DBMS_JOB.REMOVE procedure

Hi,
I submitted a Stored Proc as an Oracle JOB using DBMS_JOB.SUBMIT procedure to execute everyday. I checked it in DBMS_JOBS and USER_JOBS views, I couldn't find it. I submitted the job again. Now that I could see two jobs scheduled (the same procedure) for a daily execution. If I remove the jobs using DBMS_JOB.REMOVE procedure and check the dbms_jobs view in the same session, I cannot see the jobs as scheduled. When I check from another session, the jobs are still scheduled and both of them gets executed on a daily basis now, which I don't need. Why the DBMS_JOB.REMOVE is not removing the job from the job queue? Any clue?
My Oracle Version is 9.2
meetme

If you have exited from the session using exit, then, the job which you remove should have gone. I mean, when you use exit from the session pre-commit take place.

Similar Messages

Dbms_job.remove

I have some jobs scheduled.I am querying the table user_jobs there i am getting 50 rows.I want to remove the job.
i am executing the statement below through a sql statement:
exec dbms_job.remove(110) ;
exec dbms_job.remove(200);
where 110,200 is the job[obtained from user_jobs].
The execution is taking long time. Does anybody has knowlegde how to remove oracle scheduled job?
Thanks in advance...

You must issue a COMMIT statement immediately after the statement.
BEGIN
   DBMS_JOB.REMOVE(110);
   DBMS_JOB.REMOVE(200);
   COMMIT;
END;If you did commit already, realize that removing a job does not stop it. If you want to stop the job, you must kill the session. DBMS_SCHEDULER, however, does have a STOP_JOB procedure.

DBMS_JOB.REMOVE hangs

Hi,
SunOS 5.10 SPARC platform with Oracle 10g (10.2.0.1) database.
When i try to execute DBMS_JOB.REMOVE(job) it hangs and doesnt complete. I have even used DBMS_IJOB for this purpose, but did not succeed, that too hangs. I have also set JOB_QUEUE_PROCESSES=0 and then trying all these, still no luck. Unable to remove the job. Any help is appreciated.
Thanks
Siva

user11975950 wrote:
Hi,
SunOS 5.10 SPARC platform with Oracle 10g (10.2.0.1) database.
When i try to execute DBMS_JOB.REMOVE(job) it hangs and doesnt complete. I have even used DBMS_IJOB for this purpose, but did not succeed, that too hangs. I have also set JOB_QUEUE_PROCESSES=0 and then trying all these, still no luck. Unable to remove the job. Any help is appreciated.
Thanks
SivaDid you tried to kill the session?
HTH:-)

DBMS_JOB.SUBMIT ( procedure call with parameter )

Hello,
I am trying to call procedure with input parameter using dbms_job.SUBMIT and it gives me the value of p_email must be declared.
declare
my_job number;
p_email varchar2(50) := 'abc';
my_pro varchar2(100) := 'BEGIN my_pkg.my_proc(' || p_email ||'); END;';
BEGIN
     DBMS_JOB.SUBMIT(JOB => MY_JOB,WHAT => my_pro);
END;
if anybody knows how to solve please let me know ASAP.
TIA

SQL> set serveroutput on;
SQL> declare
2    my_job number;
3    p_email varchar2(50) := 'abc';
4    my_pro varchar2(100) := 'BEGIN my_pkg.my_proc(' || p_email ||'); END;'
5 BEGIN
6   dbms_output.put_line(my_pro);
7 END;
8 /
BEGIN my_pkg.my_proc(abc); END;
PL/SQL procedure successfully completed.i think i should also be enclosed in single quote. see this example below.
SQL> declare
2    my_job number;
3    p_email varchar2(50) := 'abc';
4    my_pro varchar2(100) := 'BEGIN my_pkg.my_proc(' ||''''|| p_email||'''' ||'); END;';
5 BEGIN
6   dbms_output.put_line(my_pro);
7 END;
8 /
BEGIN my_pkg.my_proc('abc'); END;
PL/SQL procedure successfully completed.
SQL>
your job would look like:declare
my_job number;
p_email varchar2(50) := 'abc';
my_pro varchar2(100) := 'BEGIN my_pkg.my_proc(' ||''''|| p_email||'''' ||'); END;';
BEGIN
   DBMS_JOB.SUBMIT(JOB => MY_JOB,WHAT => my_pro);
END;

Dbms_job.submit procedure called from Forms

Folks,
Since the DBMS_JOB.SUBMIT cannot be executed directly within a form, I created a simple procedure on the database which makes the call to DBMS_JOB.SUBMIT as follows:
FUNCTION web_newsletter_submit_job(p_letter_id NUMBER) RETURN NUMBER IS
v_jobnum NUMBER;
BEGIN
DBMS_JOB.SUBMIT (v_jobnum, 'send_mail_html2 (''DailyRacingForm<[email protected]>'', ''[email protected]'', ''DailyRacingForm<[email protected]>'', ''test subject'', ''test body'');',
TRUNC(SYSDATE) + 22/24);
RETURN v_jobnum;
END;
From SQL/Plus I can declare a varialbe and execute this procedure as follows:
v_jobnum := web_newsletter_submit_job(22) ;
then I can view the v_jobnum and find the job in the DBA_JOBS table.
My problem is when I execute the 'web_newsletter_submit_job' function from with Forms, my job never gets created. The function actually returns a job number and my Form display it via the Message() function; however, the job number never shows up in DBA_JOBS table.
Any ideas why I can successfully create the job from sql/plus but not from Forms ???
Regards,
Bob

you made a FORMS_DDL('COMMIT') right? without commiting, the jobe will never get executed.
Cheers, Stefan

Remove Procedure

How do I remove a PL/SQL procedure?
In particular, I attempted to "Create or Replace Function MYFUNCTION" when MYFUNCTION had previously been a procedure, and I get the following:
ORA-00955: name is already used by an existing object
Since I would like to keep the same name, and more importantly, figure out how remove (or delete) the procedure.
Thanks,
james smyth

drop procedure MYFUNCTION;
Then continue with you create or replace ...

Whether dbms_job accept procedure with argument

I am a new Oracle User.
Following is the code i am trying to make run.
create or replace trigger pp
after insert
on pipe
for each row
v_job number;
p number;
begin
p:=:new.id;
dbms_job.submit(v_job, 'sample(p);', null);
end;
Here p is the inserted value in column id of table pipe
& sample is a procedure with argument of type number.
Is it possible to call a procedure by dbms_job with argument from new inserted value in the table by using a trigger.
Thanks in advance.

Yes, like this:
http://asktom.oracle.com/pls/ask/f?p=4950:8:4349110936516212294::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:7267435205059

Mm02 tcode attacment list remove procedure

Dear Experts,
MM02 Tcode security issue
In MM02, mention the material number and choose the Basic view & click on "Attachment list" as shown below
Once you click on attachment, you can see the attachment list in pop-up where you can select & view the documents.
NOTE: But we need to remove the attachment list view authorization could you please give solution for blocking the attachment list & create attachment
we are trace the tcode through ST01 But we are finding those objects S_BDS_DS , S_ALV_LAYO, S_GUI Three objects only for this i checked and blocked the object it will not work
please help me to sort out issue .
Best Regards
Suresh M

I found the solution for blocking the "Attachment list" & create attachments of services of object button through changing the parameter its self it will not appear in the tcodes MM01,MM02 and mm03
procedure :
go to >>>>SU01 Tcode >>>>>>>>parameters tab >>enter the parameter
SGOSNOBUT x Do not display button 'Services for Object'
and save it
Best Regards
SURESH

Removal procedures for iOS 8 from an iPad

I need to remove iOS 8 from my iPad. My iPad is pretty much non-functional at this time.

There is no Apple supported* way to downgrade iOS versions, or roll back updates.
What fixes have you attempted for the issues?
Have you tried to reset the iPad?
Have you tried to Restore it as new to refresh the installation?
Its possible something went wrong with the installation, and its causing these issues?
To Reset the iPad hold down the home and Power/sleep buttons until the Apple logo shows up.
If that does not fix it, try a restore:
Use iTunes to restore your iOS device to factory settings

Jobs in dbms_job queues

How can I tell if a job is in a job queue? Also, how can I completely drop the job?
Thansk!

Assuming a DBMS_JOB job rather than a DBMS_SCHEDULER job, query DBA_JOBS (or USER_JOBS or ALL_JOBS depending on the situation).
You can prevent future executions of the job by using the DBMS_JOB.REMOVE procedure. If the job is currently executing, though, dropping the job doesn't stop that execution-- you'd have to kill the session (or wait for the current execution to finish).
Justin

Scheduling stored procedure using DBMS_JOB package

I have stored procedure called extract_every_day, I want this procedure to run automatically at 7:00 PM every day.
I used DBMS_JOB.SUBMIT to achieve this, below is pl/sql block
DECLARE
v_jobno number ;
BEGIN
DBMS_JOB.SUBMIT
(v_jobno,
' extract_every_day ',
TRUNC (SYSDATE) + 1 + 9/24,
'TRUNC (SYSDATE) + 1 + 9/24');
COMMIT;
END;
When I run above pl/sql block is that mean procedure extract_every_day executes every day and what is the significance of job OUT parameter in DBMS_JOB.SUBMIT procedure. Also how can I see list of jobs submitted.
Any help is appreciated.
Thanks

The OUT parameter is the unique number of the job being executed. This is the Sequence generated from sequence sys.jobseq
Also, in the example you have provided, the Job will run at 9Am and not 7PM.
To make it run at 7PM every day change the following lines :
'TRUNC (SYSDATE) + 1 + 9/24'
'TRUNC (SYSDATE) + 1 + 9/24'
To ,
'TRUNC (SYSDATE) + 19/24' <-- Changed
'TRUNC (SYSDATE) + 1 + 19/24' <-- Changed
Also do remember to include the parameter "job_queue_processes" parameter within the init.ora file. This parameter is used to determine the max no
of concurrently running jobs (i.e. Set in Init.ora).
NOTE :- Job_queue_process cannot be set to 0. If set to 0, no jobs is run.
he view dba_jobs and dba_jobs_running should be used to view the jobs.
-- Shailender Mehta --

Submitting job from a procedure

Hi,
I need to submit a job and call it frm a procedure. I need to run the job exactly at 12 in the midnight. How will i pass the start_time to the job? the problem i face here is the procedure can be called on any date. following is the procedure
CREATE OR REPLACE PROCEDURE JOBS(DT NUMBER)
AS
L_JOB NUMBER;
BEGIN
     FOR I IN (SELECT JOB FROM USER_JOBS WHERE WHAT LIKE 'SPARCHIVE%')
     LOOP
           DBMS_JOB.REMOVE(I.JOB);
     END LOOP;
     DBMS_JOB.SUBMIT(L_JOB, 'SPARCHIVE('||DT||');', SYSDATE , 'sysdate+1');
     commit;
END;
/pls help me how to do it.
Thanks
Muneer

Current date and time
SQL> SELECT to_char(sysdate, 'DD-MON-YYYY HH24:MI:SS') FROM dual;
TO_CHAR(SYSDATE,'DD-
18-OCT-2004 13:13:09the previous midnight...
SQL> SELECT to_char(trunc(sysdate), 'DD-MON-YYYY HH24:MI:SS') FROM dual;
TO_CHAR(TRUNC(SYSDAT
18-OCT-2004 00:00:00the next midnight...
SQL> SELECT to_char(trunc(sysdate+1), 'DD-MON-YYYY HH24:MI:SS') FROM dual;
TO_CHAR(TRUNC(SYSDAT
19-OCT-2004 00:00:00Okay?
Cheers, APC

Procedure doesn`t like 'distinct'

Hi,
Ive written a simple procedure so that a job runs at a certain time every week,but i noticed that the job was being done more than once every week...and that this was due to more than one sysdate in the database.When I select sysdate from dual i get back a sysdate for every row in the table(even though these sysdate times are all identical)...therefore i want to have a 'distinct' sysdate in my procedure.
This procedure works,but it gets done alot more times than once,and i only want it done once.
BEGIN
dbms_job.submit(weekly_job ,'JOB;',
trunc(sysdate)+11/24,
'trunc(sysdate)+7+11/24' );
COMMIT;
Here I have added a 'distinct' in the same procedure but it doesnt like it,and it wont work.
BEGIN
dbms_job.submit(weekly_job ,'JOB;',
distinct(trunc(sysdate)+11/24),
'distinct (trunc(sysdate)+7+11/24)' );
COMMIT;
Does anyone know an alternative or solution?
Thanks,
Brian.

Brian,
Your answer can be found in the "PL/SQL Packages and Types Reference" at:
http://otn.oracle.com/pls/db10g/portal.portal_demo3?selected=3#index-SQL
In summary: exec dbms_job.remove(jobno);
But please download that doc and keep it handy. Grab the SQL Reference, PL/SQL Guide, and Application Developers Fundamentals while you're at it.
user_jobs is a data dictionary view (dba_, all_, user_, etc). You never, ever want to insert, update, or delete anything in the data dictionary. This includes dual. Want to destroy a database? Login as sys and delete from dual. Don't do it, just trust me.
Thanks,
Tyler

Job removing in Oracle 10g

Hi,
I am working in Oracle migration from 8 to 10g.
I have a procedure that remove all the jobs named as <job name>.It works in Oracle 8 but does not remove any job in Oracle 10g
The command is dbms_job.remove(i.job);
Any suggestion???

You can remove a job from the database by issuing a DROP_JOB statement, as in the following:
BEGIN
DBMS_SCHEDULER.DROP_JOB (
job_name => 'my_job1');
END;
and aslo you can use this
exec dbms_job.remove(24) ;
refer this link:
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14231/schedadmin.htm
Edited by: SKYNIAZI on Mar 26, 2009 10:34 AM

Launch a procedure every quarter of the Year

Hello:
I need to launch a procedure every first day of a quarter of the year (JAN-01, APR-01, JUL-01 and OCT-01) I know that there is a package, DBMS_JOB, but I have no idea how can I used it, plese some one of yours have an example. Thanks
Angel

USER_EXPORT Procedures
There are two overloaded procedures. The first produces the text of a call to re-create the given job. The second alters instance affinity (8i and after) and preserves the compatibility.
Syntax
DBMS_JOB.USER_EXPORT (
job IN BINARY_INTEGER,
mycall IN OUT VARCHAR2);
DBMS_JOB.USER_EXPORT (
job IN BINARY_INTEGER,
mycall IN OUT VARCHAR2,
myinst IN OUT VARCHAR2);
Parameters
Table 48-10 USER_EXPORT Procedure Parameter
Parameter Description
job Number of the job being run.
mycall Text of a call to re-create the given job.
myinst Text of a call to alter instance affinity.
WHAT Procedure
This procedure changes what an existing job does, and replaces its environment.
Syntax
DBMS_JOB.WHAT (
job IN BINARY_INTEGER,
what IN VARCHAR2);
Parameters
Table 48-11 WHAT Procedure Parameters
Parameter Description
job Number of the job being run.
what PL/SQL procedure to run.
Usage Notes
You must issue a COMMIT statement immediately after the statement.
Some legal values of what (assuming the routines exist) are:
'myproc(''10-JAN-82'', next_date, broken);'
'scott.emppackage.give_raise(''JENKINS'', 30000.00);'
'dbms_job.remove(job);'
Note:1. have start date hardcoaded 1st of next quarter and next date have it as ADD_MONTHS(trunc(sysdate,'q'),3) which is 1st day of every querter

DBMS_JOB.REMOVE procedure

Similar Messages

Maybe you are looking for