Delivery Date changed to past date while ATPing 2nd Line

Hello Gurus,
I posted a question a few days ago, but now that I found a new example i have more info of my problem.
So here is the scenario. (we are set up for back order)
Orders is created for 5000 units on 09.23.2008.
we do not have enough stock to ship all. we only have 3000
In our system or the way it is set up. line 1 shows 5000 with confirmed delivery 0,
So we do an ATP check and a second line is created with qty 3000, a MAD date of 10.01.2008 and
delivery date of 10.07.08. all is good up to here.
so we still have 2000 to ship and the mad date is not until later in December: 12.01.2008
so we go into line 3 and do an ATP check to see what promised delivery date will create.
the system says 12.07.2008, ok all is good up to here.
now if I SAVE this order, this is what happens.
Line one for 5000 disappears
Line 2 turns into Line 1 , but the delivery date changes from the actual date of 10.07.2008 to
09.23.2008.
Line 3 turns into Line 2 with the right date 12.07.2008.
Line 2 turning into one is the one with the Issue !
Are we doing something wrong ? is this a config problem ?
Any feedback appreciated.
thanks
JD

HI Mani,
yeah I agree with you about the lines, but the only concern is the dates, the original delivery date was for example march 7th for 5000, so we could not ship them all and we only shipped 3000 on April 7th, and we still had back order for 2000.
those 2000, lets say have a Mat Ava Date of Today, so If I do an ATP check, the system would create a delivery for maybe November 10th.
so far all is good, when I save the order in Va02, and the line 2 becomes line 1 and line 3 becomes line 2 ( which I am ok with )
the only thing that I think is strange is that the new line 1, the one that accounts for the 3000 shipped on April 7th, now has a delivery date of March 7th.
and that is not accurate, the requested delivery date was march 7th, but we shipped on April 7th, so why does the system override the actual date with the first date.
that is what I think it is strange and I am not sure how to fix it.
Let me know what you think and thanks in advance!
JD

Similar Messages

Billing Date change to past date.

Hi,
Basically, I want to change the billing dates of few Invoices generated on 4 December 2008 to 29 November 2008 due to some tax changes in business.
Is there any way we can change the billing date of an invoice to a past date?

Dear Christino,
Check with,
T. Code: VF02
Key-in your Invoice Doc. No. and "Enter"
From menu bar,
Go To --> Header --> Header
Under Tab: Accounting Data, there is one Field: Billing Date, which would be in Editable-mode.
Change the Billing Date, as required.
Best Regards,
Amit

Scheduline Date to follow Past Date

Dear SD Expert,
My users are doing a back log for Sales Order in December 2008 & January 2009.
In Sales Order i enter the Request Delivery Date as a past date, i will then proceed to enter my materials to be sold.
But in the schedule line of the material is has 2 lines:
1. First line is the past date
2. Second line is today's date (greyed out)
Now i know system does an ATP that's why its giving today's date. But is there a way to configure the schedule line to follow a past date instead of proposing a second line which is today's date?
Please advise. Thanks.
Regards,
LEE

Dear Lee,
Scheduline lines will be happened based on the material availability.
For Example:- If you create sales order on today and material is available today then scheduline will get conformed on today itself.
-->If stock not available system will generate the another scheduline in the future date with conform quantity.
-->If the stock is not available then system will calculate conform date or material availability date based on the material Replenishment leade time.
+But is there a way to configure the schedule line to follow a past date instead of proposing a second line which is today's date?
So through configuration you can't change material conformation dates in the scheduline this is depend upon the availability of the material.
I hope this will help you,
Regards,
Murali.

Data (Master Data Changes and Transaction Data) from SAP BW to SAP BPC 5.1

Hi guys
I have seen posts on this forum describing data transfers from SAP R/3 to SAP BPC. I assume the procedure for data transfers from SAP BW to SAP BPC 5.1 should be the same i.e. using SSIS packages.
However I have some unique requirements -
1. DATA AT DIFFERENT AGGREGATED LEVELS - I need data from SAP BW at different levels - Some data comes at Product level while other at Customer level and some at Project Level. The current procedure takes BW queries output in excel sheets (6 files) and then use the data manager package to load the data in SAP BPC 5.1 using appropriate transformation and conversion files. This procedure is highly manual and I am looking at using SSIS package to do this. However, because of having data at different levels, it becomes a little tricky. How can we achieve this using SSIS?
2. UPDATING MASTER DATA - I need to update the master data (dimension members) in SAP BPC 5.1 at the start of every month. The current procedure compares (in MS ACCESS) the data from the queries mentioned in 1 to the dimension members in SAP BPC 5.1 and spits a file with the new entries which needs to be manually updated in the appropriate dimensions using Admin Console. I am looking at automating this task. I cannot just replace all the contents of a dimension with the members coming from SAP BW since the dimension members contains some dummy members which are used for planning.
3. HIERARCHY CHANGES - What is the best way to capture the hierarchy changes in SAP BW into SAP BPC 5.1?
Please advise.
Thanks,
Ameya Kulkarni

Hi Ameya,
how did you solve the described problems? Can you give some hints about uploading master data and updating the hierarchy?
BR, André

TSR Visit recording in CIC0, 'To date' changes to current date

Hey, hopefully this is the right forum for this.
When TSRs create a TSR Visit in the Interaction Centre (Trans CIC0), they are usually recording this for a historical date. However, the Interaction Centre's standard behaviour is it assumes you are in a call centre environment and are working on a "here and now" basis. So what it does when TSRs create a visit record, is default the TO (end) date to today's date once they hit the save button. They can over write this by overtyping the TO date with the actual (past) date once it has been saved and it will then overwrite the record with the required date.
I've been assigned the job of changing this standard behaviour to allow past dates to be entered and saved without having to create, save, overwrite and save again.
So what i'm looking for is function modules or locations of the code that is doing this.
Any help would be very appreciated.

Hi,
You just need to do basic configuration and do not need to do any coding to achieve your objective.
Go to
Transaction Code SPRO
IMG -> CRM -> Basic Functions -> Date Management -> Define Date Profile
Select the relevant date profile assigned to your activity transaction type.
(If the date profile is a standard SAP defined date profile copy the date profile by selecting the date profile and clicking on the "Copy Icon"; Similarly if you are using standard SAP Activity transaction copy the transaction in IMG -> CRM -> Transaction -> Basic Settings
Go to your Activity Transaction type that is creating the Visit record; Standard date profile or Activity transaction is the one whose ID does not start with "Y" or "Z". Also when you create your own date profile or activity transaction your ID should start with "Y" or "Z". )
Double-Click on "Date Types" on the left hand side tree
Select the corresponding Date Type
Click on the "Details" icon
On the bottom right portion of your screen there is "Default Values for Manual Entry" tab. Unclicking the "Current Time" will achieve your objective.
Regards,
Deepak

Capture data changes to Control Data

Hi,
I want to replicate any data changes made to the config/control data of SPRO to a non-SAP system. Would there be user exits or change pointers for these transactions? How can I confirm this? If this is not possible then what options are available in SAP ECC?
Eagerly awaiting a response..
Thanks in advance

Dear folk,
In SAP we have two tables CDPOS and CDHDR for the changed data to be maintained.
CDHDR-Header data
CDPOS-Item data.
Based on ur requirement , u can check these tables by giving the table name and field name.
to the appropriate fields in the CDHDRa nd CDPOS.
Revert if u need any help regarding this.
Regards
Abhilash.

Iphoto date change giving wrong date

When I try to change the date of a scanned photo I get a strange and incorrect date in response.
For example if I put in 25/01/1985 I get a return date of 12/11/573. Each time I try to input the correct date the return date is earlier and earlier.
I have tried changing the file date through terminal. I have tried resetting the system date but the changed photo date still won't move to the one I input.
Does anyone know how to fix this?
Cheers
Paul

Hi
Yep that is where I made the previous changes. I went back there and reset everything to default settings. I also went into the Date and Time pane and changed automatic time, date and zone settings on and off, trying various combinations. But no joy. The photo date won't accept the one I give it.
This is really annoying. I am otherwise very happy with the Mac. Such a shame that a part of the iPhoto functionality is ruined by this. I was looking forward to having my photos in chronological order.
Oh well. Hopefully Apple will do something to fix the issue soon.
Thanks for trying to solve it anyway.
Regards
Paul

Why wont the modify date, change the creation date?

I tried to use the "Adjust Content Created Date and Time" option but it doesn't change the creation date. So I have footage from 1992 stuck in a 2010 event folder. From things I read online it says this should change too. Am I reading this wrong? Will 1992 be stuck in 2010 forever, ha. Any help is great. I have also provided a screen shot of the Event from 1992 stuck in the 2010 Event Library.

Yeah the change date inside of FCPX doesn't seem to work as advertised, however you can change the date, so that FCPX sorts it properly. First delete the clip from FCPX, make sure you have the original somewhere though.
Open a terminal window and use the following command:
touch -t 199211280800.00 <path/filename>
Where the format is: (use leading zeros if necessary for date & time)
first four digits: year
next four: month and day
next four: time of day (in 24 hour format)
next 2: seconds as a decimal (this is optional, if you leave it off you will get 00 seconds)
The above example will change the file date to Nov. 8, 1992 08:00:00 AM
This will change the created, modified and last access dates of the clip/file.
Then reimport the clip and FCPX should recognize it properly.
I've done a dozen or so rips from VHS of old home movies and here is how I change the dates. Works every time.

Partial delivery per item in sales order and ATP - schedule lines

Hi,
I've problem regarding ATP- schedule lines and partial delivery flag.
In sales order there is flag Partial delivery per item B / 1 . That means create only one delivery even with quant 0. That comes from customer master or customer info-record and it is OK.
Please look at next example.
Customer requires:
10 PCS of materail A on date X. Only 5 PCS are available on date X.
10 PCS of material B on date X 0 PCS are available on date X, 10 PCS are available on date Y.
So if we create outbound delivery on date X it will contain only 5 PCS of material A. No successive deliveries will be created for material A because of the flag B/1. That item is closed.
Problem is with material B.
The sales order will be open because of material B and on date Y we can easily create another delivery with 10 PCS of mat B.
That is wrong. Agreement with customer is only one delivery for ALL items in sales order. If we create delivery on date X it should contain only materials which are available on date X and sales order should close.
Do you know how to fix this problem?

Hi,
I've think you didn't understand my requirement. I allways get schedule lines but they are confirmed on different dates.
Example in same sales order we have:
Schedule line for item A:
DATE X confirmed quantity 10
Schedule line for an item B.
DATE X confirmed quanitity 0 (zeroe)
DATE Y confirmed quantity 10.
I would like to create outbond delivery on date X with:
item A quantity 10
item B quantity 0.
And if that hapens than B/0 rule will work or reference customzing that you suggested before. So order will be closed because all items are processed or referenced once.
Do you know how to do that?
Regards

Batch date change corrupts the dates

I need some help with the batch name change in iPhoto. I recently tried to change some dates of an entire event to 12/25/2008. Once the batch change was done, the dates all appear as a corrupted year of 12/09/-2007 with the line in them. They then disappear completely from the event and can only be found on the photo section.
I have tried the adjust date and time and I have tried rebuilding the library and transferring photos to new libraries, but get the same error.
thanks,

Close iPhoto, delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto and see if that helps.
Happy New Year
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Restrict Date Entry with Past Date

Hi,
We have a scenario, where system should not allow to enter the Appointment Date in Past. Appointment Date is a date type in service order transaction and date rule is blank for this date type.
Kindly help if this can be achieved through configuration.
Thanks and Regards,
Nikeyta

I would do it with coding in the UI as I know no way of doing it in customizing or configuration.
Best regards,
Thomas Wagner

Whether Shopping cart delivery date can be in past date!!

Hello SRM Gurus,
There is a requirement from my customer, it may be strange.
The requirement is : Shopping cart (requestor) should be abe to save having delivery date as a past date and PO in SRM with same past date.
Is there any BADI available or programming is required?
Pls post your sugesstions.
Regards
Madhan

i think you can do this config . 584 message ready made available for you as E . now you can turn to W
and do lot of testing for entire procurement cycle.
.. it may give some trouble approval time too. check it up
IMG activity 'Influence Message Control' (Enterprise Buyer -> Cross-Application Basic Settings -> Message Control):
Select the line with business object BUS2121 and double-clicking on 'Message Control'.
                    Message cl:   BBP_PD
                    No. :          584
                    Text:         W
Save the new entry.

STO rel order dates changes

Hi,
In MD04 Stock Requirements for two plants 0011 and 0012. Plant 0012 has a Stock Transport Purchase Order STO001/10 where it is buying from the sending plant of 0011 and an arrival date of 09/21/07. Plant 0011 has the demand side of the Stock Transport Purchase RelOrd saying it needs to Ship on 09/10/07(so it gets to plant 0012 by 9/21/07.
Next, I run transaction VL10B to create a delivery in plant 0011 so I can get ready to ship the goods.
Now, when I look at Stock Requirements in the shipping plant (0011) you will note that the delivery say the shipping date of 9/20/07. The delivery date changes to the date of the receiving plant Stock Transport Order i.e 9/20/07. In plant 0012 the PO will show date 9/21/07 because it has 1 day goods receipt time in the material master.
<b>The MRP element RelOrd date changes when the delivery is created before doing PGI why the date changes in MD04???</b>
Thanks,
Suresh

Suresh,
Please Refr OSS Note-25444.
This deals with the inconsistencies with MD04 & Actual Placed orders.
REWARD IF U FINDS THIS AS USEFUL...
Regds
MM

Difference between earliest master data and master data change bonus

Hi,
Can anyone tell me what is the exact difference between earliest master data change and master data change bonus? Whenver any infotype is changed, why are the dates updated in both the fields? Is it not enough if only Earliest master data change field is updated? I was thinking that Earliest master data change bonus field is updated when IT267 is created, but even if i change the time data both the fields are getting updated. Please advise?
Thanks

Hi,
Earliest master dat change date is date beyond which no master data change can be put in for employee in infotype.
It is used to restrict any master data entry beyond certain date as restriction for employees that client has set and is moreover controlled at control record level but ocassionally used at employee level whenever payment was hold for long time and so on.
Master data change bonus date is date which gets automatically filled in whenever there is any master data change.
This date cannot be past earliest master data change date and will throw error if tried for employee to input.
Thanks,
Ameet

MD01 rel order dates changes

Hi,
In MD04 Stock Requirements for two plants 0011 and 0012. Plant 0012 has a Stock Transport Purchase Order STO001/10 where it is buying from the sending plant of 0011 and an arrival date of 09/21/07. Plant 0011 has the demand side of the Stock Transport Purchase RelOrd saying it needs to Ship on 09/10/07(so it gets to plant 0012 by 9/21/07.
Next, I run transaction VL10B to create a delivery in plant 0011 so I can get ready to ship the goods.
Now, when I look at Stock Requirements in the shipping plant (0011) you will note that the delivery say the shipping date of 9/20/07. The delivery date changes to the date of the receiving plant Stock Transport Order i.e 9/20/07. In plant 0012 the PO will show date 9/21/07 because it has 1 day goods receipt time in the material master.
<b>The MRP element RelOrd date changes when the delivery is created before doing PGI why the date changes in MD04???</b>
Thanks,
Suresh

I found this thread, but unfortunatelly is not finished..
My scenario is the same as the described here.
req.date in receiving DistCenter = 20.11.20007
req.date in delivering Plant = 19.11.2007 (because of the PlndDelTime=1)
but when I create the delivery, the delivery date in the plant = 20.11.2007 instead of 19.11.2007.
What should I change to have the delivery date=19.11.2007
Best Regards
-Italo

Delivery Date changed to past date while ATPing 2nd Line

Similar Messages

Maybe you are looking for