DB + grid upgrade from 11.2.0.1 to 11.2.0.3 with EBS 12.1.3

HI
i am planning to upgrade oracle RAC DB and clusterware from 11.2.0.1 to 11.2.0.3
a little about my existing architecture
EBS 12.1.3 on 2 node application tier and 2 node RAC DB
OS RHEL 5 64-bit
please help me on its documentation as i am not able to find much on metalink , there is no clear documentation to be followed.

Hi,
Please refer MOS tech notes:
*RACcheck 11.2.0.3 Upgrade Readiness Assessment [ID 1457357.1]*
*Before Upgrading to 11.2.0.3 Grid Infrastructure/ASM [ID 1363369.1]*
*Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 [ID 1058763.1]*
Also refer blogpost:
http://www.oracledba.org/EBS/upgrade/Upgrade_11gR1_RAC_EBS_R12_Database_to_11gR2_RAC.htm
Hope this should help :)
thanks,
Zaheer

Similar Messages

Upgrading from 9.0.1.3 to 11.2.0.4 with Oracle Workspace Manager

Our client has a (very old) 9.0.1.3 database on Windows 2000
This database (and other products – but that’s not the main concern right now) needs to be upgraded to 11.2.0.4 in Windows2008R2 (64 bit).
A complicating factor might be the use of Oracle Workspace Manager – a lot of tables are Workspace Managed.
We can do it the long way, by upgrading it via 9.1.0.4, 10.2.0.1, 10.2.0.4 -> Export and then, on the new environment, import on 10.2.0.4 en subsequently upgrade it to 10.2.0.5 and then 11.2 (and maybe some more patching afterwards).
But that takes way too long (downtime).
So would it be possible to do it the “easy way”:
Full Database Export of 9.0.1.3, import it into a brand new empty 11.2.0.4 and then upgrade Workspace Manager to 11.2 as well?
Or should we upgrade OWM to 11.2 in the old environment - and is that possible at all?
(FYI: Snippet from the OWM manuals : Workspace Manager supports the import and export of version-enabled tables in one of the following two ways: a full database import and export, and a workspace-level import and export through Workspace Manager procedures. No other export modes, such as schema, table, or partition level, are currently supported).
(On purpose cross-posted in the "Workspace Manager" Forum : Upgrading from 9.0.1.3 to 11.2.0.4 with Oracle Workspace Manager

The database is not that big (in fact there are two, both around 130Gb).
Affordable downtime is one weekend. The long way (with all patching and upgrading) takes around 100 hours...
We did raise an SR, but the answer was ... take the long way home ;-)
(But, FYI, I didn't raise the SR, so I don't know what question has been asked... If the original question was "how to upgrade", you get the official statement. If you don't ask for other options, you don't get them - so I ask it here...)
And I've seen that presentation... Thanks anyway.

How to upgrade DB node from 11.0.1.7 to 11.2.0.2 with EBS 12.1.2

How to upgrade DB node from 11.0.1.7 to 11.2.0.2 with EBS 12.1.2
Is Note 1367644.1: Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.2) (Doc ID 1367644.1) can solve this issue?
In this note, the instruction as:
Instructions for upgrading an Oracle E-Business Suite Release 12 database server and instance from Oracle 10g Release 2 (10.2.0), Oracle Database 11g Release 1 (11.1.0), or earlier versions of Oracle Database 11g Release 2 (11.2.0) to the latest version of Oracle Database 11g Release 2 (11.2.0).
Is this suitable for DB 11.0.1.7?
Thanks,
Jackie

How to upgrade DB node from 11.0.1.7 to 11.2.0.2 with EBS 12.1.2
Is Note 1367644.1: Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.2) (Doc ID 1367644.1) can solve this issue?
In this note, the instruction as:
Instructions for upgrading an Oracle E-Business Suite Release 12 database server and instance from Oracle 10g Release 2 (10.2.0), Oracle Database 11g Release 1 (11.1.0), or earlier versions of Oracle Database 11g Release 2 (11.2.0) to the latest version of Oracle Database 11g Release 2 (11.2.0).
Is this suitable for DB 11.0.1.7?The document is applicable and you can use it to upgrade the database from 11.1.0.7 to 11.2.0.2
Please note that you can upgrade to 11.2.0.3 (latest patchset certified with R12) as per (Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]).
Thanks,
Hussein

How Much $ is the Upgrade from CS5 for windows to CS6 for a small business with 3 users?

How much $ is the Upgrade from CS5 for windows to CS6 for a small business with 3 users?

Creative Suite 6
You'll still need to buy 3 licenses, of course...
Mylenium

After upgrading from Prosight V6 to V7.5 we are having issue with API's

Team,
Current version 6 of prosight upgraded to version 7.5. We are having our external webservice consumes Prosight webservice which defaulted installed under ProsightWS virtual directory. After up gradation we are running into issue in external application ,application unable to communicate to Prosight new version webservices. Fails in the time of calling in Login method itself in the psPortfoliossecturiy service.
Exception as follows:
“System.Web.Services.Protocols.SoapException: Could not create Security Token for specified User and Password at ProSight.Portfolios.WebServices.WS.psPortfoliosSecuritySOAP.Login(String sUser, String sPassword, Int32 lTimeOut) “
Our web application uses a dedicated user account to interact with Prosight webservice and it runs under windows authentication. Application build on ASP.NET 2.0 and later.
The sad part here is , our web application running perfectly with Prosight v6. :( I would appreciate if anyone could help us to resolve this issue. This is blocking our up gradation from 6 to higher version of prosight.
Thanks for your valuable time
Regards,
Jithesh

Here is the offical documentation from version 8.0 on the backward-compatability of the APIs. This document comes the version 8 installer. Not sure this helps you with the 7.5 issues, but hoping it will help:
Considerations for applications using the PPM Open API via COM
Applications which use the Primavera Portfolio Management (PPM) Open API via any interface (COM, SOAP/RCP or Document/Literal) and were developed and used with previous versions of PPM will continue to operate without the need for recompilation, as Primavera Portfolio Management 8.0 provides full binary backwards compatibility for all of the Open API interfaces. New functionality is available only to applications that are written to take advantage of such functionality.
Note however that any process can only load and use one version of the Microsoft .NET Framework. Therefore, applications developed with the .NET Framework 1.1 cannot use APIs to communicate with software developed using the .NET Framework 2.0 if this would cause the same process to need to load both versions of the .NET Framework.
This means that if any part of an application that uses the Open API which was developed using .NET Framework 1.1 communicates directly with PPM using the COM API (which is in-process), that part of the application would need to be recompiled to target the .NET Framework 2.0. If on the other hand, the application developed using .NET Framework 1.1, only communicates with PPM using SOAP RPC or Web Services (which are out-of-process) then there is no issue.
Instead of recompiling, it is usually sufficient to ”force” the existing executables to actually use the .NET Framework 2.0 instead of the native version of the .NET Framework for which they were compiled (1.1). This can be achieved by using an application config file with the following content:
<?xml version ="1.0"?>
<configuration>
<startup>
<supportedRuntime version="v2.0.50727" />
</startup>
</configuration>
The application config file can easily be created using Notepad or something similar. It does not need to be compiled in any way. It should be named with the exact same name as the executable file plus the suffix “.config”. For example: if the application executable file is called “Tester1.exe” then the config file must be named “Tester1.exe.config”. It must be placed in the same directory as the executable file.
The config file “forces” the application to use the .NET Framework 2.0, which would mean that even when using COM (in-process) Open API calls to PPM, there would still be only one version of the .NET Framework involved in the process (.NET 2.0).
----------------------------------------------------------------------------------------

UCM upgrade from 11.1.1.5 to 11.1.1.8 with all configuration?

HI guys
May be some one upgrading env from 11.1.1.5 to 11.1.1.8?
I observing issue with old configuration, I'm getting clean UCM.
After upgrade new UCM starting normally, but when I'm connecting to CS console it asking me that I already have old configuration which I want to submit or no. On this stage I submitting old configuration and in result after restart I'm getting fully clean UCM. All configuration have been removed.
Could some one explain how to upgrade it in correct way(and get old configuration workable) and prevent configuration from scratch.
Thanks

Hi ,
Ideally upgrade does not clean up the existing configurations . This is a pretty strange scenario that has come up on your environment . Can you please give some more details about your environment , architecture and topology .
Thanks,
Srinath

Upgrading from 7.5 to version 8: CEM and CCS problem with the EDMT

Hi All;
The current UCCE is 7.5 and some scripts and configuration for the CCS and CEM were already done, when I tried to upgrade for version 8 and I used the EDMT version 8 to upgrade the side_A database (logger Database), then an error message appeared which states that CCS and CEM is existed and it should be removed.
After checking, I discover that UCCE version 8 is no more supporting CCS or CEM scripts and configuration.
But, how I can resolve this problem as removing all the related configurations and all the related objects in the scripts and the scripts will be very hard and very complex ... what is the solution to overcome this problem?
I think there should be a proper method or solution from CISCO to resolve this problem.
Looking forward to hear from someone that can help me.
Regards
Bilal

Hi All;
The current UCCE is 7.5 and some scripts and configuration for the CCS and CEM were already done, when I tried to upgrade for version 8 and I used the EDMT version 8 to upgrade the side_A database (logger Database), then an error message appeared which states that CCS and CEM is existed and it should be removed.
After checking, I discover that UCCE version 8 is no more supporting CCS or CEM scripts and configuration.
But, how I can resolve this problem as removing all the related configurations and all the related objects in the scripts and the scripts will be very hard and very complex ... what is the solution to overcome this problem?
I think there should be a proper method or solution from CISCO to resolve this problem.
Looking forward to hear from someone that can help me.
Regards
Bilal

Upgrade from SAP 4.7 EE to ECC 6 while working with CRM 4.0

Hi All,
Presently we are using R/3 version 4.7 EE with CRM 4.0 and now we are planning to upgrade R/3 4.7 to ECC.6.0. My question is, are there any problems working on CRM 4.0 with ECC 6.0 and what are the limitation we face when we work on CRM 4.0 with ECC 6.0 ?. Please provide some inputs on this ASAP.
Thanks in advance,
J M.

Hi,
There is no problem to work on CRM 4.0 with ECC 6.0.
I am using from long time CRM 4.0 with ECC6.0
BR,
Darshan..

Upgrade from EDGE 3.0 -- EDGE 3.1: What to do with the new SAP transports?

Hello together,
we upgraded our EDGE 3.0 System to EDGE 3.1.
Also we upgraded the SAP integration kit.
Everything seems to work fine.
With the EDGE 3.1 Integration pack there are also new SAP transports included.
Now there are a few questions. Hope someone can help me with this
Do we have to import them?
Can we still use the "old" transports already imported in SAP?
Can we just "override" the "old" transports?
Is there an performance improvement (especially with WebI) with the new transports?
Thanks very much in advance!
With kind regards
Sebastian

Ingo,
If I do a fresh install of BOXI 3.1 Edge SP2...do I have to import the original transports or can I go directly to the SP2 "version" of the transports?
Thanks.
Kevin

Can I upgrade from 3.6.18 to 5 or need 4 first with mac 10.6.7 ?

Firefox keeps crashing after I have made an operating upgrade on my mac to 10.6.7. Currently on Firefox 3.6.18 and can I go directly to Firefox 5 or do I need to install 4 first?
Thank you!

For an unofficial Firefox 7 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
* http://www.macupdate.com/app/mac/37761/tenfourfox

Upgrading from Apex 3.2.1 (mod_plsql) to Apex 4.0 with Oracle Listener

Hi,
We have some applications developed in Apex 3.2.1 (which is mod_plsql) that have not been moved into Production yet. We are planning to upgrade to Apex 4.0 with Oracle Listener as soon as they are available (we don't want to turn on mod_plsql on any web server). What will be the migration process? Will my applications function and look the same when I open them in Apex 4.0? Will any functionality, formatting, etc. be lost?
I heard that there is a Migration Assistant but there is not much information available.
When Apex 4.0 and Oracle Listener will be released? Summer 2010?
I would appreciate all the information that you have about this.
Thanks,
Violeta

A new dedicated OTN Forum has been set up for the APEX Listener: ORDS, SODA & JSON in the Database
Please use this forum for all future APEX Listener posts.
Regards,
David

T410 Windows 7 Upgrade - from Win 7 Pro 32 to Win 7 Ultimate 64.

I purchased a T410 with Win 7 Pro 32 and am looking for the option to upgrade it to Win 7 Ultimate 64.
The shop in the country (Singapore) do not provide such option/customization.
Called tech support in the country without getting much info (they said they only support hardware).
Tried Lenovo shop in the country and they will only help to upgrade to Pro 64 with a charge, however without any recovery media (OS and drivers). I need Ultimate 64.
Browsed Lenovo site and couldn't find anything relevant.
Hope someone will give me the direction to upgrade from Win 7 Pro 32 to Win 7 Ultimate 64 (with all drivers).
- Hong
moderator edit: subject line adjusted for clarity

Dear Yannick Plavonil,
That discussion was started by me only on dell community and it was not resolved.
However if I upgrade can I revert back to Win 7, if something does not resolve or some of the devices
connected to the motherboard do not work?
Regards,
Ravi

Need information on how to upgrade from 10.5.8 to make computer compatable to iphone upgrade of 11.5.1

hi everyone: I require some information on how to upgrade from 10.5.8 to make my mackbook pro compatable
with the iphone upgrade. Please note that I have gone thru the upgrades on this computer and it tells me there are
no new ones available...... I need to get my upgrade past the 11.5.1 level.....so do I need to purchase a new
upgrade program....and if so which one...as I have been thru the apple store and so far as i can tell
the ones that are listed such as maverik, lion and snow lepard are not high enough.
To anyone who replies, thankyou so much for taking the time to help me. It is truely appreciated.

11.1.5 is likely to be the version of iTunes you are being asked to run, not the version of Mac OS X.
To get a higher version of iTunes, you likely have to upgrade Mac OS X. All Roads lead through the 10.6 Upgrade, available as a physical DVD only, from the Apple Online store for about US$20:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
This is one of the most benign Upgrades Apple has ever issued. The size of the Operating System gets smaller, performance is slightly faster, and very few Applications are left behind. If you have some older PowerPC Applications, you may need to ask to install the Optional Rosetta emulator for PowerPC code when you install.
Once your 10.6 install is fully Updated to 10.6.8 using Software Update, the Mac App Store will appear, and future upgrades (if needed) will be handled through variations of online purchases.

How do I upgrade from Lightroom 1 to 4 or 5?

I have registered my Lightroom 1, but it doesn't show as being registered in Creative Cloud. When I go to add the serial number, it says it's already registered and I can't add it. It's not syncing, even though my email addresses are the same. I figure there will be a cost involved from upgrading from 1 to any other version which I am okay with, but the only options I can find are to buy new, as it's not registering that I've paid for Lightroom 1. Or, because it's so old does it not matter and I just have to start from scratch?
I tried to do the online chat with Adobe, but it kept giving me an error on the page and pointing me to the forums.
Thank you.

I cannot make the decision for you about subscribing to the creative cloud. It's an excellent program, and it provides you access to the latest Photoshop and Lightroom. If you have installed Lightroom 5 as a trial version from the creative cloud then it will be necessary for you to uninstall that installation because it cannot be activated with a serial number. It is the same program, but it is licensed completely differently. If you really want to purchase Lightroom 5, then you can purchase it from the following website:
Products
Lightroom is toward the bottom of the page. You'll notice that it says that you can upgrade from $79. When you click on the buy Link you should be able to purchase an upgrade. When you do you will be sent instructions on where to download the program from, and you will be provided with your serial number.
If you decide to subscribe to the creative cloud then you won't have a serial number for Lightroom or Photoshop. Both programs are activated using your Adobe ID and password. And you won't need your Lightroom 1 serial number because you aren't purchasing an upgrade.

Tip for upgrading from MBP to iMac with Leopard & Parallels Boot Camp

Here are some pointers based on my recent experience upgrading from a MacBook Pro to an iMac, under Leopard and with Parallels using a Boot Camp partition for Windows.
First, you do not need to create a Windows partition on your new computer. You will use Boot Camp Assistant to do that - it can dynamically resize your existing Mac OS X partition without destroying it. (I initially used Disk Utility to create a Windows partition but it wasn't recognised properly by Parallels and also the Mac wouldn't boot from it).
A great way to simplify getting your old installation across is to make a Time Machine backup onto an external drive. Yes, you could also use start up your old Mac in Target mode (hold down T key when you start it), then start the new Mac and copy your settings over. But in my case, the new iMac (a refurb) came with Tiger installed on it while my old Mac had already been upgraded to Leopard.
I started the new Mac using a Leopard install CD (holding down the C key while starting). Then I chose to restore from a Time Machine backup instead of installing from CD, and soon had a functioning Leopard installation on the new Mac. Well, almost.
Next I used Boot Camp Assistant to create a Windows partition on the new drive. The old Mac's partition was only 10 GB in size, but I made the new one 31.9 GB in size (so I could stay under the Windows limit of 32 GB for FAT partitions). I then quit without installing Windows.
On the old Mac, I used an external drive formatted as FAT and used Disk Utility to 'restore' my Windows partition to the external drive. Next I plugged that drive into the new Mac, and restored the external Windows partition to the new Mac's Windows partition. So far, so good. However, Parallels would not start this installation of Windows, and the new Mac would not boot into it (holding down the Option key at start-up did not show me a Windows drive).
I tried doing a repair of the Windows installation using a Windows install disk but that did not work. What did work was the following: I booted from the Window install CD, then started a new installation. I asked Windows to format the Windows partition on the new Mac, then powered off the new Mac as soon as Windows started copying files. Next, I rebooted the new Mac into Mac OS X, started Disk Utility, and again did a restore of the Windows partition on the external drive to the Windows partition on the new Mac.
The final step was to reboot the new Mac into Windows directly so that I could load drivers from the Leopard install CD. [I haven't done that yet, so I'm not sure it's necessary].
Hope this helps!

Sounds solid to me. If the Glyph was connected on a firewire port that is. This would free up the bandwith that way but actually it is hardly an issue with the Duet considering the limited inputs. But using the Glyph as a backup for your projects is good wise idea anyway.

DB + grid upgrade from 11.2.0.1 to 11.2.0.3 with EBS 12.1.3

Similar Messages

Maybe you are looking for