Date excell changes in $amount dd/mm/yy on iPhone

When I send an mail with an excell file which contains à date to my iPhone, THE date changes in à formula. How Can I change this without instelling excell on my iPhone. I just want to read the file on my iPhone and I work with THE file on Pc

I second the idea that you should always use TO_DATE and TO_CHAR if you want to reliably convert between dates and strings.
Without seeing your code, it is hard to say why your date format is changing, but the most likely reason is that you are changing users somewhere in the code. For example:
SQL> show user
USER is "OPS$ORACLE"
SQL> SELECT sysdate FROM dual;
SYSDATE
11-JUL-2003
SQL> ALTER SESSION SET nls_date_format='dd-Mon-yyyy hh24:mi:ss';
Session altered.
SQL> SELECT sysdate FROM dual;
SYSDATE
11-Jul-2003 10:15:12
SQL> connect jtest/test
Connected.
SQL> SELECT sysdate FROM dual;
SYSDATE
11-JUL-2003TTFN
John

Similar Messages

Is it possible to change the amount of storage in an iphone 5

i have a 32gb of storage on my iphone 5 and ive almost topped it off. im wondeing if there is anyway to upgrde the amount of storage i have to 64gb

You've had eight months to check out the answer ;-) Remove the doubt - it is not possible to add storage in an iPhone.

Can I change the amount of minutes on a single line plan?

I currently have unlimited minutes on a single line plan, but I hardly use my phone to make calls. I'm trying to lower my bill by reducing the number of minutes I have but I don't see an option to change my minutes in my account. It just gives me an option to change the amount of data I have.

I'm not sure if that's 100% accurate. I still have an old Nationwide min plan and when I log on to My Verizon I can still upgrade or downgrade my mins plan with one of the old Nationwide plans. Unless I'm misunderstanding the topic...

I want to change the amount in condition sheet using bapi_po_change

hi experts:
i want to use the bapi_po_change to change the amount in condition sheet in me23n.
the parameter i set is below:
DATA:
lt_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE, "返回内容
lt_poheader like bapimepoheader,
lt_poheaderx like bapimepoheaderx,
ls_pocondheader like BAPIMEPOCONDHEADER occurs 0 with header line,
ls_pocondheaderx like BAPIMEPOCONDHEADERX occurs 0 with header line,
ls_pocond like BAPIMEPOCOND occurs 0 with header line,
ls_pocondx like BAPIMEPOCONDX occurs 0 with header line,
lt_POITEM LIKE BAPIMEPOITEM OCCURS 0 WITH HEADER LINE,"
lt_POITEMx LIKE BAPIMEPOITEMx OCCURS 0 WITH HEADER LINE,
l_flag(1),
g_text(50) TYPE c.
CLEAR: l_flag.
lt_POITEM-po_item = '00020'.
lt_poitem-NET_PRICE = '15.10'.
APPEND lt_POITEM.
CLEAR lt_POITEM.
lt_POITEMx-po_item = '00020'.
lt_POITEMx-po_itemx = 'X'.
lt_POITEMx-NET_PRICE = 'X'.
APPEND lt_POITEMx.
CLEAR lt_POITEMx.
ls_pocond-condition_no = '0000006887'.
ls_pocond-itm_number = '000001'.
append ls_pocond.
ls_pocondx-condition_no = '0000006887'.
ls_pocondx-itm_number = '000001'.
append ls_pocondx.
CALL FUNCTION 'BAPI_PO_CHANGE'
EXPORTING
purchaseorder = '4500000002'
TABLES
return = lt_return
POITEM = lt_POITEM
POITEMx = lt_POITEMx
POCOND = ls_pocond
POCONDX = ls_pocondx.
but it doesn't work ,it goes to change the net price, how should i set the parameter? hunger for ur advice!!

Hi,
are you using BAPI_TRANSACTION_COMMIT or a COMMIT WORK after the bapi call?
Have a look at the code of fm ME_CCP_TPO_PRICE_CHANGE maybe that can help.
Best regards
Edited by: pablo casamayor on Jun 6, 2008 10:15 AM

Advice on Promoting Master Data Services Changes from one environment to another, e.g. DEV to UAT

Hi,
Has anyone got experience of creating a script to promote Master Data Services changes from one environment to another, e.g. Development to Production please?
The changes basically consist of adding several new MDS members which can be accessed via Excel.
Thanks in advance,
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

In MDS terminology an Entity is metadata, and Entity Members are the data.
Typically changes to an Entity (ie model design changes) are promoted to different environments. Model design changes can be replicated manually in each environment or you can Export the model and Import it into the target environment.
Adding, editing and deleting entity members is performed directly in each environment.
If you want to selectively import data from a Dev environment, you can use staging.
David
David http://blogs.msdn.com/b/dbrowne/

How to insert data into a table only when data has changed its value (when compared to the previous inserted value)

I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?

This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

Need suggestion to get data from change log table of ODS.

Hello,
There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
Please let me know if you have any suggestions.
Regards,
Sanjay Chaurasia.

Hi,
You can use the changelog table of the DSO.
Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
In the update rule Routine, give the tech name of Change log table instead of Active table name.
Hope it helps.
Krishna

HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

See this -> http://support.apple.com/kb/HT2727

Error while realigning aggregates through master data attr. change run

Hi all,
We are using Sales Overview cube (SD_C03) on which we have built aggregates. now during the master data attribute change run it tries to realign the aggregate once the master data is loaded via Process chain. In this step we are facing an error:
"Error while procesing aggregate <aggregate technical name>"
From ST22 we can find
Database error text........: "ORA-14400: inserted partition key does not map to any partition"
Internal call code.........: "[RSQL/INSR//BIC/F200009 ]".
Whereas from SM21 we can find out:
Database error 14400 at INS access to table /BIC/F200009.
/BIC/F200009 is the fact table of one of the aggreates we have. really looking forward to your valuable suggestion.
Thnaks,
Abhishek.

Hi Jogeswara Rao Kavala,
When I am pressing back or NO option it is showing error like this
What is this OK- Code means?
how can I resume this process, even it was not going to back screen also and only one option is available for exit from this is by going into MENU-SYSTEM-SERVICES-BATCH INPUT-CANCEL.
Sunil Boya

Date format changes in the middle of a program execution

In my C code I have a series of select statements.
When I first get a session to the database I use the following command to set the date format
alter session set nls_date_format = 'MM/DD/YYYY HH24:MI:SS'
It works fine for a few queries. After a while during the program execution I see that the date format changes to 'DD-MON-YY' format. This results in a series of error in my code because I expect the date format to always be in the 'MM/DD/YYYY HH24:MI:SS' format.
Any idea why the date format should change all of a sudden in the middle of the program execution.

I second the idea that you should always use TO_DATE and TO_CHAR if you want to reliably convert between dates and strings.
Without seeing your code, it is hard to say why your date format is changing, but the most likely reason is that you are changing users somewhere in the code. For example:
SQL> show user
USER is "OPS$ORACLE"
SQL> SELECT sysdate FROM dual;
SYSDATE
11-JUL-2003
SQL> ALTER SESSION SET nls_date_format='dd-Mon-yyyy hh24:mi:ss';
Session altered.
SQL> SELECT sysdate FROM dual;
SYSDATE
11-Jul-2003 10:15:12
SQL> connect jtest/test
Connected.
SQL> SELECT sysdate FROM dual;
SYSDATE
11-JUL-2003TTFN
John

How to change the amount of Vendor Line Item in FB60

Hi all,
I want to post the invoice in SAP with FB60. The journal is as follow:
Dr. Expense    1000 USD
Dr. VAT-Input    100 USD
      Cr. Account Payable     1100 USD
But the problem, the amount of Account payable is 1000 USD. Because I want to fill the amount in vendor line item (FB60) with the original expense (1000 USD).
I want to ask, there is any configuration in SAP to change the amount in vendor line item which it could be the same with amount of the original expense.
If you ever have same problems, plase share with me
Thanks,
John

Hi,
Thanks for your reply. The result of posting invoice that I want is as follow:
Dr. Expense    1000 USD
Dr. Vat - Input    100 USD
Cr. Account Payable   1100 USD
When posting invoices in FB60, there is a filed "amount vendor line item" at the top. Usually the field is filled with amount vendor 1100 USD, but I want to fill it with the expense amount (1000 USD). Which can be show the account payable 1100 USD.
Is there any configuration to change the field "amount vendor line item" ?
Thanks,

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

Scehdule Line Date getting change to future date once the Sales Order is saved

Hello Experts,
Good Morning to you all,
This is with respect to the Issue we are facing for the Orders having Product Allocation on multiple materials. Please find enclosed the detials below.
Issue : Scehdule Line Date getting change to future date once the Sales Order is saved. These Order's are having Product Allocation on multiple materials.
Description:
We have implemented Product Allocation few months back.
We have Product Allocation on multiple materials which are in demand and has been reserved for the Customers of different PA behaviors.
When we are trying to create the Sales Orders for the normal customer who is not on Product Allocation. The Order Schedule Line is getting changed to future date once the Sales Order is saved after initial creation.
These Order's are having materials of Product Allocation.
I have enclosed the sample screen shot of the error we are getting which saving the Sales Order and also the Order Schedule Line screen shot showing future date.
Error Message : There may be Product Over Allocation in Delivery Group 001.
Message No : VV023
This is a random behavior we are coming across and out of 10 Order 2 or 3 Orders is getting this Issue.
Please share your inputs how to rack this Issue.
Your suggestions will be highly appreciated.
I am unable to upload the attacments dont know what the reason.
Thanks,
Farhan.

Check whether you need to carry out the coding corrections as recommended in the following note:-
Note 52067 - Message VV023/VV024, but no prod.alloc.processing
But I wonder this is for older versions and not sure whether this would help you to overcome from the issue.
G. Lakshmipathi

I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup.

I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup. (which I now know was wrong). However, when time machine tried to restore it said there was not enough room to do a backup. It seems that it did a half backup because some essential files such as system profiler are now missing. Can I undo this restore...? What can I do to fix this

You need to do a full system restore, per Time Machine - Frequently Asked Question #14.
If that sends a message, please note the exact wording.

Date excell changes in $amount dd/mm/yy on iPhone

Similar Messages

Maybe you are looking for