Date of origin,Default date-0015

Hi Seniors,
Can any body please put some light on Date of origin,Default date-0015.
How these 2 field have to be maintained and what effect these 2 have on 0015.
I am having difficulties in maintaining  0015 as any changes made in PA30 deletes the previous record.
Please update.
Is it advisable to configure 0015 in ACTION>>DEFINE INFOGROUPS>>INFOGROUPS as till now i have COP-0001,COP-0008.
After running the change in Pay till 0008 when i try to change 0015 in PA30 the old data is not stored any where and the new data takes its place.
Thanks in advance.
Edited by: srssaphr09 on Apr 12, 2011 9:21 PM

Hi Raj,
Thanks for the information,the shred information seems to be good.
Well the issue is there is a PERNR who was hired in the month of FEB and as per his joining bonus he was getting 35000k
But the negotiation was on and finally the Mgmt decided to make it 50,000.Now the changes has to be done without running the Change is pay,but has to be changed through PA40,but the changes are overwriting the previous record and new record comes into the system,but how to check the old data then,which is required for future purpose.
Please put some light on the following-The date of origin is by default the last date of the payroll period according to the control record. However you can overwrite it and also put in a PP # and year in which you want that entry to be processed.
I am in testing phase and the payroll is not been run,the contropll record is set monthly say-01.04.2010-30-04-2010- 1st payroll period.On the above how to go about 0015.
please share your knowledge.,
Thanks in Advance.
Edited by: srssaphr09 on Apr 13, 2011 6:34 AM
Edited by: srssaphr09 on Apr 13, 2011 6:47 AM

Similar Messages

  • Convert the date into user default date formate

    I am wrinting a bdc and i want to convert the date into user default date farmate ..please suggust the functiom module should i use...

    actually by using dats or d type you can get the user specific date itself.
    but if u have different dates format that need to be converted to the user specific date then you can follow below procedure
    1. retrieve the user format from usr01
        SELECT SINGLE datfm
          INTO w_datfm
          FROM usr01
         WHERE bname EQ sy-uname.
    pass w_datfm to the below FM (4th import parameter)
    2. create Z - FM and retrieve the user secific date
    FUNCTION ZFXX_USER_SPECIFIC_DATE.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(IW_DAY) TYPE  CHAR2
    *"     VALUE(IW_MONTH) TYPE  CHAR2
    *"     VALUE(IW_YEAR) TYPE  CHAR4
    *"     VALUE(IW_DATFM) TYPE  USR01-DATFM
    *"  EXPORTING
    *"     VALUE(EW_USER_DATE) TYPE  CHAR0008
    *1  DD.MM.YYYY
    *2  MM/DD/YYYY
    *3  MM-DD-YYYY
    *4  YYYY.MM.DD
    *5  YYYY/MM/DD
    *6  YYYY-MM-DD
    CASE iw_datfm.
      when '1'.
        concatenate iw_day iw_month iw_year
               into ew_user_date.
      when '2'.
        concatenate iw_month iw_day iw_year
               into ew_user_date.
      when '3'.
        concatenate iw_month iw_day iw_year
               into ew_user_date.
      when '4'.
        concatenate iw_year iw_month iw_day
               into ew_user_date.
      when '5'.
        concatenate iw_year iw_month iw_day
               into ew_user_date.
      when '6'.
        concatenate iw_year iw_month iw_day
               into ew_user_date.
      when others.
        clear ew_user_date.
    endcase.
    ENDFUNCTION.

  • Invoice cancelation Date to original Billing Date

    Hello ALL,
    When we try to cancel the invoice which was created in Last Month it is picking invoice created date.When canceling an invoice, the creation date of the initial invoice is the default date for the cancellation.  This causes an issue when the invoice was originally created in a month that is now closed.
    for example invoice created in July .and July Period were closed. now when we are trying to cancel the invoice it is taking invoice date ie july.but where as  it should take current date. please let me know how can i work around.
    Thanks
    Raju.

    Hello to all,
    I have been reading this subject about how to influence billing date when canceling invoice.
    I have the same problem, because copy control does not exit between F2 and S1 in SAP ERP 4.7, and I could not find any user exits that are valid for this purpose.
    There are lots of user exit for creating or changing invoice but for cancellation, I could not find any that works.
    I would be grateful if you could share how did you resolve your problem, or if you have some tips on how to resolve mine.
    Thank you,
    Ivana Filipovic
    Edited by: Ivana Filipovi263 on Jan 5, 2010 11:22 AM

  • Apple installation date shows as default date on all e-mails older than 24 hours. ??

    My MacBook was installed on 05/01/06 (the date of the Apple location name and the date many of the applications etc. were created).  Recently all e-mails (Mozilla messaging -- Thunderbird) older than 24 hours started showing the date received/sent as 05/01/06.  How can I fix this ?

    Yeah, I have done all that too.
    The second to last time I talked to AT&T, they said they did not have a device type in their computer system and they had to add that in their system. A couple days after they did that, I still had problems. One AT&T rep got an iPhone like mine and set up my e-mail account on that phone and tested it out 10 times by sending e-mail back and forth from phone to computer and etc. He said it worked perfectly fine without any issues. He said to restore phone back to factory settings and that he can tell nothing is wrong with their CWMX.com server as it worked fine for him when he tested out my e-mail account. After I spoke to the rep who did not have problems with the e-mail, I tried sending out e-mail and it would not work. That night, I restored phone back to factory setting as requested. That night after I did that, the e-mail still would not work. The next day, I still had issues. After that, I may have had issues maybe a couple times. Right now as far as I know it seems to be working okay but once I say that, I wonder if I will start having issues again? I wonder if not having my device type in their computer system would cause me all these problems and if so after updating it why did phone still have issues a couple/few days later? I'm sure it wouldn't take that long for it to take in their system if it was the cause.
    Since the rep tested out my e-mail account from the city/state where he was located and worked fine, and it didn't for me where I am located.... I am wondering if it has something to do with the area of the local towers?
    Nothing makes sense to me... and I have done everything that I possibly know and can. I just hope it continues to work and it stays that way and that I won't start having issues with it again.

  • Date of Origin

    HI Experts,
    Please tell me the purpose of "Date of Origin" feild in IT0015. and what kind of date it is?
    When i am trying to get the report for this in SQ01, i am getting date as "00/00/0000". But some date is there in IT0015.
    If i try to create a new record, by default i am getting one date in that feild. from where this date is appearing?
    kindly give me the details.
    Thanks in advance,
    Indhar

    Indhar,
    Can you check if the 'Date of Origin' in infotype 0015 is same as start date of org assignment in infotype 0001. If so, this will be maintained in configuration of infotype 0015.
    Personnel Management -> Personnel Adminstration -> Customizing procedures -> Infotypes -> Open the info type and double click on infotype 0015.
    Thanks!
    Edited by: Swapna on Oct 16, 2008 7:15 PM

  • Date/time original not set in EXIF

    When importing TIF files without metadata in its header (e.g. from a scanner) using a metadata preset that does include the "date/time original" this date is ONLY set in the IPTC data block, not in the EXIF data block. This data item is supposed to be shared between IPTC, EXIF and XMP according to the metadata working group spec.
    Is this an error or a feature of LR?
    The only way I know to enter the "date/time original" into the EXIF block in LR is by editing the "edit/capture time" (via Library/Metadata) and shifting the time by 0 hours. This then copies the IPTC date into the EXIF block. Also works in batch.
    Edwin

    It is the internal backup battery, but replacing it is not simple. Also, new internal batteries are hard to find. You will see a lot of "used" batteries offered--somewhat like buying used chewing gum, IMHO.
    You don't say which of the many PowerBook variants you have, but OWC sells new replacement backup batteries only for the 1.67ghz PBs with 17-inch monitors:
    http://eshop.macsales.com/item/NewerTech/PRAMPBG417K/
    Instructions for battery replacement are in these service guides:
    http://www.ifixit.com/Device/PowerBook_G4_Aluminum_Series
    NOTE: Apparenlty, 12-inch PowerBooks do not have internal backup batteries. You will see from these instructions that replaceing the batery--assuming you can find one--is not a trivial matter.

  • Actual shipping date vs original/requested shipping date

    Hi Experts
    We are new with SNC and want to not only measure supplier delivery performance on delivery date but also on shipping date - i.e. measure if the supplier shipped the goods on time.
    Do you know how we can get a hold of these two dates (actual vs original shipping date)? Are there any table fields to obtain this info or perhaps an option to load the dates into BW info cube?
    Thank you in advance.
    Best regards,
    Dan Bruun

    Hi Dan,
    You can get actual shipping date  and original shipping date from the table /1OM/ORDR4SDL<your client name>.(if client=800 then table will be /1OM/ORDR4SDL800).
    Go to table /1OM/ORDR7MP3<your client name> enter the PO number in field ORD.NO and copy ORDID use this ORDID in table /1OM/ORDR4SDL<your client name>.
    select the record with ORDID(copied from above table) and field SLDType=CONF then field TSTFRFRT will give you the original shipping date and TSTFRTOT will give you original delivery date.
    select the record with ORDID(copied from above table) and field SLDType=ASNC then field TSTFRFRT will give you the actual shipping date and TSTFRTOT will give you actual  delivery date.
    Regards,
    Nikhil

  • Not getting proper date values for original GI Date

    Hi,
    I have to Calculate Original GI Date based on Original promise Date and transport Date(Original GI Date = Original promise Date-transport Date) and I am getting Original Promise date as"21112008" and transport date as"20112008". when I subtract in Update rules as formula as (Original promise Date-transport Date) getting Original GI DATE as"01000001" as it is giving wrong date values.please help me whether i am going right way or is there any thing else i have to select in Update rule level (formula) to get proper date values or how can i approach to get original GI date.
    it is QUITE Urgent...please help any one to solve the Issue.
    REGARDS
    VENKAT.

    Hi Venkatesh,
    Please search SDN forum before you post any questions. There are lots of threads available for this scenarios.
    Use formula variables in Bex in order to achieve your requirement. 
    Links below, may be helpful:
    Formula variable with replacement path on system date
    How to creae days count variable in SAP BI-BEx
    http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/frameset.htm
    Regards,
    Ravi Kanth.

  • Delivery Date changed to past date while ATPing 2nd Line

    Hello Gurus,
    I posted a question a few days ago, but now that I found a new example i have more info of my problem.
    So here is the scenario. (we are set up for back order)
    Orders is created for 5000 units on 09.23.2008.
    we do not have enough stock to ship all. we only have 3000
    In our system or the way it is set up. line 1 shows 5000 with confirmed delivery 0,
    So we do an ATP check and a second line is created with qty 3000, a MAD date of 10.01.2008 and
    delivery date of 10.07.08. all is good up to here.
    so we still have 2000 to ship and the mad date is not until later in December: 12.01.2008
    so we go into line 3 and do an ATP check to see what promised delivery date will create.
    the system says 12.07.2008, ok all is good up to here.
    now if I SAVE this order, this is what happens.
    Line one for 5000 disappears
    Line 2 turns into Line 1 , but the delivery date changes from the actual date of 10.07.2008 to
    09.23.2008.
    Line 3 turns into Line 2 with the right date 12.07.2008.
    Line 2 turning into one is the one with the Issue !
    Are we doing something wrong ? is this a config problem ?
    Any feedback appreciated.
    thanks
    JD

    HI Mani,
    yeah I agree with you about the lines, but the only concern is the dates, the original delivery date was for example  march 7th for 5000, so we could not ship them all and we only shipped 3000 on April 7th, and we still had back order for 2000.
    those 2000, lets say have a Mat Ava Date of Today, so If I do an ATP check, the system would create a delivery for maybe November 10th.
    so far all is good, when I save the order in Va02, and the line 2 becomes line 1 and line 3 becomes line 2 ( which I am ok with )
    the only thing that I think is strange is that the new line 1, the one that accounts for the 3000 shipped on April 7th, now has a delivery date of March 7th.
    and that is not accurate, the requested delivery date was march 7th, but we shipped on April 7th, so why does the system override the actual date with the first date.
    that is what I think it is strange and I am not sure how to fix it.
    Let me know what you think and thanks in advance!
    JD

  • Defaulting dates in IT00041

    Hi All,
    I have a requirement to default Original Hire date and PTO date in New hire action and default Original hire date, PTO date and Termination date in Termination action. again default Original hire data, PTO, Termination date, Rehire date in Rehire action. where as Original hire data and PTO date should be same.
    I was able to config Original Hire date and PTO date to default as the date of EE hire. Can any one help me out with Other two actions. I am getting Original hire data and PTO date in all the actions. How to get other dates. Here date means actual date not Date type.
    Hope you got my point, Any inputs are welcome.
    Thanks
    Sang

    Hi Sangarshitha,
    Go to V_T582A for IT41 there you select Display & Selection field and create w/o start give value as 1. It will automatically work.
    Regards
    Pavani
    Remainder: Points to be given on Answers

  • Return default data if no data is returned by sql query

    Hi,
    I have a requirement.
    I have an inner query that returns no data. However I still want to return default data (say 'abc'). The below sql does not return anything inspite of using nvl . Please advise .
    select nvl( x.vencode,'abc') vencode
    from
    -- below sql returns no data!
              SELECT a.vencode vencode,
                     a.mid mid,
                     a.title title,
                      ROW_NUMBER() OVER (PARTITION BY a.vencode ORDER BY a.title) rnk
               FROM (
                     SELECT *
                     FROM    (SELECT vencode FROM vendor where login is not null and vencode = 'BKFI'
                                        and login > (sysdate - 90) )
                          CROSS JOIN
                             (SELECT mid, title, ROWNUM num FROM tcommmemos where mid is not null)
                    ) a,        
                   (SELECT * FROM (
                    SELECT v.vencode, tc.mid, tc.title
               FROM
               (select  * from vendor
                     where login is not null and vencode = 'BKFI'
                     and login > (sysdate - 90)) v,
                tcommmemosviewed tcv, tcommmemos tc
               WHERE     v.vencode = tcv.vencode
                     and tc.mid is not null
                     --AND tc.post_date > v.hiredate
                     AND tc.mid = tcv.mid)
                   ) b
                   where a.vencode = b.vencode(+)
                     and a.title   = b.title(+)
                     and a.mid     = b.mid(+)
                     and b.mid is null                               
    ) x              

    Use any aggregate function it'll always return a value even if there no data in the table
    create table r_dummy_1 (a number);
    SQL> select * from r_dummy_1;
    no rows selected
    SQL> select nvl(max(a),1) from r_dummy_1;
    NVL(MAX(A),1)
    1

  • How to change the default date in Person assignment tab?

    Hi experts,
    Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
    Thanks and rgs,
    Michelle

    Hi Michelle,
    Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
    Hope this is useful...
    Regards
    Aatish

  • How to change default Date format in BO 6.5 SP4

    A problem with date display has been reported to me by one of our users -  in BO 6.5 - since installing SP4.
    The default date format is now MM/DD/YYYY
    I have tried to recreate this on my PC and have been able to confirm that this is the case.
    Most of our PC's will have two versions of Business Objects on them - for 5.1.6 and for 6.5 - that is the case for my PC.
    If I create a new BO document based on a spreadsheet with three entries in the spreadsheet as follows:-
    20/01/2009    20-Jan-2009  20th January 2009
    This displays in BO 6.5 as
    1/20/2009   1/20/2009    20th January 2009
    My PC regional setting is UK and the time displays DD/MM/YYYY
    Can you advise how to correct this problem please.

    Hi Sebastien
    Thank you for your response.
    I haven't checked Dimension in universe because this is happening even when datasource is an Excel spreadheet - as per details in previous post.
    I have looked for *.sbo files and found one for ODBC.sbo in the Version 5 folders on PC - with date format details in it which I've changed - that doesn't make any difference.
    Any other ideas?
    Regards
    Linda

  • How do i find out my iPhone's original purchase date?

    I bought it used from eBay and don't know when the owner bought it. It has warranty util July 21 and i want to extend it, so i want to buy AppleCare. One AppleCare it says it will extend the warranty for two year since the original purchase date. So how do i find out if i can buy AppleCare for my iPhone or not and how long would it cover my iPhone for?

    You don't need to know the original purchase date (though it will be one year prior to the date of warranty expiration). You have until July 21st, the day when the warranty expires, to purchase and register an AppleCare plan, presuming you can still find the original plan. Apple no longer sells that plan; they sell only AppleCare+ which has to be purchased at or within 30 days of the original purchase. But some dealers still have the retail AppleCare for iPhone package available.
    If you can find and register the original AppleCare, it will be in effect until July 20th, 2013.
    Regards.

  • I have made a burn folder with photos exported from I-photo.  It now shows in information, that the date is created and modified is different from the original digitized date.  How can I get the original date to show in the info from Finder?

    I have made a burn folder with photos exported from I-photo.  It now shows in information, that the date  created and modified is different from the original digitized date.  How can I get the original date to show in the info from Finder?

    The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
    Regards
    TD

Maybe you are looking for