Date in Report is not correct !!

When i look in a PC´s daily Report the weekday is not korrekt, so NM for the 13th of March says, it was a Fryday, but its Saturday.

Is it a credit memo ?
For a credit memo the due date is the baseline date. This is the default rule. If you want that the credit memo is taken in account with payment terms, you must either link it to an invoice by filling the field REBZG with the invoice number either put the constant 'V' in the same field (REBZG). With 'V' in REBZG, the credit memo is taken in F110 according to its payment term.
see documentation of data element REBZG.

Similar Messages

Attendance list for courses, report RHXTEILA_LSO not correct.

The attendance list of courses report (RHXTEILA_LSO) is not displaying people if they were in a department/service/team that his since been delimited.
Has anyone else come across this problem?.
Jason

Jason,
If Org. Unit was delimited, you should see the "Org. Assignment" field blank.
Please check your filters, be carefull with dates, and also check using standard report by checking "standard selection screen" (RHTEILN0_LSO report).
Tell us the results. Regards!

Date of message is not correct in imap (thunderbird)

In webmail (gmail) it is ok, but in thunderbird it is wrong
example of message with wrong date displayed (displayed "fetch date" + time 00:48)
Return-Path: <xxxx>
Delivered-To: xxxx
Received: (qmail 21222 invoked from network); 26 Feb 2006 19:30:09 -0000
Received: from unknown (HELO x.x.x.) (xxxx@[x.x.x.x])
(envelope-sender <xxxx>)
by mta11 (qmail-ldap-1.03) with SMTP
for <xxxx>; 26 Feb 2006 19:30:09 -0000
From: <xxxx>
Subject: xxxx
To: <xxxx>,
<xxxx>,
<xxxx>
Importance: high
X-Priority: 1
MIME-Version: 1.0
Content-Type: multipart/mixed;
boundary="----?...+'MMS_MSG_COMPOSER'+1140982778"
example of message with correct date
MIME-Version: 1.0
Received: by x.x.x.x with HTTP; Fri, 30 May 2014 01:17:40 -0700 (PDT)
In-Reply-To: <>
References: <>
Date: Fri, 30 May 2014 09:17:40 +0100
Delivered-To: xxxx
Subject: xxxx
From: <xxxx>
To: <xxxx>
Content-Type: multipart/mixed; boundary=001a11c1b71cd8880604fa99adc4
It seams it does not parse the date correctly because there is no date field.
Is this a bug or a feature?

Date is a required fi=eld for email, it is not optional. therefore whatever defective program or web service that is generating these mails needs to be fixed.

Need help with recovering old account that e-mail is no longer valid. Birth date on account is not correct.

Does anyone know how to get an old account password when all the information on the account is not accurate and the e-mail address is no longer valid.

If none of the following will work If you forgot your Apple ID password (which sounds likely) contact Apple support: Apple ID: Contacting Apple for help with Apple ID account security

Export to Excel Action in MS SSRS Report not exporting all data in Report

Hi,
I have developed a complex Report that has many expandable nodes in a table format. The report works fine.
However, when I export the Report to Excel using Actions --> export to Excel, only the data in expanded nodes is included. The data in collapsed nodes is not included.
I am looking for approach to include data in expanded nodes in Excel Export. The expanded data can be expanded in Excel.
Any help in this regard will be appreciated.

Hi Abhijit PS,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

Hierrarchy not correct

Report total not correct: Hierarchy top node total is different to the levels below.
Eg: parent total is 1 but all the individual totals below add to more then 1.
Its reporting from Mulitprovider. It was working two weeks ago fine, no system changes have been made.
Thanks

As an example I will give you a hierarchie for an infoobject called "ZCOUNTRY". The hierarchie should join countries by spoken language. The countries have one key figure called "ZPOPULATION". We have three countries "France", "Swiss", "Germany".
The Infocube contains the following data:
ZCOUNTRY    ZPOPULATION
France         20
Swiss       10
Germany     40
The hierarchie says:
Languages
-> French
   -> France
   -> Swiss
-> German
   -> Germany
   -> Swiss
reflecting the fact that german and french are both spoken in the Swiss.
If you create a query you will get the following results für ZPOPULATION:
Languages   70
French      30
German      50
As you see: the difference is 10. This is what I meant.
In your case this seems pretty odd. Perhaps in your case the problem has something to do with the aggregation method. Is it possible that the key figure you use has a "min" aggregation, or perhaps an exceptional aggregation of "min" ?

The time showing on Cisco Unified CCX Historical Reportsare not correct

Hello,
Issue: The time showing on the Historical Reports are not correct
Error message/issue description:
While comparing the recorded calls from QM Management Destop system to the reporting system the timings on the historical reports appear to be at least an hour behind. Can these be synced to show the same times
Thanks !!
Shridhar Reddy

Hi Shridhar,
The time zone displayed in the report is either UTC or local time zone, based on the TIMEZONE settings in hrcconfig.ini. You can also change the time zone for each report as shown in the procedure.
Note: When a report shows date and time information for an event or an activity in the report data, that date and time is based on the TIMEZONE configuration in hrcconfig.ini.
The Start and End time is also based on the TIMEZONE configuration in hrcconfig.ini.
The difference between the server time and the selected time zone is displayed within parentheses beside the Start and End time.
The report generated time displayed at the bottom of the report is the local time of the HR client machine.
To change the time zone for a particular report, follow these steps:
Procedure:
Step 1: In the Unified CCX Historical Reports main window, choose the report settings that you want.
Step 2: Choose the Settings menu.
Note: You notice the check mark beside the Use UTC Time Zone for Reports menu option. This depends on the configuration in hrcconfig.ini.
If UTC time zone (value 1) is configured, the check mark is displayed. If local time zone (value 0 - Default) is configured, the check mark is not displayed. For more details, refer The hrcConfig.ini Configuration File, page 2-13.
Step 3Click Use UTC Time Zone for Reports to select or unselect the option manually.
Please refer the section "The hrcConfig.ini Configuration File" from page 33 onwards in the below link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85hrug.pdf
Also please refer the below thread for changing time zone.
https://supportforums.cisco.com/thread/2145833?tstart=0
Hope it helps.
Anand
Pls rate helpful posts !!

Report does not display some data

Hi,
Using:
- Crystal Reports 2008 SP3 as development platform.
- Visual Studio 2008 to launch the crystal report.
- SQL Server 2005 SP3 as database
Crystal Report:
- rpt file has been set up for a couple of months, working fine uptill last friday
- dataset comes from a SQL Server stored procedure with some parameters. Executing this stored procedure with these parameters, returns the correct result set
- showing the report using the Crystal Reports Viewer, some fields remain blank since the beginning of this week. Why does the report does not show all the data that is in the result set of the stored procedure ?
Any idea for a solution ?
Any idea to debug such strange behaviour ?
Thanks a lot for any help.

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

Report does not show updated data

Hi,
We are currently testing our AV implementation.
AV server, agent and collectors are up, but the reports are not being updated.
Reports are showing data as of Dec-22-2009, which is when the last time the unix servers (for both AV and source dbs) were rebooted.
We can see collection is happening:
SQL> select max(av_time) from avsys.av$rads_flat;
MAX(AV_TIME)
19-JAN-10 12.34.41.150446 PM
But the dw table is not being updated:
SQL> select max(av_time) from avsys.audit_event_fact;
MAX(AV_TIME)
22-DEC-09 04.58.55.255456 PM
Does anybody have any idea?
thank you

hi Karun,
correction, there are a couple of trace files after the db was restarted prior to starting AV and the collectors.
below are the message content:
trace file #1)
Instance name: AVDB
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 24635, image: oracle@audit1
Dynamic strand is set to TRUE
Running with 2 shared and 48 private strand(s). Zero-copy redo is FALSE
trace file #2)
Instance name: AVDB
Redo thread mounted by this instance: 1
Oracle process number: 30
Unix process pid: 24922, image: oracle@audit1 (TNS V1-V3)
*** ACTION NAME:() 2010-01-19 14:39:46.215
*** MODULE NAME:(sqlplus@audit1 (TNS V1-V3)) 2010-01-19 14:39:46.215
*** SERVICE NAME:(SYS$USERS) 2010-01-19 14:39:46.215
*** SESSION ID:(213.1) 2010-01-19 14:39:46.215
kwqmnich: current time:: 22: 39: 46
kwqmnich: instance no 0 check_only flag 1
kwqmnich: initialized job cache structure
what could this mean?
thank you!

Sharepoint 2013 Reporting services not fetching data via linked server

We have a functional SharePoint 2013 farm in production with WFE (Server 1 , windows server 2012) and WFE ( Server 2 , windows server 2012) and SharePoint databases including report server databases on (Server 3, which SQL Server 2012 on windows
server 2012)
Kerberos Authentication is enabled and Windows Authentication happens. Claims to Windows Service seems to work correctly too. No double hop issue. The SharePoint Reporting Services seem to be configured correctly and Reports get generated as expected
in the following cases.
1. If data is being pulled from Server A (SQL Server 2008 R2 Server on Windows Server 2008), Report gets generated no issues.
2. If data is being pulled from Server B (SQL Server 2008 R2 Server on Windows Server 2008), Report gets generated no issues.
The problem:-
We have a view on Server A, which is fetching data from Server B. This report does not get generated. Gives an NT/Authority logon failure. Server B is created as a linked Server on Server A. The setting to run under users security context is checked.
If I execute Query Builder from Report Builder 3.0, the query on the view gets the data and data is displayed in the report for next 10-15 min but after that the connections gets lost or if the user logs out and logs back in, the connection is lost
again.
Has some one experienced a issue like this? Can a report not work on a view getting data from linked server? Or I have missed some thing really important.
Any help is highly appreciated?
cheers!
Rachna
Rachna

Hi,
From your description, my understanding is that you got an error when you clicked System settings after configuring Reporting Services service application.
What size did you use for the memory? Please make sure the server has enough memory to run SharePoint and all services.
In addition, please open
http://localhost:xxxxx/SecurityTokenServiceApplication/securitytoken.svc to check if there is something about this issue.
Here is a similar post about this issue, please take a look at:
http://whitepages.unlimitedviz.com/2012/07/setting-up-reporting-services-2012-with-sharepoint-2013/
As this issue is about Reporting Services, I suggest you create a new thread on SSRS forum, more experts will assist you with SSRS.
SSRS forum:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=sqlreportingservices
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

PO value in MC$4 report not correct

Hi All
When I am executing report MC$4 for a particular month the output of the report give correct GR Value and Invoice Amount but PO Value is being shown as 0.00 which is not correct.
Please let me know why PO value is coming as 0.00.
Regards
Satish Kumar

usually MC$4 report is based on infostrcuture S012
And update rule for S012 is by default the PO date.
means if you create a PO in March, then an entry in S012 is created having the PO value.
if you receive in April, then SAP checks when the PO was created and posts into that month, in this example it will add the GR value to March record. Same for invoice receipt.
However it is possible to change update rules, what I have seen pretty often to have the GRs and IRs in the exact month when they were posted. In this case you may experience a sitaution like you described. In other words the PO was created in a period outside of your selection.
And in rare cases an infostructure update fails. This does not cause an entire rollback of the transaction, as it is just statistics and not accounting relevant. This would cause the same behaviour.
Extend your selection to an earlier period in MC$4 and check if you see the PO value then.

Values displayed in report do not match those in underlying data source

hi -- I have a report based on a view. The view contains a date (never null) and several numeric value columns
which can be null. The dates are outer joined to a date table, so even in Feb of 2011, the view will
have a month date for every month of the year, but the other columns are null values for Feb - Dec.
January does have values.
So, the view data (queried from sqlplus) is correct. However, when that view is queried via a Crystal report, all
data except the date is null -- even for complete years where there's a value for every month.
When I modify the view to replace nulls with 0s, all values (even the ones that are not null / not 0 when querying the view)
are now displayed as 0.
The dates are correct, and the database fields in question are in a details section; I can't figure out what's going on.
Ideas?
Thanks,
Carol

hi Brian -- First, I did try the other suggestion Convert Database Null Values to Default, and that didn't work.
Here's the info you requested:
Crystal Reports version: 12.3.3.812, product type Full
(I'm pretty sure this whole thing was working a couple of months back; I thought
   maybe I was remembering incorrectly when it started behaving the way it is now.
   I can't recall for sure, but it's possible that my upgrade to SP3 (is that the
   latest one?) and the hotfixes were applied betweeen then and now...I just thought
   of that as I was writing up this response.
Oracle database: same results on 9.2.0.8 and 10.2.0.4
Connection type: I'm not (I don't think) using ODBC.
My connection type for both databases is Crystal's Oracle Server.
The results in SQLPlus for both queries (the one that returns all
0s and the one that returns all nulls in Crystal) are correct. That is, there
are values where there are supposed to be values, nulls/0s where
there are no values.
I'm sure the problem is with the outer join to the date table. Here's
(part of) the sql for the view definition. Dates_between is a function
that returns a full list of sequential dates from the indicated start date
to the indicated end date, at the interval specified.
select *
from
(select
rep.report_name
REPORT_NAME,
to_char(start_date_time, 'yyyy')
YEAR,
start_date_time
START_DATE_TIME,
round(sum(decode(site_datatype_id, 45110, nvl(value, 0), 0)), 2)
COCHITI_ELEV,
    FROM r_month,
      ref_wa_report rep,
      TABLE(dates_between('01-JAN-2005',TRUNC(sysdate,'yyyy')+366,'month')) dates
    WHERE rep.report_id = 45
    AND date_time       = start_date_time(+)
    GROUP BY rep.report_name,
      dates.date_time
    ORDER BY rep.report_name,
      dates.date_time
When I don't use the date table, and the WHERE clause is as follows, the report
returns the correct data (that is, it actually returns the data that's in the DB).
The problem is that it doesn't return any rows if there isn't any data -- and I need
rows with dates only in that case:
from r_month, ref_wa_report rep
where rep.report_id = 45
group by rep.report_name, start_date_time
order by rep.report_name, start_date_time
The SQL query in Crystal was the same for all 3 different views:
SELECT "WA_45_SEDIMENT_STOR_SJC_VIEW"."START_DATE_TIME", "WA_45_SEDIMENT_STOR_SJC_VIEW"."COCHITI_ELEV", "WA_45_SEDIMENT_STOR_SJC_VIEW"."COCHITI_RG_CONT",
"WA_45_SEDIMENT_STOR_SJC_VIEW"."COCHITI_SJC_CONT", "WA_45_SEDIMENT_STOR_SJC_VIEW"."COCHITI_MONTH_SED", "WA_45_SEDIMENT_STOR_SJC_VIEW"."COCHITI_ACCUM_SED",
"WA_45_SEDIMENT_STOR_SJC_VIEW"."COCHITI_CONT", "WA_45_SEDIMENT_STOR_SJC_VIEW"."YEAR", UPPER(RTRIM("WA_45_SEDIMENT_STOR_SJC_VIEW"."REPORT_NAME"))
FROM   "ALBHDBA"."WA_45_SEDIMENT_STOR_SJC_VIEW" "WA_45_SEDIMENT_STOR_SJC_VIEW"
ORDER BY "WA_45_SEDIMENT_STOR_SJC_VIEW"."START_DATE_TIME"
I'm including the definition of dates_between below. Sorry, this is a ton of info, but might as well
include it all now!
create or replace
FUNCTION dates_between(start_date_time IN DATE,
                                         end_date_time IN DATE DEFAULT NULL,
                                         interval VARCHAR2 DEFAULT 'day')
RETURN date_array
PIPELINED
end_date DATE := end_date_time;
start_date DATE := start_date_time;
dates date_object := date_object(NULL);
temp_chars VARCHAR2(30);
BEGIN
IF end_date < start_date THEN
    deny_action('End date must be after start date!');
END IF;
BEGIN
    SELECT interval_name
    INTO temp_chars
    FROM hdb_interval
    WHERE interval_name = interval;
EXCEPTION WHEN others THEN
    deny_action('Dates between function INVALID ' || interval || ' interval');
END;
CASE interval
WHEN 'instant' THEN
    deny_action('Cannot use instant interval in dates_between! Use instants_between.');
WHEN 'hour' THEN
    IF end_date IS NULL THEN
      end_date := TRUNC(sysdate,   'HH24') + 1 / 24;
    END IF;
    FOR i IN 0 ..(end_date -start_date) *24
    LOOP
      dates.date_time := start_date_time + i / 24;
      pipe ROW(dates);
    END LOOP;
WHEN 'day' THEN
    IF end_date IS NULL THEN
      end_date := TRUNC(sysdate,   'DD') + 1;
    END IF;
    FOR i IN 0 ..(end_date -start_date)
    LOOP
      dates.date_time := start_date_time + i;
      pipe ROW(dates);
    END LOOP;
WHEN 'month' THEN
    IF end_date IS NULL THEN
      end_date := TRUNC(sysdate,   'MM');
    END IF;
    /* months_between takes the later date first */
    FOR i IN 0 .. months_between(end_date,   start_date)
    LOOP
      dates.date_time := add_months(start_date,   i);
      pipe ROW(dates);
    END LOOP;
WHEN 'year' THEN
    IF end_date IS NULL THEN
      end_date := TRUNC(sysdate,   'YYYY');
    END IF;
    /* months_between takes the later date first */
    FOR i IN 0 .. months_between(end_date,   start_date) / 12
    LOOP
      dates.date_time := add_months(start_date,   i *12);
      pipe ROW(dates);
    END LOOP;
WHEN 'wy' THEN
    IF end_date IS NULL THEN
      end_date := add_months(TRUNC(sysdate,   'YYYY'),   -3);
    END IF;
    /* months_between takes the later date first */
    FOR i IN 0 .. months_between(end_date,   start_date) / 12
    LOOP
      dates.date_time := add_months(start_date,   i *12);
      pipe ROW(dates);
    END LOOP;
END CASE;
RETURN;
END dates_between;

Reporting Install fails - Data Reader account is not the same as in management group

We recently upgraded from SCOM 2012 SP1 to R2, but I'm unable to get the reporting role installed. I get to the part where I enter the Data Reader account credentials, then get the error "Data Reader account provided is not same as that in the management
group." No matter what I do I cannot get passed this error.
Here is what I have tried so far:
- I have verified the correct DR account is set in the Data Warehouse Report deployment account and profile.
- I have deleted the DR account from the profile and added it back.
- Verified all permissions are setup properly on the SQL server for all databases, included reporting.
- Completely uninstalled SSRS and re-installed.

you must distribute the Run As account to ensure that all members of the resource pool (All Management Servers Pools) have access to the permissions in the Run As account.
Also check below link {It's same issue}
http://social.technet.microsoft.com/Forums/systemcenter/en-US/11e25eac-fbde-4ed5-aff5-4faa0563cfbc/scom-2012-reporting-installation-issue?forum=operationsmanagerdeployment
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Captivate 5 not Reporting Quiz scores correctly in LMS

Our organization is transitioning to Captivate 5 from Captivate 4. We are using SumTotal as our LMS. I took a CP4 project and converted to CP5, then uploaded it as a test. The results were dismaying.
Captivate 5 Scorm 1.2 apprears to send scores to the LMS instead of scaled scores. For example; If you have 20 questions the scaled score should always be 0 to 100.
In the example I converted from Captivate 4, I have 15 quiz questions. In my first try I scored 60% on the Quiz. Captivate reported to the LMS a percentage complete of 0 and a score of 90%. In my second attempt I scored 80% (which is required for passing from within the Quiz setup) and Captivate reported to the LMS 100% complete and a score of 100%.
I repeat, all worked fine with the same course published as Captivate 4.
I work for a very large multinational company. This is a killer for us if we want to go forward with Captive 5. In fact, I have just spent a lot of money upgrading everyone in my department - money wasted if we can't use the output with our LMS.
Does anyone have any ideas, and is there a way to get to someone at Adobe if this forum is unable to provide answers?
Sorry to sound panicked, but I guess I am.
Frank

Hi all
You're absolutely right. Adobe silence is extremely unsatisfactory and unprofessional. Below are the email correspondences. Does anyone know who are the President or the CEO and the email address? I think it’s about time to find out why from the top man himself.
Best regards... Flavian
From: Flavian Lim [mailto:[email protected]]
Sent: Tuesday, 21 September, 2010 12:00 AM
To: '[email protected]'
Subject: FW: Quizzing related forum posts?????
Importance: High
Hi Vish
Please furnish me with your updates immediately.
Best regards... Flavian
From: Flavian Lim [mailto:[email protected]]
Sent: Sunday, 12 September, 2010 8:18 PM
To: '[email protected]'
Subject: FW: Quizzing related forum posts
Hi Vish
Any updates? My timeline is behind schedule.
Thanks & regards... Flavian
From: Flavian Lim [mailto:[email protected]]
Sent: Friday, 10 September, 2010 1:24 AM
To: 'Shivaswamy Viswanath'
Subject: RE: Quizzing related forum posts
Hi Vish
Thanks for following up the issues. Attached, please find the files requested.
Hope it helps.
Best regards... Flavian
From: Shivaswamy Viswanath [mailto:[email protected]]
Sent: Thursday, 9 September, 2010 11:35 AM
To: [email protected]
Subject: RE: Quizzing related forum posts
Hello Flavian,
Can you share the cptx file with us?
Thanks,
Vish
From: Flavian [mailto:[email protected]]
Sent: Wednesday, September 08, 2010 10:17 PM
To: Shivaswamy Viswanath
Subject: Re: Quizzing related forum posts
Hi Vish
Yes, they are all checked.
Please revert soonest.
Thanks... Flavian
Sent from my BlackBerry Wireless Handheld
From: Shivaswamy Viswanath <[email protected]>
Date: Wed, 8 Sep 2010 15:48:38 +0530
To: [email protected]<[email protected]>
Subject: RE: Quizzing related forum posts
Hello Flavian,
Looks like the interaction data for the question is not captured. Can you please check whether ‘Report Answer’ option is checked in ‘REPORTING’ accordion of Quiz PI for all question slides? If not, can please enable this option and check it out?
Thanks,
Vish
From: Flavian Lim [mailto:[email protected]]
Sent: Wednesday, September 08, 2010 2:17 PM
To: Shivaswamy Viswanath
Subject: RE: Quizzing related forum posts
Hi Vish
Attached, please find a copy of the student record file as requested.
Thanks & regards... Flavian
From: Shivaswamy Viswanath [mailto:[email protected]]
Sent: Wednesday, 8 September, 2010 2:50 PM
To: [email protected]
Cc: Suresh Jayaraman
Subject: RE: Quizzing related forum posts
Hello Flavian,
Thanks for the reply. Regarding the thread Captivate 5 not Reporting Quiz scores correctly in LMS we would like to investigate further. Can you share those XML files with us? It can be found in Wamp Server, captivate results folder. Can you please zip it and send it to us?
Thanks,
Vish
From: Flavian [mailto:[email protected]]
Sent: Sunday, September 05, 2010 1:31 PM
To: Shivaswamy Viswanath
Subject: Re: Quizzing related forum posts
Hi Vish
The configuration is exactly as described in the Adobe help. Both the quiz and Wampserver is on the same machine. The rest is as per stated on the forum thread.
By looking at the results of the Cp5 Quiz Results Analyzer, does it make any sense? The statistics doesn't fit in at all.
Appreciate your interest in this issue. Hope we can work towards resolving this issue.
Best regards... Flavian
Sent from my BlackBerry Wireless Handheld
From: Shivaswamy Viswanath <[email protected]>
Date: Sun, 5 Sep 2010 11:39:40 +0530
To: [email protected]<[email protected]>
Cc: Suresh Jayaraman<[email protected]>
Subject: Quizzing related forum posts
Hello There,
This is Vish from Adobe Captivate Team at Adobe. I have observed multiple threads from you on the issues you are facing with Quizzing feature. I thought of mailing you to know the issues you are facing so that I could look at them. Can you please mail me those issues and if possible few sample files too?
Thanks,
Vish

In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

Hi DirTech,
Are both of these dates in the same Excel file? If they're in different files, are you choosing the same language for OCR (optical character recognition)?
If they are in the same PDF file, how was that PDF file created? Was it created from a third-party application (rather than an Adobe application)? If it was created by a third-party application, it could be that it wasn't written to spec, and that's why you're seeing some oddities in the PDF > Excel conversion. (See Will Adobe ExportPDF convert both text and form... | Adobe Community.)
Best,
Sara

Date in Report is not correct !!

Similar Messages

Maybe you are looking for