Card reader not reading

I have a Mid 2010 Macbook Pro. My SD card reader is not reading the SD card from my camara.
Please help!

Buy an external card reader that connect by USB. The one inside your Mac has failed and the only way to fix it is to replace the logic board.

Similar Messages

My sim card will not read on my new iphone 6 why?

please help my sim card will not read on my iphone 6 and i cant pass the welcome screen

have you tried removing it and re-inserting while the phone is switched on?

SD card driver not reading

My Sony vaio is not reading my SD card from my camera. I installed the software updates and it didn't do anything. I checked under devices and drivers and it says the software is working.. but it's not. The SD drive has worked before, so I don't understand why it stopped. Any suggestions? Thanks.

Hi anasellares
Thank you for considering Sony Community!
Reformatting the computer will just reinstall the Operating System back to its original factory settings. It will reload all pre-installed applications and drivers. All third-party applications you installed will be deleted. And all software issue should be resolved. You have the option to do this right away but creating a backup is a must. The links above are combination of U.S support and non-U.S. support links. To isolate the issue, kindly try these steps:
Power Cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds
Reset BIOS.
The drivers and software that support your computer are on this link: VPCSE13FX
Take note of the card that your unit can accommodate:
❑ "Memory Stick Duo"
❑ "Memory Stick PRO Duo"
❑ "Memory Stick PRO-HG Duo"
Just in case you are decided to format the unit, please follow the steps here: System Recovery from outside of Windows. (Steps 1,2,9, skip rescue, 16).
For further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
Hope these options help.
Regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

My sim card will not read in my new3 iphone 6 why?

i have put a the sim card that comes with the new phone into my iphone 6 but its not reading it and i can not get passed the set up page

have you tried removing it and re-inserting while the phone is switched on?

JAWS Screen Reader Not Reading

I am in the process of developing a online flash module for a client and have been having some problems with the screen reader actually reading the text on the screen. The text is in a classic dynamic text field. The field is covered by a number of layers of text and graphics and is not in a movie clip. Accessibility properties for the field have been enabled. Accessibility active returns true but nothing is being read. Is there something else that needs to be done? Any assistance that could be offered would be very much appreciated.

Hi,
i am not sure whether the below mentioned Blog contains your scenario but you can have a look:
Previewing SRM MDM Catalog 2.0
Siddharth

JAWS reader not reading Project Description in Captivate 7

Hi, all--
I've created a short Captivate 7 movie (htm/swf) that I am testing in JAWS 13. While JAWS reads the Project Title (which ends up as the <title> tag text in the HTML - that's what JAWS reads), it is not reading the Project Description. I would very much like for the user to be able to access the project description before deciding whether or not to run the movie.
A few details:
I have Enable Accessibility checked.
I have Auto Play unchecked.
Published as SWF, Flash 10. Tried Flash 11 as well but no change.
I am running in IE 8 with Flash Player 11.
Some observations:
JAWS is reading the individual slide descriptions, as well as captions and buttons. All of that is working as expected.
I have removed the slide description on the first slide in case that conflicts with the project description. No change.
Am I missing something?
Thanks in advance!
Ann

Hi, Haridoss--
Yes, that is exactly the field that I filled in and expected JAWS to read, but I am finding, as you stated, that it will not.
Very disappointing since the Adobe accessibility web site recommends filling in the movie description:
Provide descriptions for movies and slides
Adobe Captivate allows you to easily provide text descriptions for your simulations. These descriptions provide details about the movie or slide to users of screen readers and other assistive technology.
Adding a description to an Adobe Captivate movie
Every movie created in Adobe Captivate should include a movie description. For demonstrations that are short or that rely heavily on the mouse and are thus irrelevant to screen reader users, the movie description alone will suffice. Longer movies should provide a description including a content overview and context for the user, along with individual slide descriptions where necessary. (The steps then describe how to add a movie description Edit -> Preferences -> Project -> Info -> Description.)
I'll just have to edit the published HTML and add my own description.
Thanks

IPad SD card reader not reading JPGS from Canon 5dIII

Have a brand new iPad (retina) and the SD to lighting connector.
When I insert a Lexar Professional 16GB 400x SD card with images from my Canon 5DIII, iPad opens the Photo app and I can see the thumbnails, however when I try to import, instead of a green icon with a check mark, I get a red one with an exclamation point (an error). The photos are not imported.
I used the same SD card in my Canon G12 and images from that camera import just fine. When I reduce the resolution on the 5DIII, the images import fine.
I have read there is a 32GB limit on the size of teh SD card, but I suppose there must also be a limit on individual file sizes as well. If so, I cannot find it documented.
Does anyone know if this is the case?

In the past I've copied MP4 films via an SD card with the kit and been able to play them, but a film bought from iTunes didn't play (you can't copy content to the Videos app via the kit, only to the Photos app). Also the kit only recognises content that is in a particular format - the card has to have a DCIM directory off its root, with the photos/videos underneath it with filenames exactly 8 characters long (no spaces) plus file extension.

Sd card slot not reading card

I have a Pavilion dv5 1235dx running with Windows Vista. My sd car slot doesn't read the memory card anymore and if I explore to find the file myself it is not there. But I know that the card is fine because other computers read it. It worked in the past but has stopped working recently. What should I do?

, Hello and thanks for posting on the HP support forums. Here is a lint that should help you with the sd card reader issue. HP Notebook PCs - Using and Troubleshooting Memory Card Readers (Windows 7 and Vista) Please let me know how this goes. Thanks again for posting and have a great day.

SD reader not reading my SD card

I have a Toshiba Satellite p875-s7200 running windows 7 home premium x64. It has a built in SD slot and when i put my SD card in nothing happens. I looked in my computer and nothing is there. I looked in device manager and nothing is there either. I have tried different SD cards and none has worked. It says in the manual that this latop does support SDHC cards. SD cards has worked in it before. I tried the same SD cards in an older laptop and they have worked.

The gold standard for determining whether or not a problem is being caused by software is to perform a system recovery, which reverts to the original factory software installation.
The knowledge base article at http://forums.toshiba.com/t5/System-Recovery-and-Recovery/How-To-Understanding-System-Recovery-Options-Creating-or/ta-p/268269 has all the details about how to do that.
Jim

Media card reader not reading in usb port

Usb problems? or is something set wrong? any thoughts?

Did you ever get your issue resolved? I'm having the same problem using a Targus card reader. I have used it for over a year. It has worked perfectly until the last few weeks. Today, we purchased another card reader. Iphoto still will not recognize it.

SD Card reader not reading SD Cards

Hey there, its me again. Yesterday I tried the card reader that is built into the laptop yesterday, and to my disappointment, it simply didn't work. I push the card in, and after I hear the click, it sits in the slot how it is supposed to. The light comes on for about a second, then shuts off right away. I've tried in Windows 7 64 bit and Windows xp 64 bit, and neither one responded despite having the right drivers and everything.
Any ideas, or was this just poor design, like the rest of the machine?
- 2 Bunny/Dr Robinson
Solved!
Go to Solution.

http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7kss73ww.exe
if the first one doesn't work, try beta drivers below :
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7kss55ww.zip

Energy Reader not reading

My energy reader stopped getting readings about a month ago and I have not been able to get it back. I a little nervous about troubleshooting something that is in my electrical box. Suggestions?
Solved!
Go to Solution.

If you had the reader installed professionally, then I would call the installer to have them check on their work. Prior to that you should check to see that the reader is plugged into a working outlet and that it is showing as working in the system.

Memmory card not reading through USB cable while ...

Hi,am using Xpressmusic 5130.When i connect it to PC using USB cabe and selecting Data Storage option,it is showing 'Memmory card in use by another application,Please wait'.And i didnt find any appln using memmory card at that time.Bui i could trnsfer mp3's and images using 'printig and media ' option.I'm currently using a 1gb memmory card and its about 800mb now.
Anybody please reply..What should i do?

am also haivg the same as early mentioned by miss suja, that the memmory card is not reading while connecting through usb, says that memmory card is in use by another application , i selected memmory card,just after connecting via usb, all in vain, i couldn't explore my nokia 5130 via USB, plz tell whats the corrective measure??????????also i want to know the expandable memmory of nokia 5130, some sites says 8gb, some others 16 gb, some others 2 gb, which one should i trust?????many of the depicts that 16 gb has been verified!!!!!!! making v people in dilemma.....expecting your valuable reply

Memory card reader not working

Compaq Presaro CQ3000 Series Model CQ3420AN Memory card reader not reading any SD cards.
Where can I find download for original driver.
This question was solved.
View Solution.

http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/Memory-Card-Reader-not-uploading/m-p/1265779...
Here's a page that might help you resolve your problem if you haven't assigned a drive letter for your portable card readers.

My current version adobe reader is not reading pdf's on my mac

Why would my adobe reader not "read" my pdf's on my mac? It just stopped a couple of days ago. It works on my PC, and on adobe online, so it's not the documents.

I actually deleted my app and downloaded it again today. So the recent
version whatever it is. I have iMac Lion 10.7.5? (on Lenovo laptop now).
early 2011 model without airplay mirroring so didn't update to Mountain
Lion and I heard recent free Maverick update has bugs so didn't update to
that either.
On Fri, Apr 25, 2014 at 10:06 AM, Gilad D (try67)

Card reader not reading

Similar Messages

Maybe you are looking for