DBMS_JOB not running every 30 minutes

Hi All
I am using DBMS job to schedule a job as I am still using version 9 oracle:
variable jobno number;
begin
dbms_job.submit(:jobno, statspack.snap(i_snap_level => 6, i_modify_parameter => 'true'), SYSDATE, 'sysdate + 30/1440', TRUE);
commit;
end;
However the job still runs hourly(default) even with the interval specified as 'sysdate + 30/1440'
Please advice
Thanks
Parvez

JOB_QUEUE_INTERVAL is obsolete in 9i. You can set a hidden parameter of JOBQUEUE_INTERVAL but from what I can tell, the job queue cordinator wakes up every 5 seconds to run.
I use dbms_jobs in 9i and 10g without any problems. I actually have a scheduler that wake up every 60 seconds to run.
When running select * from dba_jobs, is your job broken? What is the NEXT_DATE value?
If everything looks ok, try removing the job and then inserting the job again.

Similar Messages

DBMS_SCHEDULER. How do I set frequency to run every 30 minutes

Hi,
I need this job to run every 30 minutes, lets say on 15 minutes and 45 minutes past the hour. What are the necessray changes. I have looked through the docs and have been getting errors when I try and change the line repeat_interval.
begin
dbms_scheduler.create_schedule(
schedule_name =>'HOTLIST_GENERATION',
start_date =>to_date('01-MAR-2007 02:30','DD-MON-YYYY HH24:MI'),
repeat_interval =>'FREQ=Hourly',
end_date =>NULL,
comments =>'Schedule for Hotlist generation');
end;

Perhaps repeast_interval => 'FREQ=MINUTELY; INTERVAL=30'
See the dbms_scheduler entry in the Oracle PL/SQL Packages and Types manual.
HTH -- Mark D Powell --

DBMS_JOB Not running for the scheduled time, but run with .run fucntion.

Hi all,
I am executing a job every 15 minutes which have to delete the rows created in every 30 minutes.
========================================
Jobs Submitted as -
begin
sys.dbms_job.isubmit(job => 202,what => 'del_test_info_p;',next_date =>sysdate,interval => 'sysdate + 15/1440');
commit;
end;
==================================
Procedure that is running in Job -
CREATE OR REPLACE procedure del_test_info_p is
cnt number;
begin
select count(*) into cnt from test where ((created_at+30/1440)<=systimestamp);
update jobcount set cnt=cnt+1 ;
delete from test where ((created_at+30/1440)<systimestamp);
update jobcount set cnt=cnt+1 ;
commit;
dbms_output.put_line (cnt ||' ROWS DELETED');
end del_test_info_p;
=====================================
PROBLEM - Job is running in every 15 minutes as per user_jobs but rows are not deleteing from the test table whose created time is more then 30 minutes from systimestamp. Even the views are not having logs of any job run.
Checked the queries and run the job Manually using dbms_job.run.. gives correct output and deletes the row.
Please suggest where is the problem and how I can correct it.
With Regards
Amit Nanote

HI All,
I have found solution for this. Dont use Systimestamp in the DML's if using in a job (scheduled).
There is a statement in procedure del_test_info_p
delete from test where ((created_at+30/1440)<systimestamp);
Here usage of systimestamp restricting that procedure to execute.
Create procedure as -
CREATE OR REPLACE procedure del_test_info_p is
tstamp timestamp;
begin
select systimestamp into tstamp from dual;
delete from test where ((created_at+30/1440)<tstamp);
commit;
end del_test_info_p;
Thank You.

DBMS_JOB not running properly

DB Version:9i Rel 2
I have scheduled the execution of an Auditing Stored proc every 30 seconds. But this SP is not running.
Is there any other init.ora parameter i need to set to schedule a job to run for such a small frequency?
I have issued a COMMIT after the job creation. Is this necessary?
my code
variable myjob_no number;
begin
     dbms_job.submit
     (job          => :myjob_no,                         --out parameter
     what          => 'BEGIN MY_STOREPROC; END;',     --the auditing sp
     next_date     => sysdate,                         --start date, starting now
     interval     => 'sysdate+(30/86400)'                    -- run every 30 seconds
end;
commit;

The COMMIT is definitely necessary.
However, as far as I remember, the parameter job_queue_interval was deprecated in 9i and set to 60 seconds internally.
An audit procedure NOT using Oracle's built-in auditing capabilities also looks like a bad idea.
Can you explain what you are trying to accomplish?
Sybrand Bakker
Senior Oracle DBA

Ever since version 5, FF becomes "not responding" every 4 minutes.

ff 5 and beyond (i even downgraded to 3.6) becomes "not responding" every 5 or 6 mintues for more the 3 minutes.
Right now is even worst. I DON'T have FF.
Is unusable.
I tried disabling everything. still the same.
I tried uninstalling chrome cause ever since google+ installed chome on my laptop, FF started acting up.
But nothing seems to fix FF.
PLEASE ADVICE!!!!!!!!!!!! I can't live without FF. :(

Safe mode is similar to private browsing. So you will want to run in normal mode.
Now if you choose to delete and reset then you have brought all the settings back to start up state.
Try starting up in the normal mode, if this fixes things then you are ready to go.
If not, then start in the safe mode with Add-ons disabled, once it starts up go to Add-ons and disable the last one installed and try a normal start up. Do this until the culprit is found.
If you don't care about the Add-ons then just create a new [[Profiles]] and be done with it.

Schedule Job to run every 15 minutes from 5 AM to 10 PM

Hello,
I am interested to have a job running from 5:00 AM to 10:00 PM every day, every 15 minutes
Is it possible with Oracle 10g DBMS_scheduler?
Thanks

Hi,
You can check this form here :http://www.oracle-base.com/articles/10g/scheduler-10g.php
Hope this help

Compilingh a procdure which runs every 15 minutes haning

Hi,
We have a schedule set up to run a pl/sql packaged procedure every 15 minutes.
Oracle 11.2.0.3 on AIX Power Series 7
Runs fine but when need make change to pacakge, finding that have to stop the scheduled job, change and recompile procedure then recreate the schedule.
Is this expected behaviour or are we doing something wrong?
Could try dbms_scheduler.disable job?
Thanks
Edited by: user5716448 on 05-Nov-2012 10:40

Found out was because running when trying to compile.

Problems with DBMS_JOB - not running jobs

Hello,
for some reason our Database (after night restart - shutdown at 23:00, startup at 0:20) stopped to run jobs from DBMS_JOB. I've enabled them manually (DBMS_JOB.RUN(2334)) - but they still not run after reaching the NEXT_DATE,NEXT_SEC time.
I've noticed that:
select * from dba_scheduler_global_attribute where ATTRIBUTE_NAME='CURRENT_OPEN_WINDOW';
ATTRIBUTE_NAME VALUE
CURRENT_OPEN_WINDOW TUESDAY_WINDOW
Current day of week is wednesday not tuesday - and I think that is the reason.
I've tried this statement:
SQL> execute DBMS_SCHEDULER.CLOSE_WINDOW(WINDOW_NAME => 'TUESDAY_WINDOW');
BEGIN DBMS_SCHEDULER.CLOSE_WINDOW(WINDOW_NAME => 'TUESDAY_WINDOW'); END;
ERROR at line 1:
ORA-00449: background process '' unexpectedly terminated with error
ORA-06512: at "SYS.DBMS_ISCHED", line 347
ORA-06512: at "SYS.DBMS_SCHEDULER", line 968
ORA-06512: at line 1
Is there any other way to fix this problem without restart of database?
Thank you for any help
Best regards

Manually execute the job and let it run itself beginning next Tuesday.

.Mac mail to iphone not occuring every 30 minutes as set

I have the phone set to retrieve mail from .Mac every 30 minutes. It is not doing this. When I go into Mail, that is when it starts to retrieve mail.
It seemed to be working a few days ago. I wonder if this stopped with the 1.1.1 update?

The difference between POP and IMAP are the difference in how the two protocols work. Essentially, messages are removed from the email host's servers (in your case swbell.net) when using POP, wherease IMAP leaves a copy of the messages on the server for later. You will notice a difference for instance, if you had another machine you wanted to set up a mail client on or if you had to perform an erase in reinstall, you'd lose all emails if you used POP without making the client leave the messages on the server since they only exist on your mac.
In Mac Mail's Preferences -> Accounts -> Account Information, you can tell Mac Mail to stop deleting the message from the server so your iPad and other devices can also grab the messages as well.
As far as mailboxes, with a POP account, those mailboxes are created locally, so they only exist on your mac. If the account was IMAP, you'd have the option to create the mailbox on the server, which would allow you to not worry about losing messages in the event of an erase and reinstall, especially if you didn't have a backup.
The iPhone and other devices will only be able to grab what is set up on the server, so in my opinion, IMAP is the superior protocol, as it has less chance for data loss than POP, even if you don't have a backup. Providers such as GMail and Yahoo offer both, but most Gmail accounts are IMAP, and it simply depends on your account if your provider is Yahoo.
iCloud is completely different; It is an IMAP email server provided by Apple. Think of it as another email address you have. Unfortunately, it will do you no good unless you start using it for email as you do with your current one.
Hopefully that helps a little and isn't too technical.

Dbms_job not running

Hello,
My scheduled dbms_job is not running. They have been running in the past months but not a few days ago. The jobs would run when I bounce the database but would not run again as scheduled, next_date. Thank you.

As mentioned in the previous post, you check broken job status, fix it and rerun it.
You may refer Supplied packages documentation for DBMS_JOBS procedures.
Ashok

Materialized View to be run every 1 minute through dbms_scheduler

Hi,
I have a materialized view on 1 database which has its select statement going across a database link to numerous tables on another database.
The materialized view creates fine and when refreshed using dbms_snapshot refreshes without error.
My requirement is to automate this refresh for every minute. I have created a job through dbms_scheduler for the refresh to happen every minute but it fails with the error message
ORA-12008: error in materialized view refresh path
I have ctreated another materialized view on the database which does not go across a dblink and scheduled this though dbms_scheduler for every minute, this works fine.........
So it appears my issue is the selecting from tables across a dblink.
Does any one have any experience of this area, how to resolve this issue or maybe an alternative solution than dbms_scheduler?
Thanks in advance.
Mark.

How is your database link defined?
Is it using a fixed user? i.e create database link .... identified by xxxxx
I think it needs to be to be used in a scheduled job.
Carl

"The Pure Networks Platform Service Is Not Running" every time I print

I will be glad to follow-up with all the gory details about my system, but I thought I'd throw out a general question first. I just installed a network printer to my NM Network. It's a Lexmark 543dn connected via ethernet. Everything prints just fine, the Map shows it as a Network Printer,etc..
The only problem is that every time I print, the Platform Service stops running and I get a general Windows Error message asking whether I want to "report" the error. You know the one...you have to click SEND or DO NOT SEND. The Platform can be easily restarted without problems. Is this a common problem..with hopefully a common solution?
FWIW, it becomes a pain when the kids have to come fetch me when the error message comes up; they think they did something wrong. Plus, if I'm not mistaken they need to restart the platform service if they want to continue printing to the sole color laser in the house.

Hi, we do need the info in the sticky topic so we can see what your hardware and software is. Not all crashes happen on all systems.
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

LaCie Backup Runs every few minutes?

I have a LaCie external for backup purposes. I do not believe I have any auto backups set (I use super duper manually). Every 10/15 minutes it looks like the blue light flickers and the LaCie is trying to do something. It slows down some of the operations of my computer. Does anyone have an idea of what I can check to fix this?
Thanks, Jim

Jim Kaye wrote:
I will say that the LaCie still blinks every 10-15 or so minutes for a few seconds (maybe that is normal?).
It's possible depending on what operations you're doing. If you're not touching the computer and it keeps doing that something is wrong. But does it compromise any functionality?
Jim Kaye wrote:
On reindexing
1. I assume it doesn't remove the erase the hd and I have to do a new backup or does it?
No, not at all. It just creates a fresh index for the files on it.
Jim Kaye wrote:
2. This is what I did. Rebooted using the LaCie. Then opened the privacy tab (which had nothing in it). Dragged the LaCie icon from the desktop to the privacy box. *It would not move from there, so I then deleted it.* Then I rebooted using the mac HD.
I'm not sure why it wouldn't move you should be able to drag it into and out of privacy.
http://support.apple.com/kb/HT2409
I would try that again and then if you succeed allow the drive to fully re-index before restarting from another disk.
Another way is simply to open Terminal and copy & paste the following command
sudo mdutil -E /
Press Return, type your Admin password when prompted for "Password:", then press Return again.
Your password will be invisible.
This tells the system to erase the existing Spotlight indices on your *current startup disk*, which should be your LaCie.
You'll receive a message indicating that the volume index was removed and will be rebuilt immediately.
-mj

How can i make Garrysmod not crash every 5 minutes?

ive been playing on the mackbook Air (hands down the most awefull peice of machenery with the shame to call itself a computer ive ever been on) and within 5-10 minutes of playing on Garrysmod it will crash the game. Ive only recently been having the problem and ive tried every fix possable... please help.

Hi Tom,
sorry for late response.
i have Analysis services(AS) Data base. which is configured with ROLAP settings in SSAS.
we are showing this AS Database Information in Dash boards.
once we open the dash board, it will shows the latest information in dash boards obviously.
but, Mean while if any changes occured in AS data base, if we want to get that changes in dash boards we have to refresh the dash board (OR) we have to close & reopen the same dash board.
apart from this if is there any other solutions technically, Please suggest me.
Thanks,
SUPRAJA'S

Scheduling job to run every 45 minutes

Hi, i have to execute a batch evert 45 minutes, everyday except friday.
i gave the below but its executing evey hourly i.e 60 min not 45 min, can some1 plz help
BEGIN
DBMS_SCHEDULER.create_job (
job_name => 'JOB',
job_type => 'PLSQL_BLOCK',
job_action => 'BEGIN JOB; END;',
start_date => SYSTIMESTAMP,
repeat_interval => 'FREQ=DAILY; BYDAY=MON,TUE,WED,THU,SAT,SUN;BYHOUR=9,10,11,12,13,14,15,16,17,18,19,20,21; BYMINUTE=45;',
end_date => NULL,
enabled => TRUE,
comments => 'TO test proc');
END;
/

BEGIN
DBMS_SCHEDULER.create_job (
job_name => 'JOB',
job_type => 'PLSQL_BLOCK',
job_action => 'BEGIN JOB; END;',
start_date => SYSTIMESTAMP,
repeat_interval => 'FREQ=MINUTELY; INTERVAL=45;BYDAY=MON,TUE,WED,THU,SAT,SUN',
end_date => NULL,
enabled => TRUE,
comments => 'TO test proc');
END;
/

DBMS_JOB not running every 30 minutes

Similar Messages

Maybe you are looking for