Date Condition based on time

Hi :
I am working on Plant Maintenance module, i extracted work orders ( aufnr ) from AUFK based on some conditions.
In the selection screen i have s_date option where the user can give any date range .my question is ...after selecting all the work orders, i want to count work orders whose status is conformed and date condition is " For the calender week X, work order actual end date ( getri ) should not be later than the week ending of sunday night 11:59pm " .
Here calender week X, starts on monday morning 00:01 am and ends sunday night 11:59pm
I am able to extract work orders whose status is conformed , but i need logic for tha date condition based on the time ie, end date should not be later than the week ending of sunday night 11:59pm.
points will be rewarded ..
Thx.
Raghu

if you want the current date and time you can check with sy-datum or sy-uzeit.
Or you can find if there is any date and time fields in the table and compare them against the date you want to.
I am not sure if youa re looking for this.

Similar Messages

How to find out the top 10 data loads based on time duration?.

Hi,
We are working on performance tuning. so we want to find out the top 10 loads which had run long time in date wise.
We need the load start time and end time of the load process, Infosource and datatarget name.
There are nearly 1000 loads, So it is very difficult to collect the load's timings in RSMO.
Is there any another alternative to collect the top 10 loads based on time duration in date wise?
Thanks & Regards,
Raju

Hi Gangaraju,
You can install BI Statistics for getting these type of data.
Or you check in RSDDSTAT or RSMDATASTATE_EXT or table for the Load process time.
Or goto t-code ST13 to get detailed analysis of a Process chain for a given period.
Hope this helps.
Regards,
Ravi Kanth

Date change based on time of day...

Hello All,
I am new to Java and creating stamps in Adobe. I have been requested to create a stamp that puts the date based on the current date and time. Anything that is stamped after 3:00pm needs to show the bussiness day. Based on the dynamic stamps default in acrobat I am able to create the a stamp with the current date but can not figure out how to create the IF/Then statment to test for the current time and adjust the to the new date if needed. Please help!
Current Sript:
event.value = (new Date()).toString();
AFDate_FormatEx("mmm dd, yyyy");
event.value = "Date " + event.value;
Thanks!
William

I've done exactly this for a client of mine last year, although it was not on BC (but it wont matter). It was for a childrens character series, we had 4 times of the day and even seasons where the website would change colors, get lighter and darker (sun cycle) and play different sounds (frogs at night, birds during the day).
Just have 2-3 different CSS files and load each one according to the time of day or handle everything in Javascript.
PM me and I can give you the URL of the site I am talking about.

Create condition based on date and time

Hi everyone,
I'm using Discoverer Plus 10g. I want to create a condition in my worksheet using StageTime (consists of date and time) as the parameter, i.e. StageTime > StartTimeParameter and StageTime < EndTimeParameter.
I am able to create condition based on the date, but unable to create based on the time. I need to limit the data up to the hour, e.g.
StageTime > 11-NOV-2005 1 AM and StageTime < 11-NOV-2005 3 AM.
But so far I am unable to create a condition for the hour element.
I try to use this:
TO_DATE(TO_CHAR(:Start Date Parameter,'mm-dd-yyyy')||' '||:Start Hour||':00:00','mm-dd-yyyy hh24:mi:ss')
Start Date Parameter is selected using the date picker in Discoverer Plus
and the Start Hour is in the format '00' to '23'
but was prompted with the error: ORA-015858 a non numeric character was found where a numeric was expected.
Would really appreciate anyone's help on this! :)
Thanks,
Angeline :)

how about, if :Start Date Parameter is of type DATE and :Start Hour is of type varchar2(2) to simply do
:Start Date Parameter + to_number(:Start Hour)/24
?

Select Query Based on date condition

Hi ,
Is it Possible.
i want to run select query based on date condition.
Eg...
if the date between 01-jan-01 and 01-jan-05 then
select * from table1;
if the date between 02-jan-05 and 01-jan-08 then
select * from table2;
Becaz i have data in 2 diffrent tables , based on the date condition i wnt to run the select statement to diffrent tables.
i dont want plsql here Just SQL needed.
thanks,
-R
Edited by: infant_raj on May 5, 2009 11:48 PM

Helo Kanish,
this is not the one i was asking..
wht i mean was .
i use bind variable to get date while running the select statement , once i get the date then i want to choose any one of the table to run select query.
EG..
select col1,col2 from table1 where date between only if 01-jan-01 and 01-jan-05;
select col1,col2 from table2 where date between only if 02-jan-05 and 01-jan-08;
Run any one of the two . not all
thanks,
_raj

Oracle Business Intelligence How to choose data set based on a condition

Hi,
I am using Oracle Business Intelligence for creating reports, i am facing a situation where i have two quries (data sets in BI), one to display a Failure message and other to fetch data from the table to be displayed in the report.
The problem is i am unable to choose which data set to run based on a condition. How to use a condition based on which the dataset will be run
For example : i will read a table column value if it is 'S' means success, then i have to run the dataset to fetch the data from the table.
If the column value has 'F' then i have to run the dataset which will display failure message
Please let me know if any of you have any idea on this
Thanks in advance
Muthukumaran

Hi Chinna,
You have to use some scripting as well as coding to perform the tasks listed by you. First of all make your form Dynamic, In your Adobe lifecycle Designer, open your form,
Goto, File --> Form Properties,
Goto the Defaults tab,
Select "Dynamic PDF" for the XDP Preview Format:
Click OK.
This setting will now allow dynamicity in your Form, when you view it in PDF Preview tab.
For Hiding/Unhiding the fields/SF, you can use the presence property and set it based on the conditions. like:
if (this.rawValue == null)
TextField1.presence = "hidden";
For your second task, you may map a method corresponding to onSubmit event of the IF and write the code to create the workflow and make RFC call here.
For third one, you need to convert the PDFObject from Binary context into a byte array and save it at appropriate location.
Hope I have answered all your queries.
Cheers,
Arafat

Error when giving untill condition for System time and date

Hi Experts,
i am using Untill Loop in my workflow to set condition for System time and date.According to this condition when system date and time is greater than equal to some date and time then mail goes to an agent.But during testing , the workflow gets into error stage.
             In workflow log i am getting error like
'Maximum number of    10000 nodes reached' in executed action 'DEQUEUE_NEXT_NODE' for false condition.
                    Please suggest what may be possible cause or solution for it?
           Points will be rewarded for any good solution.
Thanks
Snehasish Das

Hi,
You should not use loop for that kind of purpose. It sounds to me that your workflow is looping all the time, and the maximum numer of nodes is reached soon, and the workflow goes into error.
You should use the WF deadline functionality for your purpose. For example use in a relevant step the "latest end" tab, and define the deadline there. Then when your deadline is reached, the workflow will continue in a separate outcome, and there you can send your mail.
Regards,
Karri

How to cummulate the quantity based on the date condition?

hi,
     In my query,i need to cummulate the open quantity based on the two date condition.
If my Schedule line date > system date, i need to cummulate the open quantity.
      But in my query level i am getting 0 or 1 based on the above condition.
      i am struggling to cummulate the open qty based on the above condition.
    can any body throws an idea to resolve my issue.
Regards,
ravi.

Thanks for suggestion,Almost i narrow down my issue to get the proper result.
But i have one doubt.
Is it possible to user Formula variable (Processing by replacement path-Reference char as Scheduline date) in my Calculated Key Fig calculation.?? But here i am created Scheduline date as Characher infoobject.
Actually i am created Scheduline date as Character InfoObject,If i am using the following condition like
(Schedule line date > system date) its throwing "X" value.
For the above issue,if i am changing the Scheduline date as Key figure InfoObject means i will get the proper output for the condition(Schedule line date > system date) either 0 or 1.
Is it correct????
Regards,
Ravi.

How to create a condition based on a select that retrieve dynamically a LOV

Hi all, I need to create a condition based on a select that retrieve dynamically a LOV.
So, the condition have to be:
inventory_item_id NOT IN (SELECT inventory_item_id FROM apps.mtl_system_items_kfv WHERE concatenated_segments = 'GENERAL_FAULTS_IPTV')
I need to create a LOV based on this select without making any join with the folder which contains the field inventory_item_id, because otherwise I have the contradiction:
and o124757.INVENTORY_ITEM_ID = o118741.INVENTORY_ITEM_ID -- join between the main custom folder (o118741) and the LOV custom folder (o124757)
and o118741.INVENTORY_ITEM_ID NOT IN (o124757.INVENTORY_ITEM_ID) -- condition
These two condition together don't show any data, obviously....This means also, that I can't use a calculated field, because if I want to see this field, I have to create a join, another time, with the main custom folder.
I tried to create a LOV on the Administrator, but when I create the condition I have to check manually the values....and if in the future this LOV will increase I need every time to re-check all the values.....instead I need that the inventory_item_id have to be NOT IN dinamically in the list of values retrieved by the select.
Anybody has inplemented something similar ??
Thanks in advance
Alex

Hi alex,
SELECT incidents.INVENTORY_ITEM_ID,
pcodes.PROBLEM_NAME
FROM apps.cs_incidents_all_b incidents,apps.jtf_rs_problem_codes_v pcodes
WHERE incidents.category_id IN (SELECT category_id
FROM mtl_categories_kfv
WHERE concatenated_segments = 'IPTV')
AND incidents.PROBLEM_CODE = pcodes.PROBLEM_CODE
where incidents.INVENTORY_ITEM_ID NOT IN SELECT inventory_item_id
FROM apps.mtl_system_items_kfv
WHERE concatenated_segments = 'GENERAL_FAULTS_IPTV'
You want to add this condition to the first query it holds good for this scenerio.All the items which are NOT IN will be retrieved.Here you are selecting other than "General_faults_iptv"
But again your trying to select in the second query where you want "General_faults_iptv"
SELECT inventory_item_id
FROM apps.mtl_system_items_kfv
WHERE concatenated_segments = 'GENERAL_FAULTS_IPTV'
If you carefully go through what your doing,you will understand.In the above explantion ,there will be no records generated.First query your saying NOT IN and again your saying for the same IN,how will records retrieve its meaningless.
I dont know what you want to get from second query.I would suggest you to do is dont use the second query and just use the first query and you will get.Here is the query and this will give you result.
SELECT incidents.INVENTORY_ITEM_ID,
pcodes.PROBLEM_NAME
FROM apps.cs_incidents_all_b incidents,apps.jtf_rs_problem_codes_v pcodes
WHERE incidents.category_id IN (SELECT category_id
FROM mtl_categories_kfv
WHERE concatenated_segments = 'IPTV')
AND incidents.PROBLEM_CODE = pcodes.PROBLEM_CODE
AND incidents.INVENTORY_ITEM_ID NOT IN SELECT inventory_item_id
FROM apps.mtl_system_items_kfv
WHERE concatenated_segments = 'GENERAL_FAULTS_IPTV'
Regards,
Kranthi.

How to make repricing for specific conditions at the time of billing?

Hello
I'm SD Pricing person. Let me ask here experts below my concern.
In EU countries, there is recycling fee in sales of electronics or Note PC with batteries....to keep our earth clean.
So when customers buy such products, they have to pay more as recycling fee including invoice amount.
My question is... we want to make repricing for recycling conditions when the billing is created.
Based on our configuration, recycling condition is not defined as a kind of tax condition.
So this value is just copied from sales order.
(pricing type in copy control is 'G' which means repricing for tax condition.)
In this situation, we want to make repricing for those conditions during operating system.
Is there any easy way to cover this?
As I think, this is not easy because the system is already operated.
To change condition attribution is really risky. If we dare do, we have to migrate all open orders.
So I want to put this way to the end of my choice.
For this requirement,
1. We have to change condition class or category or calculation type in order to be repriced based on pricing type 'G'.
(ex. Set the condition category as 'I' inter-billing or 'L' always repricing.)
But transaction data are created now and all open orders will be affected.
2. To create new conditions are not easy because these conditions are mapped to the CO-PA value field and the values are posted in FI doc.
3. To change pricing type in copy control is almost impossible because of the impact.
What can I do this in this situation?
What I want to do is just to make repricing for specific conditions at the time of billing in case that pricing type of copy control is 'G'.
Thank you in advance.

Let me ask agagin to all experts.
I want to make A condition to be repriced at the time of billing.
For this, I have to set condition category as 'L' (Generally new when copying).
But I do not want to do in that way becauuse I am maintaining big operated system now.
In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
That is why I am asking.
Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
At last, what I want is not to be shown this condition only in billing doc.
'A' condition should be displayed in both Sales order and Billing doc.
And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
Thank you in advance.

Automatic lot creation based on time Frequency

Hi,
For 01 inspection incoming inspection ,
F or certified vendors, without inspection , material is getting posted to UUS without lot creation. ( QI info record settings).
but for this case , business requirement is to get automatic lot creation based on time like 6 months once .
Automatic lot to be created for this certified vendor on time frequency basis. how to trigger this Lot creation based on time.
Help.
VV.

Hi,
In std SAP we dont have option of generating Automatic lot creation based on periodic basis. But we can provide some workaround soultion.
Option 1:
USe Source Insepction concept. Here Inspection lot will be created for every P.O. Here u can relase P.O line items in QI07 which can sceduled in Job planning on periodic basis. Use Skip inspection lot concept to skip unwanted lots. This has direct relation with Q-Info record.
Option 2:
U can generate automatic lot creation based on Stability study concept. Here are the following steps
Initiate Stablility study
Create Initial sample
Perform intial test
Confirm initail sample
stability planning
Define storage condition
create testing schedule
store stability sample
define cycle start
schedule
complete stability study.
Option 3:
To get Automatic lot creation u can use BAPI QPL1_INSPECTION_LOT_CREATE . When a due date come for inspection,it created a lot of 01 / Z-01 inspection type automatically through QA01( call the program ,enter the inspection lot origin & material,vendor & save). Create Z-T code which has vendor material plant combination.
Execute the above T-code based on Periodic basis.
Explore above 3 options and choose best one according to ur requirements.
Edited by: Lokesh K on Oct 12, 2010 11:27 AM

Update Date types based on actions

Hi Gurus,
I have a requirement to update date types within a date profile based on a certain action condition.
I have 3 date types:
Downtime Start
Downtime End
Total Downtime Duration
The priorities in my transaction have, x, y, z for example and x is default.
Upon selecting y, the system should take into consideration the timestamp of this change and update the Downtime Start... The moment the priority is changed to anything other than "y", it should take this timestamp and update "downtime end".
The difference between these two times would be the third date type.
Any ideas how to proceed?
Regards,
Ash

Hi
Please post DDL+DML next time :-)
-- This is the DDL! create the database structure
create table DateRange(
StartDate DATE,
FinishDate DATE,
Condition BIT
GO
create table Calendar(
CalendarDate DATE,
IsParental BIT
GO
-- This is the DML (insert some sample data)
insert DateRange
values
('2014-01-02', '2014-01-03', 1),
('2014-01-03', '2014-01-13', 0),
('2014-01-13', '2014-01-14', 1)
GO
insert Calendar(CalendarDate)
values
('2014-01-01'),
('2014-01-02'),
('2014-01-03'),
('2014-01-04'),
('2014-01-05'),
('2014-01-06'),
('2014-01-07'),
('2014-01-08'),
('2014-01-09'),
('2014-01-10')
select * from DateRange
select * from Calendar
GO
-- This is the solution
select CalendarDate
from Calendar C
where EXISTS (
select C.CalendarDate
FROM DateRange D
where C.CalendarDate between D.StartDate and D.FinishDate and D.Condition = 1
UPDATE Calendar
SET IsParental = 1
from Calendar C
where EXISTS (
select C.CalendarDate
FROM DateRange D
where C.CalendarDate between D.StartDate and D.FinishDate and D.Condition = 1
[Personal Site] [Blog] [Facebook]

Unable to fetch data for the second time in an ADOBE form

Hi All,
I am creating a PDF form and its data is based on the output parameter of an interface, when i drag and drop an object from the data view into the body page twice, only the first time the value is getting printed and from the second time it is not printing any data.
Kindly let me know if any one have solution for the same or if i am not clear any where.
Thanks in advance.
Warm Regards,
Kasi Raaman.R

The pbm is now solved

Date condition not working correctly in Desktop

Hello,
I have two custom folders in Admin that are joined. One of the folders contains the following query:
SELECT ORGANIZATION_ID, ASSET_NUMBER, MIN(CURRENT_READING_DATE) FIRST_READ_DATE, MIN(CURRENT_READING) FIRST_READING
FROM EAM_METER_READINGS_V
WHERE PREV_DESC IS NULL
Group By ORGANIZATION_ID, ASSET_NUMBER
I want my workbook to report the earliest meter reading that exists, based on the date that is specified in the parameters in Desktop. When I create a parameter for the date, the workbook reports the earliest reading in the database; it ignores the date restriction entered in the parameter. This is the parameter:
First Read Date MIN BETWEEN :First Reading Date and SYSDATE
If I include the date condition in the SQL of the custom folder the workbook functions exactly as it should. The date condition is in the SQL as the following:
and current_reading_date between '01-JAN-2007' and SYSDATE
Since the workbook functions correctly when the condition is coded in the SQL but not when it is based on a parameter, I assume the problem is with the parameter. Any ideas on how I may correct this?
Thanks,
Steve

Thanks for the response Michael. I tried using the MIN function as you suggested, but I still am not getting the expected result. I’m not sure that I was clear in my initial problem description. I will try to provide more detail with this post.
The reason I have two custom folders is that my original query has a nested Select statement (EAMV) and I couldn’t find a way to pass the parameter from EAMV to Discoverer. Following is the original query. I suppose the first logical questions would be, is there a way to pass the parameter to Discoverer? Would this alleviate the need for the second custom folder?
SELECT K.ORGANIZATION_CODE "ORG" -- ORGANIZATION
, K.ORGANIZATION_ID
,A.NAME "PM SCHEDULE NAME" -- PREVENTIVE MAINTENANCE SCHEDULE NAME
--( (B.RUNTIME_INTERVAL/F.USER_DEFINED_RATE) + D.LAST_SERVICE_END_DATE) "PROJECTED READ DATE" -- USES USER_DEFINED_RATE FROM METER DEFINITION
,(C.LAST_SERVICE_READING + B.RUNTIME_INTERVAL) "PROJECTED READ UNITS" -- NEXT SERVICE READING DUE UNITS
,F.METER_UOM "UOM" -- UNIT OF MEASURE ON METER
,F.METER_NAME "METER NAME" -- METER NAME
,G.SERIAL_NUMBER "MAINT EQ NO" -- MAINTAINED EQUIPMENT NUMBER
,H.C_ATTRIBUTE1 "MAKE" -- MAINTAINED EQUIPMENT NUMBER - MAKE/MANUFACTURER
,H.C_ATTRIBUTE2 "MODEL" -- MAINTAINED EQUIPMENT NUMBER - MODEL
,H.C_ATTRIBUTE4 "SERIAL NO" -- MAINTAINED EQUIPMENT NUMBER - SERIAL NUMBER
,I.SEGMENT1 "ACTIVITY" -- ASSET ACTIVITY
,D.LAST_SERVICE_END_DATE "LAST READ DATE" -- DATE OF LAST PM SERVICE READING
,C.LAST_SERVICE_READING "LAST READ UNITS" -- UNITS OF LAST PM SERVICE READING
,E1.CURRENT_READING_DATE "CURRENT READ DATE" -- DATE OF CURRENT SERVICE READING (FROM METER FORM)
,E1.CURRENT_READING                                   "CURRENT READ UNITS" -- UNITS OF CURRENT SERVICE READING (FROM METER FORM)
,E1.LIFE_TO_DATE_READING "LIFE TO DATE READING" LIFE TO DATE READING
--,(E1.CURRENT_READING - C.LAST_SERVICE_READING) "CURRENT/LAST VARIANCE" -- UNITS SINCE LAST PM SERVICE READING
,( (C.LAST_SERVICE_READING + B.RUNTIME_INTERVAL) - E1.CURRENT_READING ) "PROJECTED/CURR VARIANCE" -- UNITS REMAINING UNTIL NEXT SCHEDULED READING
,J.DESCRIPTION "LOCATION" -- OWNING DEPARTMENT DESCRIPTION OF ASSET NUMBER
,J.DEPARTMENT_CODE
,E1.DISABLE_FLAG
,G.CURRENT_STATUS
,B.RUNTIME_INTERVAL
,Y.SET_NAME
,EAMV.FIRST_READ_DATE READ_DATE
,EAMV.FIRST_READING READING
FROM EAM.EAM_PM_SCHEDULINGS A
,EAM.EAM_PM_SCHEDULING_RULES B
,EAM.EAM_PM_LAST_SERVICE C
,INV.MTL_EAM_ASSET_ACTIVITIES D
,EAM.EAM_ASSET_METERS E
,EAM.EAM_METER_READINGS E1
,EAM.EAM_METERS F
,INV.MTL_SERIAL_NUMBERS G
,INV.MTL_EAM_ASSET_ATTR_VALUES H
,INV.MTL_SYSTEM_ITEMS_B I
,BOM.BOM_DEPARTMENTS J
,INV.MTL_PARAMETERS K
,EAM.EAM_PM_SET_NAMES Y
     ,(SELECT ORGANIZATION_ID, ASSET_NUMBER, MIN(CURRENT_READING_DATE) FIRST_READ_DATE, MIN(LIFE_TO_DATE_READING) FIRST_READING
          FROM EAM_METER_READINGS_V
          WHERE CURRENT_READING_DATE BETWEEN '01-JAN-2007' AND '30-JUN-2007'
          GROUP BY ORGANIZATION_ID, ASSET_NUMBER) EAMV
WHERE A.PM_SCHEDULE_ID = B.PM_SCHEDULE_ID
AND A.ACTIVITY_ASSOCIATION_ID = C.ACTIVITY_ASSOCIATION_ID
AND C.ACTIVITY_ASSOCIATION_ID = D.ACTIVITY_ASSOCIATION_ID
AND D.SERIAL_NUMBER = E.ASSET_NUMBER
AND D.ORGANIZATION_ID = E.ORGANIZATION_ID
AND E.METER_ID = E1.METER_ID
AND E1.METER_READING_ID =
(SELECT MAX(METER_READING_ID)
FROM EAM_METER_READINGS
WHERE METER_ID = E1.METER_ID
AND (DISABLE_FLAG = 'N' OR DISABLE_FLAG IS NULL))
AND E.METER_ID = C.METER_ID
AND E.METER_ID = B.METER_ID
AND E.METER_ID = F.METER_ID
AND D.MAINTENANCE_OBJECT_ID = G.GEN_OBJECT_ID
AND D.ORGANIZATION_ID = G.CURRENT_ORGANIZATION_ID
AND G.SERIAL_NUMBER = H.SERIAL_NUMBER
AND G.CURRENT_ORGANIZATION_ID = H.ORGANIZATION_ID
AND D.INVENTORY_ITEM_ID = H.INVENTORY_ITEM_ID
AND H.ATTRIBUTE_CATEGORY = 'EQUIPMENT DETAILS'
AND D.ASSET_ACTIVITY_ID = I.INVENTORY_ITEM_ID
AND D.ORGANIZATION_ID = I.ORGANIZATION_ID
AND G.OWNING_DEPARTMENT_ID = J.DEPARTMENT_ID (+)
AND I.ORGANIZATION_ID = K.ORGANIZATION_ID
AND A.SET_NAME_ID = Y.SET_NAME_ID
AND Y.SET_NAME IN ('MAIN','COMP')
AND G.CURRENT_ORGANIZATION_ID = EAMV.ORGANIZATION_ID
AND G.SERIAL_NUMBER = EAMV.ASSET_NUMBER
AND K.ORGANIZATION_CODE = 'MCC'
Using this query I want to show the most recent reading (current reading) and then give users the flexibility to enter an earlier date so the earliest reading as of that date will also show. For example, if they enter 1-JAN-2007 as the parameter and there was a reading taken on 2-JAN-07 and 28-JAN-07, the report should show the 2-JAN-2007 reading (in addition to the most recent reading in a separate column). Currently, everything on the report displays correctly, except for the reading based on the parameter.

Can Data Links be established between Data sets based on View Objects?

Hi all,
In the BI Publisher Documentation it's given that Datasets based on view object queries do not support Data Links / Group Links. We found out that only way to establish relationship between view object Datasets is to create a view link and then upload it to create a Dataset.
1. Is there any other way to establish relationship between view objects Datasets in DataModel editor itself just as in the case of data sets based on (SQL queries e.t.c.)?
2. If so can View object Datasets be linked to Datasets based on other Datasources?
3. Will the Datalinks for View object Datasets be supported in any of the upcoming releases. Is there any ER logged for this case?
Any insight on the above issues will be really helpful.
Thanks

Enhance the data source with date and time and populate these fields in the user exit using the function module IB_CONVERT_FROM_TIMESTAMP .
OR
You can create Z function module IB_CONVERT_FROM_TIMESTAMP in BW side and write a routine in update rules/transfer rules to populate date and time.
hope this helps ...
Ravi

Date Condition based on time

Similar Messages

Maybe you are looking for