Date selection from Calendar in Web Reporting

Hi All,
We are on BI 7.0 SP 15. When I run the web reports, I do not get a calendar pop-up for the date variables. I get the calendar in BEx Analyzer but not in the web reports? Have any of you encountered this issue and if so, what is the solution?
Help appreciated.
Regards,
Doniv

I think in 3.5 WAD system, this could be achieved using table interface.............Since 7.0 does not support Table Interface, this might be achieved using javascript .......code

Similar Messages

Query displaying from date & to date selected from calendar

Hello every1,
I just want to create a query which will display from date and to date which i need to select it from the calendar.
Can any1 help me out for it.

HELLO,
ACTUALLY I HAVE A FIELD CALLED DUE DATE IN MY UDT WHERE I HAVE ENETERED SOME MY DUE DATES. NOW WHEN IAM CREATING A QUERY FOR DUE DATE AS FOLLOW:
SELECT * FROM DBO.[@LC_OV_H] T0 WHERE T0.DUEDATE>='[%0]' AND T0.DUEDATE<='[%1]'
IT IS GIVEN ME A LIST OF THE DUE DATES WHICH I HAVE ENTERED BUT HERE I WANT A CALENDER TO BE DISPLAYED DURING SELECTION.........
Edited by: MEGHSHILPK on Jul 17, 2010 10:07 AM

Populate select list when a date selected from date picker in tabular form

Hi Guys,
I have a situation where user picks a date from a date picker in tabular form.
So as soon as he picks a date say 05/31/2011 from the date picker I want to populate a select list with 2 values : Tuesday AM , Tuesday PM.
I have gone through the forums a lot and figured we can write a Dynamic Action using JQuery Selector. But I am not sure how to figure out the day from a date picker.
I appreciate if some one can give your thoughts on how to proceed. It seems to be simple but looks like a tricky one. I am not familiar with writing Java Script.
Thanks ,
Raj

I was thinking your date selected from CALENDAR ended in a list_item.
I don't know I thinking that
well,
:master_block.itemdate is your text_item where calendar return date selected.
and then , following Gerd's step
Create a WHEN-MOUSE-DOUBLECLICK on the date-item of CALENDAR and write :
begin
:master_block.itemdate := calendar (.........);
go_block ('master-block');
execute_query;
end;
or set a global or parameter variable date selected from calendar :parameter. xxxxxx
in a PRE-QUERY
:master_block.itemdate := :parameter. xxxxxx
and
Create a WHEN-MOUSE-DOUBLECLICK on the date-item of CALENDAR and write :
begin
:parameter. xxxxxx := calendar( ....);
go_block ('master-block');
execute_query;
end;
regards

Excute_query when new date selected from calender

hi,
i have a mater detail form. form is displaying current day values as default.
i put a calendar to form for users can be select date.
now,
i want to excute_query when new date selected from calender.
i writed below code to text_item(calendar) when_validate_item trigger but it nor woring
.giving frm-40137 error.
code is;
:parameter.GUNLUK_TARIH := Name_In('PARAMATRELER.TARIH_SON');
SET_RECORD_PROPERTY(1,'XXMOB_YAPBOZ_TAHTASI_GV',STATUS,QUERY_STATUS);
go_block('XXMOB_YAPBOZ_TAHTASI_GV');
DO_KEY('Execute_query');
any help please
best regards
aykut

I was thinking your date selected from CALENDAR ended in a list_item.
I don't know I thinking that
well,
:master_block.itemdate is your text_item where calendar return date selected.
and then , following Gerd's step
Create a WHEN-MOUSE-DOUBLECLICK on the date-item of CALENDAR and write :
begin
:master_block.itemdate := calendar (.........);
go_block ('master-block');
execute_query;
end;
or set a global or parameter variable date selected from calendar :parameter. xxxxxx
in a PRE-QUERY
:master_block.itemdate := :parameter. xxxxxx
and
Create a WHEN-MOUSE-DOUBLECLICK on the date-item of CALENDAR and write :
begin
:parameter. xxxxxx := calendar( ....);
go_block ('master-block');
execute_query;
end;
regards

Is it possible to delete data selectively from Business content cubes

Dear Experts,
         Requesting you to help me out to know, is it possible to delete data selectively from Business content cubes.
When I'm trying to delete selectively from Business content cubes, the background job gets cancelled with ST22 logs stating
A RAISE statement in the program "SAPLRSDRD" raised the exception condition "X_MESSAGE".
Since the exception was not intercepted by a superior program, processing was terminated.
and i tried with few more Technical content cubes but the same thing happens.
Pls let me know how to selectively delete data from Business content cubes if it's possible?.
Thanks in advance for your favorable assistance.
Regards,
Ramesh-Kumar.

Hi Ramesh,
Follow below steps for selective deletion:
1.     Transaction code: Use the Transaction code DELETE_FACTS.
2.     Generate selective deletion program:
A report program will be generated of the given name, here .
3.     Selection screen:
Take the deletion program u201CZDEL_EPBGu201D to the transaction code SE38 to see/execute the program.
After executing it will take you to a selection screen:
As we need to carry out deletion selective on Calendar week, we need to get the screen field for the field Calendar week. For this, click on the Calendar week field and press F1.
Click on the technical information button (marked in red box above) you will get below screen:
     ABAP program to carry out the Calendar week calculation
Problem scenario: As stated earlier the requirement is to delete the data from the cube based on the calendar week. Thus a code must be developed such that the number of weeks should be taken as input and corresponding calendar week should be determined. This calendar week should be then passed to the deletion program in order to carry out the data deletion from the InfoCube.
     Transaction code: Use T-code SE38 in order to create a program.
Logic: Suppose we need to delete the data older than 100 weeks.
a.     Get the number of weeks and system date in variables and calculate the total number of days :
lv_week = 100.      *number of weeks
lv_dte = sy-datum.     *system date
v_totaldays = lv_week * 7.      *total days
b.     Get the corresponding calendar day from the total days. This is obtained by simply subtracting the total no. of days from the system date.
lv_calday = lv_dte - v_totaldays. *corresponding calday.
c.     Now in order to get the calendar week corresponding to the calculated calendar day we must call a function module 'DATE_TO_PERIOD_CONVERT'. This function module takes input as Calendar day and Fiscal year variant and returns the appropriate fiscal period.
Get the sales week time elements
call function 'DATE_TO_PERIOD_CONVERT'
    exporting
      i_date                      = lv_calday
      i_periv                     = lc_sales
    importing
      e_buper                     = lv_period
      e_gjahr                     = lv_year
    exceptions
      input_false                 = 1
      t009_notfound               = 2
      t009b_notfound              = 3.
if sy-subrc = 0.
    ls_time-calweek(4)      = lv_year.
    ls_time-calweek+4(2)    = lv_period.
endif.
v_week = ls_boots_time-calweek.
Note: We can pass the fiscal year variant which can be obtained from the table T009B.For e.g. here fiscal year variant lc_sales = Z2. LS_TIME will be any table with suitable time units.
d.     Now we have obtained the required calendar week in the v_week variable. This calendar week is the week till which we need to keep the data. And older data than this week will be deleted. This deletion will be done by the deletion program
Submitting the Data deletion program for ZEPBGC01 and key field
SUBMIT ZDEL_EPBG WITH C039 LT v_week.
          Here the calendar week value is submitted to the deletion program ZDEL_EPBG with the screen field of calendar week.
Hope ... this will help you..
Thanks,
Jitendra

Auto-populating the selection screen parameters for web report

hello
i am having a scenario where my web report is a link to another internet application (a BSP application) and it is called by clicking some link or button on the BSP page.
can i pass the selection values for BW Web report directly from BSP application through a query string or by setting some cookie values so that the user will directly view the report on click of that link?
Thanks in advance.
Regards
Rajeev

we can do this by adding a URL as the query-string with web template_id and with the selection screen parameters as key value pairs

Facing problem while Jumping to a R/3 transaction from a BW WEB report

Hi all,
we are trying to create a jump query from a BW web report to a transaction IQ09 in R/3. we are able to create a jump to other transactions like MIGO...but cudnt for IQ09.
Will there be any transaction specific settings that i have to make.
Please let us know how to solve this?
Regards,
Bob

So, when you do a jump, where does it take you to?
Are the required input fields for IQ09 supplied when you do a jump? Do you know if your id has authorization to view this Tcode in R3?

How to access complex data type from a soap web services?

hello
can u please tell me how can i access complex data type from a soap web service from jdeveloper 10g
Jdeveloper generates 3 classes
serviceStub
getproperties
response
i have to retreview the data which is a complex data type it gives some
unknown type. and the return value is a key-value pair data type .
regards
vs

After you create the partner link and the invoke (to create the variables), change the element type of the response message to the complex type definition of your collection that appears in the XSD. You can do the same thing if you want to change the element type of the payload of the request message as well.

Calling a BSP from a BW web report RRI

Hi,
I am calling a BSP from a BW Web Report to Report Interface and during the call all users have to authenticate themselves. It is not an option to turn authentication off for audit purposes but is there any way of performing automatic authentication?
Both the web report and BSP are on the same BW instance.
Any help would be greatly appreciated.
Regards
Paul.

Just activate SSO2 for your application servers. Some time ago there was a good <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/ com.sapportals.km.docs/documents/a1-8-4/SSO%20Overview.pdf">article</a> on this here on SDN. Keep in mind that browser must accept cookies.

Performance issue and data getting interchanged in BO Webi report + SAP BW

Hi,
We are using SAP BW queries as the source for creating some BO reports.
Environments :
SAP - SAP BI 7.1
BO - BO XI 3.1
Issues :
The reports were working fine in Dev and Q with less data. But when we point the universes to BW prod ( where we have much data), the reports are taking quite a long time to refresh and getting timed out. This query has some key figures which are having customer exits defined to show only one month data. And also BW accelerators are updated for the infocubes pertaining to this query. The BO report is giving data if we apply a filter in 'Query Panel' of Webi to show only current month dates. But then the issue is the values are getting interchanged for many objects. For ex: there are 2 objects- ABS version and Market region. The values are getting interchanged in the BO level.
Please let us know if anything needs to be done in BO or BW to fix this issue if anyone has faced the same
Also Please let us know if customer exits and accelerators works fine with BO
Thanks
Sivakami

Hi,
Thanks Roberto. We'll check the notes
@Ingo,
We are able to solve the performance issue by removing unused Key figures and dimensions from the query, but the column value interchange issue still persisits
The build version is - 12.3.0
Query Stripping
Where should we enable query stripping? When i went through some documentation it was written that it'll be enabled automatically from XI 3.1 Sp3. Can you please let us know if its so and what we need to do to enable it.
The coulmn interchange is happening when we use dimensions in a certain order. When product type is used along with Market region. Market region shows values of Product type also in Webi report.
Thanks & Regards,
Sivakami

Data Sources , Data Providers to a Single WebI Report

Hi Guru's ,
I am a newbie..!! I am going through the documents related to a creation of WebI Report and got to know that we can combine two or more data sources (or) two data providers(Queries) in creation of a single WebI Report . However,I am still confused with this incoming stuff for creating a WebI Report .
Could some one explain me what type of combinations can give as an input for creating a WebI report ?
For example, one can link two or more queries and create a single report by using merge dimension concept !! If so, Will WebI accept data coming from 2 different universes, data coming from 2 or more different data sources like SQL data and SAP ecc ?
Please explain this as I am new to this !!

Hi
Common in the sense relevant data in the two objects with same data type.
See chapter 24 in the attached pdf more on merge dimension and how it will work in webi.
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4sp4_ia_desktop_en.pdf

Sort variable values in selection box in BEx web report.

Hello friends,
In my BEx web report I have cal/month selection. When I do dropdown to select values it starts with 01/1960 and I have to click 10 times to get to 01/2006, 02/2006 and so forth.
Is there a way to sort these values so I can get most current cal/month in first list?
Thanks in advance.
Regards,
BJ

I would consider changing the read mode for the dropdown box. Are all of those dates actually relevant? Check out the properties of the dropdown box in WAD.
Thanks,
Jeff

SSRS Line graphs, change the axis maximum and minimum by month, and change data series from calendar year to financial year

I am using SSRS and I cannot access SQL server to answer my problem, so the solution needs to be done via SSRS only.
I am currently trying to graph some data. The problem is, the months on the X axis are aligned by calendar year. I need the first month to commence with July, with the last month on the axis to be June. This also means that the year series need to be changed
from calendar year to Australian financial year.
Screenshots are provided in the comments.

Hi Northern,
Per my understanding that you want to show the month in the x axis as the order of the financial year(7,8,9,10...4,5,6) and also display the year in the series group as the financial year, right?
I have tested on my local environment and we can modify the query in the sql to get the financial year value based on the fields of Calendar year, details information below for your reference:
1. Modify the query as below:
SELECT
Calendar_Date,CASE WHEN MONTH(Calendar_Date)>=7 THEN
YEAR(Calendar_Date)+1
ELSE YEAR(Calendar_Date) END AS Financial_Year,
MONTH(Calendar_Date)as Financial_Month,
Billing_Amount
FROM TableName
order BY
Calendar_Date
2. Add the "Billing_Aomount" in the Value area, "Financial_Month" in the Category group area and "Financial_Year" in the Series group area.
3. Right click the "Financial_Month" under the Category group to select the "Category group properties",click the sorting and add below expression in the Sort by to specify the order for the month in the x-axis:
=switch(Fields!Financial_Month.Value="7",1,Fields!Financial_Month.Value="8",2,
Fields!Financial_Month.Value="9",3,Fields!Financial_Month.Value="10",4,
Fields!Financial_Month.Value="11",5,Fields!Financial_Month.Value="12",6,
Fields!Financial_Month.Value="1",7,Fields!Financial_Month.Value="2",8,
Fields!Financial_Month.Value="3",9,Fields!Financial_Month.Value="4",10,
Fields!Financial_Month.Value="5",11,Fields!Financial_Month.Value="6",12)
4. Preview you will get the sample chart display as below according to my sample data:
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Problem in Data Extracting from BEx to Webi

Hi guys..this is sathish, we have a problem in webi reports.Actually we created webi reports from using BEx,the problem is the data in bex is showing correct data but in webi reports some cells are not showing the exact data which is showing the in the BEx.
How to resolve the problem.please help me.

BOXIR3.1 we are using..actually webi reports are prepared 3 months before.now the problem is in that particular report some fields are showing wrong information like Ex: in Bex it showing 1200545 but in webi report it showing like 346432.it is showing like that in 3 to 4 fields only remaining fields are correct. we tried to create new report but it showing correct information.but that particular report itself showing wrong information.
Thanks for your reply Stratos
Sathish
Edited by: M.V.Sathish on Mar 27, 2011 1:26 PM

Dynamic data select from table is giving dump

Hello Experts,
   Below statement is giving Dump after it move all the data in my dynamic table.
When i see in debug. All my recored are avilable in <T_TAB> Table.
SELECT * FROM (pa_tab) INTO CORRESPONDING FIELDS OF TABLE <T_TAB>.
> IF SY-SUBRC = 0.
Information on where terminated
The termination occurred in the ABAP program "ZFIR_ZTABLE_UPLOAD" in
"F_DOWNLOAD".
The main program was "ZFIR_ZTABLE_UPLOAD ".
The termination occurred in line 403 of the source code of the (Include)
program "ZFIR_ZTABLE_UPLOAD"
of the source code of program "ZFIR_ZTABLE_UPLOAD" (when calling the editor
4030).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "F_DOWNLOAD" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "ZFIR_ZTABLE_UPLOAD ". Its source code starts
in line 399
of the (Include) program "ZFIR_ZTABLE_UPLOAD ".
please help me.
Regards,
Amit
Message was edited by:
        Amit Gupta

Hi Amit,
Check if you are doing the following in your program
FIELD-SYMBOLS <T_TAB> TYPE STANDARD TABLE.
DATA: g_tabref type ref to data.   "Reference to your table structure
CREATE DATA g_tabref type standard table of (pa_tab).
ASSIGN g_tabref->* to <T_TAB>.
SELECT * FROM (PA_TAB) INTO TABLE <T_TAB>.
Hope this solves your problem.
Let me know if you require any further info.
Enjoy SAP. Reward points of useful
Rajasekhar

Date selection from Calendar in Web Reporting

Similar Messages

Maybe you are looking for