Dbx: internal warning: Unable to get fun table addr in librtc.so
Hi
I am trying to resolve a memory leak in my program.
getting the following errors:
leaks checking - ON
RTC: Enabling Error Checking...
dbx: internal warning: Unable to get fun table addr in librtc.so
dbx: Error checking initialization failed. All error checking disabled.
dbx: warning: Error checking initialization failed.
followed the following steps.
1. setenv LD_PRELOAD /opt/SUNWspro/lib/librtc.so
2. Ran the program. the program forks a child process.
3. Attached to the child process.
4. issued check -leaks, results in following error.
Attached to process 13954
stopped in _read at 0xfeb9e880
0xfeb9e880: _read+0x0008: ta 0x8
dbx: internal warning: set_error_limit called too early
(dbx) check -leaks
leaks checking - ON
RTC: Enabling Error Checking...
dbx: internal warning: Unable to get fun table addr in librtc.so
dbx: Error checking initialization failed. All error checking disabled.
dbx: warning: Error checking initialization failed.
(dbx)
dbx version:
Sun Dbx Debugger 7.1 Patch 112758-02 2003/11/12
System Info
Operating System: SunOS Release 5.8 Generic_117350-04
Type:SUNW, UltraAX-i2; sparc; sun4u
Any hints welcome.
Thanks
Bhaskar Mathur
Replied
Rose
Similar Messages
-
I am unable to get ADF TABLE PAGINATION in ORACLE 11 G
hi,
I searched a lot for displaying a ADF TABLE WITH PAGINATION using ORACLE 11G only.
I dont want to interact with the Database.
it may be any kind of ADF TABLE
I need a sample like ,
public List getData(){
List al=new ArrayList();
al.add("test1"); al.add("test2"); al.add("test3");...........
return al;
jsp
===
in jsp i want to display that list with PAGINATION. (no database interaction)
(next, previous options)
ex: if i give 3 rows it should display only 3 rows with next and previous.
following that sample i can implement in my application
thanks in advance.
regards,
sandeepSome examples here:
http://andrejusb.blogspot.com/2011/05/oracle-adf-11g-custom-table-pagination.html
http://www.adftips.com/2010/10/adf-ui-pagination-first-previous-next.html
http://connotea.org/user/jdeveloper/tag/pagination -
Studio 12 DBX internal error while memcheck is on.
bash-3.00$ dbx -xexec32
For information about new features see `help changes'
To remove this message, put `dbxenv suppress_startup_message 7.6' in your .dbxrc
(dbx) -rwxr-xr-x 1 orbit osgrp1 1.2M Dec 26 17:18 <my_processnmae>
-rwxr-xr-x: not found
(dbx) dbxenv mt_sync_tracking off
(dbx) attach 6792 <this is pid>
Reading <my_processname>
Reading ld.so.1
Reading librtc.so
Reading libmapmalloc.so.1
Reading libcurses.so.1
Reading libnsl.so.1
Reading libsocket.so.1
Reading libelf.so.1
Reading libcrypt_i.so.1
Reading libpthread.so.1
Reading libdl.so.1
Reading librt.so.1
Reading libc.so.1
Reading libgen.so.1
Reading libaio.so.1
Reading libmd5.so.1
Reading libc_psr.so.1
Reading library_name**
Reading library_name**
Attached to process 6792 with 3 LWPs
t@1 (l@1) stopped in soaccept at 0xff040314
0xff040314: soaccept+0x0004: ta %icc,0x00000008
Current function is Tcp_receive
284 if ((th_data->sockfd = accept (sockfd, (struct sockaddr *)&clientaddr,&length)) == -1)
(dbx) check -access
access checking - ON
RTC: Enabling Error Checking...
RTC: Running program...
(dbx) cont
RTC: internal RTC error -- disabling Error Checking file: rtc_heap_map.c line: 697
^Ct@2 (l@2) signal INT (Interrupt) in ___sigtimedwait at 0xff040220
0xff040220: ___sigtimedwait+0x0004: ta %icc,0x00000008
Current function is sig_thr
1256 sigwait (&glb_sigact, &signal_alr);
(dbx) version
Machine hardware: sun4u
OS version: 5.10
Processor type: sparc
Hardware: SUNW,Sun-Fire-280R
The following components are installed on your system:
Sun Studio 12
Sun Studio 12 C Compiler
Sun Studio 12 C++ Compiler
Sun Studio 12 Tools.h++ 7.1
Sun Studio 12 C++ Standard 64-bit Class Library
Sun Studio 12 Garbage Collector
Sun Studio 12 Fortran 95
Sun Studio 12 Debugging Tools (including dbx)
Sun Studio 12 IDE
Sun Studio 12 Debugger GUI
Sun Studio 12 Performance Analyzer (including collect, ...)
Sun Studio 12 X-Designer
Sun Studio 12 VIM editor
Sun Studio 12 XEmacs editor
Sun Studio 12 Performance Library
Sun Studio 12 LockLint
Sun Studio 12 Building Software (including dmake)
Sun Studio 12 Documentation Set
Sun Studio 12 /usr symbolic links and GNOME menu item
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/cc": Sun C 5.9 SunOS_sparc 2007/05/03
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/CC": Sun C++ 5.9 SunOS_sparc 2007/05/03
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/f90": Sun Fortran 95 8.3 SunOS_sparc 2007/05/03
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/dbx": Sun Dbx Debugger 7.6 SunOS_sparc 2007/05/03
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/analyzer": Sun Analyzer 7.6 SunOS_sparc 2007/05/03
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/dmake": Sun Distributed Make 7.8 SunOS_sparc 2007/05/03
any Idea ?
am i doing something wrong here. ? I want to check memory leak. ?
-RaxitWith hope if its bug, below may helpful.
(dbx) (dbx) (dbx) quit
detaching from process 6792
dbx: internal warning: function (__rtc_release_heap_region) called too early (preloading)
t@3 (l@3) signal SEGV (no mapping at the fault address) in _sleep at 0xff0330f0
0xff0330f0: _sleep+0x0078: ldsb [%o3 - 3005], %o2
Current function is scansessionisam_thr
1362 sleep (cfg_sec_shm_scantime); /*SCF no 10750 */
execution completed, exit code is 4982056
dbx: internal warning: rtc: _syscall: failed
dbx: warning: librtc.so and dbx version mismatch; Error checking disabled
Check your installation of librtc.so.
dbx: internal warning: rtc: munmap of patch area of segment '/usr/lib/libmapmalloc.so.1' failed
dbx: internal error: signal SIGSEGV (no mapping at the fault address)
dbx's coredump will appear in /tmp
ls -lrAbort (core dumped)
bash-3.00$ pstack /tmp/core
core '/tmp/core' of 6794: dbx -xexec32
ff1c0f90 lwpkill (6, 0, ff1a4a98, ffffffff, ff1e8284, 6) + 8
ff13ff98 abort (0, 1, 377d74, a83f0, ff1eb298, 0) + 110
000b5bf8 ???????? (b, 3c4400, 4575a1, 38b1f4, 37eabe, 1)
ff1bfec8 __sighndlr (b, ffbff408, ffbff150, b59ec, 0, 1) + c
ff1b4ff4 call_user_handler (b, 0, 8, 0, ff252000, ffbff150) + 3b8
001aef98 __1cGRtcMgrShandle_proc_detach6M_v_ (47d670, 5dd2a8, 38, 396000, 4c0498, 38) + d8
0018f850 __1cEProcGdetach6Mbbbb_v_ (4c0468, 467400, 466400, 0, 3ae2ac, 0) + 19c
000b8c68 ???????? (47e6f8, 0, 0, 0, 0, 1)
00289d94 __1cMpdksh_c_exit6FpnGInterp_ippcpv_i_ (47e6f8, 0, 876890, 0, 0, 466000) + a8
0015fbf4 ???????? (47e6f8, 1, 876890, 0, 877b78, 0)
002857a0 ???????? (47e6f8, 877b78, 877b58, 876890, 0, 467708)
0028468c __1cNpdksh_execute6FpnGInterp_pnCop_i_i_ (47e6f8, 49bab8, 0, 277c50, 47e6f8, 38b1f4) + 194
002735e0 __1cLpdksh_shell6FpnGInterp_pnGSource__i_ (47e6f8, 49e098, 465628, 446f54, 3d9625, 3d962c) + 46c
000b90d4 __1cNmain_cmd_loop6FpnGInterp__v_ (47e6f8, 37f400, 3ca2a4, 446f70, 3ca000, 3ca000) + 88
000b9e60 main (37e400, 0, 40, 47e6f8, 37f7c8, 1) + 750
000af268 _start (0, 0, 0, 0, 0, 0) + 108
bash-3.00$
bash-3.00$ dbx /opt/SunStudio12/
SUNWspro/ uninstall_Sun_Studio_12.class
bash-3.00$ dbx /opt/SunStudio12/SUNWspro/bin/dbx /tmp/core
For information about new features see `help changes'
To remove this message, put `dbxenv suppress_startup_message 7.6' in your .dbxrc
Reading dbx
core file header read successfully
Reading ld.so.1
Reading libintl.so.1
Reading libnsl.so.1
Reading libsocket.so.1
Reading libdl.so.1
Reading libgen.so.1
Reading libw.so.1
Reading libm.so.1
Reading libc.so.1
Reading libc_psr.so.1
Reading libcpc.so.1
Reading libpctx.so.1
Reading libnvpair.so.1
Reading libdevinfo.so.1
Reading libproc.so.1
Reading librtld_db.so.1
Reading libelf.so.1
Reading libctf.so.1
program terminated by signal ABRT (Abort)
0xff1c0f90: __lwp_kill+0x0008: bcc,a,pt %icc,__lwp_kill+0x18 ! 0xff1c0fa0
(dbx) threads
dbx: thread related commands not available
(dbx) where
=>[1] __lwp_kill(0x0, 0x6, 0x0, 0x6, 0xfc00, 0x0), at 0xff1c0f90
[2] raise(0x6, 0x0, 0xff1a4a98, 0xffffffff, 0xff1e8284, 0x6), at 0xff15fd78
[3] abort(0x0, 0x1, 0x377d74, 0xa83f0, 0xff1eb298, 0x0), at 0xff13ff98
[4] 0xb5bf8(0xb, 0x3c4400, 0x4575a1, 0x38b1f4, 0x37eabe, 0x1), at 0xb5bf8
[5] __sighndlr(0xb, 0xffbff408, 0xffbff150, 0xb59ec, 0x0, 0x1), at 0xff1bfec8
---- called from signal handler with signal 11 (SIGSEGV) ------
[6] RtcMgr::handle_proc_detach(0x47d670, 0x5dd2a8, 0x38, 0x396000, 0x4c0498, 0x38), at 0x1aef98
[7] Proc::detach(0x4c0468, 0x467400, 0x466400, 0x0, 0x3ae2ac, 0x0), at 0x18f850
[8] 0xb8c68(0x47e6f8, 0x0, 0x0, 0x0, 0x0, 0x1), at 0xb8c68
[9] pdksh_c_exit(0x47e6f8, 0x0, 0x876890, 0x0, 0x0, 0x466000), at 0x289d94
[10] 0x15fbf4(0x47e6f8, 0x1, 0x876890, 0x0, 0x877b78, 0x0), at 0x15fbf4
[11] 0x2857a0(0x47e6f8, 0x877b78, 0x877b58, 0x876890, 0x0, 0x467708), at 0x2857a0
[12] pdksh_execute(0x47e6f8, 0x49bab8, 0x0, 0x277c50, 0x47e6f8, 0x38b1f4), at 0x28468c
[13] pdksh_shell(0x47e6f8, 0x49e098, 0x465628, 0x446f54, 0x3d9625, 0x3d962c), at 0x2735e0
[14] main_cmd_loop(0x47e6f8, 0x37f400, 0x3ca2a4, 0x446f70, 0x3ca000, 0x3ca000), at 0xb90d4
[15] main(0x37e400, 0x0, 0x40, 0x47e6f8, 0x37f7c8, 0x1), at 0xb9e60
(dbx)
-Raxit -
ORA-20079: WM internal error [unable to rename table]
Hi,
I am getting following error when i try to enable versioning on a table. Any idea how to resolve it ?
BEGIN DBMS_WM.EnableVersioning('TestTable'); END;
ERROR at line 1:
ORA-20079: WM internal error [unable to rename table]
ORA-06512: at "SYS.LTDDL", line 1615
ORA-06512: at "SYS.LTDDL", line 1193
ORA-06512: at "SYS.LT", line 647
ORA-06512: at "SYS.LT", line 8024
ORA-06512: at line 1
thanks
-naHi,
You need to determine the original error that is being generated by oracle. This can be done by attempting to rename the table yourself. For example:
SQL> alter table TestTable rename to RenamedTable ;
That will give you a better understanding as to why Workspace Manager is unable to rename the table. Also, what version of the database and workspace manager are you using ?
If the direct rename succeeds while enableversioning continues to fail, then you would need to file a TAR on this.
Regards,
Ben -
Unable get the table scroll for table control
hai
i unable get horizontal scrolling for table control when the output is dislayed
help me
very urgentHi,
check out the sample program it might help you
See the following simple ex
*& Module pool ZTEST_TBLCTRL
PROGRAM ZTEST_TBLCTRL.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'TC1'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES: ZFG_SRNO, ZFIH0004.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'TC1'
*TYPES: BEGIN OF T_TC1,
ZSRNO LIKE ZFG_SRNO-ZSRNO,
SCRNAME LIKE ZFIH0004-SCRNAME,
END OF T_TC1.
*TYPES: BEGIN OF T_TC1.
STRUCTURE ZFG_SRNO.
END OF T_TC1.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'TC1'
*DATA: G_TC1_ITAB TYPE T_TC1 OCCURS 0 WITH HEADER LINE,
G_TC1_WA TYPE T_TC1. "work area
DATA: G_TC1_ITAB LIKE ZFG_SRNO OCCURS 0 WITH HEADER LINE,
G_TC1_WA LIKE G_TC1_ITAB. "work area
DATA: G_TC1_COPIED. "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'TC1' ITSELF
CONTROLS: TC1 TYPE TABLEVIEW USING SCREEN 0100.
*&SPWIZARD: LINES OF TABLECONTROL 'TC1'
DATA: G_TC1_LINES LIKE SY-LOOPC.
DATA: OK_CODE LIKE SY-UCOMM,
S_CODE LIKE SY-UCOMM,
MARK.
DATA: T1(10).
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE TC1_INIT OUTPUT.
IF G_TC1_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'ZFG_SRNO'
*&SPWIZARD: INTO INTERNAL TABLE 'g_TC1_itab'
SELECT * FROM ZFG_SRNO
INTO CORRESPONDING FIELDS
OF TABLE G_TC1_ITAB.
G_TC1_COPIED = 'X'.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
IF T1 <> SPACE.
G_TC1_ITAB-ZSRNO = T1.
CLEAR T1.
APPEND G_TC1_ITAB.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
ENDIF.
*TC1-TOP_LINE = 1.
ENDIF.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE TC1_MOVE OUTPUT.
MOVE-CORRESPONDING G_TC1_WA TO ZFG_SRNO.
if sy-subrc ne 0.
*append G_TC1_WA to G_TC1_ITAB.
*endif.
READ TABLE G_TC1_ITAB INDEX TC1-CURRENT_LINE.
IF SY-SUBRC = 0.
G_TC1_WA-ZSRNO = G_TC1_ITAB-ZSRNO.
ENDIF.
MOVE-CORRESPONDING G_TC1_ITAB TO ZFG_SRNO.
REFRESH CONTROL 'TC1' FROM SCREEN '8001'.
*******Below line is the logic for scrolling.
tc1-lines = G_TC1_LINES + 100.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: GET LINES OF TABLECONTROL
MODULE TC1_GET_LINES OUTPUT.
G_TC1_LINES = SY-LOOPC.
ENDMODULE.
*&SPWIZARD: INPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MODIFY TABLE
MODULE TC1_MODIFY INPUT.
*break-point.
MOVE-CORRESPONDING ZFG_SRNO TO G_TC1_ITAB.
MODIFY G_TC1_ITAB INDEX TC1-CURRENT_LINE.
G_TC1_COPIED = 'X'.
REFRESH CONTROL 'TC1' FROM SCREEN '8001'.
MOVE-CORRESPONDING ZFG_SRNO TO G_TC1_WA.
MODIFY G_TC1_ITAB
FROM G_TC1_WA
INDEX TC1-CURRENT_LINE.
G_TC1_COPIED = 'X'.
if sy-subrc ne 0.
append G_TC1_WA to G_TC1_ITAB.
endif.
*modify G_TC1_ITAB INDEX TC1-CURRENT_LINE.
ENDMODULE.
*&SPWIZARD: INPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: PROCESS USER COMMAND
MODULE TC1_USER_COMMAND INPUT.
OK_CODE = SY-UCOMM.
PERFORM USER_OK_TC USING 'TC1'
'G_TC1_ITAB'
'FLAG'
CHANGING OK_CODE.
SY-UCOMM = OK_CODE.
ENDMODULE.
INCLUDE TABLECONTROL_FORMS *
*& Form USER_OK_TC *
FORM USER_OK_TC USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME
CHANGING P_OK LIKE SY-UCOMM.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA: L_OK TYPE SY-UCOMM,
L_OFFSET TYPE I.
&SPWIZARD: END OF LOCAL DATA----
*&SPWIZARD: Table control specific operations *
*&SPWIZARD: evaluate TC name and operations *
SEARCH P_OK FOR P_TC_NAME.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
L_OFFSET = STRLEN( P_TC_NAME ) + 1.
L_OK = P_OK+L_OFFSET.
*&SPWIZARD: execute general and TC specific operations *
CASE L_OK.
WHEN 'INSR'. "insert row
PERFORM FCODE_INSERT_ROW USING P_TC_NAME
P_TABLE_NAME.
CLEAR P_OK.
WHEN 'DELE'. "delete row
PERFORM FCODE_DELETE_ROW USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
CLEAR P_OK.
WHEN 'P--' OR "top of list
'P-' OR "previous page
'P+' OR "next page
'P++'. "bottom of list
PERFORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
L_OK.
CLEAR P_OK.
WHEN 'L--'. "total left
PERFORM FCODE_TOTAL_LEFT USING P_TC_NAME.
WHEN 'L-'. "column left
PERFORM FCODE_COLUMN_LEFT USING P_TC_NAME.
WHEN 'R+'. "column right
PERFORM FCODE_COLUMN_RIGHT USING P_TC_NAME.
WHEN 'R++'. "total right
PERFORM FCODE_TOTAL_RIGHT USING P_TC_NAME.
WHEN 'MARK'. "mark all filled lines
PERFORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'DMRK'. "demark all filled lines
PERFORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'SASCEND' OR
'SDESCEND'. "sort column
PERFORM FCODE_SORT_TC USING P_TC_NAME
l_ok.
ENDCASE.
ENDFORM. " USER_OK_TC
*& Form FCODE_INSERT_ROW *
FORM fcode_insert_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_LINES_NAME LIKE FELD-NAME.
DATA L_SELLINE LIKE SY-STEPL.
DATA L_LASTLINE TYPE I.
DATA L_LINE TYPE I.
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_LINES_NAME.
ASSIGN (L_LINES_NAME) TO <LINES>.
*&SPWIZARD: get current line *
GET CURSOR LINE L_SELLINE.
IF SY-SUBRC <> 0. " append line to table
L_SELLINE = <TC>-LINES + 1.
*&SPWIZARD: set top line *
IF L_SELLINE > <LINES>.
<TC>-TOP_LINE = L_SELLINE - <LINES> + 1 .
ELSE.
<TC>-TOP_LINE = 1.
ENDIF.
ELSE. " insert line into table
L_SELLINE = <TC>-TOP_LINE + L_SELLINE - 1.
L_LASTLINE = <TC>-TOP_LINE + <LINES> - 1.
ENDIF.
*&SPWIZARD: set new cursor line *
L_LINE = L_SELLINE - <TC>-TOP_LINE + 1.
*&SPWIZARD: insert initial line *
INSERT INITIAL LINE INTO <TABLE> INDEX L_SELLINE.
<TC>-LINES = <TC>-LINES + 1.
*&SPWIZARD: set cursor *
SET CURSOR LINE L_LINE.
ENDFORM. " FCODE_INSERT_ROW
*& Form FCODE_DELETE_ROW *
FORM fcode_delete_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: delete marked lines *
DESCRIBE TABLE <TABLE> LINES <TC>-LINES.
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
IF <MARK_FIELD> = 'X'.
DELETE <TABLE> INDEX SYST-TABIX.
IF SY-SUBRC = 0.
<TC>-LINES = <TC>-LINES - 1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " FCODE_DELETE_ROW
*& Form COMPUTE_SCROLLING_IN_TC
text
-->P_TC_NAME name of tablecontrol
-->P_OK ok code
FORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
P_OK.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TC_NEW_TOP_LINE TYPE I.
DATA L_TC_NAME LIKE FELD-NAME.
DATA L_TC_LINES_NAME LIKE FELD-NAME.
DATA L_TC_FIELD_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_TC_LINES_NAME.
ASSIGN (L_TC_LINES_NAME) TO <LINES>.
*&SPWIZARD: is no line filled? *
IF <TC>-LINES = 0.
*&SPWIZARD: yes, ... *
L_TC_NEW_TOP_LINE = 1.
ELSE.
*&SPWIZARD: no, ... *
CALL FUNCTION 'SCROLLING_IN_TABLE'
EXPORTING
ENTRY_ACT = <TC>-TOP_LINE
ENTRY_FROM = 1
ENTRY_TO = <TC>-LINES
LAST_PAGE_FULL = 'X'
LOOPS = <LINES>
OK_CODE = P_OK
OVERLAPPING = 'X'
IMPORTING
ENTRY_NEW = L_TC_NEW_TOP_LINE
EXCEPTIONS
NO_ENTRY_OR_PAGE_ACT = 01
NO_ENTRY_TO = 02
NO_OK_CODE_OR_PAGE_GO = 03
OTHERS = 0.
ENDIF.
*&SPWIZARD: get actual tc and column *
GET CURSOR FIELD L_TC_FIELD_NAME
AREA L_TC_NAME.
IF SYST-SUBRC = 0.
IF L_TC_NAME = P_TC_NAME.
*&SPWIZARD: et actual column *
SET CURSOR FIELD L_TC_FIELD_NAME LINE 1.
ENDIF.
ENDIF.
*&SPWIZARD: set the new top line *
<TC>-TOP_LINE = L_TC_NEW_TOP_LINE.
ENDFORM. " COMPUTE_SCROLLING_IN_TC
*& Form FCODE_TC_MARK_LINES
marks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
&SPWIZARD: EGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: mark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = 'X'.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Form FCODE_TC_DEMARK_LINES
demarks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: demark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = SPACE.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Module D20XX_INIT OUTPUT
text
MODULE D20XX_INIT OUTPUT.
*if screen-name = 'ZSRNO'.
SCREEN-INPUT = 0.
SCREEN-COLOR = 0.
MODIFY SCREEN.
endif.
ENDMODULE. " D20XX_INIT OUTPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
*CLEAR R1_REF.
DO 30 TIMES.
APPEND G_TC1_ITAB.
ENDDO.
DESCRIBE TABLE G_TC1_ITAB LINES TC1-LINES.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module TAB1_INIT OUTPUT
text
MODULE TAB1_INIT OUTPUT.
ENDMODULE. " TAB1_INIT OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module MESSAGE INPUT
text
MODULE MESSAGE INPUT.
OK_CODE = SY-UCOMM.
S_CODE = OK_CODE.
CLEAR OK_CODE.
if S_CODE = 'DELE'.
loop at G_TC1_ITAB.
if G_TC1_ITAB-scrname = 'X'.
delete g_tc1_itab.
endif.
endloop.
ELSEIF S_CODE = 'SAVE'.
G_TC1_WA-ZSRNO = T1.
MOVE-CORRESPONDING G_TC1_WA TO ZFG_SRNO.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
ENDIF.
ENDMODULE. " MESSAGE INPUT
*& Module DELETE_RECORD INPUT
text
MODULE DELETE_RECORD INPUT.
IF MARK = 'X' AND S_CODE = 'DELE'.
DELETE TABLE G_TC1_ITAB FROM ZFG_SRNO.
DESCRIBE TABLE G_TC1_ITAB LINES TC1-LINES.
ENDIF.
ENDMODULE. " DELETE_RECORD INPUT
*********************Screen modules*********************
PROCESS BEFORE OUTPUT.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'TC1'
MODULE TC1_INIT.
*&SPWIZARD: MODULE TC1_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TC1_CHANGE_COL_ATTR.
LOOP AT G_TC1_ITAB
INTO G_TC1_WA
WITH CONTROL TC1
CURSOR TC1-CURRENT_LINE.
*&SPWIZARD: MODULE TC1_CHANGE_FIELD_ATTR
MODULE TC1_MOVE.
MODULE TAB1_INIT.
MODULE TC1_GET_LINES.
ENDLOOP.
MODULE D20XX_INIT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'TC1'
*BREAK POINT.
LOOP AT G_TC1_ITAB.
CHAIN.
FIELD ZFG_SRNO-ZSRNO.
MODULE TC1_MODIFY ON CHAIN-REQUEST.
MODULE TC1_MODIFY.
ENDCHAIN.
MODULE MESSAGE .
MODULE DELETE_RECORD.
ENDLOOP.
MODULE TC1_USER_COMMAND.
*&SPWIZARD: MODULE TC1_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TC1_CHANGE_COL_ATTR.
MODULE USER_COMMAND_0100.
please check out the link below for more information it might help you
http://help.sap.com/saphelp_sm32/helpdata/en/9f/dbac9f35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801c7b454211d189710000e8322d00/content.htm
http://www.sapbrainsonline.com/REFERENCES/ABAP_SYNTAX/SAP_ABAP_SYNTAX.html
*********please reward points if the information is helpful to you************* -
Table are not prefixed with Schema in SQL request - Unable to get Data
I began this new thread because I closed the [previous one|Unable to get data (DSN connection); a little bit early, I believed it was OK but no the problem still here.
First my architecture :
Oracle 9g
+500 Reports made under CR developper 8.5 or 9.0
Report opened in VB .net application, framework 2.0 using CR runtime 8.5 and 9.0
We want to upgrade CR version to 2008, so modification of reports will be done with CR 2008 Developper, and we want to
use only CR 2008 runtime.
The problem :
Everything works fine in CR Developer, but the same report with the same parameters failed when called inside .net.
The error is "Unable to get data", the database connection is OK but the queries mades from inside the report are wrong :
The tables/views in the from statement are not prefixed with the Schema, so Oracle don't find them.
Example (SQL monitoring done with TOAD)
Execution of postes.rpt report directly in CR :
Timestamp: 10:30:03.881
Successful logon attempt (session tag: 0x6464CB8)
username: 'APPLI_HUET'; database: 'DEV'
SELECT ...
FROM "COMMUN"."ETAB" "ETAB" INNER JOIN "GESTION_DES_TEMPS"."POSTES" "POSTES"
ON "ETAB"."N_ETAB"="POSTES"."N_ETAB"
WHERE "POSTES"."N_ETAB"=2 ORDER BY "POSTES"."N_POSTE"
Timestamp: 10:50:29.178
Logoff (session tag: 0x6464CB8).
Same report, same authentication but throught .net program :
Timestamp: 11:01:24.569
Successful logon attempt (session tag: 0xA93FC38)
username: 'APPLI_HUET'; database: 'DEV'
SELECT ...
FROM "ETAB" "ETAB" INNER JOIN "POSTES" "POSTES"
ON "ETAB"."N_ETAB"="POSTES"."N_ETAB" WHERE "POSTES"."N_ETAB"=2 ORDER
BY "POSTES"."N_POSTE"
Runtime error occurred: 942 (ORA-00942: Table ou vue inexistante)
The .net code :
Dim _report As New ReportDocument()
_report.Load("report.rpt", OpenReportMethod.OpenReportByDefault)
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
myConnectionInfo.ServerName = "DSN_file"
myConnectionInfo.UserID = p_Userid
myConnectionInfo.Password = p_Password
' to see code in this method se my original post
SetDBLogonForReport(myConnectionInfo, _report)
SetDBLogonForSubreports(myConnectionInfo, _report)
Dim frmViewer As New CrystalReportViewer
frmViewer.CrystalReportViewer1.ReportSource = _report
frmViewer.Show()
Any ideas ?Thanks for the and sorry but I don't understand.
I've made a research of Location on this forum the more intersting thread I've found is rpt-files do not function anymore after deploying to a different database, but I still don't understand.
I take a look at all code sample and I can't found anything.
You say that .Location need to be set, indeed Location property of CrystalDecisions.CrystalReports.Engine.Table object only contains table name.
I tried to overrides this value by the fully qualified table name (ie Schema.Table, for example GESTION_DES_TEMPS.POSTES), and it work BUT it wouldn't be the solution, my code is designed to be generic, I can't have a database to know wich schema add before differents table name.
Why when we execute the report directly in CR 2008 developper we don't have to redefine the table location ?
Another test :
I've made a new report directly in CR 2008 with a DSN, launch it in .net with the same DSN (server) : OK
Then I launch it in .net with another DSN, it work also.
Why report done with Crystal 8.5 or 9.0 have this problem ?
I'me gonna be mad....
Edited by: Yoann DAVID on Jan 8, 2010 3:32 PM -
Getting an "unable to Load the tables in the power pivot window" error
Hello,
I have 2 worksheets in a excel file and would like to load both into a power pivot table. When I click the 'create linked table' in the pwer pivot ribbon, The powerpivot window open and looks like its about to load the data but then I get
a popup dialogue box with the following error:
Unable to load the tables in the powerpivot window
============================
Error Message:
============================
The given key was not present in the dictionary.
============================
Call Stack:
============================
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.AnalysisServices.Modeler.SheetTabs.PopulateSheetList(String selKey)
at Microsoft.AnalysisServices.Modeler.SheetTabs.SetSelectedSheet(String key)
at Microsoft.AnalysisServices.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
When I try again, there is a meesage saying the table is already linked but I dont see any data.
has Anyone seen this error before and know what to do?
Thanks,
NathanHi
I get first the same error as above but after I look into the details I see the following error message:
in translation the error message is: There is already a item with the same key added.
I can open the power pivot window in diagram view. And after I refresh the data in one of the tables I can open it in the table view. I have already searched for "!" signs in the calculations and searched for calculations with same name but that
is not the problem.
Also I can't open the synonym window. I think this has something to do with it because I've made changes in the synonyms.
============================
Foutbericht:
============================
Er is al een item met dezelfde sleutel toegevoegd.
============================
Aanroepstack:
============================
bij System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
bij Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(Tuple`2 measure, SynonymCollection synonyms)
bij Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
bij Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
bij Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
bij Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
Thanks,
Leo -
ORA-30926: unable to get a stable set of rows in the source tables
hi,
I am loading data from source table to target table in a interface.
Using LKM incremental update .
In the merge rows step , getting the below error.
30926 : 99999 : java.sql.SQLException: ORA-30926: unable to get a stable set of rows in the source tables
please help as what should be done to resolve this.Below is the query in the merge step...
when i run from SQL also, same error
SQL Error: ORA-30926: unable to get a stable set of rows in the source tables
30926. 00000 - "unable to get a stable set of rows in the source tables"
*Cause: A stable set of rows could not be got because of large dml
activity or a non-deterministic where clause.
*Action: Remove any non-deterministic where clauses and reissue the dml.
merge into TFR.INVENTORIES T
using TFR.I$_INVENTORIES S
on (
T.ORGANIZATION_ID=S.ORGANIZATION_ID
and T.ITEM_ID=S.ITEM_ID
when matched
then update set
T.ITEM_TYPE = S.ITEM_TYPE,
T.SEGMENT1 = S.SEGMENT1,
T.DESCRIPTION = S.DESCRIPTION,
T.LIST_PRICE_PER_UNIT = S.LIST_PRICE_PER_UNIT,
T.CREATED_BY = S.CREATED_BY,
T.DEFAULT_SO_SOURCE_TYPE = S.DEFAULT_SO_SOURCE_TYPE,
T.MATERIAL_BILLABLE_FLAG = S.MATERIAL_BILLABLE_FLAG,
T.LAST_UPDATED_BY = S.LAST_UPDATED_BY
,T.ID = TFR.INVENTORIES_SEQ.NEXTVAL,
T.CREATION_DATE = CURRENT_DATE,
T.LAST_UPDATE_DATE = CURRENT_DATE
when not matched
then insert
T.ORGANIZATION_ID,
T.ITEM_ID,
T.ITEM_TYPE,
T.SEGMENT1,
T.DESCRIPTION,
T.LIST_PRICE_PER_UNIT,
T.CREATED_BY,
T.DEFAULT_SO_SOURCE_TYPE,
T.MATERIAL_BILLABLE_FLAG,
T.LAST_UPDATED_BY
,T.ID,
T.CREATION_DATE,
T.LAST_UPDATE_DATE
values
S.ORGANIZATION_ID,
S.ITEM_ID,
S.ITEM_TYPE,
S.SEGMENT1,
S.DESCRIPTION,
S.LIST_PRICE_PER_UNIT,
S.CREATED_BY,
S.DEFAULT_SO_SOURCE_TYPE,
S.MATERIAL_BILLABLE_FLAG,
S.LAST_UPDATED_BY
,TFR.INVENTORIES_SEQ.NEXTVAL,
CURRENT_DATE,
CURRENT_DATE
) -
MERGE error : unable to get a stable set of rows in the source tables
Hi,
For an update, the following MERGE statement throws the error-unable to get a stable set of rows in the source tables:
MERGE INTO table2t INT
USING (SELECT DISTINCT NULL bdl_inst_id,.......
FROM table1 ftp
WHERE ftp.gld_business_date = g_business_date
AND ftp.underlying_instrument_id IS NOT NULL) ui
ON ( ( INT.inst_id = ui.inst_id
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.ric = ui.ric
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.isin = ui.isin
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.sedol = ui.sedol
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.cusip = ui.cusip
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
WHEN MATCHED THEN
UPDATE
SET INT.inst_id = ui.inst_id, INT.ric = ui.ric
WHEN NOT MATCHED THEN
INSERT (inst_key, ......)
VALUES (inst_key, ......);
To determine the existence of a record, first check if any match is found on the first key, if not then search for the second key and so on.
Now two records with differenct first key, i.e. inst_id, can have the same ric(second key). On a rerun, with the target table already populated, the code fails. The reason is it finds duplicate entries for the second key.
Any suggestions on how to make this work?
Thanks in advance.
AnnieAnnie
You've spotted the problem (that two records have the same RIC). MERGE doesn't allow that; each record in the data being updated is only allowed to be updated once.
Is there a PK column (or columns) that we can rely on?
What you can try is to outer join FTP to INT. Something like:
MERGE INTO INT int1
USING (
select columns_you_need
from (
select ftp.columns -- whatever they are
, int2.columns
, row_number() over (partition by int2.pk_columns order by int2.somecolumns) as rn
from ftp
left join int int2
on (the condition you used in your query)
where rn=1
) s
WHEN MATCHED THEN UPDATE ...
WHEN NOT MATCHED THEN INSERT ...So if you can restrict the driving query so that only the first one of the possible updates actually gets presented to the MERGE operation, you might be in with a chance :-)
And of course this error is nothing to do with any triggers.
HTH
Regards Nigel -
ORA-30926: unable to get a stable set of rows in the source table
When user are trying to open a form getting below error.
com.retek.platform.exception.RetekUnknownSystemException:ORA-30926: unable to get a stable set of rows in the source tables
Please advice
Edited by: user13382934 on Jul 9, 2011 1:32 PMPlease try this
create table UPDTE_DEFERRED_MAILING_RECORDS nologging as
SELECT distinct a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
a.drank,
c.CONTACT_CD,
c.NEW_CUST_CD,
a.DM_ROW_ID
FROM (SELECT a.ROWID AS DM_ROW_ID,
a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
dense_rank() over(PARTITION BY a.CUST_ID, a.EMP_ID ORDER
BY a.PURCHASE_DATE DESC, a.ROWID) DRANK
FROM deferred_mailing a) a,
customer c
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
and a.drank=1;
The query you've posted is behaving according to the expectations. The inner select is returning one row and the outer is returning two as the
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
conditions are seeing two rows in the table customer.
I've added the a.drank=1 clause to skip the duplicates from the inner table and distinct in the final result to remove duplicates from the overall query result.
For eg, if you have one more row in the deferred_mailing like this
SQL> select * from DEFERRED_MAILING;
CUST_ID EMP_ID PURCHASE_
444 10 11-JAN-11
444 10 11-JAN-11
then the query without "a.drank=1" will return 4 rows like this by the outer query.
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
It'll return the below even if we use distinct on the same query(i.e. without a.drank=1)
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
which contains duplicates again.
So, we need a combination of distinct and dense here.
btw, Please mark the thread as 'answered', if you feel you got your question answered. This will save the time of others who search for open questions to answer.
Regards,
CSM -
Ora-30926 : unable to get a stable set of rows in source table
Dear All
When I try to load my cube I get the error "ora-30926 : unable to get a stable set of rows in source table".
Any idea? Googling for this error did not return any solutions.
My env:
source: Oracle 10g (10.2.x)
Target: Oracle 11g (11.1.0.7)
I am using warehouse builder 11.1.0.7 on Linux
thank youCarsten / neashton
Thanks for your help. Duplicate rows were the issue.
I finally debugged the problem to my time dimension.
The OWB wizard generated time dimension contains only date, but no time.
Unfortunately, for me to uniquely identify my data, I need to include time also (detailed in how do I include 'Time' in a time dimension? .
Since Carsten was the first one to answer this, I am awarding the points to him.
thanks a lot both of you
Edited by: T2 on Jun 2, 2009 4:01 AM -
Phone unable to get Host Routing Tables
Hey,
I've been on with Rogers tech support for sometime today.
My originating issue was wireless wouldn't work and everytime i tried to scan for networks the bb would freeze and auto restart. I did a backup and wiped the device and wireless was working yet again.
But now i'm unable to get data services at all, apparently with rogers you're supposed to get EDGE and not edge. You're also supposed to have 8 entries in the Host Routing Table and i have none.
Rogers has wiped the handheld, reloaded all applications to barebones and still the issue persists.
Whenever i try to do a full restore it errors out at reloading WLAN Profiles and options.
Before all this started and it was wiped trying to view WIFI Options an error popped up "Uncaught Exception: padded byte out of range" now i remembered that from memory so the Uncaught part maybe wrong.
Really don't want to drop another $500 on a phone literally 2 years after i spent $400 for this thing.
Thanks
IanI should also add that i tried my dads sim card in my phone and same issue.
Radio Data Activation: Yes
Signal Level: -86dBm
Radio Access: EDGE
Network: Rogers Wireless
IP Address: 10.172.171.13
ICMP Ping Echo: Yes
BlackBerry Registration: No
Connected to BlackBerry: No
BlackBerry PIN-PIN: No
Server Name: GBISXNAC01S08
Email Address: <email address #1>
Connected to <email address #1>: No
Server Name: GBISXNAC01S08
Email address: <email address #2>
Connected to <email address #2>: No
PIN: 24a5d7dd
MSISDN: <my phone number>
Device Type: BlackBerry 8900
Application Version: v4.6.1.94
Platform Version: 4.2.0.69
Thanks
Ian -
Hi Gurus
We have created a custom oracle report and concurrent program and when we ran the concurrent program it is error out with below error
Enter Password:
REP-0004: Warning: Unable to open user preference file.
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Can any one help us
Thanks in advance.
KumarPlease see
REP-0004 Warning - Unable to Open User Preference File. (Doc ID 26014.1)
ApPsMaStI
sharing is Caring -
MERGE Statement - unable to get a stable set of rows in the source tables
OWB Client: 10.1.0.2.0
OWB Repository: 10.1.0.1.0
I am trying to create a MERGE in OWB.
I get the following error:
ORA-12801: error signaled in parallel query server P004 ORA-30926: unable to get a stable set of rows in the source tables
I have read the other posts regarding this and can't seem to get a fix.
The target table has a unique index on the field that I am matching on.
The "incoming" data doesn't have a unique index, but I have checked and confirmed that it is unique on the appropriate key.
The "incoming" data is created by a join and filter in the mapping and I'd rather avoid having to load this data into a new table and add a unique index on this.
Any help would be great.
Thanks
LauraHello Laura,
The MERGE statement does not require any constraints on its target table or source table. The only requirement is that two input rows cannot update the same target row, meaning that all existing target rows can be matched by at most one input row (otherwise the MERGE would be undeterministic since you don't know which of the input rows you would end up with in the target).
If a table takes ages to load (and is not really big) I suspect that your mapping is not running in set mode and that it performs a full table scan on source data for each target row it produces.
If you ARE running in set mode you should run explain plan to get a hint on what is wrong.
Regarding your original mapping, try to set the target operator property:
Match by constraint=no constraints
and then check the Loading properties on each target column.
Regards, Hans Henrik -
Unable to get Material No and Description from VBAP
Hi Gurus
Can anyone please help me to get material number and description from vbap table, The report is fine but I am unable to get material no and description.
regards
report ZCHGDOC_BY_SALES no standard page heading
line-size 132.
type-pools:
slis. " ALV types
Tables
tables:
cdhdr, " Change documents: Header
cdpos, " Change documents: Items
vbak, " Sales order: Header
mara, " Material No
user_addr, " User Address
vbap. " Contract order: Items
Types
types:
begin of ty_cdhdr,
objectclas like cdhdr-objectclas, " Object class
objectid like cdhdr-objectid, " Object value
changenr like cdhdr-changenr, " Document change number
username like cdhdr-username, " Changed by
udate like cdhdr-udate, " Changed on
utime like cdhdr-utime, " Changed at
tcode like cdhdr-tcode, " Transaction code
end of ty_cdhdr,
ty_it_cdhdr type ty_cdhdr occurs 0,
begin of ty_cdpos,
objectclas like cdpos-objectclas, " Object class
objectid like cdpos-objectid, " Object value
changenr like cdpos-changenr, " Document change number
tabname like cdpos-tabname, " Table name
tabkey like cdpos-tabkey, " Table key
fname like cdpos-fname, " Field name
chngind like cdpos-chngind, " Change indicator
value_new like cdpos-value_new, " New value of field
value_old like cdpos-value_old, " Old value of field
end of ty_cdpos,
ty_it_cdpos type ty_cdpos occurs 0,
begin of ty_dd03l,
tabname like dd03l-tabname,
fieldname like dd03l-fieldname,
as4local like dd03l-as4local,
as4vers like dd03l-as4vers,
rollname like dd03l-rollname,
end of ty_dd03l,
ty_it_dd03l type ty_dd03l occurs 0,
begin of ty_dd04t,
rollname like dd04t-rollname,
ddlanguage like dd04t-ddlanguage,
as4local like dd04t-as4local,
as4vers like dd04t-as4vers,
scrtext_l like dd04t-scrtext_l,
end of ty_dd04t,
ty_it_dd04t type ty_dd04t occurs 0,
begin of ty_kna1,
kunnr like kna1-kunnr, " Customer number
name1 like kna1-name1, " Customer name
end of ty_kna1,
ty_it_kna1 type ty_kna1 occurs 0,
begin of ty_user_addr,
bname like user_addr-bname, " user no
name_textc like user_addr-name_textc , " Username
end of ty_user_addr,
ty_it_user_addr type ty_user_addr occurs 0,
begin of ty_vbap,
matnr like vbap-matnr, " Material No
arktx like vbap-arktx, " Production Description
end of ty_vbap,
ty_it_vbap type ty_vbap occurs 0,
ty_text(500) type c,
ty_lines type tline,
ty_it_lines type ty_lines occurs 0,
begin of ty_merged,
vbeln like vbak-vbeln, " Sales order number
erdat like vbak-erdat, " Created on
auart like vbak-auart, " Order type
faksk like vbak-faksk, " Billing block in SD document
netwr like vbak-netwr, " Net value
waerk like vbak-waerk, " Currency
vkorg like vbak-vkorg, " Sales organisation
vtweg like vbak-vtweg, " Distribution channel
vkbur like vbak-vkbur, " Sales office
fkara like vbak-fkara, " Proposed billing type
kunnr like vbak-kunnr, " Sold-to party
bname like vbak-bname , " User No
xblnr like vbak-xblnr, " Reference
fbuda like vbkd-fbuda, " Date services rendered
username like cdhdr-username, " Changed by
udate like cdhdr-udate, " Changed on
utime like cdhdr-utime, " Changed at
tcode like cdhdr-tcode, " Transaction code
tabname like cdpos-tabname, " Table name
tabkey like cdpos-tabkey, " Table key
fname like cdpos-fname, " Field name
chngind like cdpos-chngind, " Change indicator
value_new like cdpos-value_new, " New value of field
value_old like cdpos-value_old, " Old value of field
scrtext_l like dd04t-scrtext_l, " Description of field
intnote type ty_text, " Internal note
hdrnote type ty_text, " Header note
name1 like adrc-name1, " Sold-to party name
matnr like vbap-matnr, " Material No
arktx like vbap-arktx, " Product Description
end of ty_merged,
ty_it_merged type ty_merged occurs 0,
begin of ty_vbak,
vbeln like vbak-vbeln, " Sales order number
erdat like vbak-erdat, " Created on
auart like vbak-auart, " Order type
faksk like vbak-faksk, " Billing block in SD document
netwr like vbak-netwr, " Net value
waerk like vbak-waerk, " Currency
vkorg like vbak-vkorg, " Sales organisation
vtweg like vbak-vtweg, " Distribution channel
vkbur like vbak-vkbur, " Sales office
fkara like vbak-fkara, " Proposed billing type
kunnr like vbak-kunnr, " Sold-to party
xblnr like vbak-xblnr, " Reference
objectid like cdhdr-objectid, " Change document object
end of ty_vbak,
ty_it_vbak type ty_vbak occurs 0,
begin of ty_vbkd,
vbeln like vbkd-vbeln, " Sales order number
posnr like vbkd-posnr, " Sales order item
fbuda like vbkd-fbuda, " Date services rendered
end of ty_vbkd,
ty_it_vbkd type ty_vbkd occurs 0.
Internal tables
data:
it_cdhdr type ty_it_cdhdr,
it_cdpos type ty_it_cdpos,
it_fieldcat type slis_t_fieldcat_alv,
it_kna1 type ty_it_kna1,
it_user_addr type ty_it_user_addr,
it_merged type ty_it_merged,
it_vbak type ty_it_vbak,
Material No
it_vbap type ty_it_vbap,
it_vbkd type ty_it_vbkd.
data:
wa_vbak type ty_vbak.
data:
st_tvariant like disvariant,
st_variant like disvariant.
constants:
co_as4local_a like dd03l-as4local " Active version
value 'A',
co_objectclas_verkbeleg like cdhdr-objectclas
value 'VERKBELEG',
co_posnr_initial like vbkd-posnr " Initial item number
value is initial,
co_posnr_initial_2 like vbap-posnr " Initial item number
value is initial,
co_save_u type c " User display variant
value 'U', " saving allowed.
co_trvog_0 like vbak-trvog " Sales order
value '0'.
data:
va_exit type c, " ALV display
va_tabix like sy-tabix.
selection-screen: begin of block b1 with frame title text-001.
select-options:
s_vkorg for vbak-vkorg OBLIGATORY, " Sales organisation
s_vkbur for vbak-vkbur, " Sales office
s_vtweg for vbak-vtweg, " Distribution channel
s_vbeln for vbak-vbeln, " Sales order number
s_usrnme for cdhdr-username, " Changed by
s_udate for cdhdr-udate. " Changed on
selection-screen: end of block b1,
begin of block b2 with frame title text-002.
parameters:
p_varint like disvariant-variant. " Display variant.
selection-screen: end of block b2.
Initialization
initialization.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
at selection-screen on value-request for p_varint.
Provide display variant list for this program.
call function 'REUSE_ALV_VARIANT_F4'
exporting
is_variant = st_variant
i_save = co_save_u
importing
e_exit = va_exit
es_variant = st_tvariant
exceptions
not_found = 2.
if sy-subrc eq 2.
message id sy-msgid type 'S'
number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
if va_exit eq space.
st_variant = st_tvariant.
p_varint = st_tvariant-variant.
endif.
endif.
At selection screen
at selection-screen.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
Start of selection
Extract order details from VBAK
select vbeln erdat auart faksk netwr waerk vkorg vtweg vkbur fkara
kunnr xblnr
from vbak
into table it_vbak
where vkorg in s_vkorg
and vkbur in s_vkbur
and vbeln in s_vbeln.
if sy-subrc ne 0.
No data found for selection
message s001(zgen).
exit.
endif.
loop at it_vbak into wa_vbak.
va_tabix = sy-tabix.
wa_vbak-objectid = wa_vbak-vbeln.
modify it_vbak from wa_vbak
index va_tabix
transporting objectid.
endloop.
if sy-subrc ne 0.
No data found for selection
message s001(zgen).
exit.
endif.
loop at it_vbak into wa_vbak.
va_tabix = sy-tabix.
wa_vbak-objectid = wa_vbak-vbeln.
modify it_vbak from wa_vbak
index va_tabix
transporting objectid.
endloop.
Extract Change data
select objectclas objectid changenr username udate utime tcode
from cdhdr
into table it_cdhdr
for all entries in it_vbak
where objectclas eq co_objectclas_verkbeleg
and objectid eq it_vbak-objectid
and username in s_usrnme
and udate in s_udate.
if sy-subrc eq 0.
select objectclas objectid changenr tabname tabkey fname chngind
value_new value_old
from cdpos
into table it_cdpos
for all entries in it_cdhdr
where fname NE 'CMPRE_FLT'
and objectclas eq it_cdhdr-objectclas
and objectid eq it_cdhdr-objectid
and changenr eq it_cdhdr-changenr.
endif.
Extract customer details from KNA1
select kunnr name1
from kna1
into table it_kna1
for all entries in it_vbak
where kunnr eq it_vbak-kunnr.
---- Changes are made here -
Extract Material details from vbap
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial.
-----------------End of Change ----------------------*
Extract Contract No from vbkd.
select vbeln posnr fbuda
from vbkd
into table it_vbkd
for all entries in it_vbak
where vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial.
perform merge_data tables it_cdhdr
it_cdpos
it_kna1
it_user_addr
it_merged
it_vbak
it_vbap
it_vbkd.
if it_merged[] is initial.
message s001(zgen).
exit.
endif.
Release memory no longer required.
free: it_cdhdr,
it_cdpos,
it_kna1,
it_user_addr,
it_vbak,
it_vbap,
it_vbkd.
Build field catalog for call to report function
perform build_field_catalog tables it_fieldcat.
Output report.
perform output_report tables it_fieldcat
it_merged.
*& Form merge_data
text
form merge_data tables pa_it_cdhdr type ty_it_cdhdr
pa_it_cdpos type ty_it_cdpos
pa_it_kna1 type ty_it_kna1
pa_it_user_addr type ty_it_user_addr
pa_it_merged type ty_it_merged
pa_it_vbak type ty_it_vbak
pa_it_vbap type ty_it_vbap
pa_it_vbkd type ty_it_vbkd.
Local internal tables
data:
lit_dd03l type ty_it_dd03l,
lit_dd04t type ty_it_dd04t.
Local work areas
data:
lwa_cdhdr type ty_cdhdr,
lwa_cdpos type ty_cdpos,
lwa_dd03l type ty_dd03l,
lwa_dd04t type ty_dd04t,
lwa_kna1 type ty_kna1,
lwa_user_addr type ty_user_addr,
lwa_merged type ty_merged,
lwa_vbak type ty_vbak,
lwa_vbap type ty_vbap,
lwa_vbkd type ty_vbkd.
Local variables
data:
lva_dd03l_tabix like sy-tabix,
lva_dd04t_tabix like sy-tabix.
Sort Data
sort pa_it_cdhdr by objectid changenr.
sort pa_it_cdpos by objectid changenr tabname tabkey fname.
sort pa_it_kna1 by kunnr.
sort pa_it_user_addr by bname.
sort pa_it_vbak by vbeln.
sort pa_it_vbkd by vbeln.
loop at pa_it_vbak into lwa_vbak.
clear lwa_merged.
Assign sales order fields to reporting work area
lwa_merged-vbeln = lwa_vbak-vbeln.
lwa_merged-erdat = lwa_vbak-erdat.
lwa_merged-auart = lwa_vbak-auart.
lwa_merged-faksk = lwa_vbak-faksk.
lwa_merged-netwr = lwa_vbak-netwr.
lwa_merged-waerk = lwa_vbak-waerk.
lwa_merged-vkorg = lwa_vbak-vkorg.
lwa_merged-vtweg = lwa_vbak-vtweg.
lwa_merged-vkbur = lwa_vbak-vkbur.
lwa_merged-fkara = lwa_vbak-fkara.
lwa_merged-kunnr = lwa_vbak-kunnr.
lwa_merged-bname = 1wa_user_addr-bname.
lwa_merged-xblnr = lwa_vbak-xblnr.
Assgin Material to reporting work area
lwa_merged-matnr = lwa_vbap-vbeln.
Get name of sold-to party from PA_IT_KNA1
clear lwa_kna1.
read table pa_it_kna1 into lwa_kna1
with key kunnr = lwa_vbak-kunnr
binary search.
lwa_merged-name1 = lwa_kna1-name1.
Get name from PA_it_user_addr
clear lwa_user_addr.
read table pa_it_user_addr into lwa_user_addr
with key = lwa_user_addr-bname
binary search.
lwa_merged-username = lwa_user_addr-name_textc.
Get business data from PA_IT_VBKD.
clear lwa_vbkd.
read table pa_it_vbkd into lwa_vbkd
with key vbeln = lwa_vbak-vbeln
binary search.
lwa_merged-fbuda = lwa_vbkd-fbuda.
Get Material Data
clear lwa_vbap.
read table pa_it_vbap into lwa_vbap
with key matnr = lwa_vbap-matnr
with key vbeln = lwa_vbak-vbeln
binary search.
lwa_merged-arktx = lwa_vbap-arktx.
Get internal note text for sales order
perform read_text using '0002'
'1'
lwa_merged-vbeln
'VBBK'
lwa_merged-intnote.
Get header note 1 text for sales order
perform read_text using 'Z002'
'1'
lwa_merged-vbeln
'VBBK'
lwa_merged-hdrnote.
Determine if change documents exist for sales order.
clear lwa_cdhdr.
read table pa_it_cdhdr into lwa_cdhdr
with key objectid = lwa_vbak-objectid.
if sy-subrc ne 0.
continue.
endif.
loop at pa_it_cdhdr into lwa_cdhdr
from sy-tabix.
lwa_merged-username = lwa_cdhdr-username.
lwa_merged-udate = lwa_cdhdr-udate.
lwa_merged-utime = lwa_cdhdr-utime.
lwa_merged-tcode = lwa_cdhdr-tcode.
clear lwa_cdpos.
read table pa_it_cdpos into lwa_cdpos
with key objectid = lwa_cdhdr-objectid
changenr = lwa_cdhdr-changenr
binary search.
loop at pa_it_cdpos into lwa_cdpos
from sy-tabix.
lwa_merged-tabname = lwa_cdpos-tabname.
lwa_merged-tabkey = lwa_cdpos-tabkey.
lwa_merged-fname = lwa_cdpos-fname.
lwa_merged-chngind = lwa_cdpos-chngind.
lwa_merged-value_new = lwa_cdpos-value_new.
lwa_merged-value_old = lwa_cdpos-value_old.
Get description for field - determine date element
clear lwa_dd03l.
read table lit_dd03l into lwa_dd03l
with key tabname = lwa_cdpos-tabname
fieldname = lwa_cdpos-fname
binary search.
lva_dd03l_tabix = sy-tabix.
if sy-subrc ne 0.
select single tabname fieldname as4local as4vers rollname
from dd03l
into lwa_dd03l
where tabname eq lwa_cdpos-tabname
and fieldname eq lwa_cdpos-fname
and as4local eq co_as4local_a.
if sy-subrc eq 0.
insert lwa_dd03l into lit_dd03l
index lva_dd03l_tabix.
endif.
endif.
If data element was found, get description
if not lwa_dd03l is initial.
clear lwa_dd04t.
read table lit_dd04t into lwa_dd04t
with key rollname = lwa_dd03l-rollname
ddlanguage = sy-langu
binary search.
lva_dd04t_tabix = sy-tabix.
if sy-subrc ne 0.
select single rollname ddlanguage as4local as4vers scrtext_l
from dd04t
into lwa_dd04t
where rollname eq lwa_dd03l-rollname
and ddlanguage eq sy-langu.
if sy-subrc eq 0.
insert lwa_dd04t into lit_dd04t
index lva_dd04t_tabix.
else.
lwa_dd04t-scrtext_l = 'Description for field not found'.
endif.
endif.
endif.
lwa_merged-scrtext_l = lwa_dd04t-scrtext_l.
append lwa_merged to pa_it_merged.
at end of changenr.
Only process field changes for this change document.
exit.
endat.
endloop.
at end of objectid.
Initialise work area so we know change document for order has
been processed.
clear lwa_merged.
Only process change documents for this sales order.
exit.
endat.
endloop.
endloop.
endform. " merge_data
*& Form build_field_catalog
text
form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
data:
Local variable
lva_col_pos type slis_fieldcat_alv-col_pos,
Local structure
st_fieldcat type slis_fieldcat_alv.
lva_col_pos = 0.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VBELN'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VBELN'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VKBUR'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VKBUR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VKORG'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VKORG'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'KUNNR'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'KUNNR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
st_fieldcat-outputlen = '6'.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'NAME1'.
st_fieldcat-ref_tabname = 'KNA1'.
st_fieldcat-ref_fieldname = 'NAME1'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '15'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'MATNR'.
st_fieldcat-ref_tabname = 'VBAP'.
st_fieldcat-ref_fieldname = 'MATNR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
st_fieldcat-outputlen = '6'.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'SCRTEXT_L'.
st_fieldcat-ref_tabname = 'DD04T'.
st_fieldcat-ref_fieldname = 'SCRTEXT_L'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'UDATE'.
st_fieldcat-ref_tabname = 'CDHDR'.
st_fieldcat-ref_fieldname = 'UDATE'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '10'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'USERNAME'.
st_fieldcat-ref_tabname = 'CDHDR'.
st_fieldcat-ref_fieldname = 'USERNAME'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'FNAME'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'FNAME'.
st_fieldcat-row_pos = '4'.
st_fieldcat-outputlen = '8'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'CHNGIND'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'CHNGIND'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '8'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'WAERK'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'WAERK'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '5'.
st_fieldcat-col_pos = lva_col_pos..
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VALUE_NEW'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'VALUE_NEW'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VALUE_OLD'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'VALUE_OLD'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
endform. " build_field_catalog
*& Form output_report
text
form output_report tables pa_it_fieldcat type slis_t_fieldcat_alv
pa_it_merged type ty_it_merged.
Local variables
data:
lva_formname type slis_formname,
lva_repid like sy-repid.
lva_repid = sy-repid.
lva_formname = 'ALV_USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = lva_repid
i_callback_user_command = lva_formname
i_save = 'A'
is_variant = st_variant
it_fieldcat = pa_it_fieldcat[]
tables
t_outtab = pa_it_merged
exceptions
program_error = 1
others = 2.
endform. " output_report
*& Form alv_user_command
text
form alv_user_command using pa_ucomm like sy-ucomm
pa_selfield type slis_selfield.
Local work areas
data:
lwa_merged type ty_merged.
clear lwa_merged.
read table it_merged into lwa_merged
index pa_selfield-tabindex.
case pa_selfield-fieldname.
when 'VBELN'.
Contract Number
set parameter id 'AUN' field lwa_merged-vbeln.
call transaction 'VA03' and skip first screen.
S_BCE_68001393
when 'USERNAME'.
Username
set parameter id 'username' field lwa_merged-username.
call transaction 'S_BCE_68001393' and skip first screen.
when 'KUNNR'.
Customer number
set parameter id 'KUN' field lwa_merged-kunnr.
set parameter id 'VKO' field space.
set parameter id 'VTW' field space.
set parameter id 'SPA' field space.
call transaction 'XD03' and skip first screen.
endcase.
endform. " alv_user_command
*& Form read_text
text
form read_text using pa_id
pa_inline_count
pa_name
pa_object
pa_text.
Local internal tables
data:
lit_inlines type ty_it_lines,
lit_lines type ty_it_lines.
Local work areas
data:
lwa_lines type ty_lines.
Local variables
data:
lva_tdname like thead-tdname.
refresh: lit_inlines,
lit_lines.
lva_tdname = pa_name.
call function 'READ_TEXT_INLINE'
exporting
id = pa_id
inline_count = pa_inline_count
language = sy-langu
name = lva_tdname
object = pa_object
tables
inlines = lit_inlines
lines = lit_lines
exceptions
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
others = 7.
loop at lit_lines into lwa_lines.
concatenate pa_text
lwa_lines-tdline
into pa_text separated by space.
endloop.
endform. " read_text ENDLOOP.Hi
As per your code here:
"-------------- Changes are made here ----------------
*Extract Material details from vbap
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial. " Here the condition specifies you want to select sales order items where there is no item number, which i beleive shouldnt be the case
" -----------------End of Change ----------------------
Try as below by commenting the Item Number is INITIAL condition:
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln.
"and posnr eq co_posnr_initial.
Regards
Eswar
Maybe you are looking for
-
Looking for a specific applications for iphone
I heard there's an application that you can use as a remote control for your home audio. It's supposed to let you select music from your itunes to play on home speakers. Does anyone know what it's called.
-
Best method for incremental offsite backups?
I currently have multiple Macs and a Windows PC running XP. I also have a 1TB Time Capsule, so all the Macs are backed up via Time Machine. However, I want to have offsite backups as well, so I purchased 2 matching Seagate GoFlex 3TB drives. My pl
-
HT5882 How to take screen shot on iphone 5s?
How to take screen shot on iphone 5s?
-
Photoshop XMP geotagging corruption
How do I keep Mac Photoshop CS3 from corrupting the geotagging data in the images it processes? My workflow consists of using Nikon Capture NX2 to generate TIFFs or JPEGs and then I do touch-ups on them in Photoshop. However, Photoshop gets the tim
-
Error Accessing internet from the flex application.
Hi I am getting the following error while runningm my flex application deployed on the OC4J server. The error did not come when I was running the application directly from the flex builder. However , after deploying it on the application server my fl