Full update not getting all records from PSA to ODS

Dear BW Masters,
I am working with MM module. Iam using standard extract structure 2LIS_02_ACC
Iam doing full update. Getting full data 1300 records in to PSA. But getting only 298 in to my ODS. I tried changing fields in to KEY FIELDS AND IN TO DATA FIELDS in my ODS
But could not get data.
Pls help me..i have dead line before that i need to complete report on the same.
Its happening with the other HDR and ITM extractors.
PLs help me..

Similar Messages

In full update not getting all records

Dear BW Masters,
I am working with MM module. Iam using standard extract structure 2LIS_02_ACC
Iam doing full update. Getting full data 1300 records in to PSA. But getting only 298 in to my ODS. I tried changing fields in to KEY FIELDS AND IN TO DATA FIELDS in my ODS
But could not get data.
Pls help me..i have dead line before that i need to complete report on the same.
Its happening with the other HDR and ITM extractors.
PLs help me..

Hi
Please post the query in relavent forum. (BI)
You have posted in MM forum for BW help.
Regards
Ramakrishna

CUBE Not getting All records from DSO

Hi Experts ,
We have a situation where we have to load data from a DSO to a Cube . The DSO contains only 9 records and while we r loading the data into cube , the cube is only getting 2 records . Thus 7 records are missing. Also The Cube contains more Fields than DSO. in the transformations , for the extra fields we have written end routine and those extra fields will get data by reading master data .. Any pointers how to get the missing records or what is the error ...
Sam

Why multiple threads ????

Delta package not fetching all records from Delta queue in r/3

Hello,
I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
The Delta has been initialized and everyday the delta is being moved from r/3.
I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
Shouldn't the delta package get all records from the queue on single execution??
Is there some setting to define the nr of records to be loaded?
I'm confused with this behaviour.Please help me understand this behaviour.
Thank You.

Hello,
First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
Hope this helps.
Regards.

How get all record from master and matching record from detail

hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamir

hi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid

IPhone 5 not getting all texts from Galaxy S6

My girlfriend is having a problem not getting all of my texts. As far as we know, it is only happening to texts from my phone. They are showing as sent on the Galaxy S6, but do not show up, ever, on her iPhone 5. The missing messages are random.

Hi there
I’m sorry to hear that there have been some issues with receiving texts. I’d be happy to look into this for you! Can you please send me a private message by Clicking Here and include the following information?
Full name
Cell number
Recipient’s number
Best time to call
Thanks,
Charise

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

Mail not getting all messages from server and other strange behavior

Hello All,
Mail has been doing some odd things for me of late (at least the last week) and I'm lost for a solution to my problem. As far as I can tell, perhaps my Prefs. have become corrupted, or at least something in relation to Mail has become corrupted. Perhaps someone has a solution to this issue before I have to back it all up and NUKE the whole **** app to get back up and running properly.
The main issue I appear to be having is that Mail is not getting all of my Mail messages from my server. I can log into my web-mail interface provided by my domain host and can see there that there are many e-mails that don't appear to be coming down the pipe to the Mail.app client. I'm getting some e-mail's but not all....
*Here are all the things that I've checked:*
• The missing e-mails are not being picked up as Junk and are not in the Junk folder
• I have done a search within Mail for the missing e-mail's and nothing turns up anywhere.
• I have checked on the server end that I'm not maxing out my InBox or that there are any other service issues from my domain host provider.
• I have been into Prefs and checked my account settings - most (see below) of which appear to be as normal and are fine.
*Here are the weird things that I've noticed:*
• When I went into the Prefs. for the account in question, I noticed that my login had changed. For example - it usually it is "[email protected]", however it had seemed to have changed to just "johndoe" - I know this wasn't me as my domain host will not allow me to access any mail unless the login is the full mail address.
• In RULES, every rule I double click to check on seems mostly fine, apart from the fact that every "Account is:" the pull down menu just appears as blank. Usually it says "Account is: ([email protected])"
It's there last 2 items that make me think something is corrupted - so I guess my question is, what pref or file has corrupted and how can I fix it without having to give Mail.app a digital enema?
Any assistance would be most helpful - missing some but not all your incoming e-mail messages is quite annoying, as you can guess...!
Thanks,
Boz

Hello Boz.
This appears to be a rules issue. Mail is almost certainly downloading those messages, but they’re probably being processed by your rules in an unexpected way — given the information you’ve provided, maybe because there is something wrong with the file where the account settings are stored.
Do you have any Mail plug-ins? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/InputManagers/
~/Library/Mail/Bundles/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
<hr>
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Write down your Mail > Preferences > Accounts settings or take screen shots of them.
2. If you have a .Mac account and .Mac synchronization of Mail data is enabled either in Mail > Preferences > General or in System Preferences > .Mac, disable it before proceeding.
3. Quit Mail.
4. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to solve the problem. You can do this in the Finder by dragging the Mail folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is locally stored.
5. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop (to be deleted if this solves the problem). If you have a backup of your data that includes a working copy of this file, you may try restoring it from the backup to avoid steps 6-8.
6. Open Mail. You’ll have to set up your non-.Mac accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done.
7. You’ll have to re-configure some of your Mail > Preferences settings. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
8. As a side effect of re-creating com.apple.mail.plist, Mail might rename Outbox (which is where messages waiting to be sent are stored) to Delivered. The name of that mailbox is actually a misnomer, as it would contain messages (if any) that couldn’t be delivered for some reason. You can delete that mailbox if you wish.
9. If the problem is fixed now and .Mac synchronization of Mail data was enabled at the beginning, enable it again, go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the Mail data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.
<hr>
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

Not getting all records in pagination

I am also have a problem getting all records in the report as the post on Apr. 21,2004. My reports pagination stops at 500. When I set the 'max row count' to 100000. The pagination at the bottom of my page disapears. When I leave 'max row count' empty, it only goes from 1-500. No way to view records past the 500th record.
I see there was a post on Apr. 21, 2004 about the same thing but it did not specify a fix or work around or if I'm missing a setting. (also tried the log off/on but did not help).
*My pagination Scheme is 'Row Ranges 1-15 16-30 in select list(wiht pagination)'
*My report has 1000+ records.
Thanks, Paula

The actual number of rows supported by the select list depends on how many rows you show on each page. If you go with the default of 15 rows, you would be able to use the select list with close to 5000 rows. If you increase the number of rows per page, the select list will work with even more rows.
If the select list can't be used, it may make sense to consider using the "row ranges with set pagination" style. Set pagination lets you navigate from one set to the next instead of one page to the next, so you can navigate through your result set a lot quicker.
However the best option for reports with that many rows would be "row ranges x-y", without showing the total number of rows. The reason is that the report renders a lot faster if you don't have the total number of rows calculated. In order to better be able to find certain records, I would recommend a search field on your report page that lets you filter the result set.
Hope this helps,
Marc

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

Help: Not getting all data from text data type

Hi there
I have a stored procedure that returns a couple of fields and one of the fields is of datatype TEXT. In my ResultSet, I do not get all the data back that is stored in the TEXT datatype. I have say about 600 charactors in this field, but only 30 charactors are returned. Is there a reason why this is happening and how can I fix it?
Please help?
Thanks

I set that field to have a normal string of about 50 charactors. Namely: "this is a note that is about 49 charactosrs long." (exclude the quotes). And I still got 30 charactors back only.
I set a shorter text value of 21 charactors and that returned all 21 charactors.
The text that is usually in this field is:
"URL=SubsidiaryNarrative.html�BABY_CARE_PRODUCTS=false�AIDS_FOR_PHYSICALLY_DISABLED=false�SPORT_SUPPLEMENTS=true�NATURAL_REMEDIES=false�COSMETICS_FRAGRANCE=false�WOMANS_HEALTH=false�ADDITIONAL_CARDS=No�EXERCISE_ROUTINE=Yes�NUMBER_OF_CHILDREN=0"
And I got out "URL=SubsidiaryNarrative.html�B"

Insert statement does not insert all records from a partitioned table

Hi
I need to insert records in to a table from a partitioned table.I set up a job and to my surprise i found that the insert statement is not inserting all the records on the partitioned table.
for example when i am using select statement on to a partitioned table
it gives me 400 records but when i insert it gives me only 100 records.
can anyone help in this matter.

INSERT INTO TABLENAME(COLUMNS)
(SELECT *
FROM SCHEMA1.TABLENAME1
JOIN SCHEMA2.TABLENAME2a
ON CONDITION
JOIN SCHEMA2.TABLENAME2 b
ON CONDITION AND CONDITION
WHERE CONDITION
AND CONDITION
AND CONDITION
AND CONDITION
AND (CONDITION
HAVING SUM(COLUMN) > 0
GROUP BY COLUMNS

DTP does not fetch all records from Source, fetches only records in First Data Package.

Fellas,
I have a scenario in my BW system, where I pull data from a source using a Direct Access DTP. (Does not extract from PSA, extracts from Source)
The Source is a table from the Oracle DB and using a datasource and a Direct Access DTP, I pull data from this table into my BW Infocube.
The DTP's package size has been set to 100,000 and whenever this load is triggered, a lot of data records from the source table are fetched in various Data packages. This has been working fine and works fine now as well.
But, very rarely, the DTP fetches 100,000 records in the first data package and fails to pull the remaining data records from source.
It ends, with this message "No more data records found" even though we have records waiting to be pulled. This DTP in the process chain does not even fail and continues to the next step with a "Green" Status.
Have you faced a similar situation in any of your systems? What is the cause? How can this be fixed?
Thanks in advance for your help.
Cheers
Shiva

Hello Raman & KV,
Thanks for your Suggestions.
Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
Cheers
Shiva

Custom authorization provider for WL7 problem (not getting all parameters from ContextHandler)

I'm implementing a custom authorization provider for WebLogic 7.
In my Access Decision isAccessAllowed method I need to check values of
the parameters passed to an EJB method. Now, if an EJB method I have
two parameters of the same type, for example int, when I get
ContextElement array from ContextHandler and iterate through it to get
names and values of the parameters I get the same value (value of the
first int parameter) from both ContextElement's.
Here is the code:
String [] names = ch.getNames();
for (int i = 0; i < names.length; i++)
String name = names;
System.out.println("name = " + name);//here it gets array of
Strings, which contains two parameter names: "int","int",
which are the types of EJB method parameters
ContextElement[] ces= ch.getValues(names);
for (int j = 0; j < ces.length; j++)
     ContextElement ce = ces[j];
     System.out.println(ce.getName()+ " = " + ce.getValue());
//here if the value of the first int was 2 and the second 0,
it would get 2 from both ContextElements (each of ContextElements will
have name "int"
If I try this with method parameters of different types, for example
int with value 2 and long with value 0, then this code work fine -
first ContextEleement has name int and value 2 and the second has name
long and value 0.
Thanks,
-Oleg Kozlov.

I'm implementing a custom authorization provider for WebLogic 7.
In my Access Decision isAccessAllowed method I need to check values of
the parameters passed to an EJB method. Now, if an EJB method I have
two parameters of the same type, for example int, when I get
ContextElement array from ContextHandler and iterate through it to get
names and values of the parameters I get the same value (value of the
first int parameter) from both ContextElement's.
Here is the code:
String [] names = ch.getNames();
for (int i = 0; i < names.length; i++)
String name = names;
System.out.println("name = " + name);//here it gets array of
Strings, which contains two parameter names: "int","int",
which are the types of EJB method parameters
ContextElement[] ces= ch.getValues(names);
for (int j = 0; j < ces.length; j++)
     ContextElement ce = ces[j];
     System.out.println(ce.getName()+ " = " + ce.getValue());
//here if the value of the first int was 2 and the second 0,
it would get 2 from both ContextElements (each of ContextElements will
have name "int"
If I try this with method parameters of different types, for example
int with value 2 and long with value 0, then this code work fine -
first ContextEleement has name int and value 2 and the second has name
long and value 0.
Thanks,
-Oleg Kozlov.

OdbcDataAdapter.Fill() not getting all rows from RDB using 64bit driver

I am using VS2012 Pro on Windows 7 (64-bit). I am migrating an older 32-bit VS2008 app to the new environment. I'm building for the .NET Framework 4.5.
The app queries an RDB database and uses the Oracle RDB drivers version 3.3.2.0. When I build as a 32-bit app and use the 32-bit Oracle RDB Driver, the query succeeds and returns all 341 data rows. When I built it as 64-bit and use the 64-bit driver, I only
get the first 101 rows.
Oracle says the problem is in the OdbcDataAdapter.Fill() method. I was able to confirm this. I created an OdbcDataReader and used the debugger to see what was being read, I can see all 341 rows, but when I use the DataAdapter.Fill (or DataSet.Load) method,
the results are truncated to 101 rows. Changing the SQL to query different tables does not change the problem. Below is a code sample:
        private DataSet runQuery()
            string connString32 = @"PROVIDER=MSDASQL;DRIVER={Oracle RDB Driver};SVR=myserver;DATABASE=ATTACH 'filename mydatabase';CLS=myclassname;uid=myusername;pwd=mypassword;xpt=2";
            string connString64 = @"PROVIDER=MSDASQL;DRIVER={Oracle RDB Driver 64 Bit};SVR=myserver;DATABASE=ATTACH 'filename mydatabase';CLS=myclassname;uid=myusername;pwd=mypassword;xpt=2";
            string sql = "SELECT person_id FROM person_tab";
            DataSet ds = new DataSet();
            using (OdbcConnection conn = new OdbcConnection(connString64))
                OdbcCommand cmd = new OdbcCommand(sql, conn);
                OdbcDataAdapter da = new OdbcDataAdapter();
                da.SelectCommand = cmd;
                conn.Open();
                da.Fill(ds, "myDataSet");
            return ds;
Has anyone else encountered this problem? If so, how did you get around it?

Hello,
Since I do not have the RDB database, I made a test with both 32bit and 64bit ODBC Driver 11 for SQL Server and query for 1000 records, however, both of them can work fine.
As far as I know, the ODBC is just a component as a bridge to connect the driver and the application and since you are use the Oracle RDB driver, I suggest you posting it to the Oracle forum:
https://community.oracle.com/community/developer/english
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Full update not getting all records from PSA to ODS

Similar Messages

Maybe you are looking for