Datasource or Cube for GL wise customer wise sales report

Hi BI Masters,
I am using Bi. 7.0, there is requirement for Sales report i.e.  'GL wise customer wise Sales Report '. For this i am searching standard  datasource or cube which can help to develop the desire report. i shall appreciate all of you if you can share your experience in this type of requirement.
With Best Regards & Thanks
Kamal Purohit
INDIA

Hi,
Check the following datasource in ECC in RSA5.
0FI_GL_10                         General Ledger: Leading Ledger Balances
0FI_GL_11                         General Ledger: Balances of Leading Ledger via Line Items
0FI_GL_12                         General Ledger: Balances of Leading Ledger via Delta Queue
0FI_GL_2                          General ledger: Transaction figures - Cost of sales ledger
0FI_GL_4                          General Ledger: Line Items with Delta Extraction
0FI_GL_6                          General Ledger Sales Figures via Delta Extraction
0FI_GL_7                          General Ledger Cost of Sales Ledger via Delta Extraction
0FI_GL_8                          General Ledger: Statistical Key Figures
0FI_TX_4                          Taxes: Line Items by Means of Delta Extraction
Thanks
Reddy

Similar Messages

  • Profit and Loss Product wise, Customer wise

    Hi Gurus,
    How to generate Profit and loss Product wise and customer wise.
    Product wise - Product cost, sales and Net profit from product
    Customer wise - Product cost sold (COGS) and sales, net profit from customer.
    Please advise.

    F.01 is the T code for you .
    Provide the profit center in the dynamic selection menu for profit center .
    Cheers ,
    Dewang

  • Where do I get the vendorid for Auto-Ingest iTunes connect sales report tool?

    Hi,
    I've tried both person id and company id from my developer.apple.com profile but none of them work.
    I always get "Please enter a valid vendor number" but I see no vendor number in the whole dev profile.
    BTW, how is the tool, do you like it? Is it usable? I did not have a chance to see it in action yet...
    Please help,
    --Josef

    Hello quicker7,
    go to itunes connect site and choose the "Sales and Trends" option.
    There in the top left corner you should see name of your company prefixed by a vendorid which usually starts with number 8.
    The tool does what it says, it is just a command line which downloads the sales report to your local filesystem. It can however download only one report per run thus it is a bit clumsy to setup an automated cron job.
    I've written simple Bash script which checks local filesystem for already downloaded reports and runs the tool repeatedly for all the missing ones. You can get it from here http://ipaddevzone.com/bash-script-download-all-available-reports-using-apples-a uto-ingest-tool-itunes-connect-sales-tren
    Enjoy it,
    --JV

  • Billing Doc. Wise  & Customer Wise Report

    Hi Experts ,
    I want to view a Report which will show following Things:
    1) Cummulative Balances ( Debit /  Credit ) of all my customers in a Single Screen
    2) Bifurcation of Cummulative Total of Each Customer as per billing type Wise ( Supply/ Erection / Civil etc..)
              We have maintained Different Typs of Billing Document for each type of Billing in SAP.
    Kindly provide your helpful suggestions to guide me , else we have to develop a Z Report in order to cater this requirement.
    Thanks in Advance
    Regards
    Honey

    Hi Sachin,
    Use report S_ALR_87012172 for check the debit & credit total of customers.If need you can set your own layout in this report.
    for point no.2 pls follow the report suggested by Mukund, if you need any other help pls revert back.
    Close the thread if your issue gets resolved with the solutions
    Regards
    Sanjay

  • Customizing Oracle Sales Reports

    I am trying to customize a report in the Oracle Sales module. For instance, there is a Customer Organization Summary page that lists customers. Our employees would like a column added to that page that has a link to the Organization Notes page. How can this be done? Can the JSPs or java classes be editted? Is there a way to do this from the database side?
    When you customize a report using what provided, it lets you select some columns. One is FlexFields...but this includes a bunch of new columns. Is there a way to add a custom column?!
    Another customization is adding a new section to a summary page. Is there a way to add new sections to an existing report?
    Any assistance is greatly appreciated. If there are any Oracle consultants who work these forums, please give me some insight.
    Thank you!

    Have you looked at the ASO_PQUOTE_TEMPLATE lookup (Order Capture)?. This provides the capability to register your own template reports (.rdf). Make sure the Lookup code & Reports .rdf file name are same.
    If you need more specific customizations, Unfortunately there is no easy way to do it in 11.5.9
    I have customized some reports for Quoting, by adding custom actions to the JSP using JSP includes. As these JSPs are hardcoded, modifying is the only way to customize.
    To minimize the level of Upgrade maintenance, write the custom code in separate file and include it in main (Oracle's) jsp something like this
    <%
    if ("PRINT".euqals(qotHdrActCd))
    %>
    <%@include file="myCustomJspInclude.jsp" %>
    <%}
    else -- Other Actions.
    %>
    <%
    %>
    Hope this helps

  • Standerd BI Content DataSources and Cubes used for Cement industry

    HI,
        Kindly any one sugest the list of standerd BI Content DataSources,
       and standerd BI Content Cubes used for Cement industry
       related projects.
      Standerd BI Content Datasources and cubes for modules
      SD, Product costing , Inventry, and GL.
      Kindly Sugest.
      Regard,
      prasad.

    Hi,
    You can use normal InfoCubes/DataSource for the Cement Industry, recently I saw the design of the Cement Industry BI system, there also same InfoCubes and DataSourecs they used.
    For Cubes and DataSource details see in SDN..
    https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
    Thanks
    Reddy

  • Monthly wise sales report

    hai,
         i m working on sales report where in i need to get month wise sales of the products and the related cost incured to company by the sales in the matrix form as shown below  can u help me in which way can i get this monthly report
              march     april     may   june    july......feb
    mtrl    25            30         0       19      23   ........(mtrl quantity)
    cost   30000     15000      0      45000  ..........(amt in rs)
    where in the above i m able to get yearly sales in one column (i.e i m able to show for one particular customer total sales in one column) but i m unable to split sales monthly and unable to show in a report so how can i able to sow in this matrix form

    Dear Raj,
    Please find the code for monthly wise report in PA0001 Table for calculation of Administrator time Recording.
    http://scn.sap.com/message/14216250#14216250

  • Related Data Source for Customer Trial Balance Report

    Hi Guys,
    Can any one please let me know the related Datasource, DSO and Cube available to develop Customer Trial Balance report on BEx.
    <b>My required Row/Colum objects are</b>
    <b>KPIs    Calculated/restricted     Formula/Logic     Unit     Authorisation</b>
    Total                Calculated     Sum of all the          Quantity
    invoiced                                     invoices for a
    Quantity                          FME
    Proposed
    Base Price        Calculated     Average price            Amount
                                                    for all invoices
                                                    per FME     
    Average Eqv.
    Base Price        Calculated     Average price            Amount
                                                    for all invoices
                                                    per FME     
    Price
    Difference             Calculated     Proposed Base         Amount
                                                    Price -  Average
                                                     Eqv. Base Price          
    <b>The aggregation behavior of the individual KPI</b>
    Key Figure                                  Aggregation            Characteristic             Time
                                              (Sum, Max, Last)          
    Net Debit Amount                         Sum                           All                  All
    Net Credit Amount                         Sum                           All                  All
    Total Debit Amount                         Sum                           All                   All
    Total Credit Amount                          Sum                          All                   All
    <b>Characteristics</b>
                         Hierarchy     Display Authorisation     Selection     Status/Mapping
    Customer Number                                 Yes     KNA1-KUNNR
    Customer Name                    
    Business Area                                  Yes        PRCTR
    Special GL Indicator                                  Yes                        Company Code                                   Yes      BKPF-BUKRS
    Industry Code                                     KNA1-BRAN1
    This is how my Functional Spec is..
    Please let me know ASAP.
    Thanks
    Murali

    hi,
    You can use this report.
    RFSLD00 Trial balance
    For Further Reference use the link.
    http://www.abapcode.info/2007/06/standard-sap-reports.html
    Regards
    Sumit AGarwal

  • Best Practice Table Creation for Multiple Customers, Weekly/Monthly Sales Data in Multiple Fields

    We have an homegrown Access database originally designed in 2000 that now has an SQL back-end.  The database has not yet been converted to a higher format such as Access 2007 since at least 2 users are still on Access 2003.  It is fine if suggestions
    will only work with Access 2007 or higher.
    I'm trying to determine if our database is the best place to do this or if we should look at another solution.  We have thousands of products each with a single identifier.  There are customers who provide us regular sales reporting for what was
    sold in a given time period -- weekly, monthly, quarterly, yearly time periods being most important.  This reporting may or may not include all of our product identifiers.  The reporting is typically based on calendar-defined timing although we have
    some customers who have their own calendars which may not align to a calendar month or calendar year so recording the time period can be helpful.
    Each customer's sales report can contain anything from 1,000-20,000 rows of products for each report.  Each customer report is different and they typically have between 4-30 columns of data for each product; headers are consistently named.  The
    product identifiers included may vary by customer and even within each report for a customer; the data in the product identifier row changes each week.  Headers include a wide variety of data such as overall on hand, overall on order, unsellable on hand,
    returns, on hand information for each location or customer grouping, sell-through units information for each location or customer grouping for that given time period, sell-through dollars information for each location or customer grouping for that given time
    period,  sell-through units information for each location or customer grouping for a cumulative time period (same thing for dollars), warehouse on hands, warehouse on orders, the customer's unique categorization of our product in their system, the customer's
    current status code for that product, and so on.
    Currently all of this data is stored in a multitude of Excel spreadsheets (by customer, division and time period).  Due to overall volume of information and number of Excel sheets, cross-referencing can take considerable time.  Is it possible to
    set-up tables for our largest customers so I can create queries and pivot tables to more quickly look at sales-related information by category, by specific product(s), by partner, by specific products or categories across partners, by specific products or
    categories across specific weeks/months/years, etc.  We do have a separate product table so only the product identifier or a junction table may be needed to pull in additional information from the product table with queries.  We do need to maintain
    the sales reporting information indefinitely.
    I welcome any suggestions, best practice or resources (books, web, etc).
    Many thanks!

    Currently all of this data is stored in a multitude of Excel spreadsheets (by customer, division and time period).  Due to overall volume of information and number of Excel sheets, cross-referencing can take considerable time.  Is it possible to
    set-up tables .....
    I assume you want to migrate to SQL Server.
    Your best course of action is to hire a professional database designer for a short period like a month.
    Once you have the database, you need to hire a professional DBA to move your current data from Access & Excel into the new SQL Server database.
    Finally you have to hire an SSRS professional to design reports for your company.
    It is also beneficial if the above professionals train your staff while building the new RDBMS.
    Certain senior SQL Server professionals may be able to do all 3 functions in one person: db design, database administration/ETL & business intelligence development (reports).
    Kalman Toth Database & OLAP Architect
    SELECT Video Tutorials 4 Hours
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Report for Customer wise Payment

    Hi All,
    I want a report for Customer who has been maintained on Cash Basis ( One Time Customer). The customer are sold on cash so there is only one entry passed inm FI that is
    Bank A/c Dr
    To Sales A/C Cr
    That means we donot have record customer wise in SAP. But since billing document is created for these customers too, we might be having some report.
    I want if there is any report in SD or FI which can give e cutomer wise payment details
    Thanks in Advance. I am quite liberal in assigning points.
    Rg
    VK

    Hi,
    You can write a custom report to pull the data , say from BSID, BSEC with documnetnumber as key field.
    Hope this helps.
    Thanks,
    Vamsi

  • Bapi for customer wise material stock on date

    hi all,
    is there any bapi to find customer wise material stock as on date.as logic as MB5B

    Hi Kumar,
    MB5B is a report RM07MLBD  u can copy it to Z, do the logic as you required.. instead of searching for new.. & buliding the logic from the scratch..  so that u will get all the Functionality of MB5B
    Regards

  • Customer wise Total order qnty,dispatched qnty & qnty for despatch

    Hi all,
    How to check customer wise,for individual material, Total sales order quatity,dispatched qnty & qnty available for dispatch in a single report,
    As tryed in MB52, it will show against S.O wise qnty availble for disptach, & VA05 will show order qnty with partial delivery(but not qnty).
    Can we get the above in single report?

    Hello Pawar,
    There is no standard reports available as far as i know to check customer wise,for individual material, Total sales order quatity,dispatched qnty & qnty available for dispatch in a single report.
    But in the T-code "MC18", you can do the confirugation for the field catalog.
    Steps for setting up a Field Catalog -
    1. Specify a name and a description for the field catalog you want to create in the field Field catalog.
    2. Assign the field catalog to an application.
    3. Define the catalog category.
    4. Press ENTER.
    You branch to the maintenance screen of the individual fields of the catalogs.
    5. Depending on the catalog category you have chosen, select Edit -> Characteristics or Key figures or Date.
    Two dialog boxes are displayed for selecting the fields.One dialog box lists the fields you have already selected. Choose Selection list to select further fields.If you have not yet selected any fields, the second dialog box is displayed at the same time.The second dialog box consists of two lists. The list on the right contains all source tables from which you can select fields for the field catalogs. In this case, only the source tables valid for the selected application are displayed.
    6. If you want to display the fields of a certain source table, you can select this by double-clicking on it.
    The list on the left shows the fields of the selected source table.
    7. If you want to copy a field from the list into your field catalog, position the cursor on the corresponding field name and choose Copy.
    The selected field is marked and copied into the list of the already selected fields.
    Note
    When you select the source tables and fields, the respective descriptions are displayed.
    You can use the Switch display function to display the technical names (table and field names from the Data Dictionary).
    8. Press Copy + close to branch to the list of the selected fields.
    You can now also edit this list, i.e. you can change the sequence in which the fields appear, delete fields from the list or add new fields from the source tables.
    9. The sequence of the selected characteristics can be changed as follows:
    a) Select the characteristic, or a block of characteristics that is to be moved. The selection can be made using the icon Select/Deselect or Select block, or with a double click. The icon move is displayed.
    b) Position your cursor on a different characteristic and choose the icon Move.
    The characteristic or block of characteristics you initially selected will now be inserted above the second selected characteristic.
    10. To copy the selected fields to your field catalog, choose Copy.
    11. Save the field catalog.
    12.Then Define the updated rules.
    Regards,
    SARTHAK.

  • Databasetable for customer wise materials info record

    Hi,
      i am preparing customer wise stock report functional spec.
    in this report system has to search customer wise models available in plant and stock of each model .
    pls guide from which database table system has to pick the model nos. for this report.
    thanks & regards
    vr

    u can cross checl with tables KN**
    regards
    Prabhu

  • Stock reservation report For customer wise and Document wise

    Dear sd experts ...
    In my company  we have kept some reserved stock to some customers By using MB1B-412E M.type now Requirement is I want to see how much stock kept in reservation for Customers and Document wise also
    I Have checked in CO09 But not possible and MCTA also
    plz guide me how to find

    did you try MMBE ?
    also check MB5B, MD04, MB5T

  • Fbl1n and fbl5n display at time line item wise name for vendor and customer

    Hi
    Could you tell me how can I include Customer or Vendor names for each line items in transaction FBL5N and FBL1N, please? Customer Accounts are displayed well, but in several cases we also need the name of the certain Customer or Vendor account names. This would be important for consolidation of customer accounts of the same customers.
    It is possible to include in these reports the u201EName1u201D, but they are empty in all cases. Could you tell me how it is possible to correct this problem, please?
    ysr

    hi YSR,
    See if you want to have the Vendor/ Customer name or number to be displayed when you execute it. I mean on the Vendor/Customer Line Item Display.
    THEN follow the below steps........
    After executing the FBL1N or FBL5N Click CTRL+F8 or Change Layout.  From the Pop screen select the Vendor from the Right side of the screen and then drag to the Left side of the screen, then click on Copy as.
    Then Save the Layout or CTRL F12, save the layout with the new name that you want.
    When you want this Layout as the default each and every time then u have to do 1 more step....
    After executing the same layout go the
    MENU> Settings>Layout-->Administration...
    there you select the layout that u have created and then set that layout as the Default settings Check mark on DS.
    So that each and every time when u execute it the same layout will be displayed with the fields that u have selected....
    Hope this will solve ur issue......
    Kumar........

Maybe you are looking for