DB error - Ran out of memory retrieving results - (Code: 200,302) (Code: 209,879)

I am encountering an error while running a big job of about 2.5million records running thru the EDQ cleansing/match process.
Process failed: A database error has occurred : Ran out of memory retrieving query results.. (Code: 200,302) (Code: 209,879)
The server has 8gb memory with 3gb allocated to Java for processing. I could not see any PostgreSQL configuration files to tune any parameters. Need some help with configuring the PostgreSQL database I guess. Appreciate any suggestions!!

Hi,
This sounds very much like a known issue with the latest maintenance releases of EDQ (9.0.7 and 9.0.8) where the PostgreSQL driver that we ship with EDQ was updated to support later versions of PostgreSQL but has been seen to use huge amounts more memory.
The way to resolve this is to change the PostgreSQL driver that ships with EDQ to the conventional PostgreSQL version:
1. Go here PostgreSQL JDBC Download and download the JDBC4 Postgresql Driver, Version 9.1-902.
2. Put this into the tomcat/webapps/dndirector/WEB-INF/lib folder
3. Remove/rename the existing postgresql.jar from the same location
4. Rename the newly downloaded driver postgresql.jar
5. Restart the 3 services in the following order: Director database, Results database, Application Server)
With this version of the driver, the memory issues have not been seen.
Note that there are two reasons why we do not ship this driver as standard, so you may wish to be aware of the impact of these if you use the standard driver:
a. Drilldown performance from some of the results views from the Parse processor may be a little slower.
b. There is a slim possibility of hitting deadlocks in the database when attempting to insert very wide columns.
Regards,
Mike

Similar Messages

SharePoint 2013 Search - Zip - Parser server ran out of memory - Processing this item failed because of a IFilter parser error

Moving content databases from 2010 to 2013 August CU. Have 7 databases attached and ready to go, all the content is crawled successfully except zip files. Getting errors such as
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/file1.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The function encountered an unknown error.; ; SearchID = 7A541F21-1CD3-4300-A95C-7E2A67B2563C
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/file2.zip'. Document failed to be processed. It probably crashed the server.; ; SearchID = 91B5D685-1C1A-4C43-9505-DA5414E40169 )
SharePoint 2013 in a single instance out-of-the-box. Didn't install custom iFilters as 2013 supports zip. No other extensions have this issue. Range in file size from 60-90MB per zip. They contain mp3 files. I can download and unzip the file as needed.
Should I care that the index isn't being populated with these items since they contain no metadata? I am thinking I should just omit these from the crawl.

This issue came back up for me as my results aren't displaying since this data is not part of the search index.
Curious if anyone knows of a way to increase the parser server memory in SharePoint 2013 search?
http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip'. Document failed to be processed. It probably crashed the
server.; ; SearchID = 097AE4B0-9EB0-4AEC-AECE-AEFA631D4AA6 )
http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The
function encountered an unknown error.; ; SearchID = 4A0C99B1-CF44-4C8B-A6FF-E42309F97B72 )

Flash CS6, QuickTime: The export operation failed because it ran out of memory.

Exporting a QuickTime movie file seems to be an old issue with previous versions too. In CS6 I always get the error message: "The export operation failed because it ran out of memory." I've got tons of memory and have allocated increasing amounts to the cache with no success.
My small and fairly simple file was created with Flash CS5 which seemed to work fine at the time of creation. I've tried everything recommended online but with no luck so far. BTW, I reinstalled CS5 and tried that too but it just hangs now, and there's no error message.
Does anyone have a solution?
(OS X 10.7.4)

If I may join this discussion... I loaded up CS6 two days ago and have just completed my first 60 second animation using it. Like everybody else here, it all went fine until I tried to export it to QuickTime – something that has never been problematic before.
I ended up exporting it as a swf and opening that in CS4. Then I could export it, but the resulting QuickTime movie was over 500 MB in size! Okay, so then I opened it in QuickTime Pro and exported it from there. This brought the file size down to a far more reasonable 35 MB, but now the soundtrack has gone! So now I am having to replace the sound in Final Cut Pro.
This is a real palaver – and not conducive to heaping praise on CS6 when questioned. I note that there is talk of Adobe rectifying this "bug", but it would be really good to hear from somebody at Adobe with:
a) An apology
b) An estimated time of delivery
c) A best practice work round
But I'm guessing that anybody that works at Adobe will be the last person to read this...

Hash Table Infrastructure ran out of memory Issue

I am getting ORA-32690 : Hash Table Infrastructure ran out of memory error, while executing an Informatica mapping using Oracle Database ( Test Environment)
The partition creation is as shown below.
TABLESPACE MAIN_LARGE_DATA1
PARTITION BY LIST (MKTCD)
PARTITION AAM VALUES ('AAM')
TABLESPACE MAIN_LARGE_DATA1,
PARTITION AHT VALUES ('AHT')
TABLESPACE MAIN_LARGE_DATA1,
PARTITION GIM VALUES ('GIM')
TABLESPACE MAIN_LARGE_DATA1,
PARTITION CNS VALUES ('CNS')
TABLESPACE MAIN_LARGE_DATA1,
PARTITION AOBE VALUES ('AOBE')
TABLESPACE MAIN_LARGE_DATA1,
PARTITION DBM VALUES ('DBM')
TABLESPACE MAIN_LARGE_DATA1
Could you please provide me with a solution to this problem asap?

SQL statement and execution plan? Is there a server-side trace file created for the session?
From the brief description, it sounds like bug 6471770. See Metalink for details. The workaround for this particular bug is to either disable hash group-by, by setting +"_gby_hash_aggregation_enabled"+ to FALSE (using an ALTER SESSION statement . Or by using a NO_USE_HASH_AGGREGATION hint.
Suggest you research this problem on Metalink (aka MyOracleSupport at https://support.oracle.com)

Encountering with the error Client out of memory in Bex. . .

Hello All,
In the Bex report when I run for the 2000 sales organization selection the initial display is coming fine. When I try to drill down to the next levels in the result, I am encountering with the error 'CLENT OUT OF MEMORY'.
The report is displaying sales document level data. I need to drill down on almost 6 fields like cost element, Profit center. Auth group, Cost center, Customer number... Up to 7 attributes.
I am able to drill down up to 5 attributes when i try to drill down on the 6th one, the report ended up with this error.
Note: I am able to run the report for remaining sales orgs and can drill down on all the fields. Might be because of huge data not able drill down on 2000, not sure
Any one could help me on this.
Thanks in Advance,
Lakshmi.

I checked in the infoprovider level.
For the same selection, we have around 450000 of cells.
Thank you,
Lakshmi.

After Effects Error: Keylight out of memory (4)

After Effects CS4 keeps crapping out on me, and won't allow me to render my projects. I keep getting the message, "After Effects Error: Keylight out of memory (4)"
I'm running a brand new IMac 3.4 GHz Intel Core I7 (which I understand gives me virtually 8 cores), and I have 8 GB of Ram.
I've tried with multi-frame processing enabled, and dissabled and the same thing. When I tried with the mulit-frame enabled I selected allow 4 CPU's Free and allow 6CPU's free, and still the same results. Any help would be greatly apprecicated.
Thanks!

Since you run AE 9, it's probably your footage. Okay, it's the most likely cause, at least. Here's a copy 'n paste response I used to use a LOT on the Creative COW:
Dave's Stock Answer #1:
If the footage you imported into AE is any kind of the following -- footage in an HDV acquisition codec, MPEG1, MPEG2, AVCHD, mp4, mts, m2t, H.261 or H.264 -- you need to convert it to a different codec.
These kinds of footage use temporal, or interframe compression. They have keyframes at regular intervals, containing complete frame information. However, the frames in between do NOT have complete information. Interframe codecs toss out duplicated information.
In order to maintain peak rendering efficiency, AE needs complete information for each and every frame. But because these kinds of footage contain only partial information, AE freaks out, resulting in a wide variety of problems.
I'm a Mac guy, so I like to convert to Quicktime movies in the Animation or PNG codecs; both are lossless. I'll

Hash Table Infrastructure ran out of memory

Hi Gurus,
We are using oracle 10.2.0.3 on sparc solaris 64 bit with 16 CPU and 32GB of physical memory. Our sga_target is 12G and pga target is 15G.
We are receiving
ORA-32690: Hash Table Infrastructure ran out of memory
We had identified query which is running in parallel 8 and using huge hash group by. May be due to that this error is there.
We are doing kind of
select x,y,z from abc partition(Q) group by x,y,z;
Where Partition is hash partition.
But here are some questions
1. How to find why this error is coming. Any trace dump or pga dump can help ? Because i believe it was not using temp space at all. We have 2 TB temp space free.
2. i think for hash group by if it don't get any memory it spill to temp ? then why this error
3. How to monitor this while this error is happening.
4. How to dig into issue using dumps and what to look for.
5 IS PGA_AGGREGATE_TARGET only use 5 % for each parallel process

Re: ORA-32690: HASH TABLE INFRASTRUCTURE RAN OUT OF MEMORY

Error 500 Out of Memory on x64 bit machine

Using windows vista 64bit business
x64 bit machine 32 bit application
using visual fox pro odbc driver
Happens on Crystal reports 8 and 10
After 3+ million records with our query we receive an Error 500 out of memory.
Under windows 32bit machine, we haven't encountered this issue regardless the size of data.
Any thoughts?

Hi Alex
As mentioned earlier Crystal Reports 9 and 10 are not tested platfrom with Windows Vista.
Try using Crystal Reports 2008 and check if you are facing any issues.
Hope this helps.
Please let us know if you have any further queries.
Regards
Ashwini Yadav

Run-time error '7': Out of memory - Cisco Clean Access problem

Hi all,
I hope this question is in the appropriate place. I'm trying to use my company's vpn service. Here's how the process should work:
1) Log on with username/password using Cisco AnyConnect VPN Client
2) Log-in to the portal. During this step the Cisco Clean Access Agent is supposed to automatically log-in. However I get the following error:
Run-time error '7':
Out of memory
My company's network services didn't seem to be much of a help so I was hoping one of you would have a good suggestion(s).
Please keep in mind that I'm not great with computers. I know how to use them and all that but I'm not familiar with the inner-workings at all (registry editing etc.)
Thanks in advance!
-Bill

I should add that the version of CCA is 4.1.10

C-runtime error occured "Out of Memory"

Cannot display the selected records when an end user clicks the (>*) button next to the record count. Instead of displaying all the records based on the prompted selection criteria, the record count (28,338) is shown by itself without the data after a few minutes of waiting. Above the record count and selected prompts, "!error: A C-runtime error occurred (Out of Memory)" is shown twice. No data.
So long as the end user does not click the (>*) button next to the record count, everything works okay. End user can download the entire set of selected records to a tab-delimited .csv file without any problem. End user can also scroll thru the 28,338 records, one page at a time. Using more restrictive selection criteria, I can view several thousand records at a time. No problem until the (>*) button is clicked when 28,338 records are requested.
We recently doubled the memory on our desktops from 1GB to 2GB. No help attempting to display all records.
Problem reproduced at will in both OBIEE 10.1.3.3.2 and 10.1.3.4.1 environments using either IE 8.0 or Firefox 3.6 on Windows XP Pro.
How can we reconfigure our environment to display the 28,338 records on a desktop without running Windows XP out of memory?

The C:\OracleBIData\tmp directory on the desktop appears empty before, during and after the query.
In addition in Windows Task Manager, the Networking tab for the Local Area Connection shows a steady, but less than 0.5%, activity stream for the duration. CPU use and paging is also minimal.
Edited by: bobatx on Dec 23, 2010 10:04 AM

How do I fix Error Message = Out Of Memory Could Not Install or Delete Data"

I have looked all over the internet and there is a lot of discussion about WHY this happens and a lot of discusion about what to do in the future to avoid this from happening.
I need help with specific steps on how to delete the static image that is stuck on my desktop. The image is large and covers most of my screen. I have shut down, unplugged, let the machine rest....started up several times. Not working.
The error reads "OUT OF MEMORY - COULD NOT INSERT OR DELETE DATA"
Thanks!

Probably you are running out of disk space. Can you interact with your Mac at all, or is the error message preventing you from using Finder windows?
I'd try to boot into Save Mode: This will only load a rudimentary version of Max OS X, needing less space, and will clean some caches. The Start Up will tale longer, however.
When in Save Mode try to empty the Trash and to free as much disk space as you can, by deleting files.
How much free disk space do you have right now?
See:
http://www.wikihow.com/Start-Your-Mac-in-Safe-Mode
If you cannot access the FInder to free disk space, even in Save Boot Mode, post back.
Regards
Léonie

HELP! FLASH CS6 "The export operation failed because it ran out of memory"

Hey guys, really need your help on this one. I can't seem to export my flash animation video. It kept failing and prompting that "The export operation failed because it ran out of memory"
Anyone knows a solution to this. It will be very much appreciated.
Thank you very much.

Hi,
It totally depends on what's the content you are trying to export. The reason is as simple as it says. The content might be really huge that it ran out of memory. Any info you can provide on the kind of stuff you have in the file?
- Hemanth

Error #3121 out of memory

ＨＴＭＬ形式で書き出しでエラー「error #3121 out of memory」が出ます。
原因と解決方法を教えて下さい。

これ迄、ＨＴＭＬ形式で書き出しでエラーが出た事は無かったですが、「error #3121 out of memory adobe muse」で検索したところ、下記を見つけました。
Adobe Muse crashes when i make a right mouseclick in the element library
<BB68E8CC-422F-3121-8C86-D0F766FB696D>とあります。
http://forums.adobe.com/message/5920753
Google翻訳（http://translate.google.co.jp/）で見ました。
内容が難解でよくわかりませんが、OS 10.9をお使いですか？
内容としましては、スタッグの方の回答を期待するしかないです。

Error: cc1obj: out of memory allocating 1130584464 bytes after a total of 0

hi guys : )
I have a weird bug. It's a compile time error but only happens when i compile in release config. when i compile in debug mode, my app runs perfectly. when i compile in release mode (even to simulator) i get this error:
cc1obj: out of memory allocating 1130584464 bytes after a total of 0 bytes
Command /Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.0 failed with exit code 1
any one else seen this?

the file was too big : )

Error 21 - Out of Memory

Already created file, attempting to modify. Receiving "Error 21, Out of Memory" message.

Hi Don ,
Could you please provide me with with some more details about the PDF and the Acrobat version?
What version of Acrobat are you using ?
What kind of PDF is it?
What version of OS are you using?
Try deleting the temp files and see if that helps.
Try modifying any other PDF and compare the outcome .
Regards
Sukrit Dhingra

DB error - Ran out of memory retrieving results - (Code: 200,302) (Code: 209,879)

Similar Messages

Maybe you are looking for