Dbms_scheduler - how to stop a job in next run

HI All,
I have scheduled a job to run every 20 mins. Its a collection of procedures. During business hours, the scheduled job runs more than 1 hour because of this next cycle will be in queue, Once this cycle completes next wil be triggered in micro seconds.
I need to stop this JOb after completing the current cycle. I tried stop_job. I failed. Also I am not able to find the Job in scheduled state, due to above conditions. Its always in running state. I dont want to stop the current cycle forefully.
Maintenance window is running, I need to stop the Job after it completes current run.
Is it possible ? Can some one help me to achieve this.
Thanks

Thanks for the replies.
I already tried with dbms_scheduler.disable('name');
It failed due to running Job. I dont want do it forcefully due to business requirement. cycle shouldnt be killed.
stop_job - though I stop the next run. subsequent runs are in queue. job frequency is 20 mins. But job runs for 60 to 90 mins. because of this, many jobs which are in queue are kicked off one by one.
How to proceed ?

Similar Messages

  • How to stop the job which is running infinite time......

    Hi ,
    I created one procedure with the below code. Using dbms_scheduler i created one job and called that program. That job is in sleep mode for long time. How can i stop that job.
    create or replace procedure bpc_test_batch
    is
    begin
    dbms_lock(30000000)
    end;
    Regards,
    Thiru

    Have you tried this already?
    exec dbms_scheduler.stop_job('Your_Job_Name',true);

  • How to stop print job in SAP?

    Can some help in explaining how to stop print job in SAP .???
    i

    HI Swati,
    Thanks for the additional info. as per previously mentioned use SM37 - however be sure to check the box ''Sched' when performing the search for the job in question (and untick the others so the resulting list will be clearer to read etc.)
    You can then choose to delete the job and reschedule it to different periods via SM36
    Best of luck,
    Rgds, Derrick

  • How to stop Batch Jobs

    Hi Gurus,
             How to stop Batch Jobs
    Thanks
    Dave

    Dave
    You could cancel the Job in SM51 transaction. Choose your PID from SM51 and go to menu-->choose cancel without core. It takes some time to cancel the job completly.
    Please check this link
    how to cancel or change the background job which is scheduled
    Hope this helps
    Thnaks
    Sat

  • How to stop backup job on enterprise manager

    Hi
    I have a rman job on enterprise manager which takes backup of all the datafiles everyday.
    How can I temporaraly stop the job and resume later? The job hasnt started yet.
    Database is oracle 10g. operating system is unix
    regards

    If you stop it, it will not run again and you won't be able to reschedule it. Killing sounds like it will solve your problem.
    To kill:
    Once you click on the "Running" link next to the job_name, you should see these two links (the second one may take a few seconds to show up):
    Step: Prebackup
    Step: Backup
    Click on the "Step: Backup" hyperlink. There will be a "Kill Step" button at the top right corner.
    If you don't see it, you can also connect to the database itself and kill the RMAN SIDs. This should show the job's status as "Problems". You can then edit the "Scheduled" job that should have been created.
    As for the run tomorrow, make sure you delete the O/S files created by the killed job if they are still there and run "crosscheck backup" (from RMAN or Grid/Manage Backup). This will make sure RMAN doesn't skip any datafiles at the next run.

  • How to stop background job to print papers

    Hi all,
    I have background job of forms running every day and its printing papers. My requirement is to stop the printing of papers in the background job.
    How to do this .
    i am using CALL FUNCTION 'GET_PRINT_PARAMETERS and    NEW-PAGE PRINT ON PARAMETERS v_params NO DIALOG.
        NEW-PAGE PRINT OFF.
    Thanks
    Krupali

    Hi,
    <li>Set the below before you call NEW-PAGE PRINT ON
    lw_pripar-prrel = space.
    lw_pripar-primm = space.
    <li>Call NEW-PAGE PRINT ON like below
        NEW-PAGE PRINT ON
          NEW-SECTION
          PARAMETERS lw_pripar
          ARCHIVE PARAMETERS lw_arcpar
          NO DIALOG.
    Thanks
    Venkat.O

  • How to identify all jobs that were running at a particular point in time?

    TES 6.1.0.391
    From time to time, we have a need to identify all jobs that were running at a particular moment in time on a particular agent (we have about 800 agents)...eg "what was running ("Active") at 09:03:42 a.m. two days ago on agent XYZ?"
    I've used other job schedulers, and have written queries to extract that info, but I thought before I work on one for Tidal that I would ask the community....how are you getting this info?
    Any help is greatly appreciated, thanks.

    I had some time over the weekend and was able to come up with something of use.
    Please note that our repository is MSSQL
    select jobmst_prntname as ParentJobName,
    a.jobmst_prntid as ParentJobId,
    a.jobmst_id as JobId,
    a.jobdtl_id as JobDetailID,
    jobmst_name as JobName,
    b.owner_name as JobOwnerName,
    c.jobdtl_cmd as JobCommand,
    c.jobdtl_params as JobParameters,
    jobmst_lstchgtm as LastUpdateDate,
    d.nodlstmst_name as AgentListName
    ,[jobrun_status]
    ,[jobrun_duration]
    ,[jobrun_time] as starttime
    ,DATEADD(ss,jobrun_duration, jobrun_time) as endtime
    ,f.nodmst_name as AgentName
    ,[jobrun_owner]
    ,[jobrun_cmd]
    ,[jobrun_rundt]
    ,[jobrun_batch]
    ,[jobrun_params]
    ,[jobrun_launchtm]
    ,[jobrun_fullpath]
    from Admiral..jobmst a,
    Admiral.dbo.[owner] b,
    Admiral.dbo.jobdtl c,
    Admiral.dbo.nodlstms d,
    Admiral.dbo.jobrun e,
    [Admiral].[dbo].[nodmst] f
    where a.jobmst_owner=b.owner_id
    and a.jobdtl_id=c.jobdtl_id
    and c.nodlstmst_id=d.nodlstmst_id
    and e.jobmst_id=a.jobmst_id
    and e.nodmst_id=f.nodmst_id
    and jobmst_active='Y' --This condition shows only the active jobs
    and jobrun_rundt ='2014-01-26' --This is the job run date. If the job finishes the next day, that is what is going to be used.
    and f.nodmst_name = 'abc' --This is where you input your agent name
    Hope this helps!

  • How to find Background job which is running program RSWUWFML2

    Hi Experts, i am trying to find which background job is running standard program 'RSWUWFML2', anyone can help on this?

    Go to SM37. Put * in the Job name and user name. The enter the program name in the last field.
    this should give you the job scheduled or running.

  • How to stop the Job work orders to sub contractor failed to deliver goods?

    Dear friend,
    If  a job work vendor didn't deliver the goods in the stipulated time say 50 days this vendor to be stopped for further job work orders.  Each and every order follow's the abover rule.  How to configure the sap? Manual blocking not required. Automatic blocking is required.
    Regards,
    TS.
    Edited by: tadavarty srinivas on Feb 21, 2008 6:15 AM

    u nee to take help of source list but the thing is then system will not allow you to issue any type of po to this vendor
    to achive this
    stpe1 : activate source list at plant level(as u mentioned it has to be for all the vendors)
    step 2: create a source list for all the material (externaly procured material or sub contracter) 
    step 3:  mark the BLK check box in front of that vendor 
                                    or
    JUST BLOCK THAT PARTICULAR VENDOR USING TCODE XK05

  • How to stop IDoc jobs?

    Dear Sir,
      We transfered master data from PRD to QAS by ALE. Since the data is huge, I cease the process on PRD but there were already many IDocs received by QAS. It seems fork many...many...many jobs to deal with these Idocs and they occupied all the background processes to process IDoc. So, when we  schedule new jobs and transport change request through STMS, all of these will queued. I deleted all jobs I can see related to RBDAPP01, but in vain, new jobs for IDocs will produce again. Any advice will be appreciate!!
    Warm Regards,

    Hi,
    Try this to stop the active job any further.
    Goto SM37, select the job under concern which is in released state and slect Job->Change from the menu bar. Then from the next screen, click on "Start Condition" from the application toolbar. Under the Data/Time criteria, against "No start After" field, fill in the date and time a few mins ahead of the system time. This ensures that the job is not executed after this system time.
    ~ Bineah.

  • How to stop broadcasted jobs

    Hello Experts,
    We have to stop the broadcasted jobs and un schedule the jobs for the time being.
    How to unchedule the broadcasting jobs?
    Thanks in advance,
    Venkay

    Hi,
    I checked in RSRD_ADMIN, then I have to go to setting and un schedule the job individually. But i want to unschedule the process chain/job and stop the broadcasting jobs all at once.
    do you know any proecess?
    Thanks,
    Venky

  • How to stop auto play to next song?

    I was wondering if there is a pref or option that will prevent iTunes from playing the next song on the list so that once the selected song is finished, iTunes will NOT play the next song? Thanks in advance for your help!

    The only way I know of is to uncheck all the tracks. Tunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. To uncheck all the tracks, control-click on any checkbox and it will select or unselect them all.

  • How to stop spool jobs?

    Hi,
    I want to stop spool , from getting into SP01 and from printing.
    I checked one pf the threads from SDN.
    DATA: print_parameters TYPE pri_params.
    print_parameters-PRIMM = ''.
    print_parameters-PDEST  = 'LOCL'.
    print_parameters-PRNEW = 'X'.
    SUBMIT RCATSTCO TO SAP-SPOOL
                        SPOOL PARAMETERS print_parameters .
    But this still doesnt stop putting data into Spool and print. Program will be scheduled in batch.
    Regards
    Mohinder Singh Chauhan

    thanks

  • How to stop the TR which has run a long time

    Hi,
    I released a TR, but the system import it a long time. I think maybe have a problem with it.
    I want to stop the import job of the TR. How can I do for that?
    jk

    hi,
    Q: How to kill a long running job in SAP.
    Answer
    You can 'kill' your own long running jobs by doing the following.
    Open a new SAP session.
    In the new session, from the SAP R/3 screen, follow the menu path: Tools>>Administration
    (new screen) Monitoring >>System monitoring>>User overview
    Fastpath:  /nsm04
    Result: the "Overview of Users" screen appears. This is a list of the jobs currently running.
    Find your username in the list and click on it
    Click on the Sessions button .
    Result: the Overview of Sessions screen appears.
    Click on the End session button .
    hi, ask your BASIS people for killing the job..
    regards
    vijay

  • How to stop voice over utility from running

    Accidentally activated voice over utility and now I can get it to stop running, despite uninstalling it.

    Hello Stixs424,
    Thanks for using Apple Support Communities.
    To turn off VoiceOver please follow the directions below.
    You can turn VoiceOver on and off at any time; you don’t have to restart your Mac or log in again.
    Press Command-F5. If VoiceOver is on, pressing Command-F5 turns it off.
    VoiceOver Utility (Mountain Lion): Turn VoiceOver on and off
    Cheers,
    Alex H.

Maybe you are looking for