How to stop backup job on enterprise manager

Hi
I have a rman job on enterprise manager which takes backup of all the datafiles everyday.
How can I temporaraly stop the job and resume later? The job hasnt started yet.
Database is oracle 10g. operating system is unix
regards

If you stop it, it will not run again and you won't be able to reschedule it. Killing sounds like it will solve your problem.
To kill:
Once you click on the "Running" link next to the job_name, you should see these two links (the second one may take a few seconds to show up):
Step: Prebackup
Step: Backup
Click on the "Step: Backup" hyperlink. There will be a "Kill Step" button at the top right corner.
If you don't see it, you can also connect to the database itself and kill the RMAN SIDs. This should show the job's status as "Problems". You can then edit the "Scheduled" job that should have been created.
As for the run tomorrow, make sure you delete the O/S files created by the killed job if they are still there and run "crosscheck backup" (from RMAN or Grid/Manage Backup). This will make sure RMAN doesn't skip any datafiles at the next run.

Similar Messages

  • How to stop print job in SAP?

    Can some help in explaining how to stop print job in SAP .???
    i

    HI Swati,
    Thanks for the additional info. as per previously mentioned use SM37 - however be sure to check the box ''Sched' when performing the search for the job in question (and untick the others so the resulting list will be clearer to read etc.)
    You can then choose to delete the job and reschedule it to different periods via SM36
    Best of luck,
    Rgds, Derrick

  • How could I check whether Oracle Enterprise Manager is installed or not ?

    Customer uses Oracle DB 11g.
    How could I check whether Oracle Enterprise Manager is installed or not ?

    If you are using EM DB Control then you run this command,
    $ORACLE_HOME/bin/emctl status dbconsole
    HTH
    Mani

  • How to stop Batch Jobs

    Hi Gurus,
             How to stop Batch Jobs
    Thanks
    Dave

    Dave
    You could cancel the Job in SM51 transaction. Choose your PID from SM51 and go to menu-->choose cancel without core. It takes some time to cancel the job completly.
    Please check this link
    how to cancel or change the background job which is scheduled
    Hope this helps
    Thnaks
    Sat

  • Schedule Backup on Oracle Enterprise Manager 10g

    Hello All,
    I am using Oracle enterprise manager 10g for schedule backup, i enter the user and password of operating system (windows XP) in Host Credentials part, but it return this error:
    Connection to host as user khazaei failed: IOException in sending Request :: Connection refused: connect
    khazaei is my windows username ,
    any one can help me?
    thanks in advance,
    Hamzeh Khazaei

    You need to add khazaei to the Local Security Policy "Logon as Batch Job". if you have already done so and you have logged on to a Domain, then add the domain to the username. e.g domain_name\khazaei.
    BTW - you can get faster response to this issue in the EM forum
    Enterprise Manager

  • Backup problems from Enterprise Manager Database control

    I'm having a problem with performing backups from EM DB Control on two of my Oracle 10g 10.2.0.4 systems. When I configure and submit any backup job from EM (either online or offline), the following happens:
    - When the job is due to run a Pre backup task has status of 'Scheduled'
    - Prebackup task completes and status changes to 'Succeeded'
    - Backup task appears with status of 'Scheduled' and value of started time within the next minute
    - Status of backup task never changes from 'Scheduled', and the started time keeps updating to the current time
    - This goes on indefinitely until I abort the job
    At the moment I have scheduled tasks configured to run an RMAN job every night, but I need to get this working through Enterprise Manager Database control. Please help!
    Something else which has happended on one of these systems is that after applying some Microsoft Critical updates the database control service would not start. The only way I could find to resolve this was to recreate the Enterprise Manager repository. Could there be a link here at all?
    Cheers,
    Strak

    I think Rodney may have the cause, because the database has been copied. I have looked in every property file I can think of, and then all the rest anyway, and there is no reference to the old host name. And I have ralready e-installed EM using emca -config -dbcontrol db. And I'm definately on the correct port.
    So it must be held internally in the database. I've seen partial instructions on deleting the EM repository in the database & java files, does anyone have a full set I can use ? Once that is done, does emca reinstall everything ?
    Many thanks, Duncan

  • Suspend job in Enterprise Manager

    Hi everybody.
    I have a problem with my oracle enterprise manager jobs. I schedule a job with rman commands for my database backups and it works fine every day, but sometimes, like yesterday, Oracle enterprise manager shows a message with "Trabajo Suspedido" (suspend job). I delete the job and I recreate again, but the job again is suspend.
    Anyone can help me?

    The alert log in 10g has format like this:
    $ORACLE_BASE/admin/<DBname>/bdump/alert_<SID>.log
    It usually records basic job actions, that's why I asked for it.
    I'm not sure, but would be good to check if the job suspended due to exceeded schedule window.
    There is also option to resume a suspended jobs.
    Also you may try to query:
    select to_char(log_date, 'DD-MM-YY HH24:MI:SS') as LOG_DATE, OWNER, JOB_NAME, JOB_CLASS, OPERATION, STATUS, USER_NAME
    from DBA_SCHEDULER_JOB_log
    order by 1;
    and
    select owner, JOB_NAME, PROGRAM_NAME, JOB_ACTION, schedule_name, to_char(start_date, 'DD-MM-YY HH24:MI:SS') as START_DATE, REPEAT_INTERVAL, enabled, state, comments
    +from DBA_SCHEDULER_JOBS --+
    where job_name like '%<place_you_jobname>%';
    to find more details and analyze history of those events.

  • How to stop the job which is running infinite time......

    Hi ,
    I created one procedure with the below code. Using dbms_scheduler i created one job and called that program. That job is in sleep mode for long time. How can i stop that job.
    create or replace procedure bpc_test_batch
    is
    begin
    dbms_lock(30000000)
    end;
    Regards,
    Thiru

    Have you tried this already?
    exec dbms_scheduler.stop_job('Your_Job_Name',true);

  • How to periodic backup job for Hana Studio

    Dear Hana Gurus,
    I want to make periodic backup job in Hana Studio, how can i do that ? I can backup in Hana studio easly, but i couldnt find job backup
    Best Regards

    And clearly you couldn't find the search functionality here in SCN.
    This question had been asked, discussed and answered often enough.
    It's even documented.
    Please: do your homework - due diligence.
    Thanks for following The SCN Rules of Engagement.

  • Dbms_scheduler - how to stop a job in next run

    HI All,
    I have scheduled a job to run every 20 mins. Its a collection of procedures. During business hours, the scheduled job runs more than 1 hour because of this next cycle will be in queue, Once this cycle completes next wil be triggered in micro seconds.
    I need to stop this JOb after completing the current cycle. I tried stop_job. I failed. Also I am not able to find the Job in scheduled state, due to above conditions. Its always in running state. I dont want to stop the current cycle forefully.
    Maintenance window is running, I need to stop the Job after it completes current run.
    Is it possible ? Can some one help me to achieve this.
    Thanks

    Thanks for the replies.
    I already tried with dbms_scheduler.disable('name');
    It failed due to running Job. I dont want do it forcefully due to business requirement. cycle shouldnt be killed.
    stop_job - though I stop the next run. subsequent runs are in queue. job frequency is 20 mins. But job runs for 60 to 90 mins. because of this, many jobs which are in queue are kicked off one by one.
    How to proceed ?

  • How to find backup job

    In Oracle 11g2, how can I find jbackup obs configured through OEM. I want to find out the job steps, commands, and status (failed or succeeded). These are not seen in V$RMAN_BACKUP_JOB_DETAILS and V$RMAN_BACKUP_SUBJOB_DETAILS. There are field COMMAND_ID in these view, but how to join these to find the actual commands.
    Thanks

    Hi,
    how can I find jbackup obs configured through OEMfrom Home page -> maintanance -> backup reports -> here you can find all the backup jobs.
    and check in
    select * from v rman_backup_job_details;Thanks

  • How to connect 10g database through Enterprise manager???

    Hi All,
    I want to connect the database through Enterprise manager.
    My database is on 10g. Version is 10.1
    Please tell me the procedure to connect the database through E.M.
    Thanks and Regards,
    Prathamesh.

    Are you thinking of the Enterprise Manager supplied with Oracle9i? If yes - it doesn't work quite that way ... and the 9i java OEM is not compatible.
    Use the enterprise manager supplied with the 10g database, called the dbconsole (look for a service or start it using 'emctl start dbconsole') and access it using http://{localhost}:5500/em
    If that doesn't satisfy you, load the updated version of the OEM 9i java standalone from the 10g client disk.

  • OEM ERROR: Run backup job from Enterprise Maneger failed

    After configuring backup policy on my database by means of OEM console (Oracle 9.2, OEM 9.2.0.1) scheduled job failed. Job Output show:
    "Could Not Find C:\WINNT\TEMP\3212132705.44]" (square bracket at the end of filename). This file (without bracket) exist and contain rman's script.
    But how can I force OEM (or RMAN or other product) remove last square bracket!

    I had the same problem of not discovering nodes and teh problem escalated to a point that jobs remained in "submitting" or "deleting" status. I couldn't delete nodes becuase jobs were dependent on it, and couldn't delete jobs because the node was manually configures.
    The following steps are by trial and error and got me back to a working status where nodes are discovered. Try them at your own risk :)
    Oracle Agent doens't seem to like changing IPs... if your machine IP has changed do the following:
    1. Stop the Agent service (under control panel)
    2. under Oracle's folder, ora92/network/agent, backup all the .q and .ora files and delete them. If it does not allow you to delete, disable the Agent service, reboot the computer and try to delete them
    3. Start the agent service (if you had disabled it, change the startup back to "automatic"
    4. I dropped the OEM repository and recreated it. Not sure if it helped or not, you can do the same or just go ahead and start OMS.
    Hope it helps, again, no garantee this works. It did work on my computer.

  • How to stop the Job work orders to sub contractor failed to deliver goods?

    Dear friend,
    If  a job work vendor didn't deliver the goods in the stipulated time say 50 days this vendor to be stopped for further job work orders.  Each and every order follow's the abover rule.  How to configure the sap? Manual blocking not required. Automatic blocking is required.
    Regards,
    TS.
    Edited by: tadavarty srinivas on Feb 21, 2008 6:15 AM

    u nee to take help of source list but the thing is then system will not allow you to issue any type of po to this vendor
    to achive this
    stpe1 : activate source list at plant level(as u mentioned it has to be for all the vendors)
    step 2: create a source list for all the material (externaly procured material or sub contracter) 
    step 3:  mark the BLK check box in front of that vendor 
                                    or
    JUST BLOCK THAT PARTICULAR VENDOR USING TCODE XK05

  • How to stop background job to print papers

    Hi all,
    I have background job of forms running every day and its printing papers. My requirement is to stop the printing of papers in the background job.
    How to do this .
    i am using CALL FUNCTION 'GET_PRINT_PARAMETERS and    NEW-PAGE PRINT ON PARAMETERS v_params NO DIALOG.
        NEW-PAGE PRINT OFF.
    Thanks
    Krupali

    Hi,
    <li>Set the below before you call NEW-PAGE PRINT ON
    lw_pripar-prrel = space.
    lw_pripar-primm = space.
    <li>Call NEW-PAGE PRINT ON like below
        NEW-PAGE PRINT ON
          NEW-SECTION
          PARAMETERS lw_pripar
          ARCHIVE PARAMETERS lw_arcpar
          NO DIALOG.
    Thanks
    Venkat.O

Maybe you are looking for