Date fields are showing as / / in DSO for blank dates or no dates

We are loading flat file data to DSO and the date fields are showing as / / in DSO for blank dates or no dates in the flat file source system. We don't want to see this / / and instead of this, we would want to this field in DSO to be in blank. Please help how to achieve this. Is there any way to do this transformation. If yes, then can you please provide the sample coding.
Advance Thanks,
Christy

I have added the code and data loading is successful. while DSO activation, it is failing. The error message is,
Value '#' of characteristic 0DATE is not a number with 000008 spaces.
It seems that we need to change the code. Can you provide me the corrected code please. Thanks.
Christy

Similar Messages

Data arrived in ODS new data - all data fields are cleared

Hello Experts
We are loading every day since 3 years data into a DSO There is a simple start routine.
Issue:
Suddenly 1x record out of 12'000 records loses the data fields or in other words the data fields are cleared. The key part of the record still extists. The table of new data shows the record with all cleared data fields. Thus before activation the data are lost already somwhere in updating.
We dont use expert routines, no end routines ect. It is a simple 1:1 transformation with a simple start routine.
We debugged the start routine and the record still exists correctly at the end of the start routine with all entries in the data fields.
So quite tricky and we hope of some good ideas , you may help us.
Thanks a lot for your input and help
Christian
Our system is SAP BW 7.01 on DB6

Hello Raf
The data request has been split in 2 x data packages.
And the erroneous record was exactly the last data record in data package 1.
I have than increased the data request size from 10’000 Records to 50’000
records (default) and it worked than perfectly without clearing any data
columns
For me absolutely not understandable, why this can happen.
Do you have an idea.
Best regards
Christian

Search Page by date field not showing up results

Hi,
I am using Jdev 11g and new to adf.
My applciation needs a search page based on a date field.
I created a viewcriteria for the object which expects a date field from the user.( the bind variable is of type Date)
After this i dragged the viewcriteria as af:query (panel with table) on the jspx page.
Now when i run the application, that is when i enter the date (calendar autogenerated by query component),
it does not show up any results.
My date field in the database has a timestamp attached to it, somewhere i read that the timestamp may be causing the problem.
But i have not found any solution for this one.
This looks very basic to me, i am sure i am missing soemthing important.
Besides i even tried the approach of programmaticlly populating the Viewobject(by not using the any query component),
i can see the Viewobject being populated in the logs( the row count) but on the display page, no rows are shown.
I am sure i am doing something wrong for this one.
      AppModuleImpl am = this.getAm();
       ViewObject submittalVO = am.findViewObject("AcrSubmittallogView1");
       System.out.println("after getting VO");
       String subDate = this.getSubDate().getValue().toString();
       String query = " to_char(SubmitDtTm,'mm/dd/yyyy') = '"+subDate+"'";
       submittalVO.setWhereClause(query);
       System.out.println("QUERY>>>> "+submittalVO.getQuery());
       submittalVO.executeQuery();
      System.out.println("after executing query "+submittalVO.getRowCount());
       this.setRenderLogTable(true);But i actually want to use the built in query component instead of programmatically doing it.
Can someone please guide me further.
Any help will be grt.
Thanks in advance
ash
Edited by: user1175461 on Jul 15, 2010 1:18 PM

Still not working for me either, here's exactly what I'm doing.
My query is as follows:
SELECT
RO.repair_line_id,
RO.repair_number,
SR.customer_po_number, segment1,
trunc(RO.creation_date) as creation_date,
I've created a Bind Variable for the creation_date as follows:
<Variable
Name="createDate"
Kind="viewcriteria"
Type="oracle.jbo.domain.Date"/>
Which is linked to a view criteria:
<ViewCriteria
Name="RepairSearchVVOCriteria"
ViewObjectName="com.services.cs.vvo.RepairSearchVVO"
Conjunction="AND">
<Properties>
<CustomProperties>
<Property
Name="displayOperators"
Value="InAdvancedMode"/>
<Property
Name="autoExecute"
Value="false"/>
<Property
Name="allowConjunctionOverride"
Value="true"/>
<Property
Name="showInList"
Value="true"/>
<Property
Name="mode"
Value="Basic"/>
</CustomProperties>
</Properties>
<ViewCriteriaRow
Name="vcrow1"
UpperColumns="1">
<ViewCriteriaItem
Name="CreationDate"
ViewAttribute="CreationDate"
Operator="="
Conjunction="AND"
Value=":createDate"
IsBindVarValue="true"
Required="Optional"/>
</ViewCriteriaRow>
</ViewCriteria>
I then dragged the criteria into the page. When running it I get the following:
AND SR.customer_id =:psCustomerId) QRSLT WHERE ( ( (CREATION_DATE = :createDate ) ) )
<ViewObjectImpl><bindParametersForCollection> [3510] Bind params for ViewObject: [com.xxx.services.cs.vvo.RepairSearchVVO]RepairSearchAM.RepairSearchVVO1
<OracleSQLBuilderImpl><bindParamValue> [3511] Binding param "psCustomerId": 34758
<OracleSQLBuilderImpl><bindParamValue> [3512] Binding param "createDate": 2010-02-18
Which never brings back any data. My date's look as follows in the database:
'18-FEB-10'
I never get any results for the date. I've also tried using the to_char to format the date as the same format, but that always gives a variety of errors. This is driving me batty =0 Any ideas on why it never pulls back data?
Thanks, Graeme.

Custom Date Field not showing up in Pages Inspector

I created a custom date field in Address Book and now want to merge info from Address Book into a Pages template I created (including this new custom date field). When I go to the Inspector to add the custom date field to the template, it is not listed as a field - only Anniversary and Birthday are listed as "other" fields.
How do I get the custom date field to show up in the inspector?
Chris

Question asked and responded several times.
The Help is unaware of the true program behaviour.
In version 3, custom AddressBook fields are not usable in Pages.
_Go to "Provide Pages Feedback" in the "Pages" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'09
Yvan KOENIG (from FRANCE samedi 8 novembre 2008 18:13:21)

No data fields are available in the OLAP cube

i was able to access data in Excel yesterday, but now all the cubes that i have created cannot be accessed by Excel any more and after authenticating and selecting the cell for the pivot table i get this error:
No data fields are available in the OLAP cube
i just hope this is some process in HANA that needs restarting and not some endemic MDX problem. if so, where do i look?
has anyone seen this?
BTW, shouldn't there be a single log on for the connection? i have to enter credentials twice: 1 when creating the connection and 2 when opening the pivot table.

something/someone has locked my userid when i was recreating the steps in Excel (i don't think i have tried 'wrong' passwords, but i did try a ['wrong' user|http://misiorek.com/h/GMSnap206%202011-11-27.jpg]
Here are the steps:
1. Open [Excel|http://misiorek.com/h/GMSnap202%202011-11-27.jpg].
2. Enter [connections|http://misiorek.com/h/GMSnap203%202011-11-27.jpg].
3. Select [HANA cube|http://misiorek.com/h/GMSnap204%202011-11-27.jpg].
4. Select [Pivot cell|http://misiorek.com/h/GMSnap205%202011-11-27.jpg].
5. Enter credentials (see above).
I'm also not sure why I see these security messages:
[locked|http://misiorek.com/h/GMSnap207%202011-11-27.jpg], Microsoft [warning|http://misiorek.com/h/GMSnap208%202011-11-27.jpg], HANA [warning|http://misiorek.com/h/GMSnap209%202011-11-27.jpg], HANA db [warning|http://misiorek.com/h/GMSnap210%202011-11-27.jpg]

Office 2010 Don't print blank lines when data fields are empty

How do you do this in office 2010? Where do we go now?
This used to be under the Tools menu in previous versions:
On the Tools menu, click Mail Merge.
In the Mail Merge Helper dialog box, click Merge.
NOTE: You must select the main document and data source for the merge before doing step 2.
In the Merge dialog box, under When Merging Records, click either:
Don't print blank lines when data fields are empty.
-or-
Print blank lines when data fields are empty.
Click Close in the Merge dialog box, and then click
Close in the Mail Merge Helper.
NOTE: If you made no changes in the Merge dialog box, the
Close button is not available. Click Cancel instead.
Back to the top

Hi,
In Word 2007 or Word 2010, you can add
Mail Merge Helper to the Quick Access bar, and perform the steps then.
To add the
Mail Merge Helper command in the Quick Access Toolbar in Word 2007, follow these steps:
a.
In Word 2007, click the
Microsoft Office Button, and then click Word Options >
Customize.
In Word 2010, click File > Options > Customize Ribbon.
b.
Click
All Commands in the Choose commands from, and then click
Mail Merger Helper in the Choose commands from list.
c.
Click
Add, and then OK.
Best Regards,
Sally Tang

HT1918 I cannot access files I uploaded from an old computer. The email account to which some tracks are connected is deleted. For some reason my birth date doesn't work either. Is there some way to transfer the files to my current address?

I cannot access files I uploaded from an old computer. The email account to which some tracks are connected is deleted. For some reason my birth date doesn't work either. Is there some way to transfer the files to my current address and username?

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

Created By and Created Date fields not showing up on Custom List form webpart

Hi,
I have added Custom Listform WebPart on "DispForm.aspx" of custom list. I need to display, out of box fields "Author" [Created By] and "Created" [Creation Date] on this custom list form webpart, I have added them on the webpart, following is the code behind of aspx page:
<td width ="400px" valign= "top" class="ms-formbody">
<xsl: value-of select = "@Author" disable-output-escaping = "yes"/>
</td>
However these fields are not showing/populating data on the form ?? Any inputs ???
Regards

Hi,
I think that when you insert a custom list form web part you select “Item” content type, so custom list form is designed to display only the fields that are appropriate for that content type “Item”, but the item content type doesn’t contain the created and created by column, when you add the two columns, it will not find the field value. By default, the two columns will display at the foot of the list form using SharePoint:CreatedModifiedInfo.
Hope it can help you.
Xue-Mei Chang

DTP can Not extract data of date field from PSA to Target DSO

Hi everyone.
I enhanced several fields in datasource "2LIS_12_VCITM". that is date field "BLDAT" and another date type fields.
The data of date type fields are extracted very well from datasource to PSA.
But only field "BLDAT" among them are NOT extracted from PSA to target DSO.
Another date type fields is good. but only "BLDAT" field is empty.
I added "BLDAT" later than another date fields.
Is that the reason??
I don't know why.
Let me know the solution. pls~~~~

Hi,
Try deleting and recreating the DTP and loading again.
This solution refers to note 925941 and should be solved in SPS10.
Best regards,
Olav

Visio 2010 - Shape Data Fields Are Not Saving

I am having a problem with a number of shape data fields which are not saving data that has been entered into it, whether by entering it through the "shape data" or "define shape data" dialog boxes, or by editing the "shape
sheet".
All data fields appear to save normally while file is open, it remains as entered. However, when file is closed and later reopened select data fields do not retaining data correctly. Some retain nothing (null), or revert back to a "default"
value, see below for a couple examples:
Rack Units: Want to enter data as 1U, 2U, etc. ... in some cases it will save it as entered while in other cases it reverts to "1 RU", "2U", etc.
Room: Enter the data as I want it stored, most of the time it appears to come back empty, there are some shapes which will retain as entered.
Comments: Fails to retain any data
I have looked at a number of reasons to explain why, whether the problems occur with stencils is supplied by Microsoft, a vendor, or were custom created. Looked into whether it might have to do with a particular vendor's stencils/drawings
but I have a number of Cisco drawings where some save those fields as entered while others do not. I believe it could be a setting within the stencil preventing it from saving the data as entered, enabled in some cases and not in others.
I have checked "Protection" under the "Developer" tab, but nothing appears to be set to prevent editing/storing data entered.
Is there some setting(s) or field(s) somewhere that I can look at to allow this data to be saved as entered?
Is there a GLOBAL setting that can be set once within a file?
Thank you in advance for your time to assist me in fixing these problems. Have a great day!
MJ_NWE
MJ

>Can I build logic so that they can't fill in a field unless the previous field has been filled in?
It's theoretically possible to do this (e.g. each field has an action
of removing read-only on the next). It's considered extremely bad form
design, because people don't always fill in fields in the order
specified. If you watch people with a form they fill in their name,
address, other easy stuff; then they go back for the harder stuff.
They may want to save a form because one piece of information needs
research.
What you might like to consider is a large splash "FORM INCOMPLETE" in
Red or whatever, which vanishes when all the fields are completed.
Aandi Inston

Business Partner Creation/Display - General Data fields are missing

Hi,
We have an issue in our ECC6.0 system. In FPP1/FPP2/FPP3 transactions General data fields such as Driver's license, SSN, Employee class are missing under Identification tab. But the same are displayed in BP transaction code. What configuration would causing this issue.

I found a SAP Note 844949 which is talking about the same kind of issue. As per the note I regenerated subscreen containers for application object BUPA.
Call transaction BUSP and generate the subscreen containers for the application objects BUPA, FICA and BUPR. To do this, set the "All screens" indicator under "Generate All Screens or Just Selected Screens".
If this does not correct the incorrect display, use transaction BUPT for the business partner or transaction CAWM for the contract account to make sure that the fields are not missing due to the field modifications. (If you cannot call these transactions, exit the SAP Easy Access menu by using /n and then call BUPT or CAWM.

Data is not showing Under work center for any tabs

Hi,
Initialed EHp1 and done initial and basic configuration using Transaction SOLMAN_SETUP successfully.
SMD + wily installed successfully in satellite system system
I can see the satellite system data in Introscope Webview
Extractor Framework jobs are running fine.
But for under Transaction solman_workcenter-> Root cause analysis -> workload, trace analysis etc no data is showing.
1) Under workload analysis -> P07 Enterprise portal ->J2ee
it's saying that no application data found and for some tabs empty (just white) screen is showing.
2) Under workload analysis -> P07 Enterprise portal ->Host
Itu2019s giving "Error loading template 0TPL_0SMD_MPEH_WA_Q0018_H"
I am able to see only one graph i.e. under workload analysis -> overview tab.
I have found one warning for managing system for Extractor banned /inconsistent under Extractor FWK administration.
Best Regards,
AR

Hi,
In SMSY my settings are with old version i.e producte version is solution manager 7.0, i think i need to create again System and logical component by selecting produt name as SAP Solution Manager EHP1.
Do you think this could be a problem because i got inconsistency for extractor jobs for managing system under Extractor FWK administration.
in my system BI client is already activated in 001 client.
and how can we indentify whether Bi client is setup and activated.
Best Regards,
AR

Blank or null date fields are displaying 1/1/1901

I have optional date fields that users may leave blank. When they do, the result is that my report is printing 1/1/1901 (which I am guessing is a default setting somewhere in the options???) Can anyone point me in the right direction so that if the field is null, the "text string" & doesn't print?
Here's the formula, maybe it's a fundamental problem with the way I've done the formula:
if totext({Command.SHIPDATE}) = ""
then ""
else "Needed by: " & {Command.SHIPDATE}
Any help is greatly appreciated.

Is SHIPDATE a date type or text field? I an presuming a text field based on your example. If the date is defaulting to 1/1/1901, I am guessing that is a function of your database server rather than Crystal Reports. So I would alter your code to say:
if totext({Command.SHIPDATE}) = "1/1/1901"
then ""
else "Needed by: " & {Command.SHIPDATE}
Fuskie
Who notes you could also put the text and data object directly in the report and use a suppression formula instead of a report object formula...

'Raw' Data XMP view shows internal properties that don't exist in the data

In FileInfo view for an image, if I switch to the 'Raw Data' tab, it shows photoshop:ColorMode and photoshop:ICCProfile. However, when I check the actual XMP data of the image e.g. using exiftool or a text editor, these properties do not exist in the XMP data.
According to this thread: http://forums.adobe.com/message/5057589 these are both internal properties to PS / Bridge, which explains why they don't exist in the XMP. But why are they shown in the 'Raw' data view for the XMP then? Showing them here is just confusing as it makes it seem like they should exist in the XMP data.
I can't really see any point in including nonexistent tags in the Raw Data view. But if it is deemed necessary, how about highlighting them a different color, such as using a grey font instead of black? At least it would indicate that they were different to the real data.
P.S. This is with Bridge CS5, possibly the issue has been fixed in CS6?

Hi Paul
The issue is that the Bridge File Info panel is showing these tags in the XMP for the image, but if you check the XMP of the file, those tags aren't there.
As a side issue, Bridge File Info panel is also showing the XMP in a different structure to that which exists in the actual file. There are two issues here really
ACR is not writing the photoshop:ColorMode tag (or the photoshop:ICCProfile tag) to the JPEG (I checked the .xmp sidecar file for the RAW file and the photoshop:ColorMode tag does exist in there, but does not exist in the JPEG file converted through ACR).
Bridge's File Info panel is showing data in the XMP that is not actually there.
Although I would like the ColorMode tag added to the image, I don't think point 1 is a real issue, since the ICC profile is embedded okay. Point 2 does appear to be a bug (or at least it is confusing if it is intended behaviour).

Date fields are showing as / / in DSO for blank dates or no dates

Similar Messages

Maybe you are looking for