DataMover,Application Designer Signon error

I am using db2 9.7,Peopletools 8.53 in windows server 2008
while logging in app designer or datamover(boot strap or Normal) i got the error as invalid password.
in trace file it show's as
PeopleTools 8.53 Client Trace - 2013-03-02
PID-Line Time Elapsed Trace Data...
-------- -------- ---------- -------------------->
1-1 19.22.44 Tuxedo session opened {oprid='db2admin', appname='TwoTier', addr='//TwoTier:7000', open at 0311A390, pid=3336}
1-2 19.22.44 0.181000 Database Options: override_connection_reset: 0
even configured odbc connection it's showing connection success....

It's been a long time since I used DB2 with PeopleSoft, but you used to have to setup the connection with the DB2 client software as well as the odbc connection if I'm not mistaken. A quick check of the documentation describes this in the install doc in Appendix B-5 (for tools 8.52) You need to install the DB2 Connect client, catalog the database, and then register the ODBC with the DB2 client. Did you do the ODBC datasouce with the DB2 client or Windows only?
If that's not what you missed I'd look at the following. Can you connect to the database with a separate SQL tool (rules out network issues)? Did you set the connect id and password in Configuration Manager? Do you have an app server setup that connects to this database if so, can you connect with datamover from there (don't forget connect id in pscfg)?

Similar Messages

BEx Web Application Designer Execution Errors

Hi there,
When I execute report via BEx Web Application Designer, the error message is shown as
The metadata of "ITE" "CHART_ITEM" are incorrect for parameter "LEGEND_POSITION"
The metadata of "ITE" "CHART_ITEM" are incorrect for parameter "LEGEND_POSITION"
I can not get the review form.
Did anyone meet this problem? How to resolve it?
Thanks in advance
Edited by: Jonas Sun on Oct 2, 2008 12:40 PM
Edited by: Jonas Sun on Oct 2, 2008 12:41 PM

Hi
In the XHTML code for the web template check the value being assigned to LEGEND_POSITION . If its some worng value assigned then please chnage it and execute the web template.

Web Application Designer -Unknown Error Occured during Portal Communication

we are getting the below error while using the Web Application Designer .
"Unknown Error Occured during Portal Communication"
Vesrion
SAPBW 700 SP14 on ABAP & SP12 on JAVA.
Found the below error in the default trace
Error 1
Exception thrown Fri Aug 15 11:29:15,070:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXYnot found on host smy14sap99, ProgId =SMY14SAP99_PORTAL_BD1: Object not found in lookup of RSWR_PREEXECUTION_PROXY.
Error 2
Error> occured >Fri Aug 15 11:29:12,413<
RfcException:
message: 'ashost' is missing
Return code: RFC_INVALID_PARAMETER(19)
error group: 101
key: RFC_ERROR_PROGRAM

Hello,
Have a look at these Notes
SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
SAP Note 916090 RFC-error messages in Web Application Designer 2004s
Thanks
Chandran

BEx Web Application Designer Runtime Error 398

Whenever I close a Template Window the runtime error "398: Application-defined or object-defined error" occurs.
This error happens since about 1 week - before there weren't any problems. The error occurs for each template that is closed.

Hi all,
if you would search in OSS or in the forum you would find note 819131
or topic
WAD run-time error message
Kind regards
Heike

Web Application Designer Opening Error

Hello Experts,
I can open the WAD. After that if I try to open any of the web reports I get this error.
'Internal Error: No template property standard item'
Any suggestions appreciated.
Thanks,
BWer

Hi BWer,
You can try the following.
in the Temp folder (%temp%) is folder bw. rename or delete this folder. in the %temp% folder are also files which begin with SAPBWWebApplicationDesigner. delete these files too.
then restart the WAD. Then it should normally.
if not you can press the new button in the toolbar, which also forces the WAD to initialize
i hope this helps.
best regards.
kai Wachter

Invalid user Id and password for signon to Application designer!!

Hi There,
I am trying to instal peoplesoft HRMS 9.0 on Vista and Oracle 10g release 2.
- Installed Weblogic server
- Tuxido
- Installed Peopletools 8.49
- Installed HRMS 9.0
- Created initHCDMO and created the database
- ran the scripts under the scripts/nt folder
- logged onto datamover with 'system' as user and 'manager' as password and successfully ran the script
- ran the rel849n.sql script and grants.sql after logging onto sqlplus with 'system' as user and 'manager' as password
- after that when I am trying to login to the application designer in 2 tier mode, with PS as user and PS as password, I am getting the error 'Invalid User ID and password for signon'
Can anybody please help me|?
Thanks,
Partho

Thanks Nicholas,
It solved my problem, and I have moved on with the rest of the steps and I am stuck at starting the Application server. I have ran all the datamover scripts and all other configurations for the database. I can login to the database, with sql plus with SYSADM, SYSADM.
Quick-configure menu -- domain: ps
Features Settings
========== ==========
1) Pub/Sub Servers : No 15) DBNAME :[HCDMO]
2) Quick Server : No 16) DBTYPE :[ORACLE]
3) Query Servers : No 17) UserId :[SYSADM]
4) Jolt : Yes 18) UserPswd :[SYSADM]
5) Jolt Relay : Yes 19) DomainID :[TESTSERV]
6) WSL : Yes 20) AddToPATH :[D:\oracle\product\10.1.0\Db_1\BI
N]
7) PC Debugger : No 21) ConnectID :[people]
8) Event Notification: Yes 22) ConnectPswd:[peop1e]
9) MCF Servers : No 23) ServerName :[]
10) Perf Collator : No 24) WSL Port :[7000]
11) Analytic Servers : Yes 25) JSL Port :[9000]
12) Domains Gateway : No 26) JRAD Port :[9100]
Actions
=========
13) Load config as shown
14) Custom configuration
h) Help for this menu
q) Return to previous menu
=================================
when I boot the domain, I get the following error:
Command to execute (1-10, q) : 1
PeopleSoft Domain Boot Menu
Domain Name: ps
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
psappsrv.cfg has changed archiving old one...
Copying ps\Archive\psappsrv.cfg to ps\Archive\psappsrv_070609_1915_55.cfg
Attempting to boot bulletin board...
tmadmin - Copyright (c) 1996-1999 BEA Systems, Inc.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by BEA Systems, Inc.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
INFO: BEA Tuxedo, Version 9.1, 32-bit, Patch Level (none)
INFO: Serial #: 650522264137-2065448083901, Expiration NONE, Maxusers 1000000
INFO: Licensed to: Oracle-Peoplesoft-ISV
Booting admin processes ...
exec BBL -A :
process id=492 ... Started.
1 process started.
Attempting to boot ...
INFO: BEA Tuxedo, Version 9.1, 32-bit, Patch Level (none)
INFO: Serial #: 650522264137-2065448083901, Expiration NONE, Maxusers 1000000
INFO: Licensed to: Oracle-Peoplesoft-ISV
Booting server processes ...
exec PSWATCHSRV -A -- -ID 52849 -C psappsrv.cfg -D TESTSERV -S PSWATCHSRV :
process id=3120 ... Started.
exec PSAPPSRV -s@..\psappsrv.lst -s@..\psqcksrv.lst -sICQuery -sSqlQuery:SqlRequ
est -- -C psappsrv.cfg -D TESTSERV -S PSAPPSRV :
CMDTUX_CAT:1685: ERROR: Application initialization failure
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha
ndler
tmshutdown -qy
==============ERROR!================
Boot attempt encountered errors!. Check the TUXEDO log for details.
==============ERROR!================
Do you wish to see the error messages in the APPSRV.LOG file? (y/n) [n] :y
PSADMIN.2228 (0) [07/06/09 19:28:42](0) Begin boot attempt on domain ps
PSWATCHSRV.3120 (0) [07/06/09 19:28:50] Checking process status every 120 second
s
PSWATCHSRV.3120 (0) [07/06/09 19:28:50] Server started
PSAPPSRV.2104 (0) [07/06/09 19:28:51](0) PeopleTools Release 8.49 (WinX86) start
ing
PSAPPSRV.2104 (0) [07/06/09 19:28:51](0) Cache Directory being used: D:\PSHOME\a
ppserv\ps\CACHE\PSAPPSRV_2\
PSAPPSRV.2104 (0) [07/06/09 19:28:51](1) GenMessageBox(0, 0, M): Database Signon
: Invalid user ID or password for database signon. (id=SYSADM)
PSAPPSRV.2104 (0) [07/06/09 19:28:51](0) Server failed to start
PSWATCHSRV.3120 (0) [07/06/09 19:28:52] Shutting down
PSADMIN.2228 (0) [07/06/09 19:28:58](0) End boot attempt on domain ps
Do you wish to see the error messages in the TUXLOG.070609 file? (y/n) [n] :y
192842.PSOFTSERVER!PSADMIN.2228: Begin attempt on domain ps
192844.PSOFTSERVER!tmadmin.436.428.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
192846.PSOFTSERVER!tmboot.876.3860.-2: 07-06-2009: Tuxedo Version 9.1, 32-bit
192846.PSOFTSERVER!tmboot.876.3860.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is
set to 60 seconds
192846.PSOFTSERVER!tmboot.876.3860.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAI
L option is selected
192848.PSOFTSERVER!BBL.492.3540.0: 07-06-2009: Tuxedo Version 9.1, 32-bit, Patch
Level (none)
192848.PSOFTSERVER!BBL.492.3540.0: LIBTUX_CAT:262: INFO: Standard main starting
192850.PSOFTSERVER!tmboot.3456.3228.-2: 07-06-2009: Tuxedo Version 9.1, 32-bit
192850.PSOFTSERVER!tmboot.3456.3228.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is
set to 60 seconds
192850.PSOFTSERVER!tmboot.3456.3228.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFA
IL option is selected
192850.PSOFTSERVER!PSWATCHSRV.3120.1072.-2: 07-06-2009: Tuxedo Version 9.1, 32-b
it
192850.PSOFTSERVER!PSWATCHSRV.3120.1072.-2: LIBTUX_CAT:262: INFO: Standard main
starting
192850.PSOFTSERVER!PSAPPSRV.2104.2068.0: 07-06-2009: Tuxedo Version 9.1, 32-bit
192850.PSOFTSERVER!PSAPPSRV.2104.2068.0: LIBTUX_CAT:262: INFO: Standard main sta
rting
192851.PSOFTSERVER!PSAPPSRV.2104.2068.0: LIBTUX_CAT:250: ERROR: tpsvrinit() fail
ed
192851.PSOFTSERVER!tmboot.3456.3228.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal err
or encountered; initiating user error handler
192855.PSOFTSERVER!BBL.492.3540.0: CMDTUX_CAT:26: INFO: The BBL is exiting syste
m
192858.PSOFTSERVER!PSADMIN.2228: End boot attempt on domain ps
==========================**********************===================
I have followed the steps as mentioned in the installation manual.
Please help.
Thanks Partha

Error in Web application designer in BI7.0

Hi,
If we try to create the template and save, it is showing the following error.
JAVA COMMUNICATION ERROR RFC_DESTINATION IS NOT CONFIGURED.
we tried some RFC connections in the backend . It is showing BI metadata for BSM is outdated. I checked the necessary settings according to note :888687.
But we are able to check the RFC connection between ABAP and portal.
But we are getting the same error. While saving the template which created. it showing the error and i am not able to save the template
Please help in this issue..
thanks in advance.
Regards,
Mohankumar.G

I was working on similar issue for 2 days & I am able to overcome the error mention by you related to WAD now I am able to execute the WAD application through portal.
Send me your mail Id I will fwd u the configuration steps
Meanwhile chk Trans: SM59 for RFC connection
IN Visual Admin check the JCo RFC Provider is properly configured with backend username.
Chk all the JCo related to BI are working properly either with SSO or User mapping
Chk in Table RSPOR_T_PORTAL the portal URL is proper or not
(transaction code SM30).
2. Enter RSPOR_T_PORTAL as the table.
3. Choose Maintain.
4. Choose New Entries to create a new entry.
5. Maintain the connected portal:
RFC destination: <RFC_DESTINATION>
System name: <SYSTEMALIAS>
Default: <DEFAULT>
Portal URL prefix: <PORTAL_URL_PREFIX>, for example, http://<portalserver><domain>:<port>
Prefix of RM for BW Metadata: <KM_RM_METADATA_PREFIX>, for example, /bw_metadata
KM service URL: <blank>
Referesh the MetaData Service in BI Web Application Designer under settings try to connect you SAPRFC.ini file set enviroment variables for the same.
Swapnil

WEB APPLICATION DESIGNER - ERROR

Hello
We're getting an error when we try to save an item in BEx Web Application Designer:
RSBOLAP 018 Java system error: An Unknown Error Occured During Portal Communication
RSBOLAP 018 Java system error: Excepction in method processFunction
Has anyone experienced and solved this issue?
Thanks in advance, kind regards!
Jon

Hello,
Have a look at these Notes
SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
SAP Note 916090 RFC-error messages in Web Application Designer 2004s
Thanks
Chandran

Bex Web Application Designer issue: portal communication error

hi experts,
I am working with Bex Web Application Designer in BI7. we are using SP9. When i try to use the Web template its giving below error.
The Requested operation could not be performed due to portal communication error.
its message class is RSBOPLAP and message number is 018 and description is Java System error: An unknown error occured During portal communication.
when i double click the below error details given.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
please give solutions to resolve the issue.
regards
vadlamudi

hi shambhu,
thanks for the reply, yes its related to basis but they are unable to trace it out. is SP9 support Bex Report Designer and Bex WAD??
regards
vadlamudi

RSBOLAP 018 Java system error in BEx Web Application Designer

Hello,
while doing inside BEX Web Application Designer "validation of webtemplate" with
command "validate on server" I get following error message of WAD :
" Message RSBOLAP 018 description : Java system error : an Unknow Error occured during portal communication"
My procedure till now was ( please see results as screenshots in attachment) :
a) ckecking prerequisites for "Java template installer'" --> result "prerequisites.jng"
b) running "Java template installer" -> " result templateInstaller.jpg"
c) running Bex Web Application Designer as mentioned above results in error
message as mentioned above
d) running Diagnostic & Support Desktop Tool --> "result Diagnostic support desktop tool.jpg"
It says that something is wrong with "BI Mastersystem" because of failed connect to
message server.
Please advice me what I should do.
Thanks in advance
Regards,
Oscar

Hello
It is obvious that the connection between the ABAP and the Java is not working.
There should be a JCo RFC from the portal side to the ABAP stack set up and an RFC from the ABAP stack to the portal.
Check the entries of the table RSPOR_T_PORTAL
The RFC specified here should be the one mentioned above (ABAP - Java)
Check the name of the system should be SAP_BW
Is the parameter icm/host_name_full set on the ABAP stack with the domain name ?
Connect to the BI portal:
http://FQDN:5NN00/irj/portal
Navigate to system administration -> system configuration -> system landscape -> expand "portal content" -> systemlandscape -> SAP_BW
Right click on SAP_BW - Open - Object
Here you need to maintain these:
ITS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
ITS Host Name - FQDN_OF_BW_ABAP:port - You can use the value of icm/host_name_full parameter and retrieve port number from Tx SMICM - Services
ITS Path - /sap/bc/gui/sap/its/webgui
ITS Protocol - Select http
Logical System Name - BW ABAP Logical System Name - Tx SCC4 or BD54
Logon Method -SAPLOGONTICKET
Message server - BW ABAP FQDN
SAP Client - BW ABAP Client Number
SAP System ID (SID) - BW ABAP SID
Server Port - 39NN
Web AS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
Web AS Host Name - FQDN_OF_BW_ABAP:port - icm/host_name_full and retrieve port number from Tx SMICM - Services
Web AS Path - /sap/bw/BEx
If everything is set properly then do a test connection.
Good Luck
RB

Error when using Application Designer to logon

Good day experts,
I have just installed PeopleSoft 8.51 on the server, and have just configured the PSADMIN. When I tried to logon using Application Designer in 3-tier mode, I got an error as follows
"An error occurred on the application server within Tuxedo while returning the service GetCertificate. Cancel the current operation and retry. If the problem persists, contact your system administrator"
I have retraced my steps and it was installed as per the installation guide, and I cannot find any cases that address this issue.
Can someone shine some lights on this error?
Thank you very much in advance. Any help is highly appreciated.
Thank you
Mark

I have solved this issue. What's happened was that I was using Oracle Tuxedo 11gR1 which is not supported by PT8.51. Uninstalled 11gR1 and installed 10gR3, and everything is working fine now.

BEX Web application Designer displaying Java Communication Error

Hi,
When we are using the BEX Web application Designer to create new web template, it throws error saying "Java Communication Error: An UnKnown Error Occured During Portal Communication."
====================================================
Diagnosis
An error occurred during communication with the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
====================================================
Kindly help to resolve this issue.
Regards, Krish

Hi,
Please check below document for connection between BI and Portal
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d082fe32-5037-2b10-3288-fd009f695c74
You might be doing something wrong in any of these steps.
Regards,
Kams

Error in Web Application Designer

I hope that somebody can help me, we migrated the system BW of version 3.1 to 3.5, but when trying to enter the Web Application Designer throws the following error:
you are logged on to application server that does not support HTTP
thank's

Hi,
Goto transaction SMICM and see if the ICM is active: Do you see a Red or Green light here? If Red, then use menu Administration > ICM > Restart > Yes
Check the services (Shift+F1) and see if HTTP is active.
Hope this helps...

To use Web Application Designer release 2004s do we need to have portals???

Hi
I would like some clarity regarding whther we need a portal or not.
If you use Web Application Designer (SAP BW 3.x) it works fine, you can create reports and then it shows in SAP Easy Access under favourites. Executes fine, no portal is used.
Now when I want to use the new Web Application Designer I can not execute the reports. Gives me error
"Java communication error: RFC destination NOT_CONFIGURED does not exist", the window it appears in has a text saying it can't conect to the portal. Then notes that I look at regarding this seems that the connection between SAP BW and Portal must be set up.
So can please someone tell me whether you need the portal to use the new Web Application Designer release 2004s
Thanks in advance

YOu neeed BI Java configured
If you do not use any new BEx Web functions, do you have to install the usage types BI Java and EP?
answer -SAP EP 6.0 Portals could be integrated into a federated portal system landscape using URL iViews.
For more insights - FAQ
Pls read carefuly should answer all your current and future questions.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

Unable to open WAD (web application designer) in BW 3.5!

Hi,
when i open WAD through menu path (start->programs
->Business explorer->Web application designer), i am getting the following error!
WADConst
Please log on to a Netweaver BI 7.x system. System J2E does not have the minimum version required 70005.
I just can`t understand from where i got this BI 7.x system, when my system is BW 3.5 (NW04 platform).
can any one expalin me what is this problem? and suggest me to over come this problem?
Thanks,
Ravi

Hi Ravi!
I assume that you installed the SAP GUI 6.40 with BI Addin (which contains the BI Frontend for SAP NetWeaver 2004s BI).
In this case, you have a sub folder underneath "Business Explorer" in your startmenu named "Business Explorer (SAP BW 3.x)".
You have to use this version of the BEx Web Application Designer.
If this is not the case, please create a Support Message with all detailed information (backend and frontend versions).
Thank you,
Tobias

DataMover,Application Designer Signon error

Similar Messages

Maybe you are looking for