Dates and charting

Dates Reading
19/12/06 - 21/03/07 273
21/03/07 - 18/05/07 49
18/05/07 - 30/07/07 37
30/07/07 - 18/09/07 24
18/09/07 - 16/10/07 29
Above is a small section of data that I wish to display graphically either as a pie of bar chart or anything that shoes the dates against the reading however I can't get the dates to show up on the chart against their respective readings. I've tried formatting the cells to show the date but to no avail.
Sorry but the word "Reading" should appear above the column of number beginning with 273 but I can't get it to do it here on this post.
Any help would be appreciated.
Thanks

Gareth56 wrote:
Perhaps it was because I didn't use Header Columns & Header Rows, I still don't understand what they're for and why they're used when it comes to creating charts/graphs as you don't use them in Excel.
Sure, I don't use headers with Excel I refuse to use Microsoft products !
Excel is a product, it is not tables of law.
Apple is perfectly free to think different and that's why I use Apple products.
They aren't behaving like "moutons de Panurge".
However thanks for the reply. Do you also know how I can with respect to the colours have a different colour for each data entry. In your bar chart all the bars are the same colour, blue, is it possible to have each bar a different colour to futher exemplify the differences between them?
As far as I know (but maybe I missed something) the bars are linked and if we change the color, it will be the same for every bars.
Yvan KOENIG (from FRANCE samedi 9 mai 2009 21:25:16)

Similar Messages

How to display dynamic datas and double datas (chart)

Hi all !
I would like to display dynamic datas and double datas by using charts.
However, it doesn't work and I don't understand why.
Can you help me to fix that ?
Best regards,
- John
Attachments:
double_dynamics_data.vi ‏54 KB

Hi John,
the sine looks like it should look with your VI!
You convert the DDT to a scalar DBL. That conversion will only use the first sample of the generated sine waveform - usually this is always the same (offset) value when you generate full periods… Or to put it in a mathematical expression: sin(0°)+4 = 4!
When you want to display waveform you should work with waveforms!
Actually, I have used Dynamic data type in order to simulate an signal.
Well, I also simulated a signal in my example VI. I didn't use any ExpressVI to do so…
In a few weeks, I will receive a sensor. I will use in LabView 'DAQ Assistant' whose the ouput is a Dynamic Data.
Nobody forces you to use the DAQAssistent ExpressVI. There are nice DAQmx functions available and LabVIEW comes with a lot of ready-to-use example VIs…
That's why, I used in first place, the 'Simulate signal'. So I think I should keep Dynamic Data Type
I do think you don't need to use the DDT. I think it's better to understand what is going on in your VI. And I think the DDT will be no help for you…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Display data into Chart Js

1
I Have Problem in display data into Chart Or chartJs ,
In my Controller I Return Json and
use it in javascript like this but i have
error that tell me 't' is undefined
$(document).ready(function () {
$.getJSON("/Report/GetTransactions/", function (data) {
debugger;
var ctx = document.getElementById("myChart").getContext("2d");
var myBarChart = new Chart(ctx).Bar(data);
debugger;
data = {
labels: ["January", "February", "March", "April", "May", "June", "July"],
datasets: [
label: "My First dataset",
fillColor: "rgba(220,220,220,0.5)",
strokeColor: "rgba(220,220,220,0.8)",
highlightFill: "rgba(220,220,220,0.75)",
highlightStroke: "rgba(220,220,220,1)",
data: [data]
label: "My Second dataset",
fillColor: "rgba(151,187,205,0.5)",
strokeColor: "rgba(151,187,205,0.8)",
highlightFill: "rgba(151,187,205,0.75)",
highlightStroke: "rgba(151,187,205,1)",
data: [data]
and my controller is this
return Json(_reportRepository.GetTransactions(), JsonRequestBehavior.AllowGet);

Hi Mario Castro,
                          In selection Screen initially u have to enter the input value after provides some user command only next screen will be trigger.
In the next screen PBO event you cant assign selection screen Variable into next screen fields.
Eg.
Selection Screen Variable
          s_belnr
           s_bukrs
           s_gjahr
Next Screen
           t_belnr
           t_bukrs
           t_gjahr
In PBO you can code
          t_belnr = s_belnr
          t_bukrs = s_bukrs
         s_gjahr = s_gjahr
Revert back if any difficulties to do.
Regards,
       Thangam.P

Function Modules for Data and Time

Hi all,
I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in dd/mm/yyyy or dd.mm.yyyy and time in HH:MM:SS formats.
Thanks in advance

Hi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
If its usefull reward points

Questions on graphs and charts.,,,

Hi ,
I have always been facing problem while working with graphs and charts. First of all let me be clear with the data these accept. further questions as under:
1. If I wire an array (1-dimention) to graph/chart , it plots it on Y axis. In this case, what are the values on x.axis?
2. If I want to acquire a voltage on Analog I/P channel for some specified time , say 2 sec., how to ensure that time span and data without missing anyone.
3. If I have to plot an I-V plot, how to make sure that V will come on Y-axis and I will come on X-axis.
Plz clear these doubts...
Regards
GNS

Hi,
1. Charts takes sigle point value like plotting DC voltages, Graph takes set of values like arrays (1D) which are plotted on Y-axis with respect to x axis which is integer number like 0,1,2..etc.. ,
XY graph takes bundled array of X-axis & Y axis.
2. Charts are used where a single point value is to be presented/updated w.r.t. to time or x scale (x scale can also act an index).
Also it supports update modes like sweep, scope & strip.
3. Graph are used to plot waveforms which does have no. of samples acquired from DAQ board or other source, which needs to be plot on Y-axis.
Main inputs of waveforms are starting time (t0), time stpes(dt) & Y elements.
4.X-Y graphs are used where you want to plot Y elements w.r.t. to the defined X eleme
nts. For e.g. I want to plot as
Y=10 when X = 0
Y=20 when X = 2
Y=30 when X = 3
etc.
Here we have one array of Y elements & other array of X elements. So bundle your X & Y array & fetch to XY graph to plot it.
Hope it clears you the concepts. Your feedbacks are welcome.
Best Regards,
Nirmal Sharma
India

Graphs and Charts output in XML Publisher Report

Hi All,
I have incorporated the graphs and charts as well as some bitmap images in XML Report (RTF File), When i am taking a output in pdf. it is coming fine and working properly, where as while taking the same output in excel, graphs/charts/bitmap images are not getting displayed. Only you can view the data.
can you please suggest what's the issue on the same and how can be resolved.
Thanks & Regards
Ankur Dawra

Not sure you are on the right forum...

How to get the data in Charts

HI Guys,
In the BEX reports for the rows used the date and in the columns i have created a structue using the selections based on the KF. i have used the 29 KF in the structure. My problem i want to dispaly the data by spliting the key figures from 1-15 and 16-29 in the WAD for the tables and graphs
i did the settings for the tables as followed and getting the data correctly
Display data from value column = 1
Display data to value column = 15.
i want to apply the same settings for the graph.
Please help me where i need to do the settings for the series(legends).
Thanks,
Visu
Edited by: visu rao on Apr 9, 2008 5:45 PM

Hi Visu,
In Chart, you cannot have such option. You should have two same queries as such with 1 to 15 KF's in one query and 16 to 29 KF's (with structures) in second query with all other similar fields. Now use these two queries in two different charts with 15 categories in first chart and the other 14 categories in second chart. You can have the categories what ever you want... U just need to maintain in the query in the structure, the number of KF's... and the same number of categories in chart.
You can have the categories and series count in "Edit chart-->Wizard and Chart designer".
Assign points if this helps u...
Regards,
KK.

How to extract data from Chart History?

Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file, but how to extact data from the file?
How Labview store the data in the 2D history buffer?
Anybody has any examples?

The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
IntensityChartHistorySave.vi ‏79 KB

Highlighting Source Data When Chart is been moved to Another Sheet?

Hi,
I know that when a chart is chosen, it's corresponding data becomes highlighted when the two (table and chart) are on the same sheet. Is there a way to highlight the data when the two are on separate sheets, so one could toggle between the two sheets and make changes as necessary? I know I can move the chart back to the data sheet, make the changes and then move it back again to its own sheet. I have to do this, anyway, if I want to crop the chart (without deleting data) or shift the data in the chart to the right by a column or two, for example, but it would be so much nicer, if I could just highlight the data 'remotely' from the chart, so-to-speak. I have a couple of other reasons for wanting to do this also:
(1) I make my charts almost full screen size, so moving them back to the data sheet cuts them off (tough to see any changes without scrolling or shrinking the chart).
(2) I have multiple data tables on one sheet with multiple charts to complement the data tables. Putting all the charts and data on the same sheet can make for one very untidy sheet no matter how big the screen.
I've looked around on the forum and in Numbers Help, but found only one reference to moving charts to separate sheets. Unfortunately, it didn't address this particular issue. If I can suggest this to the Numbers developers, where can I go?
Thanks!

Hello
The only workaround that I found is to use an auxiliary table in the sheet where you display the chart.
In this auxiliary table the used formula is:
=Feuille 1 :: Tableau 1 :: A
Yvan KOENIG (from FRANCE mercredi 27 février 2008 16:00:7)

CRYSTAL REPORT GRAPH WITH DATE AND TIME

Post Author: Dino Dentone
CA Forum: Charts and Graphs
Dear forum,
I am developing a Visual Studio .net 2005 Windows Form,i have a sql table with 2 field:1) DATA (date and time)2) Temperatura (numeric)I have to make a line graph with numeric data axes.I have insert two parameters' to customize the filtering, so i can have a graph of the temperature between to date and time.If i choose two date's and time (parameters) like 20/04/2008 00:00:00 trought 20/05/2008 00:00:00 i have no problemBut if a choose a range minor of 1 day (some hours like from 15/05/2008 00:00:00 trought 15/05/2008 08:00:00) i have no graph.It sound like it don't use the time values?Thank's for the Help.

There is some debugging info on the website. I've had problems getting the text to work. It was generally that I installed either the wrong 'version' of ImageMagick (the recommended one works for me--I'm running Vista x64 and one time installed the x64 version and it didn't work). I also installed Ghostscript to get the font list to work correctly. At one time I installed the x64 version of Ghostscript and it didn't work with the plug-in, either.
I installed two items:
ImageMagick: ImageMagick-6.4.9-3-Q16-windows-dll.exe
Ghostscript: gs863w32.exe
I don't know if it is necessary but I also added the fonts from
ghostscript-fonts-std-8.11.tar.gz to the c:\Program Files (x86)\gs\fonts directory. Some, none, perhaps all, may already be installed just by installing ghostscript--it has been so long that I don't remember exactly. I do know that the contents of the gs fonts directory contains all the files in the .gz, I just don't remember if I put them there separately or as part of the gs install :)
You need to make sure the font size is large enough. I usually use about 2-4% of height and export a single photo to make sure I see the text correctly.
Tim does respond to email when he can so if you can't get it to work you can always drop him a line.

Current date and time in narrative. html?

Hello,
I would like to include current time and date in the narrative of a report. The purpose of this is that when end-users export the report a time and date of export is inlcuded in the export so that I know when specific reports where exported.
I now have a workaround with added hidden date and time columns and showing only first rows of these hidden columns. This is quite a lot of work since I have to update about 75 reports with this date and time values.
Does any of you know how to include currentdat and time in the narrative with a html code?
Or are there other ways to achieve what I am looking for?
Thanks a lot

Hi,
We had similar kind of requirement.
We have created a repository variable "CurrentDateTime" and added this in each and every report in the narrative view as below.
Steps:
1.Leave the existing Table view or chart view as it is.
2.Add one narrative to the existing report.
3.Modify the narrative view and paste the below logic in that.
Current Date: @{biServer.variables.CurrentDateTime}
Hopes this helps.
Thanks,
Pramod

Date and Time convertion in iChart

Hi,
My question is: The date and time field displayed in ichart is in a number format rather than a date and time format. Why?
1. A query is created first to extract data from an oracle database. The date and time is converted to a string by using to_char(x, yyyy-MM-dd, hh24:mi:ss) function.
2. An Axcute transaction is then used to convert date and time from the first query to XML date format: As suggested by Martin Auer on Aug 22, 2006 in his answer to Sudha, I create an output document in Business Logic Editor and define a column in DateTime format. The output from xAcute is in XML date format as 2006-12-14T13:21:00.
3. The second query is created to display data for the Axcute transaction. The output from the second query in Text/xml type is shown as: <TIME>2006-12-14T13:21:00</TIME>
4. However, when the date and time is displayed in iChart, the date and time on X-axis is presented as a number like 1.166.098.860.000,00. The data source for the chart is shown as: 2006-12-14 13:21:00
5. The display template is derived from a template used on the training course and date format in template is set to yyyy-MM-dd HH:mm:ss. The template is tested on the data from PlasticResin database (training course), the date and time is presented in a correct format.
Could someone please answer my question?
Thanks,
Xin

Xin,
If you test your query (I assume it is an Xacute query) and choose text/xml - what is the SQL data type for the date/time column?
It sound like the chart is not recognizing the query as a time-sensitive query.
Let me know what you find,
Joe Montagna

Displaying Graph and Charts in Portal

Hi Guys,
I want to display the Graph and charts dynamically in percentage wise for example ,I need to get the data from the data base of student table on passing marks of each subject i want to display the graph or chart accoridng to his marks ,,,
I am not able to find any help from searhing in web ,,
Please let me know for any help ....
Thanks in advance
Thanks
ravi

you could use the omniportlet, this come embbeded on WenCenter suite.
with this you can select you database and assign a sql query for show as graphic.
regards.

Re: internal battery for eMac. Where can I buy one? (Date and time are becoming garbled).

I have an eMac which shows the date and time as random figures, suggesting that the internal battery is dead. Where can I buy a replacement? My local Apple reseller does not stock them.
evan239

"It is in Western Australia, in a suburb of Perth."
That helps! Considering adding that to your profile. It can get you help faster for future "where to get" questions. We have a lot of active helpers here who are your countrymen (and women).
You may be able to find a battery seller locally, The PRAM battery is not limited to computer use. That model is also used in alarm systems. Look for a "1/2 AA 3.6V lithium" battery--that's about as generic description as one can give.
I found a seller that has a chart of battery number equivalents:
http://www.medicbatteries.com/battery-cross-reference-guide
Look at the last line. There is a long list of manufacturers' battery numbers that are 1/2AA 3.6V. As long as you find one that's lithium (haven't seen any that aren't) you should be good to go.
Regards from America's "Outback!"
Allan

Pivot tables and charts error: Please load datasource first

hi all,
i am getting a error: please load data source first in rtf template , only for pivot table and charts(note: normal tables and fields i can insert )
Please help me with this.
Thanks and Regards
Prakhar

Well... if you think and try long enough, you may find the solution .
The core problem is to reference to queried values not shown in the table/chart. And there IS a solution.
Just use...
NoFilter(RelativeValue([measure prior year_1];([year/month]);-12))
... instead of
RelativeValue([measure prior year_1];([year/month]);-12)
NoFilter enables RelativeValue to reference to values not present in a table or chart, but available in the report .
From there on, you can define e.g. the starting point of the category axis of a chart by defining a local filter without losing values to be referenced .

Dates and charting

Similar Messages

Maybe you are looking for