DATASOURCE 0FI_GL_6, i am GETTING '0'RECORDS IN RSA3.

We are trying to extract GL DATA.
I AM USING THE DATASOURCE 0FI_GL_6.WE R GETTING '0'RECORDS IN RSA3.IS THERE ANY SETTING REQUIRED TO GET THE DATA?
we r using R/3 (ECC5 ) AND BW 3.5 ( We are on 2004s )
We decided to go ahead with 0FIGL_C01 cube. , and I believe, the old datasource 0FI_GL_1 is replaced by 0FI_GL_6 with delta capability. And even I see there is new Datastore object 0FIGL_O06.
In my Production System, I check the Table - GLT0.
it is showing NO Table Entries Found.
How come It's ? This is Production System.
am i checking Right Table ( GLT0 )
is there any other settings i have to do, to get the data in GLT0 table
PLZ HELP US THE IN SOLVING THE PROBLEM.
THANKS
JASHAIK.

Hi SJA,
0FI_GL_6 datasource is based on the GLTO (totals table) in R/3. You are right.
I believe, the GLTO table gets populated from the basic entries done in the BSEG and BKPF tables for GL line items.
Check with the FI/CO consultant in the team and see if the config is done on their side to maintain data in GLTO table. If this is not done, then I dont think you can use this datasource. Check with the R/3 folks, if GLTO would be populated in the near future. If not, then you might have to work with 0FI_GL_4 datasource (which brings line item records and only after images, so make sure to use an ODS) and then aggregate the records in the cube as per specific user requirements,
Hope this helps.
Assigning points is a way of saying thanks on SDN!
Regards
Prakash

Similar Messages

Getting zero records while extracting data from R/3

Hi friends,
I have a cube to which data was getting loaded earlier in qulaity system. But i came acorss some issues with the loads. The issues were that everytime a load was run it was extracted with Init with some selection, i was wondering why did they do Init instead of repair full . After doing some investigation i came to know that this data source is not supporting Init without data transfer, so i think thats why they have done Init.
I have deleted the requests from the cube until the point where there were incorrect loads and started to do Init again from 10.01.2010 to 31.12.9999. When i run the RSA3 i can see about 65,000 records but when i run the Init or full Load i am getting zero records. Not able to load the data can anyone please tell me where am i going wrong?
I am using data source 0UC_SALES_STATS_02 (IS-U datasource).
Thanks in advance.
Regards
BN

Hi prashant,
Thanks a lot for your quick reply. But there is no Init flag available, becuase it was already deleted.
If it was existing then the system would popup a message saying that there is a init already existing and proposing me to delete it ,and it will not allow me to run the Load without deleteing the flag.
So, the issue is not with the Init flag.
Regards
BN

CUBE Not getting All records from DSO

Hi Experts ,
We have a situation where we have to load data from a DSO to a Cube . The DSO contains only 9 records and while we r loading the data into cube , the cube is only getting 2 records . Thus 7 records are missing. Also The Cube contains more Fields than DSO. in the transformations , for the extra fields we have written end routine and those extra fields will get data by reading master data .. Any pointers how to get the missing records or what is the error ...
Sam

Why multiple threads ????

Info Cube not getting full records

Hi All,
I am extracting data from the flat file (60k records..of which most fields have binary values),, am getting the values into data source..but when loading from data source to info cube am not getting total records..
the load is successful and it is showing as transferred 60k records and added 510 records in the manage tab of the info cube.
what would be the problem ....any help is appreciated.

Hi,
Data with same combination for characterstic is added and only for unique charactersitc value it will give new record.
Material---Customer-Price
10002----- C1--
20
10002----- C1--
20
10002----- C1--
20
10002----- C2--
20
SO As you can see in flat file 4 records are there but in inofcube it will be only 2
Data with same combination of charactersitc is added and with unique combo only it will display.
Hope it clears you.
Also in addition please check the data in flat file.
Regards,
AL

Not getting all records in pagination

I am also have a problem getting all records in the report as the post on Apr. 21,2004. My reports pagination stops at 500. When I set the 'max row count' to 100000. The pagination at the bottom of my page disapears. When I leave 'max row count' empty, it only goes from 1-500. No way to view records past the 500th record.
I see there was a post on Apr. 21, 2004 about the same thing but it did not specify a fix or work around or if I'm missing a setting. (also tried the log off/on but did not help).
*My pagination Scheme is 'Row Ranges 1-15 16-30 in select list(wiht pagination)'
*My report has 1000+ records.
Thanks, Paula

The actual number of rows supported by the select list depends on how many rows you show on each page. If you go with the default of 15 rows, you would be able to use the select list with close to 5000 rows. If you increase the number of rows per page, the select list will work with even more rows.
If the select list can't be used, it may make sense to consider using the "row ranges with set pagination" style. Set pagination lets you navigate from one set to the next instead of one page to the next, so you can navigate through your result set a lot quicker.
However the best option for reports with that many rows would be "row ranges x-y", without showing the total number of rows. The reason is that the report renders a lot faster if you don't have the total number of rows calculated. In order to better be able to find certain records, I would recommend a search field on your report page that lets you filter the result set.
Hope this helps,
Marc

Full update not getting all records from PSA to ODS

Dear BW Masters,
I am working with MM module. Iam using standard extract structure 2LIS_02_ACC
Iam doing full update. Getting full data 1300 records in to PSA. But getting only 298 in to my ODS. I tried changing fields in to KEY FIELDS AND IN TO DATA FIELDS in my ODS
But could not get data.
Pls help me..i have dead line before that i need to complete report on the same.
Its happening with the other HDR and ITM extractors.
PLs help me..

Hello,
Look at this example:
R/3 Record:
CustNo | Name | Order | Amount
1234 | Customer1 | Order 1 | 100
1235 | Customer2 | Order 2 | 200
1234 | Customer1 | Order 3 | 300
If Cust.No is Keyfield, In BW you will get 2 records
1234
1235
If Order No is Key field, you will get 3 records.
It is not necessary to get the same no of records as they are in R/3.

How get all record from master and matching record from detail

hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamir

hi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid

How to get latest record on top of the result list

Hi Gurus,
How to get latest record on top of the result list when you open the record.
saved data method in BT120H_CPL of OverView page and result list in ICCMP_INBOX.
Regards,
Ravi

Hi
Try sort descending by on fileld "changed at ".
manipulate the sort depends on your requirement
Regards
Logu

How to get multiple records using fn-bea:execute-sql()

Hi,
I created Proxy service(ALSB3.0) to get records from DB table. I have used Xquery function(fn-bea:execute-sql()). Using simple SQL query I got single record, but my table having multiple records. Please suggest how to get multiple records using fn-bea:execute-sql() and how to assign them in ALSB variable.
Regards,
Nagaraju
Edited by: user10373980 on Sep 29, 2008 6:11 AM

Hi,
Am facing the same issue stated above that I couldnt get all the records in the table that am querying in the Proxyservice.
For example:
fn-bea:execute-sql('EsbDataSource', 'student', 'select Name from StudentList' ) is the query that am using to fetch the records from the table called StudentList which contains more than one records like
Id Name
01 XXX
02 YYY
03 ZZZ
I tried to assign the result of the above query in a variable and while trying to log the variable, I can see the below
<student>
<Name>XXX</Name>
</student>
I want to have all the records from my table in xml format but it's not coming up. I get the value only from the first row of my table.
Please suggest.
regards,
Venkat

Data merging: how to get multiple records in single text frame?

Hi
I'm experimenting with data merging in InDesign CS3. The biggest stumbling block I've come across is trying to get my records to flow as continuous text in a single text frame (which would, ideally, autoflow onto new pages in the document). The records vary considerably in length, and so I can't just create a standard text frame to repeat on the page.
Perhaps data merging isn't the best way of doing this and I should be learning to script instead. I feel like I'm just one step away, though.
Any suggestions would be appreciated.

OK, new scenario now:
Is it possible to set a text box to auto-resize to fit the content that comes in during the data merge?
I have placed one of my data fields in a text box with a stroke and fill, and placed this as an anchored object in the main text box with the other fields. The problem is that the length of text in this field varies considerably, and I'd like the text to fit snugly within its box. Ideally this text box would not appear at all if the field is blank for a particular record.
I hope I've explained all of that clearly enough. Any ideas?

How to get the record set into array?

Hi,
I want to get the record set into array in the procedure and do the processing of the array later in procedure.
below is the stored procedure i am working on:
procedure bulk_delete_group(p_group_id in Array_GroupListID) as
begin
for i in p_group_id.first..p_group_id.last loop
--Here I have to get the list of user id before deleting group
SELECT user_id into *<SOME ARRAY>* FROM group_members WHERE group_id = p_group_id(i);
DELETE group WHERE group_id = p_group_id(i);
--Process the user id array after group deletion..
end loop;
end bulk_delete_group;
Thanks in advance
Aditya

Something like this ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.20
satyaki>
satyaki>
satyaki>select * from emp;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      9999 SATYAKI    SLS             7698 02-NOV-08      55000       3455         10
      7777 SOURAV     SLS                  14-SEP-08      45000       3400         10
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
      7566 JONES      MANAGER         7839 02-APR-81       2975                    20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
      7782 CLARK      MANAGER         7839 09-JUN-81       4450                    10
      7788 SCOTT      ANALYST         7566 19-APR-87       3000                    20
      7839 KING       PRESIDENT            17-NOV-81       7000                    10
      7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
      7876 ADAMS      CLERK           7788 23-MAY-87       1100                    20
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7900 JAMES      CLERK           7698 03-DEC-81        950                    30
      7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
13 rows selected.
Elapsed: 00:00:02.37
satyaki>
satyaki>create type np is table of number;
2 /
Type created.
Elapsed: 00:00:03.32
satyaki>
satyaki>Create or Replace Procedure myProc(myArray np)
2 is
3    i   number(10);
4    rec emp%rowtype;
5 Begin
6    for i in 1..myArray.count
7    loop
8      select *
9      into rec
10      from emp
11      where empno = myArray(i);
12
13      dbms_output.put_line('Employee No:'||rec.empno||' Name:'||rec.ename);
14    end loop;
15 End myProc;
16 /
Procedure created.
Elapsed: 00:00:00.88
satyaki>
satyaki>
satyaki>declare
2    v np:=np(9999,7777);
3 begin
4    myProc(v);
5 end;
6 /
Employee No:9999 Name:SATYAKI
Employee No:7777 Name:SOURAV
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.30
satyaki>Regards.
Satyaki De.

How can I get Video Recording! on my Blackberry curve 8320 ???????????? HELP PLEASSEEEEE

Hi, Im a bet stressed out i just got the blackberry Curve 8320 from Tmobile and realized it has no Video recording however the person that sold it to me says they downloaded a program like a converter or something and they used to have video recording on it. Can you please tell me how i can get video recording on mine Please. Thank you.

to use video you need an upgrade. The name is handheld device software OS. I believe you have 4.2. 4.5 is required.
You have to wait for TMobile to release the 4.5 OS.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Can't Get Manual Recording To Work

I have been unable to get manual recording to work and thought this was something to do with having dual monitors. I have now disabled my second monitor, and it is still not working for me. It's possible that I have done something wrong or have misunderstood what manual recording is.
To that end I have made a 3 minute video showing you the steps I took while attempting a manual recording of just three print screens. Please could someone take a look ta the video and tell me if what you see is expected behaviour. Thank you.
manual-recording.mp4 - Google Drive

Thank you for taking a look at the video Rick. You can probably tell this problem is driving me mad.
I did as you suggested but it made no difference to the outcome. So next I uninstalled Captivate, and re-installed with only one monitor active, just in case that mattered. I then kept it at one monitor but even with only one monitor videos appear in my manual captures.
So next I re-enabled my second monitor and ran the test again. On monitor 1, video is included no matter what, and on monitor 2 it isn't. I have filed a bug report with Adobe but so far the response has been to try running it as administrator and also to check the error logs. I checked those and there is nothing but informationals in there.
I also ran the entire test when running as an admin, and the results were the same.

Help needed to get unique record from an internal table

Hi Everybody,
I have to get unique record from an internal table. i know we can use read statement with key condition .
But the problem is i have to use some relational operators like GE or LE.
eg
read table itab into wa with key width GE itab-widthfrom
                                                   width LE itab-widthto
                                                   machno eq itab-machno.
Its giving me error when I use the operators GE , LE.( I think since it can't find a unique record with those relational
operators in the with key statement)
Is there any other way to get unique record from internal table without using the loop?
Thanks,
Sunny

Using the read statement you will need some kind of loop. For example.
DO.
READ TABLE......
WITH KEY ......
                    READ = SPACE
IF SY-SUBRC EQ 0
TABLE-READ = 'X'.
MODIFY TABLE
ADD 1 TO W_FOUND.
ELSE
EXIT.
ENDIF
ENDDO.
IF W_FOUND EQ 1.
...record is unique.
ENDIF.

Query to get the records with same last name

I need to write a single sql query to get all records with duplicate last_name's. For example, if tab1 has 4 records:
10     Amit     Kumar
20     Kishore          Kumar
30     Sachin     Gupta
40     Peter     Gabriel
then the query should return
10     Amit     Kumar
20     Kishore     Kumar
id, name,L_name being the 3 columns in table
Apprecite you help.
Thank you
Mary

SQL> create table mytable (id,name,l_name)
2 as
3 select 10, 'Amit', 'Kumar' from dual union all
4 select 20, 'Kishore', 'Kumar' from dual union all
5 select 30, 'Sachin', 'Gupta' from dual union all
6 select 40, 'Peter', 'Gabriel' from dual
7 /
Table created.
SQL> select id
2       , name
3       , l_name
4    from ( select t.*
5                , count(*) over (partition by l_name) cnt
6             from mytable t
7         )
8   where cnt > 1
9 /
                                    ID NAME    L_NAME
                                    10 Amit    Kumar
                                    20 Kishore Kumar
2 rows selected.Regards,
Rob.

DATASOURCE 0FI_GL_6, i am GETTING '0'RECORDS IN RSA3.

Similar Messages

Maybe you are looking for