DB Open fails with error
We have a 2 node replication enabled setup (master/client). Frequently I'm seeing that DB fails to open on the client with the following error logs:
[1387876299:345435][693/139824764127264] REP_UNDEF: Read in gen 8
[1387876299:345707][693/139824764127264] REP_UNDEF: Read in egen 6
[1387876299:345809][693/139824764127264] REP_UNDEF: EID 0 is assigned for site 2.0.0.1:4998
Finding last valid log LSN: file: 1709 offset 4018264
What would cause this frequent error?
We are using DB version 5.1.19 on RHEL 6.3, with these patches:
# Intends to solve locked sync
patch -Np0 <../21036_5.1.19_1.diff
# Intends to solve PANIC: log sequence error by replication aware logging
patch -p0 <../20342_5.1.19_1.diff
# Intends to solve haging passive
patch -Np0 <../21326_5.1.19_msghang2.diff
# Intends to solve PANIC: unpinned page
patch -Np1 <../19130-5.1.19.diff
# Intends to fix patch 20342_5.1.19_1.diff: log files not removed
patch -Np0 < ../21448_5.1.19.diff
# Intends to add repmg queue limit and statistics.
# In this patch, we modified the IN_QUEUE_LIMIT_BULK from 1000 to 100000
patch -p0 < ../21420_5.1.19sv_3.diff
# Intends to solve PANIC: file size not a multiple of the page size
patch -p0 < ../21254_5.1.19.diff
# Intends to improve performance by more accurate locks
patch -p0 < ../21454_5.1.19_prelim3.diff
# The patch to fix DB_NOTFOUND panic during initial synch process
# NOTE. This patch is incompatible with the diagnosic 21314_5.1.19_repdiag3.diff patch.
# the diagnostic patch 22451_5.1.19_repdiag4.diff must be used instead of 21314_5.1.19_repdiag3.diff
# if 20668_5.1.19_1.diff is applied.
patch -p0 <../20668_5.1.19_1.diff
Similar Messages
-
I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
The error messages I get are:
ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Help PLEASE!Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra -
Open command fails with error -10810
Switching from 10.4 to 10.5.3 I can no longer launch applications from the command line using the open command. For example:
some bloke's macbook$ open TextEdit.app
LSOpenFromURLSpec() failed with error -10810.
Seems to be some kind of permissions issue since it does work if I sudo open. Anyone know how to fix this?It's interesting, yogh's post above might be the reason it's failing for you.
Based on that post, I removed execute permissions from the TextEdit binary in /Applications/TextEdit.app/Contents/MacOS, then tried to use open to run the application. Here's what I get:
% open -a TextEdit
LSOpenFromURLSpec() failed with error -10810.
Now, it may be that the above error is generic and could be generated by several things, but as yogh suggested it may be something to check... -
Open -a "lmenaria.app" LSOpenFromURLSpec() failed with error -10810
Hello every one,
I have created a Java application for MAC, so I have configured .app. Its working fine. But now my friend got the issue while opening with double click on it, it just blink some times and failed to open.
When tried using open -a "lmenaria.app" then its shows error LSOpenFromURLSpec() failed with error -10810.
When it runs using command line, it works.
Go to "/Applications/lmenaria.app" directory and applied a command
java -jar Contents/Resources/Java/lmenaria.jar, the app starts up.
So what is the issue, Please let me know.
Thanks,
Laxmilalhttp://forums.macrumors.com/showthread.php?t=467307
Issue could be related to anything...the above thread is just one example. You might try running Application Monitor to see if there are multiple threads related to one app that have run amok...
It may be related to your friends computer/environment...try another computer. -
Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help
I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?
Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen -
TCP active open: Failed connect() Error: Connection timed out SMTP
Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSKThanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM -
SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.
Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssisHi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan -
premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?
Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update. -
Hi,
I have a ZyXEL NSA310 NAS device on my network that I use for backups (as well as a media server). I have been very happy with it as, amongst other things, it has a gigabit Ethernet connection. I recently upgraded my home laptop from Win7 Pro to Win8
Pro. Under Win7 the NAS device worked perfectly as the backup target. I could back up file sets and - most importantly to me - create a system image on the device should I need to restore the system in the event of a full disk failure.
When I upgraded to Win8 it kept the Win7 settings and it looked like it was just going to work, then as it came to create the system image it failed with error code 0x807800C5 and message "The version does not support this version of the file format".
I have searched the internet and seen that others have had similar issues on Win7 and Win8 with NAS devices where they have had to hack the device to get it working - though it isn't clear that this has been successful for everyone. This isn't an option
for me as the NSA310 is a closed device and in any event I don't see why I should have to hack the device when clearly this is a Win8 issue (since Win7 worked perfectly).
Does anyone have any ideas how to fix this issue so that I can create the full backups I require?
Thanks,
Phil
Event Log messages:
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 13/01/2013 23:14:52
Event ID: 517
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Home-Laptop
Description:
The backup operation that started at '2013-01-13T23:13:43.523158000Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a
solution, and then rerun the backup operation once the issue is resolved.
Log Name: Application
Source: Windows Backup
Date: 13/01/2013 23:14:56
Event ID: 4104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Home-Laptop
Description:
The backup was not successful. The error is: There was a failure in preparing the backup image of one of the volumes in the backup set. (0x807800C5).Thanks willis! I will look into the iSCSI route. A quick Google search and I can see some mention of the NSA310 and iSCSI so maybe it does support it.
One question: Have you ever attempted to restore a system image from a NAS iSCSI device with a Win8 Restore Disk? Is it easy? I just want to be sure that it is possible to do so in case the worst happens and I need to restore the entire image onto a
new disk.
Hopefully Microsoft will fix the issue with the standard NAS setup with an update in the future, but I don't want to wait for it.
Thanks again,
Phil
Hi Phil, No I have not had to do this yet, but I see no reason why it shouldn't work as the iSCSI disk looks just like a regular hard disk to the OS. I agree that Microsoft should fix the direct NAS support as the iSCSI approach does have the downside
of dedicating a fixed chunk of your NAS drive to the iSCSI disk that you have to choose when you create the disk whereas the direct NAS just uses the actual space currently needed by the backup. Also I had some trouble getting authentication (access rights)
to work so I left the iSCSI portal as open access - which is OK for a home solution but not a good idea in general. I will revisit this for my own setup and see if I can get it working but just wanted to mention it in case you have the same issue. It manifests
itself as not being able to connect to the iSCSI portal due to failed authentication when running iSCSI initiator setup.
-willis -
I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas???? -
SpamAssassin / Amavisd tuning - TCP active open: Failed connect() errors
I started this post as we were experiencing a problem with occassional delayed mail delivery to our mail store. As I continued writing it, I think that I've resolved it. But I wanted to post this anyway so if I'm doing things right it might help someone else; or, if I'm doing something wrong someone can correct me. :) For reference, we have a quad Sun v440, and process about 500,000 messages a day.
We were seeing messages like this in our log files:
09-Nov-2006 08:28:09.37 tcp_scan Q 1 [email protected] rfc822;[email protected] @tcp_scan-daemon:[email protected] TCP active open: Failed connect() Error: Connection timed out
example.com represents our local domain. The errors seemed to occur proportionally to the amount of incoming mail we received. That is, we saw more of them under load.
We are running SpamAssassin, Amavisd/clamav, and:
Sun Java(tm) System Messaging Server 6.2-5.01 (built Nov 22 2005)
libimta.so 6.2-5.01 (built 11:57:57, Nov 22 2005)
SunOS hostname 5.9 Generic_118558-11 sun4u sparc SUNW,Sun-Fire-V440
This line seems to say that the message is in the tcp_scan channel, and cannot send to 127.0.0.1:10024 (amavisd) because that port isn't listening.
My amavisd max_servers was set at 15. After reading http://www.ijs.si/software/amavisd/amavisd-new-magdeburg-20050519.pdf and making a wild guess, I increased it to 30. The errors were less frequent, but still occurred.
The output of 'sar -d' showed that my local disk was experiencing upwards of 80% utilization. I moved the amavisd temp directory and the spamassassin bayes db to a san volume, and that sped everything up dramatically. The connect errors went away, clamav avg time per message is at 4 seconds down from 10. I am now receiving errors from spamassassin that say:
Nov 9 10:27:27 hostname.example.com spamd[21601]: prefork: server reached --max-children setting, consider raising it
My --max-children is set to 25 right now, and the server is cpu bound under heavy load, so I see no reason to raise it.
So this is my setup. I am no longer having an immediate problem, but comments/questions are welcome.
Config files related to my setup are below.
Excerpts of imta.cnf:
! tcp_scan
[] $E$R${tcp_scan,$L}$U%[$L]@tcp_scan-daemon
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL destinat
ionspamfilter1 fileinto $U+$S@$D
ims-ms-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL saslswitchchannel tcp
auth maytlsserver maysaslserver missingrecipientpolicy 0 aliasdetourhost tcpscan-daemon
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL allowswitchchannel saslswitchchannel tcp_auth
maytlsserver maysaslserver missingrecipientpolicy 4 aliasdetourhost tcp_scan-daemon
tcp_intranet-daemon
! tcp_scan
tcp_scan smtp single_sys subdirs 5 notices 1 backoff "pt10m" "pt30m" "pt2h" "pt4h" dequeue_removeroute maxjobs 7 pool SMTP_POOL daemon
[127.0.0.1] port 10024
tcp_scan-daemon
option.dat:
SPAMFILTER1_LIBRARY=/opt/sunjes/SUNWmsgsr/lib/libspamass.so
SPAMFILTER1_CONFIG_FILE=/opt/sunjes/SUNWmsgsr/config/SpamAssassin
SPAMFILTER1_STRING_ACTION=data:,require ["addheader"]; addheader "Spam-test: $U"; require "fileinto"; fileinto "Junk";
SPAMFILTER1_OPTIONAL=1
dispatcher.cnf:
[SERVICE=SMTP-SCAN]
DEBUG=-1
PARAMETER=CHANNEL=tcp_scan
PORT=10025
IMAGE=IMTA_BIN:tcp_smtp_server
LOGFILE=IMTA_LOG:tcp_scan-server.log
STACKSIZE=2048000
INTERFACE_ADDRESS=127.0.0.1
SpamAssassin:
host=127.0.0.1
port=783
debug=0
mode=1
field=
verdict=Junk
USE_CHECK=0Suggest dropping Amavis in preference to the built-in
integration, per our documentation. Simpler, more
performant.Sorry, my title wasn't very accurate. We are running SpamAssassin through the built in integration, and clamav through amavisd. There isn't any built in integration to clamav, is there? -
TCP active open: Failed connect() Error: Connection timed out
Hi,
There is one message which can't be delieved to the recepient with error " TCP active open: Failed connect() Error: Connection timed out" This is the error that we found in the mail.log_current file.
I have no problem sending email to the same address from my hotmail account.
any suggestion ?
Thanks,
JoeThe message can only mean one thing. Your server cannot connect to that host.
It's possible that the remote system is lying to your Messaging Server, and that's gotten it confused. Some firewalls do this by repeating the entire capability string from the server behind them, but can't actually handle all the capabilities.
PIX firewalls do this.
When you connect, they pretend to be able to "startls", but if you try, they hang up. They appear to handle "EHLO", but when you try, they hang up.
You can put debugging on the tcp_local channel, and see the actual conversation, if you like.
master_debug and slave_debug go into the imta.cnf definition line. MM_DEBUG=5 goes at the end of your option.dat file.
then
imsimta cnbuild
imsimta restart
will attempt to send the message. You will want to back the changes out, as you'll get lots of extra log files you really don't need.
Post the log file, and we can see what's happening. -
Windows.Launch contract failed with error: The app didn't start..
We have installed windows 8 Prof X64 Edition; none of the Metro apps are not getting launched; the system is added in domain, the event viewer has the below information for one of the app.
Event Under: Applications
App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat did not launch within its allotted time.
Event Under: AppHost
The App Host has encountered an unexpected error and will terminate. The error is 0x8007000E.
Event Under: Microsoft-Windows-TWinUI/Operational
Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat for the Windows.Launch contract failed with error: The app didn't start..
Regards Ajinkya Ghare MCITP-Server Administrator | MCTSHi,
Try to put a machine disjoin the domain to see if the same issue occurs.
Sometimes the Windows 8 machines cannot use metro app once join the domain, you can try this method:
1- Open "Local Group Policy Editor"
2-Navigate to "Computer Configuration - Administrative Templates - Network Isolation"
3- Open "Internet Proxy Servers for Metro Style Apps" and set the value to your proxy server address like 172.16.0.1:8080.
Regards,
Leo
Huang
Leo Huang
TechNet Community Support -
REP-56071: Security check failed with error message: Error code30009 - Gene
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards. -
Hi,
We are running a Mountain Lion Server with Open Directory / LDAPv3, as far as I can tell. My responsibility is to get my CentOS 6.3 box running Samba v. 3.5.10-125.el6 to authenticate users against the ML / OD box. I can ssh to the CentOS box OK and I can get Guest access to the Samba share to go OK too. Also, the OD passwords on the LDAP server are set to 'Open Directory' so I guess that means that they are encrypted and the Samba server is set to send encrypted passwords. But when a user tries to properly authenticate using either say via a Mac client Finder [Command-K], or smbclient, the Samba server will generate this message:
check_ntlm_password: Authentication for user ['name'] -> ['name'] FAILED with error NT_STATUS_LOGON_FAILURE
(I am blanking out the user name on purpose).
Of course there is more to the story, but those are the basics.
Here are the relevant parts of my smb.conf. FWIW, the CentOS / Samba box is called Jupiter.
Thank you,
NickZ
[smb.conf]
[global]
display charset = UTF-8
realm = SATURN.MCLEAN.HARVARD.EDU
netbios aliases = ANL
server string = Welcome To The Jupiter Samba Server Version 3.5.10-125.el6
interfaces = lo, em1
security = SERVER
update encrypted = Yes
password server = saturn.mclean.harvard.edu
smb passwd file = /var/lib/samba/private/secrets.tdb
passdb backend = ldapsam:ldap://saturn.mclean.harvard.edu
passwd program = /usr/bin/passwd %u
unix password sync = Yes
lanman auth = Yes
client NTLMv2 auth = Yes
client use spnego principal = Yes
kerberos method = system keytab
log level = 2
syslog = 3
log file = /var/log/samba/log.%m
max log size = 50
name resolve order = host lmhosts wins bcast
server signing = auto
preferred master = Auto
ldap admin dn = uid=DirAdmin,cn=users,dc=saturn,dc=mclean,dc=harvard,dc=edu
ldap group suffix = cn=groups
ldap passwd sync = yes
ldap suffix = dc=saturn,dc=mclean,dc=harvard,dc=edu
ldap ssl = no
ldap user suffix = cn=users
usershare allow guests = Yes
idmap backend = ldap:ldap://saturn.mclean.harvard.edu
idmap uid = 10000-20000
idmap gid = 30000-40000
cups options = raw
[homes]
comment = Home Directories
read only = No
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No
[anl]
comment = Main ANL Share
path = /anl
read only = No
guest ok = Yes
hide dot files = NoTurns out a printer driver installed on an XP (even W2K(?)) was (apparently?) flooding the OS X SMB server to the point of collapse. Uninstalling the "HP Tools" part of the driver cleared it up. The printer is an HP LJ1300. I had downloaded the full driver from HP.com. I don't know if any/all these conditions need to be matched, but: the printer was on the network using an HP print server JetDirect EX Plus, and the computer(s) in question were connecting directly to it (not via a print server). It's been too long ago, but there were always several errors in the System Log (Win XP Event Viewer) that correlated with the errors on the OS X server.
Proud to say that since that day (10+ months ago) I've not seen it happen again. whew.
Maybe you are looking for
-
Trial balance report - general question
Hi, This is the first time that I am using the trial balance report (to compare it with a Discoverer report that was built for another purpose). If I am running a trial balance for the end of May, and an account has a payment due in June, then the ac
-
How can I rebuild my itunes library on my new computer that will include all my downloaded CD's. My new library only contains my purchased music,apps.books and movies, (My library on my old computer is scraped) The library on my ipod is intact. I don
-
When I email a newsletter as a pdf, the links don't work
I am creating a newsletter that I want to email out and I have some text linking to webpages. However, when I send it as a pdf, the links don't work. Do I need to send it as a Word document? I don't want to have to send a document that large. Is ther
-
Hello, I am expieriencing a weird behavior in the WLAN for guest users. I can create tipical guest users and it redirects me to the sign in web page (there is no web auth server, it's done by the WLC itself) and it works normally. But I am having sev
-
Example class that implements Serializable interface
Dear, I have a class myData that I want to implement Serializable interface. class myData has only two fields: Integer iData1, String sData2. Could anybody shown me how my myData class should be? Thanks a lot!