DBCC CHECKDB found 4 consistency error in the database

One of the pages has been overwritten. It is index I'd 1 which is the clustered index. The clustered index contains the underlying data, so you must restore it.
What recovery model is the data as using, and how do your backups look? Do you clean backups without corruption in them? Do you all of the log backups since that good backup?

Our database has encounter some issues that is running on SQL server 2005.
As I have read, the first steps to fix any corruption is run 'DBCC CHECKDB with ALL_ERRORMSGS, NO_INFOMSGS' and I do same. Here is the output of DBCC CHECKDB: Msg 8928, Level 16, State 1, Line 1Object ID 1429580131, index ID 1, partition ID 72057598907908096, alloc unit ID 72057598960730112 (type In-row data): Page (1:235150) could not be processed. See other errors for details.Msg 8941, Level 16, State 2, Line 1Table error: Object ID 1429580131, index ID 1, partition ID 72057598907908096, alloc unit ID 72057598960730112 (type In-row data), page (1:235150). Test (sorted [i].offset

Similar Messages

Workspace Error 8001: The Database Connection could not be found

We had to reboot all our windows servers recently and since then all the database connections in the database base manager in workspace are gone.
I can see all the existing reports but cannot use any of them as I dont have any connections.
Also I cannot create any new connections
I get the error 8001: The Database Connection could not be found: 13cbd63_12b5e2a8b73_-7f8f when I try to create a new connection.
Not sure what the problem is.
Any suggestions?

Hi Pat,
It loks like your Biplus relational DB is corrupted, try with those steps:
1. De-register BI+ from Shared Services (Config Utility->Hyperion Reporting and Analysis > Deregister from Shared Services)
2. Configure against the backup database (Drop and recreate tables option).
3. Re-register BI+ with Shared Services.
4. Re-deploy BI+.
5. Test Workspace and add new connections.
Regards.

Getting this Error: There was an error opening the database for the library

I keep getting an error with start up (There was an error opening the database for the library). The command + option - double click does not provide options for database rebuild or repair, just the same error message.
I have been using Aperture 3 since it was released without problems until now. The library size is about 450GB.
Has anyone found a file or something within the library that was corrupt? Or any manual method to fix the issue?

I have had the same problem as you have had, but I managed to restore. After having upgraded to 3.1, Aperture performed a irreversible update of the library. I then made a backup to a vault (which also was was updated). So far so good. A few days later when opening Aperture I got again the dialoge box saying Aperture had to update the library to 3.1 - and then came the error message. When trying to open the backup vault directly, I got the same message.
What I did was opening another library (creating a new one will also do). Aperture was now in a state where it was running with a few pictures in the library. I then performed a vault restore from the 3.1 backup. Fortunately, this did the job.
I actually taught that both the library and the vault was corrupted, and I am really happy that I managed to restore. Tomorrow I am going out to buy several new hard disks for my new multiple vault backup strategy to cope with the new threat: Aperture library self-corruption.

Inbound-Queue SYSFAIL: SQL error in the database when accessing a table

Hi,
we send around 80 IDoc simultaneously, there 15 are stuck.
They all have SYSFAIL in SMQ2 with message: SQL error in the database when accessing a table
I already unlocked the queues and try to resend. Nothing happend!
I ran RSQIWKEX for the single queus but now there are new queues in Status SYSFAIL.
I already checked some entries in forum and blogs, but nothing worked out yet!
Can someone help?! it's urgent!!
br

Hi, well as mentioned i searched and found this already.
But in ST22 i got error concerning
Laufzeitfehler DBIF_RSQL_SQL_ERROR
Ausnahme CX_SY_OPEN_SQL_DB
So i guess it's something more serious.
Any more ideas?!
Can i simply delete the stucked queues and reporcess them?!
br

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

"There was an error opening the database for the library "~/Pictures/Apert"

Hey everyone,
There's already another discussion thread about this at the link below, but the problem was never actually resolved. http://discussions.apple.com/thread.jspa?threadID=2343014&tstart=0&messageID=116 67261#11667261
So I stumbled across this problem where Aperture 3 will display the following error when opening the image library.
There was an error opening the database for the library “~[path]/Aperture Library.aplibrary”.
One user suggested navigating to the actual library, and ⌘⌥-clicking the library to open it with the Aperture Library First Aid dialog. This however, did not work for me. I still received the error messages upon ⌘⌥-clicking the library.
Here's a little hack I discovered for those of you still struggling. It doesn't fix the problem (leaves quite a large dent remaining actually), but hopefully someone can cultivate what little I discovered.
⌥-click Aperture (not the library)
You should get to the library selection dialog box. Create a new library (bottom right corner) and remember the location of the new library. Put a few random pictures in the new one.
Close Aperture
⌃-click both the old and new libraries and "Show Package Contents."
Open the folder "Database" in both libraries.
Cross check the folders to see if the old library is missing files that are in the new library. If your old library is missing some files (mine was), drag the missing files from the new library to the old one.
Close both folders.
⌘⌥-click the old library.
NOW, I got the Aperture Library First Aid dialog.
Rebuild the library (3rd option)
Wait a while.
Aperture should open up with a folder named "Recovered Folder." Within this folder will be a SINGLE project named "Recovered Project" with ALL the images from your old library. There may be a few albums there too, but mine were all empty so it didn't matter in my case. To my knowledge, I lost all the adjustments I performed too.
This is as far as I got. I have much of my library backed up, so I only needed to copy the most recent photos into the backup. I am NOT reorganizing and re-editing pictures in this one!
As Aperture is a photo-organizing and photo-editing software, I understand that this by no means fixes the problem, since you lose all organization and editing. But it enables one to at least view the images lost. Hopefully a more knowledgable hacker else can figure out how to fix this completely. Unfortunately, I simply don't have the time to continue messing with this.
Good luck to anyone else having issues! I understand the frustration you must be facing, its freaky having years worth of images simply disappear! After this incident, I'm definitely going to configure Time Machine to perform more frequent backups, since my latest backup was already a couple weeks old.

Hey All,
To my horror I have a similar problem and your solution didn't seem to help. To be specific, I get the error:
"There was an error opening the database for the library “~/Pictures/Aperture Library_2.aplibrary" Everytime I try to run Aperture. This happened because my Apple computer shut off completely (due to bad battery) while importing photos from a memory card.
I've tried "option + command" while clicking the aperture application and that gave me the same error message without any other option except to quit the program. I tried "option + command" and clicked the library package but that didn't work either. I tried creating a new aperture library, opening it which I did successfully, and then switching to my main one but that didn't work.
Does anyone know away to get it to work again and have the edits still there?
I'm a professional photographer and have thousands of photos or so in the library so this is distressing. The master files for the photos are located on an external hard drive, but I'm not sure how to access them in aperture. Are all the edits on the photographs are in the external hard drive or the aperture library. Is there any other way to resolve this issue without losing the edits?
Does apple have a support number I can call? Any help would be greatly appreciated!!

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library "~/Pictures/Family IIi.aplibrary". Please help, thanks

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks

Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics

SQL error in the database when accessing a table.

Hi,
I got below error at production server. Please suggest how to reslove this error.
 
 
 
Runtime Errors DBIF_RSQL_SQL_ERROR
 
Exception CX_SY_OPEN_SQL_DB
 
Date and Time 02.01.2011 15:55:06
 
 
 
 
 
Short text
 
SQL error in the database when accessing a table.
 
 
 
How to correct the error
 
Database error text........: "[10054] TCP Provider: An existing connection was
 
forcibly closed by the remote host.
 
[10054] Communication link failure"
 
Internal call code.........: "[RSQL/INSR/SWFCNTBUF ]"
 
Please check the entries in the system log (Transaction SM21).
 
 
If the error occures in a non-modified SAP program, you may be able to
 
find an interim solution in an SAP Note.
 
If you have access to SAP Notes, carry out a search with the following
 
keywords:
 
 
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
 
"CL_SWF_CNT_FACTORY_SHMEM======CP" or "CL_SWF_CNT_FACTORY_SHMEM======CM001"
 
| "ADD_INSTANCE"
 
 
 
Information on where terminated
 
Termination occurred in the ABAP program "CL_SWF_CNT_FACTORY_SHMEM======CP" -
 
in "ADD_INSTANCE".
 
The main program was "SAPMSSY1 ".
 
 
In the source code you have the termination point in line 16
 
of the (Include) program "CL_SWF_CNT_FACTORY_SHMEM======CM001".
 
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
 
procedure "ADD_INSTANCE" "(METHOD)", but it was neither handled locally nor
 
declared
 
in the RAISING clause of its signature.
 
 
The procedure is in program "CL_SWF_CNT_FACTORY_SHMEM======CP "; its source
 
code begins in line
 
1 of the (Include program "CL_SWF_CNT_FACTORY_SHMEM======CM001 ".
 
 
 
 
Source Code Extract
 
 
Line
SourceCde
 
 
1
METHOD add_instance .
 
2
 
3
data: ls_id type swfcntbuf.
 
4
 
5
check buffer method - store in local buffer if necessary
 
6
retcode = cl_swf_cnt_factory=>add_instance( ibf_por = ibf_por instance = instance ).
 
7
 
8
CHECK m_buffer_method EQ mc_buffer_shared.
 
9
 
10
append key to list of tasks to add stored in database table SWFCNTBUF
 
11
will be evaluated by build process for shared memory area (UPDATE_BUFFER method)
 
12
 
13
ls_id-mandt = sy-mandt.
 
14
ls_id-id = ibf_por.
 
15
 
>>>>>
INSERT swfcntbuf CONNECTION r/3*wfcontainer
 
17
FROM ls_id.
 
18
 
19
IF sy-subrc EQ 0.
 
20
Commit seems to be necessary always, even if INSERT has failed, to get rid of
 
21
database locks
 
22
COMMIT CONNECTION r/3*wfcontainer.
 
23
ENDIF.
 
24
 
25
ENDMETHOD.
 

duplicate here SQL error in the database when accessing a table.
Do not post the same question in more than on forum.

DBIF_RSQL_SQL_ERROR with SQL error in the database when accessing a table.

dear all,
i have done a system copy from production server into quality server. quality was scrapped and freshly installed with SAP then used the DB flush method to carry out the system copy. i had to change the DBS_ORA_SCHEMA in environment variables to SAP<SOURCE SID> from SAPSR3. the sap version is ECC6.0,DB is ORACLE10.2 on WIN NT.
after MMC opened, i get "SQL error in the database when accessing a table" error is coming. in SM21, I am getting "Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000 )
Database error 8103 at SEL access to table TBTCO
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error 8103 at FET access to table TBTCP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
Delete session 001 after error 023
Database error 8103 at DEL access to table TMSALOGAR
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Database error 8103 at FET access to table SNAP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Transaction Canceled SY 002 ( SQL error in the database when accessing a table. )
Database error 8103 at FET access to table TSP02"
please find the st22 DUMP:
ow to correct the error |
Database error text........: "ORA-08103: object no longer exists"
Internal call code.........: "[RSQL/READ/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPMSSY2" or "SAPMSSY2"
"INITIATE_JOB_START"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INITIATE_JOB_START" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
|
please do me this favor if you know to avoid this problem..
thanks a lot..

Hello Anuj,
This is because the COUNT(*) is returning a value which is longer than the INT4 data type it is expecting. If you restrict the selection by introducing a WHERE clause, then you won't get the dump:
DATA: dyn_from TYPE string,
 dyn_where TYPE string,
 gx_sql_err TYPE REF TO cx_sy_open_sql_error,
 gv_text TYPE string.
dyn_from = `DD01L INNER JOIN DD02L ON DD02L~AS4LOCAL = DD01L~AS4LOCAL AND DD02L~AS4VERS = DD01L~AS4VERS`.
dyn_where = `DOMNAME LIKE 'Z%'`.
TRY .
 SELECT COUNT(*) FROM (dyn_from) WHERE (dyn_where).
 WRITE: / sy-dbcnt NO-GROUPING.
CATCH: cx_sy_open_sql_db INTO gx_sql_err,
 cx_sy_dynamic_osql_semantics INTO gx_sql_err,
 cx_sy_dynamic_osql_syntax INTO gx_sql_err.
ENDTRY.
IF gx_sql_err IS BOUND.
gv_text = gx_sql_err->get_text( ).
WRITE: / gv_text.
ENDIF.
BR,
Suhas

Loading issue : Error: sql error in the database while accessing a table

Hello,
where as one of the DTP in the process chain failed due to *Error: sql error in the database while accessing a table*, where as in the short dump it showing as Transaction log of data base is full., but i checked the data base space in DB02, more space is available . once we run the same DTP by manually its successful. its not through any errors.
could u please help me out solve the problem.
Thanks
siva kumar.

it might be a lock. do you drop index before loading?
the database might be full at the moment of loading and not later if many loadings happen at the same time on the same system...
when you then rerun your dtp manually, it can go through as it's perhaps the only one running at that moment...
you can try to set the btch parameter to 1...this will help in some cases.
M.

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane

I downloaded Aperture and now I'm getting a "There was an error opening the database for Library " and I can't do anything else. How can I fix it so I am once again able to run Aperture?

I Downloaded Aperture from the Apple Website then proceeded to download all my picture's frp, IPhoto. The very next time I opened Aperture an error poped up stating, There was an error opening the database for Library "blank". I can't do anything with the program but hit the cancel buttom which closes the program. How do I fix it?

Is "blank" the name of your Aperture Library? If not, then Aperture is pointing to the wrong Library. Hold down the option (⌥) key while you launch Aperture by clicking it in the Applications Folder. Then select the correct library and press the "choose" button.
If that does not help, try to repair your library:
Locate Aperture library in Finder. Holding down the keys option (⌥) +command (⌘) and double click on Aperture Library to show the First Aid dialogue:
Then try to start Aperture again. If that also should fail, try the other steps in Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
Good Luck
Léonie

I just found an error in the file name for my Camera Raw Cache file. How do I correct it?

I just found an error in the file name for my camera raw cache file. The error is in my username. I don't know how to correct the error or if I should just leave it. I'm not sure where my cache file is stored on my computer. Any help would be appreciated.
Thank you

Since you are on a Mac if when you first set up your account you left out the i in Wilson nothing you do will change that. The REAL account name will always be alicewlson. Once an account is created you can't actually change the name of it. You can change the name that is displayed but not the REAL account name.
Simplest thing to do is stop worrying about it. Everything is as it should be, that is except Wilson being spelled without the i.
Lilac50 wrote:
When I searched finder for "alicewlson" I found a long list of files like this:
2014-07-22 12.50/File005.nef[15:16:35.212] (debug) src/ImageLoader.cpp:363: File: /Users/alicewlson/Recovered/2014-07-22 12.50/File002.nef[15:18:02.173] (debug) src/StoreXMLFile.cpp:21: /Users/alicewlson//.rpro/rpro.cfg
I believe I made the error in my user name when I first got my computer a year ago. I then corrected it under my user name but not in my Lightroom files. I also looked for files with a .lrdata extension and didn't find any.

Error message "There was an error opening the database for the library"

I am getting the following error when I try to open my Aperture today: "There was an error opening the database for the library “/Users/xyz/Pictures/Aperture Trial Library.aplibrary”".
I tried doing Option-Cmd while double clicking Aperture, but I can't get to the restore screen. I also tried to use Time Machine to restore the library and am still getting the error. Is there a different way to get to the restore screen??

Someone posted in another thread that they needed to create a new library and import the old one in.

Error opening the database for the library "~/Pictures/Aperture Trial Library.aplibrary" error message

When starting up Aperature 3 I get the following Error Message :
"There was an error opening the database for the library “~/Pictures/Aperture Trial Library.aplibrary”.
I can't di a thing except Quit. I have restored from Time Machine and reloaded the Software from Disk. Still get the same message. Any suggestions Are appreciated.
Jim

Hello Jim,
I assume you trial Aperture Library is in your "Pictures" folder? Try to rename it to something like "OldApertureTrialLibrary.aplibrary", to force Aperture to create a new Application Library.
To rename the old Trial Library, select it in the Finder and enter Command(⌘)-I (short for File-> Get Info). Click on the file name text field and enter a new name.
Possibly you get this error message message, because there is some permissions problem. If you are not allowed to rename the file, click on the padlock in the lower right corner, authentificate as admin and give yourself read/write access to the trial library (in the "Sharing & Permissions" brick of the "Get Info" panel).
Post back, if your "ApertureTrialLibrary.aplibrary" contains valuable images that you would like to save or if this does not work and you need further advice.
Regards
Léonie

DBCC CHECKDB found 4 consistency error in the database

Similar Messages

Maybe you are looking for