DataSocket Server will not start when the Launch DS Server if Local URL.VI is bundled into a LabVIEW application.

I want to run a LabVIEW application on several machines remotely that do not have LabVIEW installed (licensing issues). Hence I have built a LabVIEW executable with the RunTime Engine to install on all of these remote machines.
The VI has a bi-directional link, using Datasockets, to a machine with DAQ and Image acquisition functions. It primarily receives data items, but also the capability to change data items so it needs to run the "Launch DS Server if Local URL.VI" in order to publish data to the DataSocket server.
When I run the pre-built VI on a machine that has LabVIEW Developers Edition installed, everything works fine - ie.
the DataSocket server starts on the remote machine. However when I build the *.exe application and run it on a machine with and without LabVIEW Developers Edition installed the VI successfully subscribes to the DAQ and Image Acquisiton machine, but it does not start its own connection to the Data Socket server, and hence does not publish the data that the DAQ machine needs to suscribe to. IT seems that the Launch DS Server if Local URL.VI is bypassed? I have fiddled around with the Build settings but to no avail.
In short, how do I get the DataSocket Server to run in a LabVIEW executable? Is it indeed possible? Any advice would be welcomed.
When distributing a Labview Application (*.exe) with Data Socket Server Publish functionality, the DataSocket server does not start and hence no data can be sent by the Remote PC to the Server. The VI successfully retrieves data from the DS Server. I have used the "Launch DS Server if Local URL.vi" in the ditributed application but for some r
eason this VI is not executed when I run the executable. How can you force the DataSocket Server to run with executable LabVIEW applications?

Ryan,
How to add Datasocket Server Control.vi?
Source Files only show Project Files.
So, I added Datasocket Server Control.vi file to the project first.
Then I added it to Always Included < Source Files < Application Properties (Build Executable).
Last, I built the Executable, but it didn't work.
Can you help me.
Thank you.
Pedro Raposo

Similar Messages

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

Have a look at these. And please say what OS you have.
http://support.apple.com/kb/ts1411
http://support.apple.com/kb/ts1367

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

Publishing point is not starting in the windows media server

In the setup VCS expressway starter pack is used as call controller & the endpoints are registered to it. TCS is used for recording. A existing publishing point is used for live streaming using windows media server. This publishing point is not started when the recording starts for this recording alias. Windows media server is running locally in the TCS. I could see the below in the server logs. Please note that this setup has worked with this configuration for more than a year and it stopped working now. Your help on this greatly appreciated. Thanks.
13   2015-05-05T14:15:55+03:00   Info: Incoming call [address = 1000, address_type = CALLADDRESS_E164_ALIAS, call_id = 1, protocol = H323, rate = 5952]
14   2015-05-05T14:15:55+03:00   Info: Getting conference binding [booking_address = 003] - No binding found, proceeding with ad hoc call
15   2015-05-05T14:15:55+03:00   Info: Checking recording start time [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = , record_delay = off]
16   2015-05-05T14:15:55+03:00   Info: Creating recording [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = ]
17   2015-05-05T14:15:55+03:00   Info: Handling RTP packet [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = , time_since_first_packet = 1907] - Started writing media
18   2015-05-05T14:15:55+03:00   Info: Creating call [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, remote_address = 5001]
19   2015-05-05T14:15:55+03:00   Info: Updating temp RTP filename in DB [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, temp_rtp_dump_file = e:\livedata\RTP150505141555_1.ogg.tmp]
20   2015-05-05T14:15:55+03:00   Info: Setting call state to alive [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, playback_number = 1520] - Found playback number
21   2015-05-05T14:15:55+03:00   Info: Setting call state to alive [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, playback_number = 1520] - Found playback number
22   2015-05-05T14:15:56+03:00   Diagnostic: Setting playback main video frame rate [frame_rate = 30]
23   2015-05-05T14:15:56+03:00   Info: Starting decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, bitrate_kbps = 128, channel = audio, payload_type = AAC-LD]
24   2015-05-05T14:15:57+03:00   Info: Starting decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, bitrate_kbps = 4000, channel = video, payload_type = H.264]
25   2015-05-05T14:15:57+03:00   Info: Decoding video, Message from decoder [call_id = 1, decoder = Codian Video, message = Initialized H.264 decoder]
26   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
27   2015-05-05T14:15:57+03:00   Info: Finding output size; bucketing [optimal_output_size = 1280x720(16:9), output_bucket = 796x448, size_ext = 1280x720(16:9), size_main = 512x288(16:9), squared_ext = 1280x720(16:9), squared_main = 512x288(16:9)]
28   2015-05-05T14:15:57+03:00   Info: Transcode settings [extended_frame_rate = 0, extended_size = 1280x720(16:9), layout = 2, main_frame_rate = 0, main_height_ratio = 0, main_size = 512x288(16:9), negotiated_bitrate_kbps = 4128, output_bitrate_kbps = 800, output_frame_rate = 30, output_frame_rate_max = 30, output_size = 796x448(199:112), quality = 2, quality_bitrate_kbps = 800]
29   2015-05-05T14:15:57+03:00   Info: Setting up encoding [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, template = <transcode conference_id="904e92bb-9152-4ced-bf29-165f521e34b2" thumbnail_path="E:\data\www\slides\904e92bb-9152-4ced-bf29-165f521e34b2\thumbnails\"><clips action="transcode"/><metadata name="mxe-unicast" speaker="" copyright="" keywords="" description="" date="1430824555"/><writer source="pipnopip"><template codec="windowsMedia" delivery="DELIVERY_ON_DEMAND" qualitybitrateK="800" layout="pipnopip" piplocation="top/right" quality="Medium"/><output type="file" guid="e1ab0747-bbb4-44f0-b7de-2644e3921e63" directory="E:\data\media\"/><output multicast="false" multicast_address="" multicast_port_start="0" multicast_ttl="0" type="serverpush" guid="e952a7fc-87dc-4944-b26a-064c9897c3de" wwwdir="E:\data\www\" server_name="xxx.xxx.xxx.xxx" username="admin" password="********" port="8080" publishing_point_copy="" publishing_point=""/></writer><callinfo bitrateK="4128" hasaudio="true" hasextended="true" hasvideo="true" videoFrames="0" extendedFrames="0" duration="0" mainres="512x288" maindar="16:9" extres="1280x720" extdar="16:9"/></transcode>]
30   2015-05-05T14:15:57+03:00   Diagnostic: Setting thumbnail timer zero point [call_id = 1, zero_point = 0]
31   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
32   2015-05-05T14:15:57+03:00   Info: Decoding audio, Message from decoder [call_id = 1, decoder = Codian Audio, message = Initialized AAC-LD decoder 128000bps]
33   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
34   2015-05-05T14:15:58+03:00   Last message repeated 5 times
35   2015-05-05T14:15:58+03:00   Info: Setting output path [call_id = 1, path = e:\livedata\143082455700-82801609.wmv]
36   2015-05-05T14:15:58+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
37   2015-05-05T14:16:04+03:00   Last message repeated 25 times
38   2015-05-05T14:16:04+03:00   Info: Checking memory use [private_MB = 460, private_MB_previous = 118, ram_free_MB = 3245, vm_used_MB = 597, vm_used_MB_previous = 201, working_set_MB = 184]
39   2015-05-05T14:16:08+03:00   Warning: Reporting Windows Media writer status, Error occurred in WMT_ERROR [call_id = 1, address = http://xxx.xxx.xxx.xxx:8080/_3868463432921, error = error code = (0x80072eef)]
40   2015-05-05T14:16:08+03:00   Info: Adding Windows Media serverpush output [call_id = 1, async = 0x80072eef] - After wait

The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/

Message server will not start on AIX 6

I have a standard ECC6 system running the 185 kernel and ORACLE 10.2.0.2 on AIX 6. which is giving me a problem. I also have 2 other systems apparently with the same configuration which operate perfectly.
The problem I have is that if I stop the system the message server will not start. If I wait until the following day the message server starts pefectly. I have not been able to test stopping the system and waiting an hour or so and then restarting in the same day, so I do not know if the overnight wait is relevant.
dev_ms contains the following:
[Thr 01] Fri Jun 19 23:58:54 2009
[Thr 01] WLM Tag 'HQS/MSG' successfully set for this process
[Thr 01] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   324 (IBM RS/6000 with AIX)
relno      7000
patchlevel 0
patchno    163
intno      20050900
make:      multithreaded, ASCII, 64 bit, optimized
pid        254088
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 254088) [msxxserv_mt. 1835]
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp
p 3227]
[Thr 01] *** ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 8
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:3950) [nixxi.cpp    3227]
[Thr 01] *** ERROR => MsSCommInit: NiBufListen(3950) (rc=NIESERV_USED) [msxxserv
_mt. 10186]
[Thr 01] *** ERROR => MsSInit: MsSCommInit (internal) [msxxserv_mt. 1886]
[Thr 01] *** ERROR => main: MsSInit [msxxserv_mt. 5951]
[Thr 01] ***LOG Q02=> MsSHalt, MSStop (Msg Server 254088) [msxxserv_mt. 5999]
Regards,
Paul Richardson
Certified Netweaver, Portal and Migration Consultant
Sandpiper I.T. Ltd

Hi,
Thr 01 ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp p 3227]
Looks like port 3227 is already used. You can check the ports by netstat -a -n from your command prompts. Also check your settings in /etc/services and /etc/hosts files.
Check your filewall rules/disable antivirus if any and give a go.
Hope this helps.
Manoj

Logic X playhead will not start at the beginning of project.

Logic X playhead will not start at the beginning of project. When I push play, it starts from a point from which I was working earlier. When I press play from beginning, it will only play from that other point. I've tried saving the project with the playhead at the beginning, after dragging it there, then closing and re-opening the project but it still starts playback at that undesired point!...even when I push the stop button twice, (go to beginning) it does not go!...Why does this happen?

It is behaving as though there is a marquee at that point but I did not have one... I placed one at a different point and it played from there (normal) but when I turned it off, it went back to my 'problem' point! And, after mousing around with a few marquees and playhead 'drags', it was "fixed"... But I never knew what the problem stemmed from... And...It tends to happen on occasion, in different projects.... I'll continue to monitor these glitch events, and keep you posted!

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.

Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server.

After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server. I have already tried the resetting with power swich and home button and plugging into computer but it says the "iPhone software update server cannot be contacted." I am locked out of my phone. Does anyone have any idea how to resolve this issue and get the phone working again. I will add that I am now trying to restore it on a different computer with a lower version of itunes, but the computer that it initially happened on had the updated itunes and gave me the same result ... nothing. Thanks for your help in advance.

Try going to recovery mode as described here. You may have to try this more than once to succeed.
Use the original iTunes that the iPhone synced with.
http://support.apple.com/kb/HT1808

After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail

After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail

Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.

I am trying to start a movie and it will not start. The message is "an error occurred in loading this content". Has anyone had this problem before?

I am trying to start a movie and it will not start. The message is, "an error occurred loading this content". Has anyone had this message before? Any solution?

Hi there TonyCashio,
You may find the troubleshooting steps in the article below helpful.
Apple TV (2nd and 3rd generation): Troubleshooting playback performance
http://support.apple.com/kb/TS3623
-Griff W.

The Macbook Pro will not start past the grey Apple logo screen? Any help will be most welcome?

The Macbook Pro 13, late 2009 will not start past the grey Apple Logo screen? Any help will be most welcome? Thanks

Have you tried booting with the install disc that came with your computer?
Find it and then run Disk Utility to verify your hard drive. If errors are found, try to repair the disk.
It sounds as if the hard drive might be failing.
Clinton

Lightroom will not start up the message I get is

A problem caused the program to stop working correctly Windows will close the program and notify you if a solution is available.
Lost

Thank you I'll try that
Date: Wed, 16 Nov 2011 13:54:08 -0700
From: [email protected]
To: [email protected]
Subject: Lightroom will not start up the message I get is
    Re: Lightroom will not start up the message I get is
    created by web-weaver in Photoshop Lightroom - View the full discussion
Try it one more time - unless you have tried it already more than once.If the message appears again, you have to re-install LR.You can download the latest version from Adobe using your Serial key #.WW
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4030407#4030407
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4030407#4030407. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Please help my iMac will not start. The apple logo comes up and the wheel goes round and then I am left with an empty white sceen can anyone help

Please help, my iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen. Has anyone any ideas.

Locate your original install disk (it's grey) and use it to restart your iMac by holding the "C" key during startup. Use the disk utility to repair your harddrive.

DataSocket Server will not start when the Launch DS Server if Local URL.VI is bundled into a LabVIEW application.

Similar Messages

Maybe you are looking for