Reporting Install fails - Data Reader account is not the same as in management group
We recently upgraded from SCOM 2012 SP1 to R2, but I'm unable to get the reporting role installed. I get to the part where I enter the Data Reader account credentials, then get the error "Data Reader account provided is not same as that in the management
group." No matter what I do I cannot get passed this error.
Here is what I have tried so far:
- I have verified the correct DR account is set in the Data Warehouse Report deployment account and profile.
- I have deleted the DR account from the profile and added it back.
- Verified all permissions are setup properly on the SQL server for all databases, included reporting.
- Completely uninstalled SSRS and re-installed.
you must distribute the Run As account to ensure that all members of the resource pool (All Management Servers Pools) have access to the permissions in the Run As account.
Also check below link {It's same issue}
http://social.technet.microsoft.com/Forums/systemcenter/en-US/11e25eac-fbde-4ed5-aff5-4faa0563cfbc/scom-2012-reporting-installation-issue?forum=operationsmanagerdeployment
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali
Similar Messages
-
Hi All,
I have 2 machines with this problem now, both 64 bit (one a Pentium D, and one a Core 2 Duo), they both used to run Windows 7 x64, and both now have clean installed Windows 8 x86 on them (because I didnt install x64 as this a) didnt boot the installers)
and b) wouldnt run as these both seem to not have one of the CMPXCHG16b, PrefetchW, and LAHF/SAHF instructions.
I'm happy with them running x86 but would like them to be running windows 8.1..
Now I'm an MSDN subscriber, so I have downloaded and tried to boot the x86 versions of 8.1 (all editions), and all of them abort during boot at the blue flag with a "sorry your pc has had a problem and needed to restart"
I then thought I could install 8 and upgrade it in place using the store, so I installed 8 pro, and downloaded the update, which reboots the PC (happens same on both), and then crashes during boot at the same point.
I understand that the x86 version doesnt need the extra CPU instructions.. so why doesnt it work?
Any ideas?
Thanks, SamHi
Auggy,
Thanks for your reply.
There are no memory dumps in that location.. (there are no .dmp files anywhere under the $Windows.~BT folder)
There are some other files which look like other logs though so I will have a look in
those see if anything jumps out at me as a problem.
Is there any way I can collapse the code block above? Its a bit huge and Id like
to collapse it to make this more readable (id also post the other logs if so so
that I dont clutter the thread too much with logs.. )
Thanks -
My icloud-account is not the same as my apple-account
I want to use AirDrop, so I have to log-in with my icloud-account.
On the iphone, the login of my icloud-account is an old emailadress which I don't use anymore. And I can't remember the pasword of this icloudaccount. So it's not possible to delete this account on my iphone and make a new one withe my current apple-account. Could someone help me?Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device). -
I had a weird problem i have two id apple account one of them i forget the security question i try to ask for reset but when i login to first email and ask for reset they send the email to other email which is in other account !! I need it to send to the same email which i login through it i do not know how they know the other email is my second email
Now i can not reset my security question because they send it to other email which has been hacked !!Alternatives for Help Resetting Security Questions and/or Rescue Mail
1. If you have a valid rescue email address, then use this procedure:
Rescue email address and how to reset Apple ID security questions.
2. Fill out and submit this form. Select the topic, Account Security. You must
have a Rescue Email to use this option.
3. This is the only option if you do not already have a valid Rescue Email.
These are telephone numbers for contacting Apple Support in your country.
Apple ID- Contacting Apple for help with Apple ID account security. Select
the appropriate country and call. Ask to speak to the Account Security Team.
4. Account security issues almost always require you to speak directly to an
Apple representative to securely establish your identity as the account holder.
You can set it up so that Apple calls you, either immediately or at a time
convenient to you.
1. Go to www.apple.com/support.
2. Choose Contact Support and click Contact Us.
3. Choose Other Apple ID Topics and choose the appropriate topic for
your issue.
4. Follow the onscreen instructions.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
Apple ID- All about Apple ID security questions. -
How do I get access to the iCloud account to remove/change it on my phone to match my Apple ID?
iPhone 4, trying to access iCloud
cannot remember password
do not have access to the e-mail that the iCloud account is created under
have an Apple ID, it is a different e-mail than the iCloud account.
Went to store and the person there tried a number of things. I tried all manners of possible passwords as well.
End game: Just want to have an iCloud account I can use on my iPhone.Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device). -
SCOM 2012 R2 Reporting services installation error - data reader account
I have successfully installed SCOM 2012 R2 and SQL 2012 SP1 on the same server. I was trying to install the reporting server piece of SCOM.
When I get to the part that asks for a domain account, I get this error:
"Data Reader account provided is not same as that in the management server"
The account is not the same as the management server, and it does have read access to the data warehouse and reporting databases. Is there some other permission this account needs for reporting services?
Thanks.Adding more info：
I usually create the following account for SQL:
AD accounts for the following to be used with SQL Services:
SQL Agent for SQL Server Agent
SQL Analysis Services for SQL Server Analysis
SQL Database Engine for SQL Server Database Engine
SQL Reporting Services for SQL Server Reporting Services
For SCOM I create the following accounts:
SCOM DR - Used to deploy reports
SCOM DWR - for writing data from the management server to the reporting DW
SCOM MSA - Performs default actions
SCOM SDK - Used for updating/reading information from the operations Manager Database - Needs to be local administrator on the SCOM server
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Is there a way to verify which account SCOM thinks is the data reader account? I'm having an issue installing SCOM Reporting as it's telling me the account I'm providing during the install is not the same account that's specified in the management
group. Could this be verified somewhere in a SQL table?Hi There,
Data Warehouse Action Account - is for the Data writer account.
Data Warehouse Report Deployment Account - is for the Data reader account.
So i would suggest you double click the Data Warehouse Report Deployment Account and see what account
is present there.
And go to SSMS and verify if the below permissions are given for correct function.
Refer for permissions with screenshots.
https://social.technet.microsoft.com/Forums/en-US/4b58dcb1-7138-4bb1-a26c-9f5356113b11/scom-2012-r2-availability-report-errors?forum=operationsmanagerdeployment
Gautam.75801 -
Hi all,
my macbook pro became extermily slow for some reason, I rebooted it many times and same problem so I decided to reinstall the Mac OS X lion from the internet.
I tried installing lion internet recovery, it downloaded it and restarted. I got the "Install Mac OS X" window. then while installing I got the sad message " Install Failed Mac OS X could not be installed on your computer" and the only botton is "restart". Everytime I restart I gor the same message. Now I am trying to start from the harddisk but I does not show when you start the pc, keep clicking the "alt" botton. It only shows "Mac OS X Installer" and "Recovery HD". What Should I do?
I appreciate your help. Thanks.Thanks Baltwo.
I could format it and get the back up from time machine but it is not up to date so I want to leave it at last.
I tried to back it up on external hard drive and got an error, tried CCC for back up and error again.
Just wanted to do an update on the subject. Still trying to get it back. -
Intercompany Matching Report Balance is not the same as Plug account
Hi - we are running an ICP Matching report (standard setup without any custom consolidation logic). The balance in the report does not tie to the balance for the Plug account that we ran the report for - Intercompany report uses plug account as the parameter to generate the report.
For this grouping of accounts, we have both P/L and Balance sheet accounts plugging to the same Interco plug account. While we understand this is not standard practice, mixing the different account types in the same Plug account, could this be causing our issue?
Does the IC Plug accounts generate Periodic values for Income Statement accounts?
Any guidance is much appreciated.We separated the expense account from the liability accounts - we also created a rule to capture the prior year YTD plug account balance in the current month. This solved our issue.
-
I need to re-install my inDesign 5.5 but don't have my licence no for the previuos version (3). My 5.5 has been registered on my Adobe-account, but not the CS3, what can i do?
Why do you need InDesign CS (that is version 3) or InDesign CS3 (that is Version 5) to install InDesign CS5.5 (it is version 7.5)?
If it is an upgrade and asks you to input your serial of an older version, you have to get an find it. No one will help you here. If you can't find it and if you have not registered it, you are out of luck. You will have to spend money for a new version. -
ACR 8.4 CC RC install fails with AAM message 'patch not applicable'
ACR 8.4 CC RC install fails with AAM message 'patch not applicable' - Running Photoshop CC on OSX 10.7.5
Anyone seen this or have any ideas for a fix?
I also have my legacy CS6 installed on the same Mac - tried installing ACR 8.4 CS6 RC and that fails with the same dialogue box from AAM
The DNG converter installs no issue.
Thx
Chris.Do you have some other software, like Photoshop Elements 12 on your system that would generally also be compatible with ACR 8.4 final but isn’t compatible with the RC because the RC’s only for PS users?
I installed the RC the same day it was released on my computer that has PS-CS6 & PS-CC with Windows 7 and it worked ok, so the update generally works, but something isn’t on your systems.
Are you up-to-date with your PS-CC version, which seems to be 14.2.1:
http://blogs.adobe.com/crawlspace/2014/02/photoshop-cc-14-1-1-update-now-available.html
And is CS6 updated to 13.0.6?
http://www.adobe.com/support/downloads/product.jsp?product=39 <http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh> &platform=Macintosh -
While trying to re-install Mac OS X, appears the following screen:
Install failed
Mac OS X could not be installed on your computer
The installer encountered an error that caused the installation to fail.
Contact the software manufacture for assistance.
Click Restart to restart your computer and try installing again.You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests. Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it. The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer. Also
10.7 came both on USB Flash drive and Mac App Store installer versions. Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed. A combo update is available for installing on top of any version of 10.7. Otherwise only the preceding version could be updated to the next.
10.8 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed. A combo update is available for installing on top of any version of 10.8. Otherwise only the preceding version could be updated to the next.
10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
10.9.2 combo could be installed only once 10.9 had been installed.
For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility. -
Error: "install failed mac os x could not be installed on your computer"
Wanted to post an error I repeatedly got in case anyone else out there has the same issue. Went to do a snowleopard (10.6) upgrade and clean install on a mac pro (coming from 10.5). After about the "26 minutes left" mark I repeatedly got the following error:
"install failed mac os x could not be installed on your computer
the installer could not copy the necessary support files
click restart to restart your computer and try installing again"
i searched a bunch for this and could not find any definitive answers or help.
the log file was very vague, referring to errors writing package(s).
at first i thought it was a bad DVD drive as it was making a bunch of noise and taking a long time to boot. So i went and purchased a new DVD drive and successfully installed it. nope, same issue. then i pulled out all of my 3rd party RAM. nope. then i tried swapping the RAM into different configurations, nope.
after many many hours of various methods and re-partitioning, etc, just for the heck of it i replaced the harddrive, and it worked!
So, for those of you out there who get this error, try troubleshooting your hardware, try swapping your harddrive.You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests. Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it. The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer. Also
10.7 came both on USB Flash drive and Mac App Store installer versions. Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed. A combo update is available for installing on top of any version of 10.7. Otherwise only the preceding version could be updated to the next.
10.8 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed. A combo update is available for installing on top of any version of 10.8. Otherwise only the preceding version could be updated to the next.
10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
10.9.2 combo could be installed only once 10.9 had been installed.
For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility. -
Sept 4, 2014 My iPhone is not connecting to the Hotmail servers. Hotmail comes up with "The connection to the server failed". Are other people experiencing the same issues? From: gnof51
If your Hotmail account worked previously and it suddenly stopped and gave you that message, then it is likely a problem at th Hotmail end. Did you check the Hotmail website or contact Hotmail directly to see if they are experiencing problems?
-
How can i delete my icloud account but not the password to turn off the find my phone
how can i delete my icloud account but not the password to turn off the find my phone setting
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iPad and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless using iCloud Photo Library). When finished go to Settings>iCloud, tap Sign Out and choose Delete from My iPad when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).
Maybe you are looking for
-
TNS_ADMIN not respected, or how do I get sql developer to see my tnsnames
When I installed sql developer at home with a 'static' tnsnames.ora file, sql-developer picked it up right away, and I was able to use the 'connect identifier' pull down menu. However, at work, all of developer's computers have a TNS_ADMIN registry s
-
E7 restarts seem to be caused by T-Mobile/Orange r...
So, I got my Blue E7 from Nokia Direct on Friday last week, on a T-Mobile contract. As I got it set up as I liked I noticed that the phone would occasionally restart itself. Initially I put this down to trying to do too much all at the same time, b
-
EMERGENCY!!!!!!!! IS THERE ANY WAY TO RETREIVE AN ACCIDENTALLY DELETED BACK UP FROM MY TIME MACHINE DRIVE???? In other words, I emptied out a folder on my main MAC to make space and the next subsequent backup backed up the EMPTY FOLDER and then delet
-
Hi, We have a ALE scenario where we send IDOCs to other SAP system. The IDOCs we send are sitting in TRFC queues, they are not sent to the target system. I checked all the ALE settings, they are fine. The processing mode is "Immediate". When I go to
-
My wife has an iphone and i have an ipad...itunes always fires up with her account displayed. I plugged my ipad in..gave it a name and it auto-synced with her iTunes a/c. I now have all her music, pics etc now on my iPad and she has all my stuff on h