DB poller to poll the record by ordering the available records from the table

We are using DB Adapter poller to poll 50 records from table order by one column "EEVNT_ID".
The expected action is to sort the records in ascending order based on EVENT_ID from the table and then to return the first 50 records.
But the actual behavior noticed is, 50 records being picked randomly and then these records are being sorted in ascending order.
We identified this using the DB AWR report. Is there any way within the adapter to prioritize the execution in a way that it will sort the records first and then poll the first 50 records?
Any suggestions at the earliest would be much appreciated.
Many Thanks.

Similar Messages

HT1725 The files seems to be corrupted. To redownload the file, choose "Check for Available Downloads" from the Store menu.

While downloading apps from iTunes Store following error is repeatedly coming "The files seems to be corrupted. To redownload the file, choose "Check for Available Downloads" from the Store menu."? Please suggest any solution.

Contact itunes support.

Keep receiving the iTunes error: The file seems to be corrupted. To redownload the file choose "Check for available downloads" from the store menu.

I keep getting the above error. When I go through the store tab, I continue to get the same message. I found something about deleting the tmp file earlier today at another site but it was related to an older version of iTunes and was of no real help.
All I want to do is download the song I've been charged for.
Solutions?

Contact itunes support.

The file seems to be corrupted. To redownload the file, choose "Check for Available Downloads" from the store menu.

I keep getting this same error message regardless if I go through the check available downloads etc or just try to restart the download. Does anyone have a solution to this problem seeing as I have already been charged for the music.
Thanks...

Contact itunes support.

Pages and numbers will not take dictation and iOS 8. Very frustrating screen goes blank no keypad. I have to close the document In order to get rid of the big blank space where the keyboard should ber

Pages and Numbers will not take dictation in iOS 8 on my iPad 4 and iPad mini.
Very frustrating -screen goes blank where keyboard should be when I touch the microphone- no keypad & dictation does not record. I have to close the document In order to get rid of the big blank space where the keyboard should be. When is this going to be fixed?it's making recordkeeping Pages and Numbers, which I use heavily, almost impossible.
also dictation in other locations such as Mail put capitals in the middle of sentences and sometimes don't capitalize first letter in a sentence (see first letter of this sentence!) and other instances like the months of the year or the days of the week. Is anyone else having these problems?

Pages and Numbers will not take dictation in iOS 8 on my iPad 4 and iPad mini.
Very frustrating -screen goes blank where keyboard should be when I touch the microphone- no keypad & dictation does not record. I have to close the document In order to get rid of the big blank space where the keyboard should be. When is this going to be fixed?it's making recordkeeping Pages and Numbers, which I use heavily, almost impossible.
also dictation in other locations such as Mail put capitals in the middle of sentences and sometimes don't capitalize first letter in a sentence (see first letter of this sentence!) and other instances like the months of the year or the days of the week. Is anyone else having these problems?

I have an iMac 8.1, OSX 10.6.8 with XP running in Boot Camp partition. My USB keyboard (MB110LL/A) was damaged by water. I ordered a new keyboard from the Apple Store. I was sent model MB110LL/B. Special function keys will not work in XP. Any Ideas?

I have an iMac 8.1, OSX 10.6.8, Boot Camp 3.2 running Windows XP. My original keyboard (MB110LL/A) was damaged by a water spill. I ordered a new one from the Apple Store. They sent me MB110LL/B, function keys need updated drivers (Boot Camp 3.3) which will only install if Windows 7 is installed. I have a large amount of older software that runs under XP but not Windows 7. The Apple support team basically said "too bad". If they replace a keboard model with a new model, they should at least make it backwards compatable or provide a Boot Camp update that will allow this model to work on older iMacs. Reloading Bootcamp 3.3 several times has no effect because it does not detect Windows 7. Any Ideas or help would be appreciated.

It is free. It is beta. It works well - I use it on mine and two PCs as well...
MS Security Essentials will no longer install due to compatibiliity issues - that is the idea of a beta - and the RC could be out in June.
Windows 7 doesn't work great on any Mac, or Apple drivers, fan cvontrol to manage heat, and other issues.
Put 8 in and get to know it, then when the RC comes out you'll be ready

[svn:fx-trunk] 12878: When sub-components don' t have a tabIndex and when VideoPlayer instance does, assigned tabIndex to each inner-component to ensure that they appear in the correct tab order with other components on the stage .

Revision: 12878
Revision: 12878
Author:   [email protected]
Date:     2009-12-11 19:07:40 -0800 (Fri, 11 Dec 2009)
Log Message:
When sub-components don't have a tabIndex and when VideoPlayer instance does, assigned tabIndex to each inner-component to ensure that they appear in the correct tab order with other components on the stage.
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/VideoPlayerAccImpl.as

Michael,
"Michael Caughey" <[email protected]> wrote in message news:413f0af6$1@mail...
If I'm doing something wrong what is it? Obviously there is something
different about how I configured my environment a year ago.What happens if you bring down ms02?
Regards,
Slava Imeshev

Question for saving the parameters in order to reload them on the next run of the VI.

Hello,
I need your help if it is possible.
I have an application : Figure1.vi
For running this vi: first I choice the parameters which I'd like display,for example Courant Isa, Isb, etc..
and I click on the button Valider for display their respectives curves.
My question is I'd like to save the last parameters of displaying in order to reload them on the next run of the VI.
What is the method to save them?
I think that There are several ways of saving the parameters in order to reload them on the next run of the VI. For my particular case, someone say me that he would recommend usingan .ini file, which can be written using the configuration VI's on the file i/o palette.
I already See "Write Configuration Settings File.vi" and "Read Configuration Settings File.vi" in the Example Finder for an example of how to do this but I don't know what I must make in my application when I have a graph XY and a multi plot.
When I click on Enrgistrer:I'd like to save my parameters but when I clik on «Charger», I'd like to reload the last parameters whwen I save.
Can you help me, please ?
I send you my files,
Thannks a lot ,
Attachments:
Fig.zip ‏78 KB

Hello,
In your case it's perhaps better to use an XML file.
Connect everything you want to save into and array or a cluster, and then use the "Flatten to XML" and then, "Write to XML File".
Then in he beginning of you program, use "Read from XML file" and "Unflatten from XML", this should recover the data you previously stored in the file. Connect to the type input of the "Unflatten from XML" the type you created when saving (the array or the cluster of all your data).
Hope this helps,
Paulo

How can we take the cursor to a different sub-screen from the BADI?

Hi,
We have to do some validation on Header, Operation and Relationship of any work order (IW31, IW32). We have checked that validations can be done at BADI WORKORDER_UPDATE in the method u2018AT_SAVEu2019. But user wants us to take the Cursor back to the field and screen due to which the error is coming. How can we take the cursor to a different sub-screen from the BADI?
Thanks in Advance,
Pranav

You 'ran out of room' because you tried to put your entire question into what is the 'Topic line' of the post.
This is a fairly common error, as a scan of the topic list will show, and likely due to a design flaw in the layout of the composition page.
Most posters who make this error do so on their first post, and are able to avoid a similar misstep on their second and subsequent questions.
Regards,
Barry

Deployment Rule Sets do not properly launch the latest available version from the JRE6 family when the jpi-version is specified by the RIA

Issue Summary
In Java 1.7 Update 71, Java 1.7 Update 72 and Java 1.8 Update 25 Deployment Rule Sets do not properly launch the latest available version from the JRE6 family when the jpi-version is specified by the RIA. We've noticed this with Oracle Forms and Reports 11g where we have forms that specify Java 1.6 Update 20. We used to be able to specify Java 1.6 Update 26 in our Ruleset, but now the only version a that works in our ruleset is Java 1.6 Update 20 which is the same version requested by the JPI-Version attribute of the jar. The long term solution would be to upgrade Oracle Forms and Reports, however this isn't currently in the cards.
RuleSet.xml Test
Ruleset.xml
1
2
3
4
5
6
7
8
9
10
11
<ruleset version="1.0+">
<rule>
   <id location="*.javatester.org" />
   <action permission="run" version="1.6*" />
</rule>
<ruleset version="1.0+">
<rule>
   <id location="*.internaldomain.name" />
   <action permission="run" version="1.6*" />
</rule>
</ruleset>
Test 1 (Control)
Installed Java Versions:
– 1.7 Update 51 b13 (both x86 and x64 however x86 is invoked)
– 1.6 Update 26 b03 (both x86 and x64 however x86 is invoked)
Deployment Ruleset works as expected for both URLs
Test 2
Installed Java Versions:
– 1.7 Update 72 (both x86 and x64 however x86 is invoked)
– 1.6 Update 26 b03 (both x86 and x64 however x86 is invoked)
The RuleSet works for JavaTester.org however on internaldomain.name we get the following error:
With the trace logging turned on, I suspected the version attribute supplied by the RIA. I was able to trick Java by adding the following to my system deployment.properties file:
deployment.javaws.jre.0.product=1.6.0_20
deployment.javaws.jre.0.path=C\:\\Program Files (x86)\\Java\\jre6\\bin\\javaw.exe
deployment.javaws.jre.0.enabled=true
Because the RIA requests 1.6.0_20 it matches 1.6* from the deployment ruleset sooner than 1.6.0_26. However, if 1.6.0_20 is not available 1.6.0_26 should match according to the Deployment Rule Set documentation:
http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/security/deployment_rules.html
The version of the JRE that is used is determined by the following order of precedence:
1. The current version of the JRE is used if it is available and matches both the version attribute and the version requested by the RIA.
2. The latest available version of the JRE is used if it matches both the version attribute and the version requested by the RIA.
3. The current version of the JRE is used if it is available and matches the version attribute.
4. The latest available version of the JRE is used if it matches the version attribute.
If no version is available that meets the criteria, then the RIA is blocked, and a message is shown to the user. To provide a custom message, include the message element.
As a result:
If Java 1.6.0_20 is listed in the version requested by the RIA and 1.6.0_20 is listed in the deployment.properties file, #1 matches.
If Java 1.6.0_20 is listed in the version requested by the RIA, but 1.6.0_20 is NOT listed in the deployment.properties file the #1 SHOULD match, but doesn’t. It used to match up-to and including JRE 1.7 Update 51 however the ruleset appears to no longer match in subsequent versions.
#2 should never match with our current Deployment Ruleset. It would match if we specified 1.7* as a version in the Ruleset.xml.
#3 used to be broken as well after JRE 1.7 Update 51 however this bug has been marked as fixed. See: http://bugs.java.com/view_bug.do?bug_id=8032781
I have reproduced this issue with Java 1.7 Update 71, Java 1.7 Update 72, and Java 1.8 Update 25 when one of these versions are installed with Java 1.6 Update 26.

I can't seem to edit this post anymore, for some odd reason.
So here goes;
I found this post in NVIDIA's knowledge base;
When installing an after-market graphics card into a certified Windows 8 PC with UEFI enabled, the s...
The interesting parts in this post are as follows;
When an after-market graphics card is installed into a motherboard with UEFI enabled in the system BIOS, or if the system is a certified Windows 8 PC with Secure Boot enabled, the system may not boot.
UEFI is a new system BIOS feature that is provided on most new motherboards. A UEFI system BIOS is required in order for the Windows 8 Secure Boot feature to work. Secure boot is enabled by default on certified Windows 8 PCs.
In order to get the PC to boot with a graphics card that does not contain UEFI firmware, the end-user must first disable the secure boot feature in the system's SBIOS before installing the graphics card.
Note: Some system SBIOS's incorporate a feature called compatibility boot. These systems will detect a non-UEFI-enabled firmware VBIOS and allow the user to disable secure boot and then proceed with a compatibility boot. If the system contains a system SBIOS the supports compatibility boot, the user will need to disable secure boot when asked during boot process
This leads me to believe that the BIOS update that wrecked my setup was 9SKT58A/9SJT58A, which only contains one change;
"Adds support for updating BIOS from a WIN7 BIOS to a WIN8 BIOS".
I've just ordered a cheap UEFI-compatible GT640 from Gainward, so I hope I'll be able to try that out this weekend.

Can we get the raw materials for a classified Material from MSEG table?

Hi All,
Can we get the raw materials for a classified Material from MSEG table using Order number?
If yes How we can find it out for Past month only? As well how we can get the std price for this raw material.
Please help me out,
Thanks,
Ravi

Field STPRS (Standard price) From Table MBEW.
Kanagaraja L

How to remove available downloads from the list

how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu. I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Any suggestions? Using 10.6.7 and u

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu and I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Using 10.6.7 and up-to-date on all software. Any suggestions?

Could be a third party app preventing you from being able to login.
Mac App Store: Sign in sheet does not appear, or does not accept typed text
If it's not a third party issue, follow the instructions here.
Quit the MAS if it's open.
Open a Finder window. Select your Home folder in the Sidebar on the left then open the Library folder then the Caches folder.
Move the com.apple.appstore and the com.apple.storeagent files from the Caches folder to the Trash
From the same Library folder open the Preferences folder.
Move these files Preferences folder to the Trash: com.apple.appstore.plist and com.apple.storeagent.plist
Same Library folder open the Cookies folder. Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the MAS.

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Not via Time Machine. It cannot back up from a network location.
The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
EDIT: And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port. Second TC not required.
Message was edited by: Pondini

HT1725 When I click on a Movie I get the following "You have already purchased this item but it has not been downloaded. To download it, select Check For Available Downloads from the Store menu." Then get err = 11111

iTunes quit unexpectedly during the download of a movie. When I click on that movie now I get the following message: "You have already purchased this item but it has not been downloaded. To download it, select Check For Available Downloads from the Store menu."
I follow the instructions, but the download still doesn't resume - err = 11111
Any advice?

Yeah, I am going to blast my iPhone for the 4th time today and pray this goes away. I had 6 apps showing updates, the 6 badge icon shows on the App Store on my iPhone and, having run them all, the 6 apps have two copies each on my iPhone: one that is the old version of the app and will not run and the other is a faded version of the app with an empty progress bar on the icon. Click those and you get an error message about connecting to iTunes, etc. as described in the article I linked to above.
It gets stranger than this. If I install a completely NEW app, the 6 that are stuck mid-update heal themselves and appear with the new version only, however now completely different apps (Hold Em for instance - which I did not update and didn't need an update) will not launch "app name Cannot Launch" message comes up.
Agh!

DB poller to poll the record by ordering the available records from the table

Similar Messages

Maybe you are looking for