DBM_EXECUTE command timeout exceeded

Hello All,
When i am excuting any db t-code from my system ,
i am gettting DBM_EXECUTE command timeout exceeded.
I have tried it with different user but facing the same problem.
kindly let me know the sloution for this.
Thanks in advance,
Atul

Hello Atul,
if you don't find a solution in the SAP notes then you should open a customer message.
SAP support will then logon to your system and analyze the problem.
Best regards,
Melanie

Similar Messages

How to set command timeout for table object?

I have a report that is generating an error during rendering in a CrystalReportViewer control (v10.5). The error is "Failed to open a rowset." which appears to be caused by a timeout. I'm currenlty setting the connection info and location of the sproc programmatically. How can I set the command timeout as well? Can I set this via the Attributes collection of the ConnectionInfo object? (This appears to be a command timeout, not a connection timeout, which I'm already including in the Attributes collection of the ConnectionInfo object and setting at 15 seconds. I've tried making this as much as 60 seconds but it doesn't change the behavior.)

The error message includes text that states the timeout was exceeded (in bold below)...
CrystalDecisions.CrystalReports.Engine.InternalException: Failed to open a rowset.
Details: ADO Error Code: 0x
Source: Microsoft OLE DB Provider for SQL Server
Description: Timeout expired
SQL State: HYT00Error in File J:\DOCUME1\ADMINI1\LOCALS~1\Temp\SpecificationSummaryReport {42EDFEA3-DD0D-4F5E-BC0B-F9CC1126A872}.rpt:
Failed to open a rowset. ---> System.Runtime.InteropServices.COMException (0x800002D3): Failed to open a rowset.
Details: ADO Error Code: 0x
Source: Microsoft OLE DB Provider for SQL Server
Description: Timeout expired
SQL State: HYT00Error in File J:\DOCUME1\ADMINI1\LOCALS~1\Temp\SpecificationSummaryReport {42EDFEA3-DD0D-4F5E-BC0B-F9CC1126A872}.rpt:
Failed to open a rowset.
1) Is there a Service Pack for CR 10.5??? That is the runtime that is in use - not XI.
2) The report viewer app is in version 10.5 (as mentioned in the first post) but the report was created in the designer for version 11. Before we assume that is a problem - I have other reports created this way that work fine.
3) The data source is SQL 2005.
4) The connection type is OLE DB - Microsoft OLE DB provider for SQL Server.
I think the issue is due to corruption in the report file. I've seen this many times with reports (over the last 10 years). I've had reports that refuse to work but if I recreate them from scratch the new report works fine. In fact, I've recreated the data portion of this report (using the same sprocs) and that one works.

IO Exception: Lock timeout exceeded for documents , wait time = 60014

Hi,
We are getting an error while uploading any document on portal in KM content area. The full error details as follows
#D27E2001B003002500000D210005D0D20004520E6FF2B6FB#1216121868039#com.sapportals.wcm.repository.service.accessstatistic.AccessStatisticManager#sap.com/irj#com.sapportals.wcm.repository.service.accessstatistic.AccessStatisticManager#BMERRON#71986##<host name>_7664450#BMERRON#3f730c80526211ddb0fcd27e2001b003#SAPEngine_Application_Thread[impl:3]_4##0#0#Error##Plain###error while handling event - com.sapportals.wcm.WcmException: IO Exception: Lock timeout exceeded for <documents>, wait time = 60006
     at com.sapportals.wcm.repository.service.appproperties.PropertiesService.setProperty(PropertiesService.java:984)
     at com.sapportals.wcm.repository.service.appproperties.PropertiesService.setProperty(PropertiesService.java:1203)
     at com.sapportals.wcm.repository.service.appproperties.PropertiesManager.setProperty(PropertiesManager.java:176)
     at com.sapportals.wcm.repository.service.accessstatistic.AccessStatisticManager.updateLastReadDate(AccessStatisticManager.java:177)
     at com.sapportals.wcm.repository.service.accessstatistic.AccessStatisticManager.received(AccessStatisticManager.java:253)
     at com.sapportals.wcm.util.events.ReceiverEntry.doSend(ReceiverEntry.java:223)
     at com.sapportals.wcm.util.events.EventBroker.send(EventBroker.java:86)
     at com.sapportals.wcm.util.events.TransactionalEventBroker.send(TransactionalEventBroker.java:56)
     at com.sapportals.wcm.repository.manager.ResourceEventBroker.send(ResourceEventBroker.java:219)
     at com.sapportals.wcm.repository.manager.AbstractRepositoryManager.sendEvent(AbstractRepositoryManager.java:322)
     at com.sapportals.wcm.repository.RMAdapter.sendEvent(RMAdapter.java:342)
     at com.sapportals.wcm.repository.ResourceImpl.sendEvent(ResourceImpl.java:4206)
     at com.sapportals.wcm.repository.ContentImpl.getInputStream(ContentImpl.java:119)
     at com.sapportals.wcm.repository.ContentImpl.getInputStream(ContentImpl.java:132)
     at com.sapportals.wcm.service.xmlforms.transformation.ResourceDemultiplexer.getContentStream(ResourceDemultiplexer.java:71)
     at com.sapportals.wcm.service.xmlforms.transformation.Transformation.render(Transformation.java:209)
     at com.sapportals.wcm.app.xmlforms.PreviewServlet.sendForm(PreviewServlet.java:165)
     at com.sapportals.wcm.app.xmlforms.PreviewServlet.doGetAction(PreviewServlet.java:130)
     at com.sapportals.wcm.app.xmlforms.XFBaseServlet.doGet(XFBaseServlet.java:241)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sapportals.wcm.app.xmlforms.XFBaseServlet.service(XFBaseServlet.java:134)
     at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:333)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
     at java.security.AccessController.doPrivileged(AccessController.java:242)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Any Help?
Regards,
Sree

Hi sreedhar Gunda,
Check whether the repositories are in active and running mode or not. If they are running fine. then check the authorization is sufficient from BASIS people.
points if useful
Thanks
Suresh

Set Command Timeout For SQL Server

Hello,
How do you set the command timeout for the 'open' statement? I am running a Database via SQL Server and I tried the dialog box timeout statement (the check box on the advanced tab) and simply get an error. The manual shows a 'step.commandtimeout' but how is it implemented?
Thanks,
Kevin

Kevin -
I looked at the internal implementation of the CVI SQL Toolkit. The toolkit function that the step type uses is DBNewSQLStatement. Internally to the toolkit the function opens a recordset instead of a command object. The command timeout attribute is only available on a command object and not on a recordset object, so as implemented inside the toolkit the error is appropriate. I think the toolkit could have used a command object to create the recordset object and this would allow the toolkit to let you set the timeout attribute. Unfortuneately this is not the way it was done.
For the future I may investigate to see if there is a way to bypass this limitation by using different toolkit functions, but I am not sure if there a
re any side effects.
Scott Richardson (NI)
Scott Richardson
National Instruments

ATA command timeouts after disk has gone sleeping

Hi all
I've configured myself a NAS, which is infrequently accessed, so I set the standby timer of the disks to 241 (30 minutes) using hdparm.
for i in /dev/sd?; do
hdparm -S 241 $i > /dev/null
done
After 30 minutes the disks go to sleep, no problem there, but once they are accessed again, the first command sent to the disk time out:
ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata7.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
res 40/00:00:00:f1:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata7.00: status: { DRDY }
ata7: hard resetting link
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: max_sectors limited to 256 for NCQ
ata7.00: max_sectors limited to 256 for NCQ
ata7.00: configured for UDMA/133
sd 6:0:0:0: timing out command, waited 7s
ata7: EH complete
SCSI device sdg: 1953525168 512-byte hdwr sectors (1000205 MB)
sdg: Write Protect is off
sdg: Mode Sense: 00 3a 00 00
SCSI device sdg: drive cache: write through
After that the drives work fine again. The command timeout is 7 seconds, which seems too low because the disks need some time to spin up.
Two questions:
Can the ATA command timeout be increased?
If the command fails, is it retried?
Thanks,
Glenn

The G5 Discussion is here while this is devoted to Mac Pro, hence the confusion. The MP doesn't use cables, just trays that slide in.
Is it possible you have backups you can boot from? (hint, hint). Or Disk Warrior 4? would also be 'nice.'
Hard restarts DO trash files and directories. And never make changes w/o a bootable backup. Maybe a couple FW drives. (One person yesterday backed up his problem G5 drive only that turned his 'good backup' into an unbootable drive also, and didn't have a 2nd backup - which can happen and why you don't want to rely on just one).

Admin Command Timeout

My streaming server 3 hanged last night and can be restarted.
I found that the admin logs have thousands of line like the
following:
2008-12-22 03:20:15 236 (e)2671287 Admin Command Timeout:
(Command (getServerStats) timed out.) -
2008-12-22 03:20:15 236 (e)2671287 Admin Command Timeout:
(Command (getVHostStats) timed out.) -
How can I solve this problem? Restart the computer helps, but
I wonder there is a way to solve it.

Well, really, none of these problems should happen! But,
sadly, they do and not just for me.
A Google search will show that these Admin timeouts are a
very common problem but no-one seems to have a solution. More
worryingly, I have never seen any suggestion from Adobe about what
might cause them.
Since my original post I have made two changes to our app:
(1) when the 'owner' of the room leaves I unload the instance
(after a 30 seconds delay)
(2) I amended the application.xml for this app to timeout
idle connections after 2 minutes (the default is no timeout)
This has made things slightly better in that the app now runs
for 2/3 days without failing (rather than failing twice a day).
But, it still fails and the only thing that brings it back is a
reboot of the server which is totally unacceptable in a live
environment where we usually have 500+ clients watching 100 live
streams at any one time (many on a pay-per-minute basis). The only
other significant thing I notice now is that once the machine has
been running for a couple of days the logging stops completely for
some (but not all) instances i.e. nothing is displayed in the admin
console and nothing is written to the log files. It's as if the FMS
Admin has just given up.
Re. your suggestion about checking IPs etc. There are no
"hidden clients"! When the Admin fails it is possible to be on a
machine with a single connection (i.e. my client). When I reload my
client there is a trace that I have disconnected, then reconnected
again *but* the connection count goes up by one. If I reload twenty
times the count will increase to 20. Even if I close my browser the
connections will apparently stay, sometimes for days!
As I mentioned, this happens on multiple servers with lots of
different clients and very, very low load. When it happens is, so
far, unpredictable other than it will happen and bring down our
live system.

Script Command limit exceeded! - incorrect

I have a project which I have a lot of scripts in,
every time I try and build it it says Command limit exceeded! and gives me the name of the script.
however I am way under the limit and even if i delete all the lines of code in that script and then try and built it still shows the same error. I haven't done any GPRM partitioning so I can't see what i am doing wrong. Even if i delete that script entirely another one will be flagged up in the same way, even if it only has 3 lines in it.
I have tryed it on 3 machines with DSP 4.2.1 and 4.2.2
any help greatly appreciated
al

I would think the project file is somehow corrupted. You certainly won't be up against any limits if all your scripts are this short, AFAIK.
Have you tried saving this out with a different project name and re-opening that? Deleting the PAR files and so on... all the usual remedies?
There is also a way to script the same thing but use less scripts (but more complex math). You can go to any menu you want if you know the value of the menu (menu 1 has a value of 32, menu 2 is 64 and so on). Using some fairly simple calculations you can get to just about any location you want with a few lines of code. You'll be under the command limit, but the scripting is a little more obscure than your current way.
So, filling a GPRM with a value of 32, and then using a 'Jump Indirect' will take you to the first menu:
Mov GPRM0, 32
Jump Indirect GPRM0
You can do this for tracks and stories too, but the values are different. Track 1 has a value of 49280. They increment in jumps of 128, and include stories too - so track 2, story 1 would be the equivalent of 3x128+49280.
The thing is, it doesn't matter which track you have got - this all relates to the layout in the outline view. Track 1 is always the one at the top of the list - and has the value 49280. You can move content around in the list and still know that 49280 will get you to track 1. The same is true for your menus - whichever is at the top of the list is menu 1, and a jump indirect of 32 will get you to it.
What this will do is reduce the total number of scripts you are using and reduce the number of commands in use. It will also give you much more flexibility as you never have to use menu names and track names in your scripts which is useful if you are re-using projects and altering the number of items in each. However, it won't be as simple to follow through as the extended scripting you are using now... so much depends on where you are with your understanding of scripts, I guess!
Have a look here for some more general info:
http://www.dvdstudiopro.co.uk/tutorials/play-all-3/
Remember, the files in that tutorial are demo files... you'll need to set your disc up more thoroughly that I've done there if you want to use the sample as a real production.

HIS 2013 - Command Timeout - Dynamic DB2 Sendport

Hi ,
In one of our application (BizTalk 2013 R2), We are integrating with DB2 (Host Integration server 2013) using dynamic sendport. The default command timeout for DB2 is 30 seconds. This timeout can be increased in DB2 static sendports.
But as we are using Dynamic sendport, we are not seeing such option in the context properties to set the command timeout.
Any suggestions on how to set command timeout for dynamic DB2 sendport?
Thanks,
Karthik M
karthik

This timeout can be increased in DB2 static sendports. But as we are using Dynamic sendport, we are not seeing such option in the context properties to set the command timeout.
As you said, we really can't set timeout for Dynamic send port, you can consider
contacting Microsoft support directly(http://support.microsoft.com)

Qlogic scsi command timeout

Hi,
I am doing some testing for Windows 2008 R2 SP1 boot from SAN with Qlogic HBAs.
We noticed that a logical path failure will hang IO on the server for about 30 seconds...
From traces it looks like 20 seconds is some king of timeout waiting to be expired (I suspect some kind of scsi command timeout)
Another 7 seconds is spent with MPIO to disable that logical path...
I tried searching the internet for such a timeout on windows and could not find any.
Any of you know about this? Is there a way to verify this parameter value?
Thanks
Offer Baruch

Hi,
I am doing some testing for Windows 2008 R2 SP1 boot from SAN with Qlogic HBAs.
We noticed that a logical path failure will hang IO on the server for about 30 seconds...
From traces it looks like 20 seconds is some king of timeout waiting to be expired (I suspect some kind of scsi command timeout)
Another 7 seconds is spent with MPIO to disable that logical path...
I tried searching the internet for such a timeout on windows and could not find any.
Any of you know about this? Is there a way to verify this parameter value?
Thanks
Offer Baruch
You may increase default 30 seconds timeout to whatever you want (don't go too high however, 180 sounds like a maximum working one).
Changing the disk timeout on Microsoft Windows Server
Learn how to change the disk timeout value on Windows Server 2000, 2003, and 2008 operating systems.
On your Windows Server hosts, change the disk I/O timeout value to
xxx in the Windows registry, as follows:
In Windows, click Start > Run.
In the dialog text box, type <samp class="ph codeph">regedit</samp> and click Enter.
In the registry browsing tool, locate the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Disk\TimeOutValue key.
Confirm that the value for the key is xxx (decimal value). If necessary, change the value to
xxx.
You can read more info here:
http://blogs.msdn.com/b/san/archive/2011/09/01/the-windows-disk-timeout-value-understanding-why-this-should-be-set-to-a-small-value.aspx
Hope this helped. Good luck!
StarWind VSAN [Virtual SAN] clusters
Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses
Ethernet to mirror internally mounted SATA disks between hosts, starts with just a pair of boxes and scales-out to infinity.

FailedSend Playback Command Timeout!

hi all
iam getting the below error after clicking on the distributions button in the invoice workbench form when i am executing from command line.
Failed Send Playback Command Timeout! command:forms.button("//forms:button[(@name='LINE_SUM_CONTROL_DISTRIBUTIONS_0')]").click(), timeout: 10000
can anybody tell me the fix for this issue it is little bit urgent

1. add Thread.sleep(10000); before the click
2. you can also try adding
forms.button("//forms:button[(@name='LINE_SUM_CONTROL_DISTRIBUTIONS_0')]").waitFor(5000);
before
forms.button("//forms:button[(@name='LINE_SUM_CONTROL_DISTRIBUTIONS_0')]").click();
3. verify the attributes and change "or" between attributes to "and"
in any case if its not working, plz add 2-3 lines of code before and after the problematic line,and attributes of the button. it would help understand issue better.

TimeOut Exceeded in SMQ2- queue Block

Hi all,
I am having an issue with my production PI BOX. Not sure if there is any solution for this.
I have some interfaces in PI which expects huge payload data.Sometime the messages are getting failed in SMQ2 with error message " Time Limit Exceeded ". This is not happening with one particular interface message.Sometime teh queue got blocked for one interface and then the other day with some other interface.
When i tried to resend the same messages by selecting Execute LUW option, all of them have gone through fine. But we cannot do this manually everyday. I just wants to know where exactly the time out parameter has been maintained for pipeline processing.
The messages are getting timed out in receiver grouping pipeline step.
I have gone through the = Michal Blog : 3802 about the time out. But nothing helpful on that.
Could anyone of you help me out here?

Hi
We are using JDBC communication channels for all these interfaces. But messages are failing in SXMB_MONI .ideally it means that messages are still in Integration engine. right?
It doesn't send teh message to adapter engine
If we increase timeout level at adapter level, does it really help? If yes how come? Could you please explian?
Thanks
Rajesh

FlexUnit 4.1 RC1 - adl.exe hangs and is not killed when timeout exceeded

I am running AIR based tests using FlexUnit 4.1 RC1.
I have the "timeout" parameter of the FlexUnit Ant task set to 45 minutes (2700000 milliseconds). I expect that if this threshold is exceeded, the runner should be killed and the ant task will exit. I am not seeing this behavior. The adl.exe task continues to run, even though the timeout has been exceeded.
Is this a known issue?
Thanks,
Trevor

Brian,
Thanks!
Ah... OK, I was thinking the timeout was more like the JUnit ant task timeout when running in forked mode, i.e.the entire test run has that amount of time to complete (see http://ant.apache.org/manual/Tasks/junit.html). I know I was making an assumption there, but it seemed logical to me since the Flexunit test runner is essentially a forked process...
So, you are saying that the timeout in the FU 4.1 ant task specifies the time to wait for a connection from the SWF running in the player? I see this stated in the Ant task doc on the wiki now - Doh! You also say that the timeout also applies to each individual test? So, it sounds like the behavior is similar to the JUnit ant task running in "perTest" forkmode.
Out of curiosity, is there any way to specify an overall timeout for the entire test suite run, by chance?
Anyway, I figured out why adl.exe was hanging. Evidently an error occurred in the tests which caused a pop-up window to be spawned, and this halted test execution. When I clicked "Dismiss All", the execution continued. Of course, in a CI environment, there is no one there to click the button to dismiss the pop-up! So this is kind of a show-stopper. Is there any way to configure the player (Flash or AIR) to suppress pop-ups, or at least not to stop execution when they occur?
Thanks,
Trevor

How to set Crystal Report command timeout in runtime ?

Hi, All !
I have a report that is generating timeout error during execution command (Crystal Report command with SQL query). How can I set timeout for the command from application code ? I am using CR 12 and C# (.NET framework 2.0)
I have investigated CommandTableClass (CrystalDecisions.ReportAppServer.DataDefModel.CommandTableClass) but I didn't find timeout property or simething like that.
Please help.
Thank you in advance.
Edited by: Bonowow on Feb 24, 2010 11:38 AM
Edited by: Bonowow on Feb 24, 2010 11:42 AM

I do not believe there is such an API. How long does it take before you get the timeout?
Ludek

TimeOut Exceeded in Inbound BPE queue

Hi All,
We have been facing an issue in our PI production box which stops the whole BPE inbound queue for one particular BPM.
We have a simple BPM pattern to spilitt messages
Receive Message>Transformation which includes Java mapping>Send step Inside Block with multiline elemnet ( To send n number of messages to target application using HTTP adapter).
We received 5 MB file for this interface and it got failed in BPE inbound queue with error message "Time Limt Exceeded". The IP is using One queue and Buffering possible options. Ideally what happens is message is getting blocked in the BPE inbound queue which stops other messages.
There is always active receive step is available to receive messages from Q.
The corresponding Integration process was not able to pick the message which 5-7MB file size. The BPM is running fine without any issue when file size is smaller.
I have gone through the following documents already.
How To Configure Inbound Processing in ccBPM Part I: DeliveryMode
How to Configure Inbound Processing in ccBPM Part II Queue Assignment
How ToConfigure ccBPM Runtime Part III: Transactional Behavior of an Integration Process.
Could anyone suggest me if i hcan change any default settings which mentioned in above documents? Rightnow i am using "One Queue" and "Buffering possible" options.
Where exactly time limt settings are maintained for BPE inbound queue?
Edited by: Rajesh on Oct 27, 2009 11:47 PM

First thing that I would do is to remove the queue specification in the BPM. This way, it will not block any other messages of the BPM. Then check for any Runtime paramters in SXMB_ADM for increasing the wait time.
VJ

Query/SQL command timeout

Greetings,
I am writing an interface to a product using OCI API's. I have a question about designing this interface.
If we are able to successfully establish connection with Oracle databae and
the query takes long time to execute/OCIStmtExecute(), is there any way to timeout the query and return ?
Can we set a timeout parameter using OCI API's or Oracle instant client configuration files ?
Earlier posts in the forums reveals that there may be no such parameter. I believe this is a fairly common problem and there must be some solution for this or do I need to install any oracle patch ?
Best Regards
Murthy

You should have minimum 1 sec when you use oracle
native
Oracle Bequeath NT Protocol.This is a loopback.But if I set it to 3, 10 or whatever than sqlplus is just hanging and uses 100% CPU.
I have started sqlplus with strace and there is a loop while invoking the pool function.
bind(7, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("127.0.0.1")}, 16) = 0
getsockname(7, {sa_family=AF_INET, sin_port=htons(32918), sin_addr=inet_addr("127.0.0.1")}, [46909632806928]) = 0
getpeername(7, 0x7fffffb9bd5c, [46909632806928]) = -1 ENOTCONN (Transport endpoint is not connected)
getsockopt(7, SOL_SOCKET, SO_SNDBUF, [-6148700272152420352], [4]) = 0
getsockopt(7, SOL_SOCKET, SO_RCVBUF, [-6148700272152420352], [4]) = 0
fcntl(7, F_SETFD, FD_CLOEXEC) = 0
fcntl(7, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
pipe([8, 9]) = 0
pipe([10, 11]) = 0
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x2aaaaccacf30) = 15442
--- SIGCHLD (Child exited) @ 0 (0) ---
rt_sigprocmask(SIG_BLOCK, [PIPE], NULL, 8) = 0
rt_sigaction(SIGPIPE, {0x2aaaabb3c838, ~[ILL ABRT BUS FPE SEGV USR2 XCPU XFSZ SYS RTMIN RT_1], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x2aaaac851bd0}, {SIG_DFL}, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [PIPE], NULL, 8) = 0
wait4(15442, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 15442
close(8) = 0
close(11) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
poll([{fd=7, events=POLLIN|POLLRDNORM}, {fd=7, events=0}, {fd=10, events=POLLOUT}], 3, 0) = 0
BTW, what is this Bequeath NT Protocol?

DBM_EXECUTE command timeout exceeded

Similar Messages

Maybe you are looking for