Datapoints appearing along the X axis instead of Time

So I currently have a setup with an Agilent O-Scope hooked up to my computer, using an arbitrary Waveform Generator to send the signals. What I am trying to do is get a graph to show the waveforms (4), on my computer. The 4 waveforms show up fine on the OScope screen, but I was wondering how do I switch the actual scale in labview.
Right now, the X axis says "Time," but if I change the number of datapoints to receive, the x scale changes to that number. Is their some way to make Labview receive the information and convert datapoints to time in say microseconds, or do I have to go to Agilent and ask them instead?
Thanks in advance.

You are giving insufficient information. Are you using a chart of a graph?
Charts and graphs assume equal time spacing in x, and the linear relation between the data index and the actual time is configured from the offset and increment setting of the x-axis. For example, if the spacing between adjacent points is 1 microsecond, set the increment (dx) to that value.
If the points are irregularly spaced in x, you need an xy graph instead. See how far you get.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

I have added photos to My Photo Stream on my PC (Windows 7). They appear in the Uploads folder instead. They do not upload to iCloud. Am I doing something wrong?

I have added photos to My Photo Stream on my PC (Windows 7). They appear in the Uploads folder instead. They do not upload to iCloud. Am I doing something wrong?

Unfortunately, photo stream on a PC is iffy at best. Many people have problems getting it to work properly, including myself. A work around would be to use an app like PhotoSync on your PC, which can send photos wirelessly to the camera roll on any of your iOS devices on the same wifi network. Once in the camera roll, you iOS device will be added to your photo stream.

My emails are appearing along the top of the page in the tool bar area? how do i get rid of this and back to the regular email page

I opened my Mozilla yesterday and noticed my email page format was different then after a second, I noticed all my emails were now appearing along the top of the page in the tool bar area below "Fine Edit View Go ...etc" I'm not sure what happened. PLEASE help me I'm sure it's probably an easy fix, however I don't know how to fix it :)~ Also they are oldest email first, and since I normally save them for 45 days before deleting, I cant seem to get to the most recent email first. Ugh.
Truly appreciate your help.

This is what happens when you continually open messages in tabs but never close them. Pretty soon all you have are message tabs showing and you have pushed the Inbox off the screen.
Get in the habit of closing message tabs after you read them.
To get out of your situation now, right click one of the tabs and select Close Other Tabs. Then use the x to close the last one.

Error : The Measures hierarchy already appears in the Axis0 axis.

Hello I wrote a simple MDX query and getting the error :The Measures hierarchy already appears in the Axis0 axis.
WITH
MEMBER [Measures].[x] AS
--CASE
--WHEN [Terminals].[Terminal Type Name].[OEM - Over the Counter PC] THEN 'OEM'
--ELSE
-- 'ABC'
--END
[Terminals].[Terminal Type Name].[Terminal Type Name].CurrentName
SELECT
[Measures].[Amount]
ON COLUMNS
NON EMPTY
[Measures].[x]
ON ROWS
FROM [MyAwsomeCube]
mark it as answer if it answered your question :)

Hi Parry2K,
Based on your information, you get the "The Measures hierarchy already appears in the Axis0 axis." when executing the MDX query. Right?
In Analysis Services, the measures in MDX are metrics value stored in your Fact Tables. Measures are used to analyze performance of the Business. Measure usually contains numeric data, which can be aggregated against usage of associated dimensions. So in
a MDX query, we can't just have one measure on rows and other measure on columns. In your scenario, the calculated member is a measure, so it will throw the error. you can either change a dimension on columns or put both measure on same axis.
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking

Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
thanks everyone

BaconHouseVidz wrote:
… at the same time…
in hope to speed things up?
no, no effect.

How is it possible to draw a graph using without any label along the x-axis

Hi,
I created a bar-graph using the tabular data below:
public List getTabularData() {
List list = new ArrayList();
String[] rowLabels = {"Allocation","Forecast", "Bookings", "Loaded"};
for (int r = 0 ;r<rowLabels.length ;r++ ) {
if ( r == 0) {
list.add(new Object[]{"Alloc/Forecast",rowLabels[r],new Double(_allocation)});
if ( r == 1) {
list.add(new Object[]{"Alloc/Forecast",rowLabels[r],new Double(_forecast)});
if ( r == 2) {
list.add(new Object[]{"Booking/Loaded",rowLabels[r],new Double(_bkg)});
if ( r == 3) {
list.add(new Object[]{"Booking/Loaded",rowLabels[r],new Double(_loaded)});
return list;
This is creating a two groups "Alloc/Forecast" and "Booking/Loaded". Group labels are shown in the x-axis.
But I don't want to show the labels. Instead, only the graph with two groups without any labels in x-axis. How is it possible ?

User,
I haven't tested this at all - you may want to have a look at the [url http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e12418/tagdoc/dvt_o1TickLabel.html]dvt:o1TickLabel component to see if it can suppress the labels.
John

Align layers along the x-axis

Hi
how can i align the x axis of all layers along the blue line in this picture via expression?
basically the x-axis points then towards to the middle of the Comp.
<a href="http://s3.directupload.net/file/d/2029/iam4zhrw_png.htm" target="_blank"><img src="http://s3.directupload.net/images/100104/temp/iam4zhrw.png" border="1" title="Kostenlos Bilder und Fotos hochladen"></a>

Create a Null in the center, then add a lookAt(position,thisComp.layer("Null").position) to the 3D orientation property.
Mylenium

Why do 3 images appear on the quick launch instead of one?

I installed Firefox 14.0.1 and when I click the first time on the quick launch icon and Firefox loads correctly, immediately 3 layers of the icon images appear on the quick launch. and when I "RED X" out and go back in I get a half screen of my bookmarks in gray!

YOU BETCHUM!!!!! ALL GOOD NOW!
Thanx Tyler
P.S. - I don't remember doing that - Could 14.0.1 defaulted to that scary setup?

Ffu in a red background, appearing in the taskbar for a short time, is this Firefox updating?

Hello,
sometimes for a very short time three letters: Ffu on a red background appear in the taskbar. Does this have something to do with firefox updating? I just noticed that new symbol next to my other icons and it disappears very quickly.
Thanks in advance for your answer!
Sonja

Its actually ffd your seeing, probably only pops up when you use vlc mediaplayer or another offbrand media player, its just saying theres some sort of error when reading a codec, i actually get it constantly, dont worry tho its not a virus.
Hope this helped

Hierarchy already appears in the Axis0 axis

As per the business requirement I need to fire a query that looks like this
Select
{[Sales Territory].[Sales Territory].
Children}
{[Product].[Class].
Children}
ONCOLUMNS
{[Measures].[Reseller Average Unit Price]}
ONROWS
From[Adventure Works]
where
{[Sales Territory].[Sales Territory].[Country].&[Germany]}
I cant just put the where clause in the select part. Is there any way to do this.Please help

Hi,
You cannot use the same hierarchy on another axis.
Although you could use [Sales Territory].[Sales Territory] and [Sales Territory].[Sales Territory Country].&[Germany] on different axis because they are not the same hierarchy, it seems it does not give results. But it does not give a
technical error. That's why it is preferable to use members instead of children as in your case you don't need the children of a particular member.
if you want to put the where clause into the select and use children anyway, a work around is to use exists and this works:
SELECT
Exists
[Sales Territory].[Sales Territory].Children
,[Sales Territory].[Sales Territory Country].&[Germany]
{[Product].[Class].Children}
} ON COLUMNS
,{{[Measures].[Reseller Average Unit Price]}} ON ROWS
FROM [Adventure Works];
Philip,

Wouldn't it be nice that I could have the choice of which application appears in the lock screen instead of a fixed camera app?

Well, as I stated in my question, I would like to have a choice of which app to put into the lock screen as a short cut, you know each one of us has different kind of needs. And I just don't want to jailbreak my phone, coz don't get me wrong, I LOVE my iPhone 4!

Tell Apple.
We are all iphone users just like you.
http://www.apple.cm/feedback

HT1175 "In the pop up window that appears, enter the password for your AirPort Time Capsule."

And where is that?

Thanks for your effort, Bob. But I havn´t even "set up" yet. I just started. And the instructions talks about "password" as well as the responds from my mac, but I do not know where to find it. It used to be, on other machines, on a label at the cover.
Nowhere can I read "you will find the password ...". And I have tried all the possible codes from the label but nothing works. // GL

Set data for the x-axis

Hi,
I made a program which allows the user to configure and measure Temperature and voltage using a DAQ device. I also set a possibility for the user to save his data of his test to lvm file and then upload and read it on a waveform chart. My problem is that while the user gets multiple plots represented in the y axis (the different Temperature/voltage channels signals of the DAQ), the x-axis is set to time by default.
How can I change it? I would like to allow the user to change the x-axis from time to one of the plots of his tests data.
for example, lets say I get 2 signals of temperature (mod1/ai0 and mod1/ai1) and 2 signals of voltage (mod2/ai0 and mod2/ai1) on the y axis (amplitude) during 3 hours (represented in x-axis) and I would like to allow the user the option to play with the data so he can see temperature on the y axis as a function of the voltage on the x axis (instead of time) and the option to configure any kind of combination while the program is running (set mod1/ai0 in the y-axis and mod2/ai0 in the x-axis, for instance).
I have tried various things but nothing seems to work. It looks like it is very easy to change plots between multiple Y-axis with property node of "Active plot" and "Y scale index" but I can't figure out how to change plots from the Y-axis to X-axis and vice versa.
I hope this clumsy message is somehow clear..
Thanks a lot in advance,
Shahar L.
Detectomat Gmbh
Hamburg, Germany

Hi Shahar,
You will have to use an XY graph, not a waveform chart, if you want to set the X-axis data. Under "Find Examples", see "Fundamentals"..."Graphs and Charts" for some examples of XY-graphs and how to use them. You can't change the X-axis data of a waveform chart, as you have discovered.
Hope this is helpful...
Diane

How to change the side of the y axis in numbers ?

I am trying to make a negative only chart (all the x values are negative), thus the y axis has to be on the right, yet it is displayed on the left ! I really need some help please. Thank you !

Hi Rupert,
Here's an alternate method.
Ian's suggestionis the only one I know using a scatter chart, but Numbers also offers a '2-axis' Category chart. It's the last one on the menu in the Charts button, requires two series of Y values, and defauts to a line chart for the first series and a column chart (vertical bar chart) for the second Y series.
The two (Y) axes may have different scales, and may be formatted separately. Here's an example. Instructions below.
The data columns are column B (X values) and column D (Y values).
Because this is a Category chart, the X values must be listed in a header row, where they will be recognized as 'category labels' . As 'categories', they will be evenly spaced along the x axis, and wil be ordered left to right in the order they appear (top to bottom) in column A of the table.
2-Axis charts require a table with two columns of Y data. To provide the second 'data' set, I've added column C, and filled it with zeroes.
To create the chart, select columns C and D, then click the Charts button and select the Two-Axis chart.
With ther chart selected, open the Chart Inspector.
Choose Axis.
Uncheck "Show Values" using the pop-up menu for Value Axis (Y1)
Check "Show Axis" using the pop-up menu for Value Axis (Y2)
Set min and max values and steps to values that will give you integer labels for the Y value grid lines.
Choose Series.
Click on the colour block (on the table) for the dummy series (Y1).
Set Data Symbol to 'none'. Use the Line thickness control in the format bar to set the line thickness to 0.25 pt and the colour to black.
Click on the colour block for the 'real' series. Set the data symbol and size, and the line thickness as desired.
Regards,
Barry

I want the minimum of the horizontal axis to be the first day of the month.

I have a situation where I want the minimum of the horizontal
axis(with date time axis) to be the first day of the month. I
attempt it like so:
var max:Date = new Date();//current date is our max from
which we will calculate the min
var min:Date = new Date(max.fullYear,max.month,1);
dateTimeAxis.minimum = min;
However this first date on this axis is the last day of the
previous month for example 31 August instead of 1 September. Any
ideas how to fix?

Nikos, the only thing I can think of (off hand) is that it's
defaulting to "zero" hour on that date, if you tried:
var min:Date = new Date(max.fullYear,max.month,1,13);
Would that make it work? That would set the date to 1pm.
Have you considered defining the axis with the data you are
binding to?
Cheers,
David

Datapoints appearing along the X axis instead of Time

Similar Messages

Maybe you are looking for