Dateformat 10006060*24

Good Day:
As far as I know the date calculation in other languages, it should be 60*60*24 but what I got from a Java code is 1000*60*60*24. Anyone can tell me where is the 1000 come from?
if to be precise:
d.setTime((1000*60*60*24) + d.getTime());
why?
thanks

Many languages use seconds since the epoch, Java uses milliseconds.

Similar Messages

Mid 2010 Macbook Pro +1000 Euro repair costs (no external marks)

Hello together,
I am looking out for some advise. My mid 2010 Macbook Pro 15inch with an anti glare display just got a new logic board. I paid more than 500 Euro at a Premium Reseller called mStore in Kiel (Germany) to replace it, because the display stayed black after booting. My Macbook didn't even have a single external mark or scratch on the housing. I accepted it and said to myself if it is working again, it is alright. But less than two month later a vertical line is drawing from the top frame to the bottom (see photo). The line is narrow, it is just one pixel, but it is really annoying because it is always in sight. I went to the same reseller and asked what to do, they recommend a second repair attempt for again 500 Euro. In less then two month I cannot afford +1000 Euro for a laptop with an actual value of about 1100 Euro.
What is the best thing to do now?
I am really disappointed by Apple's quality. I am 24 years old and everybody in my family is using Apple computers since I can think back. The first time I could call a Mac my own was when I was 13.
When I graduated from school I was 19 and worked in a hospital to finance a new iBook G4. I had this one for about four years and it has been traveling with me through New Zealand and Asia for more than a year. I never had any issue with it, even when I dropped it from the top bank in a dormitory. It is still alive and working fine.
When I started studying the time came to buy an Intel Mac (15'' Macbook Pro, anti glare) and again I was very happy with the quality. I have also been a huge advocate for Apple products and was confidently suggesting them to friends and family. But today I feel disappointed by the brand.
Best
Marco

I had the same problem on a display MBP 15" in 2010, and it is a display problem recognised by Apple.
It was covered by the warranty.
If you do nothing, the number of vertical pixel lines will increase over time.
Good that Apple helped you out of this problem.

Help - I need more than 1000 Notes of 4000 characters

The 4000 character limitation of Notes and the limitation of 1000 Notes and the length of time it takes to load in Notes make using iPod notes very limiting. I've experimented with a few other options which I explain below, BUT MY QUESTION IS does anyone have any other suggestions on how to work around the 4000 character limitation?
Here is what I have found to be alternative options:
Split your notes into 4000 character blocks using the split command (open Terminal and type "man split" to read about the command)
Install Linux on the iPod. This worked with my older iPod but there isn't a Linux for the newer iPod yet.
Using Contacts "note"
Summary: Uses a manually created Contacts file to store text of up to 243,185 characters in length. If creating files manually requires special formatting for linebreaks. Compatible with music playback and iTunes sync.
Contacts are stored on the iPod according to the vCard standard. vCard stores contact entries in vcf files. A single vcf file can contain any number of vCard entries. The iPod firmware looks for the vcf files in the iPod Contacts folder. The Contacts folder can contain any number of vcf files and will load all of them into memory when viewing contacts.
Contacts synchronized with iTunes are stored in the iSync.vcf file.
You can paste your text content into an Address Book entry and sync it to the iPod via iTunes. There may be limits in the Address Book application regarding the amount of text it will allow.
Using any text editor you can create your own vcf files and place them into the Contacts folder as well. Using the org and note attributes in the vCard entry in a vcf file you can create a contact that can display up to 243185 characters of text. A sample vcf file with a single vCard entry would look like this:
begin:vcard
version:3.0
org:Sample Note
note:You can use Contact notes to get around the 4k limitation of iPod notes. Doing so requires some changes in the syntax of the text however because the vCard format is fairly restrictive.\nFor one thing any line breaks must be converted to a backslash followed by lower case n.\nFor another many symbolic characters must be escaped by preceding them with a backslash.
end:vcard
The "org" attribute names the contact, and the "note" attribute contains the text, up to 243,185 characters of text. While a vCard entry can only have a single note attribute, you can have any number of vCard entries in a single vcf file.
One requirement of this approach is that the text must be edited to a format compatible with the vCard standard. That means that all linebreaks in the text must be converted to a backslash "\" followed by "n", and any symbolic characters should be preceded with backslash.
The negatives of this approach are that linebreaks must be altered and the notes are mixed in with your contacts. But to the positive they are still viewable while music is playing, and they are left alone by the iTunes synchronization process.
This method does not interfere with listening to a song. This method is independent of synchronizing with iTunes.
Using the Calendar "description"
Summary: Uses a manually created Calendar file or Calendar entries in iCal to store text of up to 20,600 characters in length per calendar event. If creating files manually requires special formatting for linebreaks. Compatible with music playback. NOT compatible with iTunes sync if using a manually created file.
The iPod supports the vCal standard for displaying calendar information. Version 1.0 of this standard uses vcs files; and version 2.0 of this standard uses ics files. Most calendar programs can export either vcs or ics files and there is plenty of information available online for how to convert data from a calendar application into one of these formats.
The iPod firmware will display the contents of vcs and ics fles that are located in the iPod Calendars folder.
Calendar events defined in the vCal standard have a description attribute. The iPod firmware displays the description attribute when displaying the calendar event. It is possible to create a calendar specifically for the purpose of storing text in description attributes. You could create a calendar in a calendar program such as iCal and sync it with the iPod via iTunes, or you could create your own calendar file manually. Unfortunately if you sync calendars using iTunes then iTunes will delete all files in the Calendars folder that it does not directly control, so maintaining any kind of external calendar file is not compatible with syncing calendars using iTunes.
The iPod can read both vcs and ics calendar files, but for creating your own you should use vcs because vcs doesn't have a line length limit while ics does and requires special line-wrapping. The iPod will display only the first 20600 characters of the event description.
A simple vcs file with a single fake event would look like this:
BEGIN:VCALENDAR
VERSION:1.0
X-WR-CALNAME:Notes Calendar
BEGIN:VEVENT
DTSTART:20070201T220000Z
DTEND:20070201T230000Z
SUMMARY:Sample note
DESCRIPTION;ENCODING=QUOTED-PRINTABLE:=0D=0ALine breaks need to be converted to an equal sign followed by 0D followed by another equals sign followed by 0A. There is no line length limit, so the text can be as long as you need. There may be a reasonable limit imposed by the iPod calendar interface due to scrolling.
END:VEVENT
END:VCALENDAR
Each Calendar in the file is demarcated by the BEGIN:VCALENDAR and END:VCALENDAR statements. The VERSION statement when set to 1.0 indicates a vcs file (2.0 should be used in an ics file). The X-WR-CALNAME statement can be used to indicate a name for the calendar. If no calendar name is specified the iPod uses "Other".
Each Calendar event is demarcated by the BEGIN:VEVENT and END:VEVENT statements. Each event requires start and end times (DTSTART and DTEND, respectively), a SUMMARY which is the event title, and the DESCRIPTION which is the text you wish to read. Linebreaks in the description text must be converted to "=0D=0A".
The negatives of this approach are that linebreaks must be altered and the notes are attached to specific dates in the calendar so to find them you would need to navigate to those dates. Of course you could put all notes on the same date, or use different dates or even different calendars (within the same vcs file or not) to organize them.
This method does not interfere with listening to a song. This method is NOT compatible with syncing Calendars with iTunes if you are using a manually created file.
Using Music Lyrics
Summary: Uses the Lyrics section of fake songs to store text of up to 10,000 characters in length per song. Does not require special formatting of text. Incompatible with music playback. Requires the text to be stored in iTunes.
iTunes allows the lyrics of a song to be attached to the ID3 tags of the song and viewed on the iPod while the song is playing. Technically lyrics can be up to 256 MB in length, but the iPod will only display the first 10000 characters.
Using lyrics allows notes to be sorted into playlists just as songs are which could be helpful for organizing them. To attach lyrics though there must be a song as well. It is possible to create a very small MP3 that can be used just to attach lyrics to. The process for doing so is described in forum message 2331260, but the short story is:
- In the iTunes main library window, select a track you want to chop up, and select "Get info". The track cannot be a protected AAC track such as those purchased from the Apple Music Store.
- Go to the "Options" tab. Set "Start Time" and "Stop Time", corresponding to the start and finish of the chunk of song you want to chop out. Click "OK".
- Right-click on the track again in the main library window and select "Convert selection to XXX". (The XXX will be whatever file format you happen to have set in your iTunes Importing preferences at the time.)
- After a little while, iTunes will spit out a second, smaller copy of the track, containing just the music between the Start and Stop times you set in the original track. Rename the new track as you please. You can then use iTunes to paste the lyrics to this song clip.
The negatives of this approach are that it requires synchronization with iTunes, requires storage of the text on your computer as well as your iPod, requires the creation of fake songs in your Library, and cannot be used while a song is playing (unless the song you are listening to is the song that has the text you want to read in its lyrics).
Advantages are that this method does not require any editing of the text regarding linebreaks, and this method allows playlists to be used to organize the notes.
While all of these methods work, none of them are completely ideal. If Contacts could be stored in hierarchical folders then that method would be pretty good.
Are there any other alternatives that people have found to work well to work around this iPod limitation of 1000 max notes of 4000 max characters?
Regards,
Brendan

The iPod shuffle is a music player. The iPods with screens have always been more than that. If the iPod didn't have a calendar, contacts, and notes I wouldn't have considered buying one. Music playing is nice, but I certainly didn't want to carry around multiple devices needlessly. The iPod and a simple cell phone are enough. When the iPhone comes out maybe I'll be down to one device.
As for the Palm, having been a Newton user at the time I was never impressed with anything about Palm except its size. The same people who bought cheap PC's instead of Macs bought cheap Palms instead of Newtons. Quantity rather than quality won out.
Apple learned from that and made the iPod a good size to begin with, otherwise it might have suffered a similar fate.
The only PDA capability the iPod lacks is the ability to edit its content independently of the computer. That would be handy, but it turns out hasn't been a critical need for me. More often than not I need to look something up not change something while away from my office. There is a good side to this though, if I lost the iPod I would not have to worry a bit about losing any Contacts, Calendar events, or Music. Notes though, well that is a different matter, those I backup.
I guess one person's music player is another person's PDA.
Regards

How to delete the loadings list in the itunes store (1000 tunes are downloading with no reason)

Hi
I switched from an iPhone 4 to an iPhone 5c and now the itunes store app wants to download 1000 tunes (I guess it cannot try more) and it blocks.
I don't know how to delete the list (not one by one of course .
If someone has any clue to help
Thanks

Hi Francis,
Check the BADI "TRIP_WEB_CHECK" method "USER_CHECK_GENERAL_DATA".
Here based on the schema you can modify the "estimated cost" field.
Hope it helps.
Regards,
Jyothi

1000s of photos randomly sorted into 1000s of folders. Any ideas for getting them out without opening each one??

Somehow, very much unintentionally (it might have something to do with a 2 yr old "typing" on the keyboard while I wasn't looking), 1000s of my photos have been placed into separate folders, 2 or 3 random photos or videos in each folder. I have started opening each folder and moving the photos out, but with almost 1600 folders to go, I need to know if some else has ever encountered this issue, and if so, did you find a quicker way to get the photos out of the folders without having to manually open each one?
For the record, I now have my computer set to lock my screen when I leave my desk, lesson learned.

I am using an iMac with iOS 7.0.4. All of the photos were on iPhoto '11 after I updated to 9.4.3, and Aperture 3.4.5, but a few months ago they all disappeared from the iPhoto and Aperture libraries, Events, Photos and Faces sections. A few weeks later, I noticed a bunch of new folders on my external hard drive with the same title in a serial list of numbers, had somehow been created. Since I still had the pictures backed up on an external hard drive, I didn't worry about it too much at the time, but today I needed to find a picture from years ago and that brought up the need to fix the mess. In opening the 200 or so files that I have already opened, I noticed that they all listed in their details that they had been modified on 7/27/2013, from 12:07 am to 12:33 am (I guess it wasn't the 2 yr old's fault after all, because she would have been sleeping, sorry kiddo). The peculiar thing is that there is no rhyme or reason to the way the photos and videos were put in the folders. Some folders have only photos from a broad range of time, some have photos and videos, but none of them are sequential in time within the folder. When I transfer the photos and videos out of the folders, into the main overall picture folder, some of them are already in the main folder and some of them are not, meaning that I can't just take for granted that they are all copies, and delete all of the folders with that certain name.
Since I have now cleared my child of being the culprit for all of this mess, I'm thinking it must have been caused by a computer glitch or an update, as Terence suggested, especially considering the time of night when the changes took place. All that is listed in the software update section of my System Preferences area is an update to the AirPort Utility to version 6.3 on 7/26/23 at 12:23 pm. iPhoto had updadated to 9.4.3 on 4/27/13, but none of the files showed modifications on any date other than 7/27/13. Aperture had also updated to version 3.4.5, but it had updated days earlier on 7/11/13. Nothing had updated since 7/11/13 until AirPort Utility updated on 7/26/23, and nothing updated after that until 9/12/13.

Call RFC Function Module and return 1000 records at a time

I would like to call a Remote Enabled Function Module from a non SAP system. This function module will select data from the database and return it to the calling program.
Suppose there are 100,000 records that need to be returned, but the calling module would like the data in chunks of 1000 records. Therefore the calling program would call the FM 100 times.
How do I code the function module to know on each subsequent call to grab the next chunk of 1000 records?
Let me know if additional information is needed.
Thanks,
Aaron

Hello,
Here is how you can go for this issue:
1. Create one RFC function module with following parameter. These parameters are with respective of chunking logic.
     Import: Package Size
     Export: Total number of records
     Changing: chunk count
Implement following logic:
1. First of you need to know how many chunks you need to fetch for that get the count of total number of records. This is one
    time activity so you better maintain one flag import parameter will be set to 'X' only first call.
2. Get the number of chunk using total number of records / chunk size for e.g. 1000 / 100 so chunk count = 10.
3. Define internal chunk counter in function module which will be used to locate the correct chunk depending on the chunk
    counter value sent from calling program.
4. Send first call with package size 100 and chunk count = 1, execute select statement and increment internal
    chunk count check if chunk count = internal chunk count in current case chunk count = 1 so exit select statement and return
    with first chunk.
5. Send second call with package size 100 and chunk count = 2. Execute select statement and check chunk count with internal
    chunk counter, in current case it will be 1 so skip that data and go for next chunk of 100 records increment internal chunk
    counter. In this case it will match with external chunk count = 2. load output table with that data and return to calling program.
6. Repeat step 4 until you reach last chunk.
You need to use SELECT...ENDSELECT with PACKAGE SIZE addition so for every loop it will return number of records mentioned in package size.
Hope this helps.
Thanks,
Augustin.

I'm trying to install an HP LaserJet 1000 series printer so all systems on my network can access it.

Topography: All systems are Windows XP. Wireless network. Printer is physically attached to one of the XP systems, and printing from that system works as expected. Trying to add this printer via the "Add Printer" fails.
In "Add Printer", selecting "A Network Printer, or a printer attached to another computer"; press "Next"
On "Next" panel, selected "Browse for a printer", press "next"
On "Next panel", this printer I am looking for "\\host\printername" appears (along with other printers attached to other hosts"; press "Next"
On "Next panel", get popup "You are about to connect to a printer on host, which will automatically installa print driver on your machine. Printer drivers may contain viruses or scripts that can be harmful to your computer. It is important to be certain that the computer sharing this printer is trustworthy. Would you like to continue?"
Select "yes". Get a popup "The server for the "hp Laser Jet 1000" printer does not have the correct printer driver installed. If you want to search for the proper driver, click OK. Otherwise, click Cancel and contact your network administrator (that's me) or original equipment manufacturer for the correct printer driver."
Select "OK". Get a popup box titled "File needed: printer driver INF for hp LaserJet 1000" Box has input for typing the path where the file is located."
And ... I'm stuck. :-( I have no idea what it's looking for, or where it should be found.
The printer itself was a hand-me-down, so it's not like there's any real $$ involved in this; and I could always instll the printer directly on the system that will be using it most, but I'd really like to have it on my network. Did not receive any original CDs or publications. The installation file that I used, which I presume installed the driver was down loaded from this site, filename "lj1000hostbased-en-exe"
Any good advice on how to get this printer (it's a VERY nice printer, by the way ... prints wonderfully from the host it's actually attached to) onto my network for remote printing?
Thanks, in advance!
Update w/ additional possibly useful information: The HP Print and Scan Doctor does NOT see this printer at all. however the add printer dialog does. I don't know if that's useful or not, but it is what it is.
Thanks in advance again!
Phil

Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Best way to install free iTunes Apps in an enterprise across 1000 iPhones

We currently are looking at rolling out over 1000 iPhones (and iPads) in the next few months and we were wondering what is the best (and most legal) way we can install a bunch of free iTunes Apps on these devices as part of thier configuration before we hand them to the end users. We were currently thinking of creating a generic iTunes account and installing the Apps using this account on all the devices and then "logging off" this iTunes account from the device so the end users can use thier own when they get the device.
Is there anything wrong (or illegal) about this approach or is there a better way to do this?

Yes, this is very much the chicken-and-egg problem of Mobile Device Management for iOS devices. Let's hope it gets easier in the future.
One approach to deploying the app is self-service using Web Clips.
Use iPhone Configuration Utility or MobileIron to create a Config Profile containing a Web Clip labeled "Install Me!" that points at the App Store URL for the app you need installing.
The user taps "Install Me!" and iOS Safari will redirect to the App Store app, where the app for downloading is displayed. The user installs it manually.
Not pretty, but a little easier than following a written long script. And not very scalable as you need 1 web clip per App Store URL.
Alternatives are, use the web clip to direct the user to an intranet web page with a list of App Store URLs for all the apps you need them to install, or use the MobileIron's "Suggested Apps" feature as previously mentioned.
Deploying paid apps is particularly tricky for large deployments. However, there are some tricks: like using the App Store "Gift This App" feature to purchase the app and "gift" it to an end users. Alternatively, purchase iTunes gift cards from apple to value of the Apps you need them to install, and let them manage the purchase and installation themselves.
Again, I hope this gets streamlined in the future, but for now, it's the best we can do.
Regards,
Paul Adams

Can columns be more than 1000 in a select query (oracle 11 g)

I am getting this error: "ORA-01792: maximum number of columns in a table or view is 1000"
I have a dynamic query where number of column can increase according to the user input.
They can expect more than 1000 columns. Is it possible to fetch more than 1000 rows in a query?
I appreciate all your help.
Edited by: user10232912 on Apr 26, 2012 2:07 AM

>
They can expect more than 1000 columns.
Then they are idiots. IMO.
Open challenge. Show me an entity with a 1000 attributes and I will show you a flawed data
model and a total lack of grasping fundamentals of implementing that into a relation database product like Oracle.I second that - as someone who once had to ETL a system which had a table with 35.000 fields - that's 35K.
It was a system which made extensive use of arrays - and arrays of arrays of arrays...
Paul...

SCCM 2012 R2 site server client installation error: The client version 5.00.7958.1000 does not match the MP version 5.00.7804.1000.

Hello,
When I try to install the client on the site server itself it gives me this error message and fails the ccmsetup. I only have this on the site server. Clients to other servers and computers are pushed fine. If I check the version of the MP it says 5.00.7958.1000
in ADSI. I removed the MP object in CN=System, CN=System Management. Waited for it to be regenerated automatically by SCCM but the installation doesn't work still.
I tried to install with several methods including directly from ccmsetup.exe in ccmsetup folder, pushing by sccm itself, running from commandline, ...
I run SCCM 2012 R2 on Windows Server 2008 R2 and the database on SQL 2008 on Server 2008 R2
Below you find the ccmsetup.log:
<![LOG[==========[ ccmsetup started in process 5072 ]==========]LOG]!><time="07:29:25.392-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="07:29:25.393-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="util.cpp:1837">
<![LOG[Updated security on object C:\Windows\ccmsetup\cache\.]LOG]!><time="07:29:25.394-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="7532" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="07:29:25.394-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="07:29:25.395-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="07:29:25.397-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:3365">
<![LOG[Running on 'Microsoft Windows Server 2008 R2 Enterprise ' (6.1.7601). Service Pack (1.0). SuiteMask = 274. Product Type = 18]LOG]!><time="07:29:25.490-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="07:29:25.491-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="07:29:25.491-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="07:29:25.491-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="07:29:25.499-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE: 224]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8668">
<![LOG[FSP: SCCMSRV-02]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT: 1]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8778">
<![LOG[Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="07:29:25.513-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4539">
<![LOG[Retry time: 10 minute(s)]LOG]!><time="07:29:25.513-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4540">
<![LOG[MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log]LOG]!><time="07:29:25.513-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4541">
<![LOG[MSI properties: INSTALL="ALL" SMSSITECODE="ZAV" FSP="SCCMSRV-02" DISABLESITEOPT="TRUE" SMSCACHEDIR="CACHE" SMSCACHEFLAGS="MAXDRIVE" SMSCACHESIZE="20000" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4550">
<![LOG[ \\SCCMSRV-02.snba.be\SMSClient]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4557">
<![LOG[ \\SCCMSRV-02.SNBA.BE\SMSClient]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4566">
<![LOG[MPs:]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4569">
<![LOG[ SCCMSRV-02.snba.be]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4584">
<![LOG[No version of the client is currently detected.]LOG]!><time="07:29:25.520-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2748">
<![LOG[Task 'Configuration Manager Client Retry Task' does not exist]LOG]!><time="07:29:25.525-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="wintask.cpp:634">
<![LOG[Updated security on object C:\Windows\ccmsetup\.]LOG]!><time="07:29:25.529-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:9281">
<![LOG[Sending Fallback Status Point message to 'SCCMSRV-02', STATEID='100'.]LOG]!><time="07:29:25.530-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:9756">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x80041010]LOG]!><time="07:29:25.534-120" date="04-17-2014" component="ccmsetup" context="" type="2" thread="2724" file="ccmsetup.cpp:9838">
<![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="07:29:25.535-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:9887">
<![LOG[State message with TopicType 800 and TopicId {C6441082-A993-4410-9F89-D4CCB6624ED0} has been sent to the FSP]LOG]!><time="07:29:25.676-120" date="04-17-2014" component="FSPStateMessage" context="" type="1" thread="2724" file="fsputillib.cpp:752">
<![LOG[Running as user "SYSTEM"]LOG]!><time="07:29:25.693-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1995">
<![LOG[Detected 20167 MB free disk space on system drive.]LOG]!><time="07:29:25.693-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="util.cpp:628">
<![LOG[Checking Write Filter Status.]LOG]!><time="07:29:25.694-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2024">
<![LOG[This is not a supported write filter device. We are not in a write filter maintenance mode.]LOG]!><time="07:29:25.694-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2051">
<![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=ZAV))']LOG]!><time="07:29:25.716-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="lsad.cpp:656">
<![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>ZAV</RootSiteCode><CCM> <CommandLine>SMSSITECODE=ZAV FSP=SCCMSRV-02 DISABLESITEOPT=True SMSCACHEDIR=Cache SMSCACHEFLAGS=MAXDRIVE SMSCACHESIZE=20000</CommandLine> </CCM><FSP> <FSPServer>SCCMSRV-02.snba.be</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="snba.be" /><Forest Value="snba.be" /></ClientOperationalSettings>']LOG]!><time="07:29:26.401-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="lsadcache.cpp:236">
<![LOG[HTTP is selected for Client. The current state is 0.]LOG]!><time="07:29:26.403-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmutillib.cpp:420">
<![LOG[The MP name retrieved is 'SCCMSRV-02.snba.be' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="07:29:26.404-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="lsadcache.cpp:334">
<![LOG[MP 'SCCMSRV-02.snba.be' is compatible]LOG]!><time="07:29:26.404-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="lsadcache.cpp:339">
<![LOG[Retrieved 1 MP records from AD for site 'ZAV']LOG]!><time="07:29:26.404-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="lsadcache.cpp:287">
<![LOG[Retrived site version '5.00.7958.1000' from AD for site 'ZAV']LOG]!><time="07:29:26.405-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:575">
<![LOG[SiteCode: ZAV]LOG]!><time="07:29:26.405-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2076">
<![LOG[SiteVersion: 5.00.7958.1000]LOG]!><time="07:29:26.406-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2077">
<![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="07:29:26.406-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2111">
<![LOG[Deleted file C:\Windows\ccmsetup\client.msi]LOG]!><time="07:29:26.413-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:9493">
<![LOG[Only one MP SCCMSRV-02.snba.be is specified. Use it.]LOG]!><time="07:29:26.414-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:10080">
<![LOG[Searching for DP locations from MP(s)...]LOG]!><time="07:29:26.414-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:11018">
<![LOG[Current AD site of machine is DAT]LOG]!><time="07:29:26.415-120" date="04-17-2014" component="LocationServices" context="" type="1" thread="2724" file="lsad.cpp:770">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="07:29:26.415-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="lsad.cpp:714">
<![LOG[Current AD forest name is snba.be, domain name is snba.be]LOG]!><time="07:29:26.419-120" date="04-17-2014" component="LocationServices" context="" type="1" thread="2724" file="lsad.cpp:842">
<![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="07:29:26.424-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="ccmiputil.cpp:117">
<![LOG[Begin checking Alternate Network Configuration]LOG]!><time="07:29:26.424-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="ccmiputil.cpp:1095">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="07:29:26.433-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="ccmiputil.cpp:1172">
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="ZAV"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
<ADSite Name="DAT"/>
<Forest Name="snba.be"/>
<Domain Name="snba.be"/>
<IPAddresses>
<IPAddress SubnetAddress="172.31.20.0" Address="172.31.20.101"/>
<IPAddress SubnetAddress="172.31.105.0" Address="172.31.105.17"/>
<IPAddress SubnetAddress="172.31.109.0" Address="172.31.109.135"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="07:29:26.441-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{76CC1A6C-D696-4C32-82D6-4F56FCA9E926}</ID><SourceHost>SCCMSRV-02</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:SCCMSRV-02:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>SCCMSRV-02.snba.be</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-04-17T05:29:26Z</SentTime><Body Type="ByteRange" Offset="0" Length="1338"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="07:29:26.441-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTP://SCCMSRV-02.snba.be/ccm_system/request']LOG]!><time="07:29:26.442-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[Content boundary is '--aAbBcCdDv1234567890VxXyYzZ']LOG]!><time="07:29:27.999-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="httphelper.cpp:1972">
<![LOG[Received header '<Msg SchemaVersion="1.1">
<ID>{431A4120-7DA1-4EF2-8A6C-2EDEF4D9E169}</ID>
<SourceID>GUID:1C3F455F-F166-4B50-BE8E-68FD4F565096</SourceID>
<SourceHost>SCCMSRV-02</SourceHost>
<TargetAddress>direct:SCCMSRV-02:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>SCCMSRV-02</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-04-17T05:29:27Z</SentTime><Body Type="ByteRange" Offset="0" Length="2504"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property Name="AuthSenderMachine">SCCMSRV-02;SCCMSRV-02.snba.be;</Property><Property Name="MPSiteCode">ZAV</Property></Hook></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="07:29:27.999-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="httphelper.cpp:1724">
<![LOG[Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="ZAV" MasterSiteCode="ZAV" SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114" Signature="http://SCCMSRV-02.snba.be/SMS_DP_SMSSIG$/ZAV00114"/><ADSite Name="DAT"/><IPSubnets><IPSubnet Address="172.31.20.0"/><IPSubnet Address="172.31.109.0"/><IPSubnet Address="172.31.105.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SCCMSRV-02.snba.be</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="ZAV00114" FullPackageVersion="1" FullPackageHash="BFC11E099E8F451107B43E0DBEFD93B01DB2D6453DA74F8A2CB94B73D676C1CD" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30357216;2152392064" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>']LOG]!><time="07:29:28.000-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:221">
<![LOG[Found local location 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:28.001-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:351">
<![LOG[Discovered 1 local DP locations.]LOG]!><time="07:29:28.002-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:11153">
<![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:28.002-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[Using DP location http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114]LOG]!><time="07:29:28.009-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:11395">
<![LOG[GET 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114/ccmsetup.cab']LOG]!><time="07:29:28.009-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted.]LOG]!><time="07:29:28.090-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="util.cpp:1465">
<![LOG[Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab.]LOG]!><time="07:29:28.101-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6670">
<![LOG[Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from manifest]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:668">
<![LOG[Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000']LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:703">
<![LOG[Site version '5.00.7958.1000' is compatible. Client deployment will continue.]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:726">
<![LOG[Location 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114' passed site version check.]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6809">
<![LOG[Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:153">
<![LOG[Successfully loaded ccmsetup manifest file.]LOG]!><time="07:29:28.106-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:171">
<![LOG[Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000']LOG]!><time="07:29:28.106-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:10475">
<![LOG[Running from temp downloaded folder or manifest is not newer than ccmsetup.]LOG]!><time="07:29:28.107-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2213">
<![LOG[Item 'i386/vcredist_x86.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.212-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'x64/vcredist_x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.269-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/vc50727_x86.exe' is not applicable.]LOG]!><time="07:29:28.269-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/vc50727_x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.325-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/WindowsUpdateAgent30-x86.exe' is not applicable.]LOG]!><time="07:29:28.325-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/WindowsUpdateAgent30-x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.380-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/msxml6.msi' is not applicable.]LOG]!><time="07:29:28.380-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/msxml6_x64.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.433-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/msrdcoob_x86.exe' is not applicable.]LOG]!><time="07:29:28.433-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/msrdcoob_amd64.exe' is not applicable.]LOG]!><time="07:29:28.434-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'pkgmgr.exe' is not applicable.]LOG]!><time="07:29:28.434-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'dism.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.504-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'wimgapi.msi' is not applicable.]LOG]!><time="07:29:28.504-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'i386/MicrosoftPolicyPlatformSetup.msi' is not applicable.]LOG]!><time="07:29:28.504-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/MicrosoftPolicyPlatformSetup.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.560-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/WindowsFirewallConfigurationProvider.msi' is not applicable.]LOG]!><time="07:29:28.561-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/WindowsFirewallConfigurationProvider.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.615-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/Silverlight.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.670-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/wic_x86_enu.exe' is not applicable.]LOG]!><time="07:29:28.670-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/wic_x64_enu.exe' is not applicable.]LOG]!><time="07:29:28.670-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'i386/dotNetFx40_Client_x86_x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.723-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'SCEPInstall.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.779-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/client.msi' is not applicable.]LOG]!><time="07:29:28.779-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/client.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.841-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmutillib.cpp:1363">
<![LOG[Default CSP Type is 24]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmutillib.cpp:1364">
<![LOG[Discovering whether item 'i386/vcredist_x86.exe' exists.]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Detected item 'i386/vcredist_x86.exe']LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/vcredist_x64.exe' exists.]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Detected item 'x64/vcredist_x64.exe']LOG]!><time="07:29:28.843-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/vc50727_x64.exe' exists.]LOG]!><time="07:29:28.843-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Upgrade code '{A8D19029-8E5C-4E22-8011-48070F9E796E}': product = '{ad8a2fa1-06e7-4b0d-927d-6e54b3d31028}', installed = 1, version = 8.0.61000]LOG]!><time="07:29:28.843-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="msiutil.cpp:1273">
<![LOG[Checking '{A8D19029-8E5C-4E22-8011-48070F9E796E}' version '8.0.61000' expecting >= '8.0.61000'.]LOG]!><time="07:29:28.844-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:873">
<![LOG[Detected item 'x64/vc50727_x64.exe']LOG]!><time="07:29:28.844-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/WindowsUpdateAgent30-x64.exe' exists.]LOG]!><time="07:29:28.844-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Checking file 'C:\Windows\system32\wuapi.dll' version '7.6.7600.0256' expecting >= '7.4.7600.226'.]LOG]!><time="07:29:28.846-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1278">
<![LOG[Detected item 'x64/WindowsUpdateAgent30-x64.exe']LOG]!><time="07:29:28.846-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/msxml6_x64.msi' exists.]LOG]!><time="07:29:28.846-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Checking file 'C:\Windows\system32\msxml6.dll' version '6.30.7601.17857' expecting >= '6.10.1129.0'.]LOG]!><time="07:29:28.847-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1278">
<![LOG[Detected item 'x64/msxml6_x64.msi']LOG]!><time="07:29:28.847-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'dism.exe' exists.]LOG]!><time="07:29:28.847-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[File 'C:\Windows\system32\msrdc.dll' exists. Discovery passed]LOG]!><time="07:29:28.848-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1250">
<![LOG[Detected item 'dism.exe']LOG]!><time="07:29:28.848-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/MicrosoftPolicyPlatformSetup.msi' exists.]LOG]!><time="07:29:28.848-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Upgrade code '{19B9818B-7432-49E9-BC02-B126025EE235}': product = '{90D295B8-BA08-487E-B904-0E624209A410}', installed = 1, version = 1.2.3602.0]LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="msiutil.cpp:1273">
<![LOG[Checking '{19B9818B-7432-49E9-BC02-B126025EE235}' version '1.2.3602.0' expecting >= '1.2.3602.0'.]LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:873">
<![LOG[Detected item 'x64/MicrosoftPolicyPlatformSetup.msi']LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/WindowsFirewallConfigurationProvider.msi' exists.]LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Validated file 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' hash '3BF0651FD4A01170925CEF694468D4EF6F64D76FD3413DEBD14CB8DE019AA10E']LOG]!><time="07:29:28.868-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="util.cpp:2609">
<![LOG[File 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' exists. Discovery passed]LOG]!><time="07:29:28.868-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1250">
<![LOG[Detected item 'x64/WindowsFirewallConfigurationProvider.msi']LOG]!><time="07:29:28.868-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'i386/Silverlight.exe' exists.]LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[32-bit Hive selected]LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:948">
<![LOG[Detected item 'i386/Silverlight.exe']LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'i386/dotNetFx40_Client_x86_x64.exe' exists.]LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Detected item 'i386/dotNetFx40_Client_x86_x64.exe']LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'SCEPInstall.exe' exists.]LOG]!><time="07:29:28.870-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Validated file 'C:\Windows\ccmsetup\SCEPInstall.exe' hash 'FDDB17A148D8358B5BFBF63BBB3CDE902DCE807366081FE16B8E6042DCB47C71']LOG]!><time="07:29:29.649-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="util.cpp:2609">
<![LOG[Checking file 'C:\Windows\ccmsetup\SCEPInstall.exe' version '4.3.0220.0000' expecting >= '4.3.220.0'.]LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1278">
<![LOG[Detected item 'SCEPInstall.exe']LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/client.msi' exists.]LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Item x64/client.msi has not been installed yet. Put to pending install list.]LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:609">
<![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[No client patches are detected.]LOG]!><time="07:29:29.658-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:1736">
<![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:29.658-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[No client language packs are detected.]LOG]!><time="07:29:29.664-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:1777">
<![LOG[Searching for available transform]LOG]!><time="07:29:29.665-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1807">
<![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:29.665-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[No transform available for this locale. Installation will proceed with no transformation.]LOG]!><time="07:29:29.671-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1892">
<![LOG[File 'C:\Windows\ccmsetup\client.msi' doesn't exist.]LOG]!><time="07:29:29.672-120" date="04-17-2014" component="ccmsetup" context="" type="2" thread="2724" file="util.cpp:2595">
<![LOG[Using branch cache option.]LOG]!><time="07:29:29.690-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6443">
<![LOG[Adding file 'http://SCCMSRV-02.snba.be:80/SMS_DP_SMSPKG$/ZAV00114/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'.]LOG]!><time="07:29:29.690-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6474">
<![LOG[Starting BITS download for client deployment files.]LOG]!><time="07:29:29.698-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6487">
<![LOG[Download Update: 32616448 out of 32616448 bytes transferred.]LOG]!><time="07:29:30.700-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6578">
<![LOG[Successfully completed BITS download for client deployment files.]LOG]!><time="07:29:32.701-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6536">
<![LOG[Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package]LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:678">
<![LOG[Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000']LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:703">
<![LOG[Site version '5.00.7958.1000' is compatible. Client deployment will continue.]LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:726">
<![LOG[Successfully downloaded client files via BITS.]LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1396">
<![LOG[Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878']LOG]!><time="07:29:35.032-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="util.cpp:2609">
<![LOG[An MP exists on this machine.]LOG]!><time="07:29:35.048-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="msiutil.cpp:565">
<![LOG[The client version 5.00.7958.1000 does not match the MP version 5.00.7804.1000. The client will not be installed.]LOG]!><time="07:29:35.048-120" date="04-17-2014" component="ccmsetup" context="" type="3" thread="2724" file="msiutil.cpp:583">
<![LOG[Sending Fallback Status Point message to 'SCCMSRV-02', STATEID='318'.]LOG]!><time="07:29:35.049-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:9756">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x80041010]LOG]!><time="07:29:35.054-120" date="04-17-2014" component="ccmsetup" context="" type="2" thread="2724" file="ccmsetup.cpp:9838">
<![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="07:29:35.054-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:9887">
<![LOG[State message with TopicType 800 and TopicId {5FF017B3-AF3F-4D38-B037-0A7EE1F479C5} has been sent to the FSP]LOG]!><time="07:29:35.075-120" date="04-17-2014" component="FSPStateMessage" context="" type="1" thread="2724" file="fsputillib.cpp:752">
<![LOG[InstallFromManifest failed 0x80004005]LOG]!><time="07:29:35.084-120" date="04-17-2014" component="ccmsetup" context="" type="3" thread="2724" file="ccmsetup.cpp:7202">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="07:29:35.086-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:10879">
I hope someone can help me with this.
Kind regards

I agree with Idan. You can easily remove the Management Point Site System role and add it again with no adverse effect. This should solve your problem.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Trying to capture in FCP 6.06 w/ Sony fx 1000

Trying to capture footage in FCP 6.06 from an fx 1000.
FCP does not seem to see the camera while it is in vcr mode and hooked up through firewire.
I think I have FCP fully updated but don't see the options for hdv to capture. Need help with proper capture settings and any updates in codecs or software I may need.
Read through numerous other topics but can't quite find the answers I need.
Any help would be great
Running a iMac with 3.06 dual core and 4gb or ram with FCP 6.06 and osx 10.5.8

Hi
An Amateur trying to be of help. This is a problem in several movie editors
My general list might give a clue to Your problem too
BTW - a very interesting Camera - might look for it - upgrade is of need to me.
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W

I am trying to view pdfs but when i click on them lots and lots of tabs keep appearing at the top i've had 1000s,how can i stop this and how can i look at pdfs

I received an email from my power supplier,in it I must click on bill to view,it downloads and asks if I want to open it with internet explorer or something else,so I click on firefox.All it does is keeps opening loads and loads of tabs across the top,I've tried to close them at the last count I had managed to close over 1000 tabs but still cannot see my bill.my wife had the same she tried to open pdfs and got the same problem.So how can we view without problems files we receive in emails etc,and how do I get rid off this tab multipling itself? Thanks

hi thanks for that info,but I tried the first help email I received and that one did the trick.Tahanks again for your in put.

Remote update of a 1000 series LWAP

My company recently went from an old airspace 4024 with firmware 3-2-195-13 to a new 4402-50 running 4-1-185-0. Using Option 43 in DHCP allowed the new 4402 to see the AP's on different VLan's and Subnet's and issue IP addresses to the AP's and clients. It appears several of the AP's have not pulled down the new firmware and are stuck at 3.2. I have rebooted the AP's and tried multiple other tricks. Is there a Cisco utility that will allow me to update these LWAP's via mac or IP? Any suggestions would be appreciated. I'm sure I could go around, collect these AP's bring them back to the 4402's location throw it in layer 2, reboot and they would take the update but that is too time consuming of a process.

I know from experience that the 1131 and 1230 APs can't be upgraded from 3.2 to 4.1 because a 440x controller can't be upgraded from 3.2 to 4.1.
Check the release notes on the 4-1-185 software.
They state:
"Important Note: If you are running any lower version than 4.0.206.0 in 4.0 stream or if you are running lower version than 3.2.195.10 image in 3.0 stream , please upgrade the controller to 4.0.206.0 or higher for 4.0 stream and 3.2.195.10 or higher for 3.0 stream before loading 4.1.171.0 image."
They are suggesting that if you want your APs to upgrade from their current 3.2 software you must upgrade them to 4.0.x software first. Then you can upgrade to 4-1-185.
I would downgrade the controller software and see if the 1000 series APs will run the lower version. Then I would upgrade the controller to the latest software and verify that these APs are running 4-1-185 software.
Hope this helps.

Cannot find drivers for HP laserjet 1000

for the love of GOD, can someone tell me why this is so difficult?
I'm on OSX 10.6.8 and the one printer that apple did not install drivers for is the one I am using: HP LASERJET 1000.
I have scoured the forums, and the queries that have been answered date back to four years ago, with the referenced links leading to non-existent sites.
Finally, I found some information.
I downloaded the open-source drivers called foo2zjs, but along with those you need FOOMATIC RIP and GHOSTSCRIPT, available from the Linux Foundation. Without the latter, the former won't work!
Thing is, the download links for FOOMATIC and GHOST don't work. I get a loading reset error
https://wiki.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
What, pray tell, do I need to do to print something? Why is this so difficult?
Please help save a human life today; give me the answers.
It's good karma
PS: contrary to my product listed, this matter concerns an iMac, not a macbook pro. thanks!

Joni Chacho wrote:
I downloaded the open-source drivers called foo2zjs, but along with those you need FOOMATIC RIP and GHOSTSCRIPT, available from the Linux Foundation. Without the latter, the former won't work!
Thing is, the download links for FOOMATIC and GHOST don't work. I get a loading reset error
https://wiki.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
That page is an old page. It should have redirected you to http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic .
Message was edited by: Matt Broughton

Digital Editions on iRex Digital Reader 1000?

Hello,
iRex Technologies has just released their second generation e-reader, the Digital Reader 1000 (DR1000), with a 10.2 inch diagonal screen. They have a framework called the Universal Document Shell that allows 3rd parties to write document viewers that will plug into the DR1000. The DR1000 software development kit will be available the 1st week of October. Please port Digital Editions to the DR1000. I have been holding off on making too many DE purchases (only have 2 so far) until a larger screened reader came out. Its here but I now need to wait longer now for it to have ADE.
Thanks,
Edmund
DR1000 product page
[www.irextechnologies.com/irexdr1000]
An excerpt from the DR1000 FAQ
[www.forum.irexnet.com/viewtopic.php?t=2859]
Q: Will there be any additional formats supported in the future and how will this work?
A: Yes I imagine that additional format support will be added over time. We have separated functions from formats. A specific content format is rendered in the memory by a small rendering engine. The functions like zoom or bookmark are controlled by our Universal Document Shell or UDS. The UDS will load the correct rendering engine and tells it which page to render in the memory. When a specific function is not available for a specific format (e.g. increase font size in PDF), the UDS will disable this function in the menu.
This way third party developers will be able to easy add content plug-ins, which will be stored on the memory as add-ons. The advantage of this approach is that the user experience and interface will be consistent over all applications. Currently we support a PDF, Mobipocket, TXT and image plug-in.

I purchased an Ebook from McGraw-Hill while on my home computer. In the process of purchasing it, I was prompted to download Adobe Digital Editions, which I did. I am able to open the ebook on my home computer with Digital Editions, but I would like to copy/transfer the Ebook on to a CD or device. I copied the entire Digital Editions file, including the Ebook, onto a CD, but when I open the CD on another computer it does not include the Ebook.
How can copy the Ebook onto a CD/device and/or have access to the Ebook from a computer other than my home computer?
Thanks,
John

Dateformat 1000*60*60*24

Similar Messages

Maybe you are looking for

Dateformat 10006060*24