Jobs in dbms_job queues

How can I tell if a job is in a job queue? Also, how can I completely drop the job?
Thansk!

Assuming a DBMS_JOB job rather than a DBMS_SCHEDULER job, query DBA_JOBS (or USER_JOBS or ALL_JOBS depending on the situation).
You can prevent future executions of the job by using the DBMS_JOB.REMOVE procedure. If the job is currently executing, though, dropping the job doesn't stop that execution-- you'd have to kill the session (or wait for the current execution to finish).
Justin

Similar Messages

  • Schedule a job using dbms_job package

    SQL to schedule a job using DBMS_JOB.
    variable jobno number;
    variable status number;
    begin
    dbms_job.submit(:jobno, 'x(:status);', trunc(sysdate)+8/24,
    'trunc(sysdate)+1+8/24', null);
    commit;
    end;
    It fails and returns the following error ...
    ORA-01008: not all variables bound
    Is it possible to schedule a job to run a procedure with "IN OUT" parameter? I would appreciate any assistance.
    Proc runs if I execute it from command mode and there are no issues.

    You cannot pass parameters back from a job-- Oracle spawns a separate session to run your job, so that session would receive any OUT parameters and end immediately after the job finishes. Even if Oracle let you do this, you would lose the OUT value as soon as the job ended.
    If you want a job to return a status, you can-
    1) Store the status in a table
    2) Queue a status message in an Oracle Advanced Queue
    3) Use dbms_alert to alert another process
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Server Admin not showing jobs in print queue

    Hi All,
    I'm not sure if others are having this problem or if it's just me.  I am running Mac Server OS X 10.6.7  When I go to Server Admin and select "Print" and then "Job Status", I get a list of all the server's print queues.  In the pane below the list of queues, there is a section that says "Jobs on Queue:" which then allows me to select any specific print queue.  The problem is, no matter what queue I select, I am never able to see any of the print jobs going through the queue.  I have sent multiple jobs to different printers on the server, all while watching the "Jobs on Queue" window for the appropriate printer.  In every test, I have never seen ANY print job show up in that window, even though all the print jobs print out fine.  I have even tried pausing a printer to let jobs queue up, and still nothing shows up in that window.
    I have also tried the same tests while viewing the prints queues from the "Print & Fax" System Preferences pannel directly on the server.  Still no luck.  Everything prints out fine, but I am unable to ever see any print job hitting the queue.
    The reason I even noticed this problem is because a user accidentally printed a 500 page document by mistake.  The user called me to stop the job, but I was unable to see anything in the queue to kill.  I tried deleting the job directly from the printer, but this just caused the printer to lock up.  I would try powering off the printer and restarting it, but as soon as it powered back on, the print job would restart.  I even tried restarting the server, but as soon as the server came back online, the print job started again.  Finally, after hunting on the web, I tried logging into CUPS via http://localhost:631 and was able to see the print job listed there and finally delete it.
    Is there any way to monitor print jobs on the server in real time?  I found this previous archived thread describing what appears to the same problems using Mac Server OS X10.5.8, but there was never any solution listed before the thread was archived.
    https://discussions.apple.com/thread/2152737

    Is there anyone using printing services on a Mac server at all that could comment on whether or not you see the print jobs listed in the queue when printing?

  • Scheduling job using DBMS_JOB.SUBMIT()

    Hi people I hav esubmitted a job using DBMS_JOB.SUBMIT() package.I have set the time it should run after 5 minutes from the time i created.but now my question is how do we know the submitted job has been executed within specified interval?.am using oracle 9i.please suggest me.
    Regards
    VIDS

    You should refer to DBA_JOBS and DBA_JOBS_RUNNING views to get information about your jobs
    Please refer to this address to get more information about these views
    http://pandazen.wordpress.com/2007/12/19/oracle-job-to-be-continued/
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com

  • Print Job remains in queue even though it prints OK?

    Hello All,
    I am trying to help a friend of mine setup wireless printing from her Macbook. Unfortunately I don’t know very much about Macs and OSX but I am a quick learner
    The setup:
    Virgin Media Cable Modem -> connected (RJ45) to a Wireless Linksys Cable Modem -> connected (RJ45) to a Belkin USB Hub.
    From the USB hub I have two printers connected:
    1 x HP Deskjet
    1 x Samsung ML-2240 Laserjet
    Both these printers install to the Macbook perfectly as default USB devices (wirelessly) via the USB Hub. They also appear correctly in the Belkin USB Hub software console.
    The HP printer works perfectly every time it is used, no issues whatsoever. The Samsung printer prints ok the first time but the print jobs do not disappear from the print queue on the Macbook, the print job doesn’t appear to complete even though it has actually printed without any issue.
    The problem this causes is that after the first print job has been printed it is not possible to print again. Even if I delete the print job from the queue manually I cannot still not print a second time. The only way I can get the printer to print again is to unplug and then plug back in the USB cable that is connected to the USB Hub. When I unplug the cable the print job disappears from the queue on the Macbook. I can then reconnect the USB cable and connect to the printer and it will print again.
    I have made sure that I have the latest firmware on the Macbook which is running 10.5.* OSX. I have also installed the latest Firmware and Drivers on the Samsung Printer and the USB Hub.
    Is there a different way to setup the print queue that you think may help? Any ideas would be greatly appreciated. I spent 5 hours on this yesterday and it still isn’t working
    Thanks
    M

    It should bring up the Common UNIX Printing System (CUPS) 1.3.11 manual if you're running 10.5.8 (hint; 10.5 is meaningless). Since it doesn't, I suggest doing an Archive & Install installation, followed by running Software Update.
    P.S. http://discussions.apple.com/message.jspa?messageID=12477185 might give you some clues.

  • Random jobs stopping print queue

    I have 3 printers attached to my iMac via a USB hub, a canon i9100, an epson SP 220 and an epson SP 1800. I have experienced this with all of the printers, so I don't believe it is a problem with the printer software.
    Most of the time everything works perfectly. But approximately 10% of the time the document will just not print. I thought it might be something to do with InDesign, since 99% of the documents I print are from InDesign, but I have experienced the problem with TextEdit files, emails, web pages (camino and safari).
    There doesn't seem to be any particular cause. The job will queue up, and then all the sudden the printer will stop all jobs. The only way to get them started is to delete the job from the queue. The strangest part is that SOMETIMES reprinting the document will work fine, while other times it just continues to stop the print queue.
    Has anyone else experienced this problem? Or is it just a ghost in my machine.
    iMac 17 1GHz   Mac OS X (10.4.6)  

    It's possible that you have a corrupt font. That will stop a printer. Check the fonts you are using in a document that's causing problems, and maybe change the font, and see if it works. It's easier if you have a font check utility like suitcase.
    If you dont, maybe figure out what page of a document is causing the printer to stop. That will narrow the search.
    David

  • Schedule a job in dbms_job which should run first of every month at 14:00.

    Hi Gurus,
    I want to schedule a job in dbms_job which should run on first of every month at 14:00.
    Job will execute a stored procedure.
    With Regards,
    Gopal.

    gopal wrote:
    Hi Aman,
    My DB version is 10g but it was migrated from 9i fews weeks back.I'm aware that dbms_scheduler is very easy to use.I tried to use dbms_scheduler but the stored procedure which the job executing uses user_jobs and dba_jobs in the script to do some tasks.So, I have to use dbms_job option.
    Just as an FYI for future posts ... that could have been very useful information to know up front. It's very difficult to give good advice when someone sets seemingly arbitrary restrictions on what constitutes an acceptable solution (must use dba_jobs) with no explanation of the reason for said restrictions.
    I used trunc(LAST_DATE(SYSDATE) +1)+14/24 to schedule the job.
    Thanks Aman.. I follow your blog :)

  • Scheduling jobs via DBMS_JOB

    Hi,
    Can anyone please help me to schedule a job via DBMS_JOB.
    I have to execute a procedure p_upload_data from Tuesday to saturday at 1:00 AM.
    Please provide me the code that i can use.
    Thanks

    cofusracle wrote:
    Can anyone please help me to schedule a job via DBMS_JOB.Have a look at the Oracle® Database PL/SQL Packages and Types Reference manual
    I have to execute a procedure p_upload_data from Tuesday to saturday at 1:00 AM.
    Please provide me the code that i can use.Scheduling a job is as easy as follows:
    declare
      j number;
    begin
      DBMS_JOB.Sumbit(
        job => j, --// job id created for the job in USER_JOBS
        what => 'P_Upload_Data;', --// PL/SQL code block scheduled for execution
        next_date => sysdate, --// when to start executing the job (e.g. immediate)
        interval => 'trunc(sysdate+1)' --// function to use to calculate when next to execute the job (midnight each day)
      commit; --// the DBMS_JOB package updates the SYS.JOB$ table and changes need to be comitted
    end;I leave the interval calculation up to you to figure out.

  • Job to unblock queue

    Hi..
    I was looking at forums about a job to unblock queue, but i could find any result to resolve my problem.
    Particularly im interesting in a job that unblock queue in status = READY.
    any idea??
    Thanks & Regards
    RP.

    Hi Rodrigo,
    Jobs in status ready can't be deleted, if you have a job that is not running and have been in the queue with status ready for a long time check the status of the job, select the job or jobs from the Overview Job list and choose Job -> Check status. If nothing see to work, restart SAP, wen the system is restarted it look for jobs in startus active and ready and change them to scheduled.
    Hoep this help!
    Juan
    Please reward with points if helpful

  • HP 2540 all in one, job disapperar from queue, no print

    Hi guys, I bought a HP 2540 and I cant print anything, windows 8.1 64 bits.The printer is online and ready but the job disappear from queue after 1 second or I cant see them there. Just follow this article but still no luckhttp://support.hp.com/us-en/product/HP-Deskjet-2540-All-in-One-Printer-series/5295960/model/5295961/document/c04372450/ The test page was successfully printed. The behavior is the same with an usb cable or wireless. Thanks in advance.

    Tried that too:http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Deskjet-2540-not-printing/td-p/3526101 No luck with another drivers

  • Can I cancel mail job from SOST queue and make its status to be error or red

    Do you have any idea to cancel mail job from SOST queue and make its status to be error or red (msgno = 806) by using coding ??

    veekwall wrote:
    Hi,
    I recently (over this past summer) updated my phone and plan with Verizon.  I'm from Pittsburgh, Pennsylvania, and I got the phone in Pittsburgh.  It is a Droid Eris and very nice.  I got it and a month later I moved to Olympia, Washington for school.  Since moving there, I have hardly been able to use it.  The service is terrible and its been impossible to keep in touch with my family, I wasn't even able to call them over Thanksgiving.  I'm also having to pay extra money so I can use the internet on my phone, but I can't even access the internet let alone make phone calls.  It's really frustrating.  I can't use my phone to keep in touch with everyone in Pittsburgh-and if I am ever in trouble I wouldn't be able to call for help, which makes me really nervous.  Is there a way I can cancel my 2yr contract?  Yes.  Just visit a Verizon store, or dial *611 from your phone and let them know you would like to cancel your account.  Would I have to pay a fee-and how much would that cost? Yes, Verizon no longer waives ETFs due to moving to an area without service, so you will probably have to pay an Early Termination Fee.  Since you have a smartphone, it will probably be $350 less $10 for each month of service you have completed.  The Customer Service rep you contact about cancelling will be able to tell you the exact amount.  Would I have to go to the Verizon store I bought the phone from to do this or would I have to do this in Washington-where I am now living and having the problems? You can do it over the phone, or at a corporate Verizon store.  Help!
    -Victoria

  • HT204135 how to re print job from print queue listing on a mac?

    how to re print job from print queue listing on a mac?

    Hello there! Welcome to the forums @technolingua ,
    I read about how you are looking to print envelopes from Mavericks. I would suggest checking out the links below to help you out!
    Create envelopes by using Mail Merge
    Print Envelopes (Mac)
    How to Print Envelopes on a Mac
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Project server 2010: job stuck in queue with state Waiting to be Processed (Sleeping)

    Hi,
    I have a job in the queue that is stuck. The job type is "TimeSheet Update Resource" and the job state is "Waiting to be processed (Sleeping)". This is happening with only one user. Other users can edit, save, and submit timesheets normally as it appears.
    Can't figure out the problem! I tried restarting the queue and timer service with no success. Any suggestions much appreciated.
    Thanks,
    George

    Since you already identified issue is user specific, I think now you need to have a look in to ULS log to undestand really whats happening in the background.
    Try  editing the user from PWA>>>Server Settings>>Manager users
    Click on the user and without making any change click on save, monitor the queue
    Hrishi Deshpande – Senior Consultant DeltaBahn
    Blog | < |
    LinkedIn
    Please click Mark As Answer; if a post solves your problem or Vote As Helpful; if a post has been useful to you

  • Removing JOB From the Queue once executed

    How do you submit a job so that it runs only once and then gets removed from the Jobs Queue ?
    I am submitting a Job from a procedure and I want the job to be removed once it is run. Can the Procedure that is called in the DBMS_JOB.SUBMIT(...) call contain a line such as DBMS_JOB.REMOVE(JobID)? How will the procedure know what the JobID for that job is ?
    Thanks.

    Just don't specify a NEXT_DATE or INTERVAL (just use the first two arguments, JOB and WHAT) and that's exactly what will happen.
    Richard

  • Jobs stay in queue and keep printing until you cancel them--then stops the print spooler...why?

    My Printer: HP Photosmart C309a
    My  Laptop: HP G71 series
    Operating System: Windows 7 (64 bit) but runs a lot of stuff on 32 bit
    Problem: I print ONE copy of a multiple page document in Adobe Reader 9. I select even pages only (after which I would reinsert the pages and tell it to print odd pages only, to get the other side). The printer makes a sound indicating the job is finished, I remove my pages to collate them, and then the printer continues to print the job again without so much as a keystroke.
    Naturally, you find the printer in the devices on the control panel, click "see what's printing" and highlight the job and cancel it.
    Then somehow it turns off my print spooler. 
    I have tried everything suggested on other forums, like
    restart the laptop/restart the printer
    going to c\windows\system32\spool\printers and deleting whatever is hung up in there (usually a shockwave file).
    Going to Services\print spooler \properties and making sure the settings are set to automatic
    Uninstall\reinstall latest driver and software
    Switching from Adobe Reader 10 to Adobe Reader 9
    Use System Restore to try to reset the system to a previous state.
    Run Trend Micro to check for viruses and spyware--nothing shows up.
    I am positive the pdf doc is NOT the problem, because I can print it on my husband's laptop multiple times over with no problems.
    Does anyone have this problem as well? Has anyone found a genuine solution other than manually canceling print jobs in queue and constantly restarting the print spooler?
    Thanks in advance for any suggestions.
    --Holly

    Hi,
     I believe your printer is wirelessly connected to your computer, right?!
     What's the current printer software version installed in your laptop computer?! 
     to see: click start>control panel>uninstall a program under Programs then it will tell you the software version like HP Photosmart c309a v13 or v14.
    If the software version is v13, click here to download and install the current software.
    IF all things still fail, try to use the workaround provided by HP in this link. It says:
    Workaround
    Your HP printing product can operate sufficiently using an alternate print driver, although there might be some limitations. For instance, some buttons on the product control panel might not function, but the product prints normally from the computer. If the solutions in this document do not solve the issue, download and install an alternate print driver.
    Follow these steps to install the HP Deskjet 990C print driver.
      NOTE:  These steps install the new print driver using the same port that the product already uses. The product functions normally with multiple drivers on the same port.
    Find the port that the product already uses.
    Click the Windows icon ( ), and then click Control Panel . The Control Panel opens in a new window.
    Click Hardware and Sounds .
    Click Printers . The Printers folder opens.
    Right-click the product icon ( ), and then click Properties . The Propertieswindow opens.
    Click the Ports tab. A window opens with a list of ports. The port for the product has a checkmark or a highlight.
    Note the name of the port indicated for the product.
    Close the Properties window, and then continue with the next steps.
    Click Add a Printer in the menu bar at the top of the Printers window. The Windows Add Printer Wizard opens.
    Click Add a local printer .
    Select Use an existing Port .
    Click the drop-down menu next to Use an existing Port , and then select the port that you noted earlier in these steps.
    Click Next .
    In the Manufacturer pane, click HP .
    In the Printers pane, click HP Deskjet 990c , and then click Next . (IF YOU CANT FIND DESKJET 990C, JUST CLICK WINDOWS UPDATE WITHIN THIS WINDOW. THEN FIND DESKJET 990C and then click next)
    Type a name for the new printer in the Printer name box, or keep the default name.
    Select Set as the default printer , and then click Next . A window opens with a progress bar as the printer installs. Then a new window opens.
    Click Do not share this printer , and then click Next .
    If you want to print a test page, click the Print test page button.
    Click Finish to complete the driver installation.
    Try printing again, but select HP Deskjet 990c from the Print dialog box.
    If this solves the issue, follow these steps to use the HP Deskjet 990c print driver whenever you send print jobs to the product.
    In the program you are using, select the option to print. The Print dialog box opens.
    Click the Name drop-down menu, and then select HP Deskjet 990c .
    Change print settings as desired in the Paper size , Quality , and Paper type drop-down menus.
    Select the Print range and Copies options as desired.
    Click OK . The product prints the file.
    Kiko

Maybe you are looking for