Date data encoded in the .Iso file?
My HDD died I managed to recover my Logic 8 .iso files,but now they don't have names. Opening the .Iso with Text Editor reveals the original audio folder name, from which I was able to determine the project name. However, I can't tell which is the latest version. Is there a way to find this, creation date, or which were backups, from the .iso data?
Thanks for any help
Tom
Since you've had no takers, I think most long term computer users have probably tried something like this at some time or another with very few positive results - as far as Logic goes, I'd guess that the information that you want is in there somewhere, but you don't know which file its in and you don't know which files belong together?
When you say .iso (disk image), I presume its a typo - .lso is presumably what you mean - obviously, each constituent file used in a Project contains a record of the last date it was changed (if the time displayed on your computer is correct) as a normal OS function - the trouble is that when files are deleted they may still stay on your hard drive (until they're overwritten), but the Directory entry (name and location of first file to load) has been deleted - the references to the associated files are usually contained in another file of its own like a FAT (File Allocation Table) file on PCs which may or may not be recoverable. Its a bit of a tall order, anyway - best left to someone that knows a lot more than I do, if it were me.. he he...
Well, my rambling might induce a response from someone, you never know..
Similar Messages
-
I tried to change the metadata date. It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
Unable to change original file. Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
Wassup?What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
Regards
Léonie -
I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.Can you post an ipconfig /all from the server and the DC?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
Hi,
In one of my dll (VS2010), the process Skipping target "MetaGen" because all output files are up-to-date with respect to the input files.
it is at random. I have checked the time stamps of the dll and metagen.write.1.tlog both having the time stamp on the failed build. But all files in release folder did not have the same time. They are one hour earlier than the dll
and the metagen.write.1.tlog.
On the good build it said the input file is is newer than output file ".\Release\\metagen.write.1.tlog" and allfiles in the release folder have same time stamp.
Any clue to solve this ?
Regards,Hi,
Based on your post, I am not very clear about your issue. I feel your issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Could you please provide us more information so that we resolve your issue better?
What type of project are you working with? C++ MFC project?
How was the
metagen.write.1.tlog file generated in your project?
What error messages did you get?
What is the 'input file'?
If possible, please provide us a sample project to reproduce your issue.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to change the default save encoding of the dvm files when create dvm???
When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there. -
How do I find the .iso file from my windows 7 install disk?
I am trying to install windows 7 on my new macbook air. I have a copy of windows7 install disk but as there is no cd drive I am having difficulty. I cannot figure out how to find the .iso file to put on a usb in order to install it.
Can anyone help please?Welcome to the Apple Support Communities
You can only get Windows 7 on a ISO file if you purchased Windows 7 from the Microsoft Store as a download, so this option isn't available for you.
In your case, I recommend you to get an external optical drive (any external optical drive will work) and install Windows from the DVD. Doing this, you will save headaches -
where do i find the ISO file needed to install windows 7 home via bootcamp??
try asking in the Boot Camp forum: https://discussions.apple.com/community/windows_software/boot_camp. Good luck.
-
Where is the .iso file for Windows 8?
I bought the ugprade for windows 8, and ran "Windows8-UpgradeAssistant"
It scanned my computer, all was good to go. I finished downloading something... (I assumed it was windows8)
But once I finished everything, it gave me a shortcut on my desktop called "Install Windows"
When I run that shortcut, it gives me 2 options:
-Install now
-Install later from your desktop
This is what I see everytime I run that shortcut file.
Where can I find my .iso file??
(Note, my current computer is not the computer I want to install Win8. I'm upgrading now so that I can get the ISO file and save it for later use when I get my new computer)"Important: This tool provides valuable information about your computer's compatibility with Windows 8, facilitates the purchase of the Windows 8 download, and then downloads the correct
version (32-bit or 64-bit) based on information about
your computer - all important reasons to run this tool from the PC you're going to clean install Windows 8 on."
... I didn't know this, and I bought windows 8 on my current PC which is 5 years old.
I'm planning to get a new computer next month which will be 64-bit. Is there a way to re-download or am I out of luck?
On the Install Windows 8 screen, choose Install by creating media and
then click Next.
This step never showed up for me. -
Publish to DVD says it completes, does not write the ISO file in version 13.
When I publish to DVD and select ISO it says it completes but it does not write the ISO file in version 13.
apsteinmetz
The DVD disc which is labelled 4.7 GB/120 minutes is in reality 4.38 GB. And the DVD disc which is labelled 8.5 GB/240 minutes is in reality 7.95 GB.
What version of Premiere Elements and on what computer operating system is it running? Can we assume 13/13.1 on Windows 8.1 64 bit?
What are you doing, a burn to disc DVD-VIDEO standard or widescreen on DVD disc or burn to disc AVCHD on DVD disc?
When you get to the burn dialog (and you have your disc in the burner tray), what does the Quality area of the burn dialog show for Space Required and Bitrate with and without a check mark next to "Fit Contents to Available Space"?
Or, can you do burn to Folder (4.7 GB) and/or burn to ISO Image (4.7 GB)? Are your successful burn to .iso files under 1 GB in file size?
Please quantitate "...shortening the timeline dramatically".
Thank you. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
Cdrecord/brasero burn the ISO file as data file instead of as image
Following the wiki, I was able to burn a Cd witht he command:
$ sudo cdrecord -v driveropts=burnfree dev=/dev/cdrom -dao "isofile.iso"
Things seemed to go fine and I got this output:
TOC Type: 1 = CD-ROM
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Optiarc '
Identification : 'DVD RW AD-7540A '
Revision : '1.01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM) (current)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 890880 = 870 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 4194304 = 4096 KB
Track 01: data 100 MB
Total size: 115 MB (11:24.94) = 51371 sectors
Lout start: 115 MB (11:26/71) = 51371 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11240 (97:32/10)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 4A
Disk type: Phase change
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 308478
Speed set to 1764 KB/s
Starting to write CD/DVD at speed 10.0 in real SAO mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 100 of 100 MB written (fifo 100%) [buf 100%] 10.6x.
Track 01: Total bytes read/written: 105207808/105207808 (51371 sectors).
Writing time: 110.338s
Average write speed 7.0x.
Min drive buffer fill was 100%
Fixating...
Fixating time: 19.578s
BURN-Free was never needed.
wodim: fifo had 1658 puts and 1658 gets.
wodim: fifo was 0 times empty and 1585 times full, min fill was 89%.
But then when I mount the cdrom back, instead of the contents of the ISO image, I find the "isofile.iso" file!!
I tried installing brasero and using it instead, but the same thing happened, what could the problem be?
Last edited by Ferk (2010-11-07 14:24:46)You should not be using the "-dao" switch and get rid of the burnfree thing as that is now deprecated and will be used anyways if your drive supports it, so:
sudo cdrecord -v dev=/dev/cdrom isofile.iso -
Upload data from excel (not the excle file) into SAP
Guys,
how can we upload data from excel sheet into SAP? I mean just the data not the entire file,
I have a requirement where user press a button in excel sheet and the data in the sheet will get uploaded into SAP.
I am sure we have to use BAPI and some VB programming for macros, I will really appriciate if anyone can help how to achive this.
some sample code exampe will help.
Cheers!I think u r writing BDC for Uploading the data from excel flile to sap. for this is the code I am sending u can use then for Uploading data from excel to sap.
DATA: lv_filename TYPE rlgrap-filename.
FIELD-SYMBOLS : <fs>.
DATA : l_intern TYPE alsmex_tabline OCCURS 0 WITH HEADER LINE.
DATA : l_index TYPE i.
PARAMETERS : startcol TYPE i ,
startrow TYPE i ,
endcol TYPE i ,
endrow TYPE i .
PARAMETERS: p_flnam LIKE rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_flnam.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = sy-repid
FIELD_NAME = ' '
IMPORTING
file_name = p_flnam .
MOVE p_flnam TO lv_filename.
Uploading the flat file from the desktop
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = lv_filename
i_begin_col = startcol
i_begin_row = startrow
i_end_col = endcol
i_end_row = endrow
TABLES
intern = l_intern
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT l_intern BY row col.
LOOP AT l_intern.
MOVE l_intern-col TO l_index.
ASSIGN COMPONENT l_index OF STRUCTURE itab TO <fs>.
MOVE l_intern-value TO <fs>.
AT END OF row.
APPEND itab.
CLEAR itab.
ENDAT.
ENDLOOP.
I hope it will help u.
Regards
Nayan -
While converting spool to PDF, no data is coming in the PDF file.
Hi All,
I am submitting a z program ZPR022_INNCOMETAX_REPORT_COPY1 (which has some output display) from Z_ITSLIP_MAIL. I am creating a job, submitting the above program via JOB to SAP-SPOOL.
In program ZPR022_INNCOMETAX_REPORT_COPY1 , I am getting the run time job information and from there I am getting the spool id. Now I am converting the spool id to a PDF. This PDF should contain the output of the program ZPR022_INNCOMETAX_REPORT_COPY1. This output is normal output using Write statement only. But once the program is executed, I could find no data in the PDF file. When I check in SM37 and SP02, both the JOB and the SPOOL are created. What I feel is the program is not picking the spool id at the run time. Could any one help me in this regard how to proceed.
Please find the code below.
Program 1.
LOOP AT pernr.
CLEAR p_job.
p_stim = p_stim + 120.
CONCATENATE'ITSlip' pernr-low p_job sy-datum INTO p_job SEPARATED BY
space.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = p_job
sdlstrtdt = p_sdat
sdlstrttm = p_stim
IMPORTING
jobcount = l_jobcount.
SUBMIT ZPR022_INNCOMETAX_REPORT_COPY1
WITH pnptimr6 = 'X'
WITH pnpbegda = period-low
WITH pnpendda = period-high
WITH pnppernr-low = pernr-low
WITH pnpabkrs-low = 'IN'
VIA JOB p_job
NUMBER l_jobcount
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS ls_params
WITH immediately = 'X'
KEEP IN SPOOL = 'X'
AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = l_jobcount
jobname = p_job
strtimmed = 'X'
PRDMINS = 2.
sdlstrtdt = p_sdat
sdlstrttm = p_stim.
ENDLOOP.
Program 2.
IF sy-batch EQ 'X'.
LOOP AT pnppernr.
SELECT SINGLE * FROM pa0105
WHERE pernr EQ pnppernr-low
AND subty EQ '0010'
AND endda EQ '99991231'.
p_email1 = pa0105-usrid_long..
PERFORM get_job_details.
PERFORM obtain_spool_id.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
IF sy-sysid = c_dev.
WAIT UP TO 5 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ENDLOOP.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool'
'request to be created.'.
EXPORT gd_spool_nr TO MEMORY ID 'SPOOLTOPDF'.
ENDIF.
ENDFORM. " SEND_MAIL
*& Form get_job_details
text
--> p1 text
<-- p2 text
FORM get_job_details .
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM. " get_job_details
*& Form obtain_spool_id
text
--> p1 text
<-- p2 text
FORM obtain_spool_id .
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
MESSAGE s004(zdd) WITH gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM. " obtain_spool_id
*& Form convert_spool_to_pdf
text
--> p1 text
<-- p2 text
FORM convert_spool_to_pdf .
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM. " convert_spool_to_pdf
*& Form process_email
text
--> p1 text
<-- p2 text
FORM process_email .
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
ENDFORM. "process_email
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'IT Declaration'.
CONCATENATE 'ITSLIP' ' ' INTO gd_attachment_name.
it_mess_bod = 'IT FORM for this month'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
TABLES it_mess_bod
it_mess_att
USING p_email1
'MindTree Payroll team'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
CHANGING gd_error
gd_reciever.
ENDFORM. " process_email
*& Form send_file_as_email_attachment
text
-->P_IT_MESS_BOD text
-->P_IT_MESS_ATT text
-->P_P_EMAIL text
-->P_4422 text
-->P_4423 text
-->P_GD_ATTACHMENT_NAME text
-->P_GD_ATTACHMENT_DESC text
-->P_P_SENDER text
-->P_GD_SENDER_TYPE text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM send_file_as_email_attachment TABLES it_message
it_attach
USING p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
CHANGING p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM. "send_file_as_email_attachment
Points will be rewarded.
Regards,
BalajiHi,
I think you are retrieving the spool before the entire spool is generated.
Put the following logic to retrieve spool iD
CHECK WHETHER STATUS OF JOB IS COMPLETED OR CANCELLED
WHILE 1 = 1.
GET THE JOB STEPLIST WHICH HAS THE SPOOL NUMBER
CALL FUNCTION 'BP_JOB_READ'
EXPORTING
job_read_jobcount = w_jobcount
job_read_jobname = w_jobname
job_read_opcode = '35'
JOB_STEP_NUMBER =
IMPORTING
job_read_jobhead = wa_jobhead
TABLES
job_read_steplist = i_jobsteplist
CHANGING
RET =
EXCEPTIONS
invalid_opcode = 1
job_doesnt_exist = 2
job_doesnt_have_steps = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
BEGIN OF INSERTION U179942 E1BK928781
IF STATUS OF JOB IS COMPLETED(F) OR CANCELLED(A)
READ THE JOBSTEPLIST & GET THE SPOOL NUMBER
IF wa_jobhead-status = c_a OR wa_jobhead-status = c_f.
READ TABLE i_jobsteplist INTO wa_jobsteplist INDEX 1.
CHECK wa_jobsteplist-listident <> space.
w_spool_number = wa_jobsteplist-listident.
EXIT.
ENDIF.
ENDWHILE.
Best regards,
Prashant -
Unable to debug the Data Template Error in the Log file
Hi,
I am unable to debug the log file error message Please can anybody explain me in detail where the error lies and how to solve the error.The log file shows the following message.
XDO Data Engine ver 1.0
Resp: 50554
Org ID : 204
Request ID: 2865643
All Parameters: USER_ID=1318:REPORT_TYPE=Report Only:P_SET_OF_BOOKS_ID=1:TRNS_STATUS=Posted:P_APPROVED=Not Approved:PERIOD=Sep-05
Data Template Code: ILDVAPDN
Data Template Application Short Name: CLE
Debug Flag: Y
{TRNS_STATUS=Posted, REPORT_TYPE=Report Only, PERIOD=Sep-05, USER_ID=1318, P_SET_OF_BOOKS_ID=1, P_APPROVED=Not Approved}
Calling XDO Data Engine...
java.lang.NullPointerException
at oracle.apps.xdo.dataengine.DataTemplateParser.getObjectVlaue(DataTemplateParser.java:1424)
at oracle.apps.xdo.dataengine.DataTemplateParser.replaceSubstituteVariables(DataTemplateParser.java:1226)
at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:398)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:281)
at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:251)
at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:192)
at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:222)
at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:334)
at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:236)
at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:272)
at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
Start of log messages from FND_FILE
Start of After parameter Report Trigger Execution..
Gl Set of Books.....P
Organization NameVision Operations
Entering TRNS STATUS POSTED****** 648Posted
end of the trns status..687 Posted
currency_code 20USD
P_PRECISION 272
precision 332
GL NAME 40Vision Operations (USA)
Executing the procedure get format ..
ExecutED the procedure get format and the Result..
End of Before Report Execution..
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 2865643 on node AP615CMR at 28-SEP-2006 07:58:26.
Post-processing of request 2865643 failed at 28-SEP-2006 07:58:38 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 28-SEP-2006 07:58:38
Thanks & Regards
Suresh SinghGenerally the DBAs are aware of the OPP service log. They can tell you the cause of the problem.
Anyway, how did you resolve the issue? -
Date and Time in the flat file
Hi All,
I am trying to design a flow which will get data from a flat file. The file has a field which contains both the time and date. How can I handle this in BW? Do I need to creat 2 infoobjects and split the flat file field in start routine or transfer rule? Or is there any stadard infoobject which can hold both the data and time?
Also, the client asked me if I want a .CSV file or .XLS file. Which one is better for uploading into BW? Any PROS and CONS?
Best Regards,Hi,
There is no single Data Type which accepts the Date and Time. Other way is to look the data as CHAR. Else the Update Routine/Formula is the Best
In the Update Rule or Transfer Rule use the Formula
Let the Info Objects be
0date
0Time
The Transfer Rule/ Update Rule Formulas Be
0Date --> LEFT( 8, 'DateTime' )
0Time --> RIGHT(6, 'DateTime')
Then CSV is the best Option to accept the Data as it is ready for Upload
Regards
Happy Tony -
Append a file with date and name in the output file
I am running a script which produce an output in excel file, I would like the server name and the date in the output file, Both the servername and date has declared at the beginning of the script as
$server = test1
$date = Get-Date -uformat %Y-%m-%d
I am able to append either server or date but not both. Could you please help me out on this.
I would like the output file as '
server_report_date.xlsI got this working by
"C:\Aravind\Scripts\$server-"+"Report-" +"$Date"+".xls"
Thanks!!
Maybe you are looking for
-
Purchase Requisition development
Hello, Actually the purchase requisition is not readyly available in SAP MM therefore kindly let me know how to create the same and send me the screenshort for the same. thanks sujatha
-
Recently I went to my OneDrive on my 2014 MacBook Pro to get some docs, and ALL the folders were empty. (OneDrive is formerly SkyDrive.) I also use BOX. I checked the trash bins on my Mac and my OneDrive. Nothing. Then I realized that ALL my fo
-
I have a synchronus process which calls a webservice. The webservice is one of the bpel process. The process that calls this webservice errors on the invoke stating BINDING FAULT. <bindingFault> <part name="code" > <code>GenericError</code> </part> <
-
Error in application: custom component Localization in flex library project
Hi! I created custom component in flex library project and I created resource bundle for it. Now it all compiles, but when I add the component to other project I get an error: Unable to resolve resource bundle "Guestbook" for locale "en_US". So can s
-
Cryptography in networking,client can't get message from server but
Hello We are developing a simple Networking project where we are chaining CipherStreams to ObjectStream. When client gets connected to the server the server will send initial message to client and flush (but here is the problem) but the client does n