_1 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS9df1-ttrep"
SUBSCRIBER tt41data ON "TBMAS10df2-ttrep"
RETURN RECEIPT BY REQUEST
ADD ELEMENT HDF_GNP_CDPN_2 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS10df2-ttrep"
SUBSCRIBER tt41data ON "TBMAS9df1-ttrep"
RETURN RECEIPT BY REQUEST;
On this subject moving from 6.0.x to 7.0.x there has been some changes I would like to better understand.
6.0.x reported in the documentation for Unix systems:
If a host contains multiple network interfaces (with different IP addresses),
TimesTen replication tries to connect to the IP addresses in the same order as
returned by the gethostbyname call. It will try to connect using the first address;
if a connection cannot be established, it tries the remaining addresses in order
until a connection is established.
Now On Solaris I don't know how to let gethostbyname return more than one interface (the documention notes at this point:
If you have multiple network interface cards (NICs), be sure that “multi
on” is specified in the /etc/host.conf file. Otherwise, gethostbyname will not
return multiple addresses).
But I understand this could be valid for Linux based systems not for Solaris.
Now if I properly understand the above, how was the 6.0.x able to realize the first interface in the list (using the same -ttrep hostname) was down and use the other, if gethostbyname was reporting only a single entry ?
Once upgraded to 7.0.x we realized the ADD ROUTE option was added to teach TT how to use different interfaces associated to the same hostname. In our environment we did not include this clause, but still the replication was working fine regardless of which interface we were bringing down.
My both questions in the end lead to the same doubt on which is the algorithm used by TT to reach the replicated node w.r.t. entries in the /etc/hosts.
Looking at the nodes I can see that by default both routes are being used:
TBMAS10df2:/-# netstat -an|grep "151.98.227."
151.98.225.104.45312 151.98.227.4.14000 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.47307 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.48230 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.46050 151.98.227.4.14005 1049792 0 1049800 0 ESTABLISHED
TBMAS10df2:/-# netstat -an|grep "151.98.226."
151.98.226.5.14000 151.98.226.4.47699 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.14005 151.98.226.4.47308 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.44949 151.98.226.4.14005 1049792 0 1049800 0 ESTABLISHED
Tried to trace with ttTraceMon but once I brought down one of the interfaces did not see any reaction on either node, if you have some info it would be really appreciated !
Cheers,
Mike

Hi Chris,
Thanks for the reply, I have few more queries on this.
1.Using the ROUTE CLAUSE we can use multiple IPs using priority level set, so that if highest priority level set in thr ROUTE clause for the IP is not active it will fall back to the next level priority 2 set IP. But cant we use ROUTE clause to use the multiple route IPs for replication simultaneously?
2. can we execute multiple schema for the same DSN and replication scheme but with different replication route IPs?
for example:
At present on my system, I have a replication scheme running for a specific DSN with stand alone Master-Subscriber mechanism, with a specific route IP through VLAN-xxx for replication.
Now I want to create and start another replication scheme for the same DSN and replication mechanism with a different VLAN-yyy route IP to be used for replication in parallel to the existing replication scheme. without making any changes to the pre-existing replication scheme.
for the above scenarios, will there be any specific changes respective to the different replication schema mechanism ie., Active Standby and Standalone Master Subscriber mechanism etc.,
If so what are the steps. like how we need to change the existing schema?
Thanks In advance.
Naveen

Multiple Faces for the same person

I found this unanswered archived post, which is expressing exactly the same problem I'm having...
http://discussions.apple.com/thread.jspa?threadID=2099862
When tagging photos there are multiple entries for the same person listed. In particular for three people (my kids) who have a lot of photos for each person. On the Cork board there is only one entry per person, so this is not a multiple face entry there.
I was living with this for a while, but now I have my iPhone and can sync faces photos with it, I can see again there are multiple entries listed for these three people, yet there's nothing I can do in iPhoto to consolidate them.
Has anyone else come across this (like the person in the above thread - which didn't get answered) and found a solution to fix up iPhoto? Clearly it's something odd going on in the Faces database thinking there are different entries tagged, but is still showing them together in the Cork Board.

I would like to know how you got the multiple entries to appear. I'm having the same problem with my daughter. The only issue is, she is two and does not have any address book entries. I think I may have typed her name out several times when adding her name to a face instead of associating the photo with the existing entry. iPhoto recognizes they are the same places in some places, but not in others. I started a new post...
http://discussions.apple.com/thread.jspa?threadID=2319735&tstart=0

Events cannot have multiple exceptions for the same date

I just starting getting this message and could not sync to one of my Google calendars. I'm posting this for others who might get the same problem.
I didn't find the answer on these forums but did find it on this thread on Google:
http://www.google.com/support/forum/p/Calendar/thread?tid=241155f758d9e2a4&hl=en
Here's the important excerpt:
"I had a client, who just had this same issue, nothing to do with Google cals.
It was apparently, in my best guess, a corruption of the subscribed cal.
*I did a get info on the cal, copied the URL, deleted the cal, then re-subscribed to it by pasting in the URL, and now it's working fine*."

I've been having the same problem with my iCal calendars and the "Events cannot have multiple exceptions for the same date" error. Once it gets going, it uses up a lot of the CPU and resources. After reinstalling iCal, all my calendars were missing and I could not even resubscribe to them.
I took my MacBook Pro to the Apple Store, and they were able to solve the problem by moving some of the iCal files from their existing folders out to the desktop, and reopening the program. That got it working, however, now I'm having the same problem again. So back to square one. Anyone else having this issue and know the cause?
My setup is my MacBook Pro uses Entourage, use that calendar in my iCal. And I subscribe to two calendars my wife publishes on her Macbook. We're both using Snow Leopard.

Database resource with multiple rows for a same user

Similar Messages

Maybe you are looking for