Dbx: Unable to run with memory checking enabled

When I try to debug any program using memory checking, I get the following error:
RTC: Enabling Error Checking...
t@1 (l@1) signal SEGV (no mapping at the fault address ) in __rtc_mutex_unlock at 0xfffffd7ff3534949
0xfffffd7ff3534949: __rtc_mutex_unlock+0x0159: call *%r8d
dbx: Stopped within call to '__rtc_suppress_always'. Starting new command interpreter
Versions:
Solaris: SunOS 5.10 Generic_118844-20 ( amd64 )
CC: Sun C++ 5.8 Patch 121018-02 2006/04/08
dbx: 7.5 Patch 12166-02 2006/05/30

This segv problem (bug 6431531) has been fixed in SunStudio Express 2. SSX2 can be downloaded from:
http://developers.sun.com/prodtech/cc/downloads/express.jsp

Similar Messages

Unable to run authentication credential check function.

Hi everybody,
I have a employee table. In order to make authentication custom I use that table. The following is the function for it.
CREATE OR REPLACE PACKAGE BODY PKG_CONTROLS
AS
FUNCTION CheckPassword (vUsername VARCHAR2,vPassword VARCHAR2)
RETURN BOOLEAN
IS
     v_pw_check varchar2(1);
BEGIN
    SELECT 'x'
    INTO v_pw_check
    FROM EMPLOYEE
    WHERE EMP_NAME = vUsername
    AND PASSWORD = vPassword;
    APEX_UTIL.SET_AUTHENTICATION_RESULT(0);
    RETURN true;
EXCEPTION WHEN no_data_found THEN
    APEX_UTIL.SET_AUTHENTICATION_RESULT(4);
    RETURN false;
END CheckPassword;
END PKG_CONTROLS;I also form an authentication schema and call the above function. But when I try to login the system with the data that I saved before, it gives the following error;
ORA-06550: line 2, column 8: PLS-00306: wrong number or types of arguments in call to 'CHECKPASSWORD' ORA-06550: line 2, column 1: PL/SQL: Statement ignored
Error     ERR-10460 Unable to run authentication credential check functionPlease help me why am I taking this error?
Thanks

Use
RETURN PKG_CONTROLS.CheckPasswordfor yor authentication function and it will work. I think the default is two parameters and apex is parsing those two always. This is why explicit handling over of parameters will not work.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Unable to run 800Mhz memory on 975X Platinum PowerUp

hi,
I can't get my MSI board to recognize my 800mhz memory, it runs at 667mhz although it's 2x1GB Corsair XMS2-6400 4-4-4-12 2.1v. If I run CPU-Z, the SPD shows everything correctly, but I had to change the timing values manually, it defaults to 5-5-5-15 if I select "by SPD" in the BIOS. I'm running version 7.2 of the BIOS.
I'm pretty much a newbie when it comes to overclocking and tweaking BIOS settings, I just want it run at the correct speed and preferably not overclock at all.
Thanks in advance,
~ kiri

This is what they are saying for the version II
975X Platinum V.2
http://www.msicomputer.com/product/p_spec.asp?model=975X_Platinum_V.2&class=mb
Main Memory
• Supports 4 unbuffered DIMM of 1.8 Volt DDR2 SDRAM
• Supports up to 8GB memory size
• Support Dual Channel DDR2 533/677/800MHz and up
Due to the High Performance Memory design, motherboards or system configurations may or may not operate smoothly at the JEDEC (Joint Electron Device Engineering Council) standard settings (BIOS Default on the motherboard) such as DDR2 voltage, memory speeds and memory timing. Please confirm and adjust your memory setting in the BIOS accordingly for better system stability.
Example: Kingston HyperX DDR2-800 PC6400 operates at 2.0V, 4-4-4-12.
For more information about specification of high performance memory modules, please check with your Memory Manufactures for more details.
Gaucho

BC4J Tester won't run with SunJCE provider enabled in JDev 903

I have a working BC4J project that I can access via the Tester and via code in JDev 903. The Module is deployed in 'Local' mode.
I go into <jdev_home>\jdk\jre\lib\security\java.security and add the following line:
security.provider.3=com.sun.crypto.provider.SunJCE
I can no longer run the BC4J Tester - I get "java.lang.NullPointerException" - that's it - in the log window when I try to run the tester. I can still access the BC4J Module via code, just as before enabling the SunJCE provider, its just the Tester that won't run. My code that uses the SunJCE provider runs fine.
I then comment out the new line in java.security, and the Tester runs fine again. (But, of course, my code that needs the SunJCE provider does not...)
Note that I added this provider as the lowest order provider - the following is how java.security is setup when JDev is installed:
security.provider.1=sun.security.provider.Sun
security.provider.2=com.sun.rsajca.Provider
Any thoughts or ideas?
Thanks,
Jim Stoll
(I need this provider for something else I'm doing which uses both the SunJCE provider and BC4J, independent of each other)

Hi,
Can you create a JClient project to test your application module? I have not found why it failed in Tester when using SunJCE privider, but found that if I create a simple JClient using the same application module, it work.
Thanks,
Yvonne

I connect my i-pad mini to my wireless router but when i try to use the internet i get a pop up saying "unable to connect with server. check your internet connection and try again i try and try it still wont work anybody know how to fix this

I connect my i-pad mini to my wireless router and it says im connected but it wont let me do anything anybody know why ?

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Error ERR-10480 Unable to run authentication credential check function.

Application Express 2.2.1.00.04
Authentication Scheme
Based on a pre-configured scheme from the gallery
Show Login Page and Use Database Account Credentials
ORA-01935: missing user or role name ORA-06512: at "FLOWS_020200.WWV_FLOW_SECURITY", line 221 ORA-06512: at "SYS.WWV_FLOW_VAL", line 49 ORA-06521: PL/SQL: Error mapping function

database 10.2.0.2
I think there are two problems:
login was a number
- it must be filled surrounded by apostrophes ''
eg: login: '123456789'
user profile (in oracle database) has restriction that password cannot by changed
APEX password verification uses ALTER USER
administrator said that there is a patch for db but not for AMD64
is it true?
-- david

C6 unable to synchronise with server

c6, latest software installed, push email working fine but Ovi Sync is unable to synchronise contacts, calender & notes entries, getting error "unable to synchonise with server" checked internet connection, its working fine.

That looks like some server problem from nokia. I also checked it now and got the same error message. Try after some time. It was OK two hours ago when i checked my contacts.
Apu V.

Apache Trinidad is running with time-stamp checking enabled.

Experts,
Contents of my web.xml file
<context-param>
    <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
    <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
    <param-value>false</param-value>
</context-param>When my application runs i get the following on the weblogic console
<ViewHandlerImpl> <_checkTimestamp> Apache Trinidad is running with time-stamp checking enabled. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
<UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
Isnt it a bit strange ? Please advise what is wrong.
thnks
jdev 11.1.2.1

If you're talking about the integrated WLS, time-stamp checking is automatically enabled no matter what so that changes you make in the IDE can be picked up. It's nothing to worry about.
John

Unable to run Memory profiling, help please

Hi there,
I installed the lastest version of JDeveloper 10 and created a very simple project(only have one class with Main()method) for testing purpose.
I configure the Profiler in Project Properties page, setting the class as included instance, however, all those profiling menu items(e.g.: Memory Profile...) are greyed out and I am unable to run memory profiling.
I wonder if the functions are available for the free-downloaed version of JDeveloper, or is there something wrong with my setting?
Your help is highly appreciated.

Make sure you are positioned on the class in the application navigator before going to the "run" menu option.
Also does it work if you don't change anything in the project properties?
Here is what I did - created a new project with a simple hello class. And I didn't had any problems profiling it.
There is no function limitation on the version you downloaded.
Here is the class I tried:
public class Class1
public Class1()
public static void main(String[] args)
Class1 class1 = new Class1();
System.out.println("hello");
}

Every time I enable the OnBoard USB, in bios, the memory check takes ages.

yup. Every time I change the OnBoard USB to enabled in BIOS, the startup memory check takes for ages (approximately 5 minutes or so...)(the check jamms for a few numbers before it's finished, it jamms on numbers 104857 and after a little while it goes to the end 1048576 and continues the startup process) and this is really starting to annoy me 'cause I have to use a non-optical mouse and non-wireless keyboard because of that stupid bug or what-so-ever. Is the only choice BIOS update?
Edit1: the motherboard is MSI KT400, so it's VIA based.

Please run Memtest86 after disabling usb.
And btw a complete list of your hardware including the specs (amps!) of your psu would be helpfull.
Edit: You've already opend another thread about same topic so I close this one.
No double threads please.

I have a mac computer 3.2 Ghz intel core i3 with memory 4GB 1333 MHz DDR3, I have recently purchased an new macbook and have yosemite software and iCloud . I can no longer us my mac to open up recent numbers documents from my macbook. I am unabl

I have a mac computer 3.2 Ghz intel core i3 with memory 4GB 1333 MHz DDR3, I have recently purchased an new macbook and have yosemite software and iCloud . I can no longer us my mac to open up recent numbers documents from my macbook. I am unable to upgrade to allow me to get the current numbers version on my mac. What do I need to do to get all my machines woking in harmony again

On each machine turn on iCloud and sync all the available apps. Apple explains how to set up iCloud in http://www.apple.com/icloud/setup/
After doing this run software update on each machine and install all the suggested updates. If you still need help installing the most up-to-date versions of iLife and iWorks open the Mac App Store - click the Purchased tab and update all that need to be updated.

HP Photosmart 5510- Unable to Communicate with Printer Utility Check not working!!!!! HELP

I work with Windows 7 the error message I am getting is Unable to Communicate with Printer. I have never had a problem with a printer. First night worked amazing, All software is downloaded on the computer but then went to go print to day it didnt work. REBOOTED EVERYTHING, wireless router, computer and printer. Then ReConnected the printer to the router through what the Manuel says. FINALLY starts printing, waited about 30-45mins went to go print again and of course it didnt work.
I have attempted to do the Utility Check- States I am connected online both computer and printer to the router. From what I gather there is an issue with the printer- computer connection. I bought this specific Printer because it was wireless and highly recommended because HP brand, now I am wondering if this was a big mistake.
This question was solved.
View Solution.

Hi again;
Wish you are doing well despite this issue
Ok here is a page in the Cisco website with documentation in regards your Router check in here how to verify what is the current version of router's firmware. if needed you can find the latest version of here as well.
In how to get to the routers EWS to do this follow this steps;
To reveal Relevant TCP/IP settings include in windows this settings
•IP address
•subnet (subnet-mask)
•gateway address (also the router's or AP's IP address, which is useful for opening the router's web page
or Embedded Web Server (EWS) page.
Important communication test! Once you have obtained the gateway address, type this address into your Web browsers URL field to open your router's EWS, e.g., 192.168.0.1*. * This value will vary by router manufacturer.
Checking TCP/IP settings in most Microsoft operating systems
Step Action
1 Click on Start (Window button on your keyboard).
2 Type CMD (do not hit enter select from the menu with right click and select from the sub menu select run as
     Administrator).
  3 At the prompt, type ipconfig or "ipconfig" or "ipconfig /all" with out the quotes.
  4 Press ENTER on the keyboard, and note the values of the settings mentioned above.
Hope it helps and best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

I unable to run ejb with application client using oc4j j2ee container

Hi,
I have installe oracle9i (1.0.2.2) oc4j j2ee container.
I unable to run the ejbs . please help me how to run ejbs with application client and which files are shall configure.
See the client application is :
public static void main (String []args)
try {
//Hashtable env = new Hashtable();
//env.put("java.naming.provider.url", "ormi://localhost/Demo");
//env.put("java.naming.factory.initial", "com.evermind.server.ApplicationClientInitialContextFactory");
//env.put(Context.SECURITY_PRINCIPAL, "guest");
//env.put(Context.SECURITY_CREDENTIALS, "welcome");
//Context ic = new InitialContext (env);
System.out.println("\nBegin statelesssession DemoClient.\n");
Context context = new InitialContext();
Object homeObject = context.lookup("java:comp/env/DemoApplication");
DemoHome home= (DemoHome)PortableRemoteObject.narrow(homeObject, DemoHome.class);
System.out.println("Creating Demo\n");
Demo demo = home.create();
System.out.println("The result of demoSelect() is.. " +demo.sayHello());
}catch ( Exception e )
System.out.println("::::::Error:::::: ");
e.printStackTrace();
System.out.println("End DemoClient....\n");
When I am running client application I got this type of Exception
java.lang.SecurityException : No such domain/application: sampledemo
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java : 2040)
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java : 1884)
at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java : 1491)
at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java : 323)
at com.evermind.server.rmi.RMIContext.lookup(RMIConext.java : 106)
at com.evermind.server.administration.LazyResourceFinder.lookup(LazyResourceFinder.java : 59)
at com.evermind.server.administration.LazyResourceFinder.getEJBHome(LazyResourceFinder.java : 26)
at com.evermind.server.Application.createContext(Application.java: 653)
at com.evermind.server.ApplicationClientInitialContext.getInitialContext(ApplicationClientInitialContextFactory.java :179 )
at javax.naming.spi.NamingManager.getInitialContext(NamingManger.java : 246)
at javax.naming.InitialContext.getDefaultInitialCtx(InitialContext.java : 246)
at javax.naming.InitialContext.init(InitialContext.java : 222)
at javax.naming.InitialContext.<init>(InitialContext.java : 178)
at DemoClient.main(DemoClient.java : 23)
.ear file is copied into applications directory.
I have configured server.xml file like this
<application name="sampledemo" path="../applications/demos.ear" />
demos.ear file Contains following files
application.xml
demobean.jar
Manifest.mf
demobean.jar file contains following files
application-client.xml
Demo.class
DemoBean.class
DemoHome.class
ejb-jar.xml
jndi.properties
Mainifest.mf
Please give me your valuable suggestions. Which are shall i configure .
Thanks & Regards,
Badri

Hi Badri,
ApplicationClientInitialContextFactory is for clients which got deployed inside OC4J container..
For looking up EJB from a stand alone java client please use RMIInitialContextFactory..So please change ur code....
Also please check ur server.xml
Since you have specified your ejb domain as "sampledemo"
you have to use that domian only for look up..But it seems that you are looking up for "Demo" domain instead of "sampledemo" domain...So change your code to reflect that..
Code snippet for the same is :
Hashtable env = new Hashtable();
env.put("java.naming.provider.url", "ormi://localhost/sampledemo");
env.put("java.naming.factory.initial", "om.evermind.server.rmi.RMIInitialContextFactory");
env.put(Context.SECURITY_PRINCIPAL, "guest");
env.put(Context.SECURITY_CREDENTIALS, "welcome");
Context ic = new InitialContext (env);
Hope this helps
--Venky

Studio 10 dbx dumps core with access checking on

I have an application that causes Studio 10 dbx to dump core on start with access checking turned on. It will run OK under Studio 9 dbx, but tends to kill dbx if I attempt to follow the stack when a violation is found.
For some odd reason, 'suppress rui' does not work with it as well.
What information can I provide to help identify this bug? I expect the application and its build environment are too big to send in.
Cheers,
Ian

x86/AMD64 doesn't do access checking, or does it now?
Anyway, here is the pstack:
Cheers, Ian.
core '/tmp/core' of 12721: /opt/studio10/SUNWspro/bin/../prod/bin/sparcv9/dbx sm70/icp/test/sparc
ffffffff7e6a39c0 _kill (ffffffff7e7b0f88, 31b1, 2002, 100532d9d, 100532000, 100532) + 8
00000001000bbaa4 ???????? (10062e, 100400, b, 100400, 100633000, 10053f5e0)
ffffffff7e6a2dfc sigacthandler (b, ffffffff7fff8850, ffffffff7fff8570, b, 3d, 3d000000) + 2c
--- called from signal handler with signal 11 (SIGSEGV) ---
000000010025881c __1cHTypetabHGetType6Mii_pnEType__ (ffffffff7fffe738, 100999670, 100999680, 0, 0, ffffffff7
fffb892) + c
000000010029a01c __1cFStabsQmake_tactarglist6MpcrnHSymlist_pnHObjfile_ibb_2_ (ffffffff7fffe738, 7c, 1, 10099
9670, 0, 0) + 104
000000010029ae90 __1cFStabsZcafe_parse_templ_fun_inst6MpnHObjfile_pnDFun_pc5b_4_ (ffffffff7fffe738, 10099967
0, 1009ba7d0, 1, ffffffff7d340fc2, ffffffff7fffb884) + 24c
0000000100286c60 __1cFStabsIFuncDecl6MpnHObjfile_pnDFun_pcb_4_ (ffffffff7fffe738, 100999670, 1009ba990, 5f,
4c, 1009ba990) + ec
0000000100282828 __1cFStabsSNPatchProcessDebug6MpnHObjfile_pnEstab_pcIIbb_I_ (ffffffff7fffe738, 100999670, f
fffffff7d349e14, ffffffff7d31df38, ffffffff7d34f364, ffffffff7fffe66c) + 1d8
000000010024b478 ???????? (10076b050, 49e14, 0, de6, 0, 1)
000000010024b8d8 ???????? (100999670, ffffffffffffffff, 103955440, 102eb6730, 1, 1)
000000010024b6a8 __1cNReadLazyStabs6FpnHObjfile_bb_v_ (100999670, 10053f000, 1, 1, 10053f5e0, 100400) + e4
00000001001dbae8 __1cGRtcFunTlocate_npatch_sites6M_v_ (103933330, 7, e, 80, 84, 103933330) + 80
00000001001db888 __1cGRtcFunSlocate_patch_sites6ML_i_ (103933330, 51eb8400, ed11ad88, 100999a60, 81c7e008, 1
) + 784
00000001001d6544 __1cKRtcLoadObjRrtc_process_check6Mb_v_ (103933330, 100400, 100983860, 1009c4e70, 100983870
, ffffffffffffffff) + 6fc
00000001001c714c __1cGRtcMgrPrtc_new_process6M_v_ (102c1ae30, 10065a400, 0, 0, 1, 10056fe74) + 80c
00000001001c590c __1cGRtcMgrTtry_rtc_new_process6M_b_ (10065a400, 1005d4d05, 0, 10056f000, 10056f, 10076ac30
) + c
00000001001c5544 ???????? (1, 1029df5a9, 10053f5e0, 10065a400, 5, 1002452c8)
00000001000c7984 __1cSActionList_execute6FpnEList4nGAction___pnEProc_pnHHandler_pnJEventInst_nHLevel_e__v_ (
102d13780, 102cb0340, 102d1e1c0, 102ab71d0, 1, 10053b) + 64
0000000100166a4c __1cHHandlerSdecision_procedure6MpnEProc__v_ (102d1e1c0, 102cb0340, 100558, 100400, 1005585
bc, 102ab71d0) + 158
00000001001bfccc __1cKRecognizerHtrigger6MpnEProc__v_ (102d1e1c0, 102cb0340, 100400, 100581000, 100581ea8, 1
0056c18d) + e8
00000001001c0240 __1cKRecognizerIdispatch6FpnGTarget_pnEProc__v_ (10053f5e0, 102cb0340, 100400, 1, 0, 10064e
370) + 58
00000001001b0c44 __1cEProcNvcpu_dispatch6MpnEVCpu__b_ (102cb0340, 100766070, 1005468d0, 1002182a0, 100769888
, 100645d30) + 384
00000001001b0de8 __1cEProcQpervcpu_dispatch6MpnEVCpu__v_ (102cb0340, 10057c3d0, 102d3bc60, 10057c450, 10057c
3d0, 100569599) + 14c
00000001001b15d4 __1cEProcQgeneric_dispatch6MpnEVCpu__b_ (102cb0340, 10057c458, 100569, 100581000, 10056972b
, 100581) + 1a8
00000001001b1d4c __1cEProcCgo6MpnEVCpu_nGProcGo_b_v_ (102cb0340, 100569, 102be9050, cc4, 100581fe8, 1) + 52c
000000010017ca14 __1cGdo_run6FpnGInterp_bnHLevel_e__i_ (100400, 100568000, 100400, 10053f5e0, 100400, 100400
) + 328
00000001002bbba0 ???????? (1005983f7, 102ab8230, 10065b8d8, 0, 10066f510, 102b487e0)
00000001002ba890 __1cNpdksh_execute6FpnGInterp_pnCop_i_i_ (10065b890, 102c81dc0, 0, 10065b890, 102bcf5a0, 10
3539140) + 1c0
00000001002a710c __1cLpdksh_shell6FpnGInterp_pnGSource__i_ (10065b890, 102cf6280, 100400, 100596d79, 100596d
80, 1000bb4b0) + 4c0
00000001000bfa5c __1cNmain_cmd_loop6FpnGInterp__v_ (10065b890, 100400, 100533d18, 100614178, 100581f10, 1005
33) + a8
00000001000c0a8c main (100400, 100532, 100533d18, 10065b890, 10053f5e0, 1) + b8c
00000001000b409c _start (0, 0, 0, 0, 0, 0) + 17c

Msi Big Bang Xpower II can only run with 3 memory modules?

Hello there! I've just got my new system up and running. But it cant boot with 4 memory modules when there is a module in slot 7? I have a 4x8gb kit from corsair (CMP32GX3M4X1600C10), and a Msi Big Bang Xpower II..
When i start it, it just shows me the debug code "67" which is "Late Cpu Initialization" according to the "User Guide".. It stays there, for about 15 seconds, then it shuts down, and does the same, over and over..
Atm, i'm running with 3 modules, and there's no problems at all! I've testet ALL memory blocks, in another computer, and they run just fine..
What should i do?

Quote from: xmad on 25-September-12, 21:09:52
Also, what cpu, bios version , memory type etc
Make sure the mem mods are in the proper slots for tri channel operation.
>>Posting Guide<<
If everything comes up clean, update to the most recent bios. Only do this if your computer is stable in bios. IE You are only having crashes in windows etc.
>>Use the MSI HQ Forum USB flasher<<
http://www.msi.com/product/mb/Big-Bang-XPower-II.html#/?div=BIOS
**Merged
Core i7 3930K, V1.2 Bios, 32GB Corsair Dominator Quad channel 1600Mhz Kit.. The memory are installed as the manual says..

Dbx: Unable to run with memory checking enabled

Similar Messages

Maybe you are looking for