DC Creation Error and Check in Error

Hi Friends
When I am created DC under SC (Software Component) I am getting this warning message. Click on FINISH Button that time I am getting this Warring message. Click on OK Button that time DC will created in Webdynpro Perspective. But I am not unable to see that DC in Under SC. When I have Restart the NWDS that I am able to see the DC under SC.
WarningMessage Development component Creation Completed with some Problems
Reason: Some used DCs are not avaliable locally. you have to sync used DCs for this project.
1. How to Solve the issue?
After I have go to Open Activity Pan here I was do Check in In all ready existing activity. Now the Open activity pan I am unable to see that activity.
Now I am go to Activity Table Here I will refresh and Check it that that activity here also unable to see. That time I am getting this Error
Retrieving pending activities failed: CBS Server Error: The compartment for given software component is being initialized( internal code: BS_SC_META_DATA_NOT_AVAILABLE)
1. How to Solve the Issue?
Please tell me How to solve these Problems?
Regards
Vijay Kalluri

Hi,
The warning message is due to :Some of the used dcs are missing for the respectiveDC.
In NWDS->open the Dc prespective->inactive Dcs->rightclick on the selected Dc and select SynDC->Select all and click ok.
You can also check that,which is your used dc from wd explorer->Expand the project->under used webdynprocoponents
->get the name of the used dc
Import that Dc into your NWDS.
Resync the used DCs.
Regards,
Lavanya.G

Similar Messages

Hp2175xi printer Remove and check cartridge. error message displayed on printer.

Remove and check cartridge error message displayed on printer. I have removed and inspected cartridges and no problems were evident. Shut down printer and restarted, unplugged and restarted same error displayed. Please help with any suggestions or solutions.
Thanks John

Hi
If the cartridge isn't empty and you've tried the usual troubleshooting (which includes cleaning the contacts on the cartridge and in the printer) then it's probably best to contact Phone Support for a possible replacement.
You can check if the cartridge is still within warranty by checking the warranty ends date here
Best Regards
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Error "Unkown Bravo Error" and "Invalid Container Error"

I am trying to render in After effects and keep getting the error "Unkown Bravo Error" and "Invalid Container Error". What do I do to resolve this?

Try using the "secret" preferences to purge every couple of frames. If you hold Shift while clicking on After Effects > Preferences > General, the Secret menu should pop up in the sidebar of the Preferences dialog.
Alternatively, if rendering to a QuickTime with the video codec set to PNG instead of Animation didn't work, try rendering to a PNG sequence and not a video format at all.

CHECKDB found 0 allocation errors and 1 consistency errors in table 'sys.syscolpars' (object ID 41)

Msg 2511, Level 16, State 2, Line 1
Table error: Object ID 41, index ID 1, partition ID 281474979397632, alloc unit ID 281474979397632 (type In-row data). Keys out of order on page (1:187), slots 9 and 10.
CHECKDB found 0 allocation errors and 1 consistency errors in table 'sys.syscolpars' (object ID 41).
CHECKDB found 0 allocation errors and 1 consistency errors in database 'db_name'.
repair_rebuild is the minimum repair level for the errors found by DBCC CHECKDB (adv_tvs).
Help required on the above error mentioned

Hi Rapunzel,
The minimum repair suggested is repair_rebuild you can try that. As per mssage there is corruption in your database and it can only be corrected by either repairing or Restoring from known good backup.For doing repair the database must be in single-user
mode.
Please read
dbcc checkdb repair_rebuild option
Since DBCC CHECKDB with any of the REPAIR options are completely logged and recoverable, Microsoft always recommends a user use CHECKDB with any REPAIR options within a transaction (execute BEGIN TRANSACTION before running the command) so that the user can
confirm he/she wants to accept the results of the operation. Then the user can execute COMMIT TRANSACTION to commit all work done by the repair operation. If the user does not want to accept the results of the operation, he/she can execute a ROLLBACK TRANSACTION
to undo the effects of the repair operations.
REPAIR_REBUILD does not repair errors involving FILESTREAM data.
How big is database. If it is small and backup also is corruption free you should consider restoring from backup
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

CDDB error and HTTP processing error

when I try to add a new CD to my library I get CDDB error and HTTP processing errors..... and download will only show the number of tracks and the time each track will play...this only happens on my PC.... and everything works ok on my laptop... I have tried the latest update...and I have compared settings between the two computers but haven't found the problem...

Since a recent update of itunes I cannot get CD track
names from Gracenote anymore. This problem only
occurs on my windows profile and not on other
profiles on the same computer. When I load an audio
CD, itunes recognises it but doesn't name tracks.
When I click on "Get CD track names" in the advanced
menu it starts as normal and then I get a window with
the message 'CDDB Error. HTTP processing Error.' I
have tried a second itunes download, which according
to the install wizard repaired all faults.... still
happening though. I don't have enough time in my life
to type in all the track names! Any help gratefully
received.
Sony Vaio
Windows XP
Solution document found!
Refer to www.info.apple.com/kbnum/n302538
Insert an additional step:
6a. Click on Disable All.
It takes a while to test one or a few items at a time, but it works! If you find these in your Startup list try selecting all and then unselecting these first. One of these was the problem for me but I haven't narrowed it down to one of them yet.
nwiz
SNDMon
dlbcserv
Copy Protection Notifier
Good Luck.
disaacson1
Toshiba Satellite P25 PC Windows XP

"Remove and check cartridge" error message

My Dell Latitude died. It was hooked up to my hp psc 2110 all in one printer.
After completing the set-up basics on new laptop, I downloaded the drivers for the printer successfully. A test was successful.
Next day, I tried to print. The printer told my laptop that the ink was low. Installed new cartridge; hit enter to align. It went all the way through alignment, but would not print. Instead it posted the scrolling message “Remove and check cartridge”.
I removed and reinserted the cartridge and nothing changed. Same message.
Expensively (I really needed to print), I inserted a new cartridge. The printer started to align the cartridge. At the second bar it froze. I watched the two unchanging bars for twenty minutes.
Since then (in this order) I have:
Turned off the printer for ten minutes and turned it back on. It started scrolling (?) “Remove and check
          cartridge”
Uninstalled then downloaded the drivers and tried all again.
Left everything off for forty-eight hours.
The troubleshooter from the computer couldn’t identify the problem, but said the toner was fine.
I could not print a self-test report because no matter what button I push nothing changes.
Opening and closing the top section (in order to replace cartridge) makes the cartridge move, but does
               nothing to the message.
http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=1
               10&prodSeriesId=295848&prodTypeId=18972&supportTaskId=42089 does not have this error
               message
Looked at and tried all suggestions on HP forums.
The three little green lights (best, normal, fast) flash together.
It still only scrolls “Remove and check cartridge”.
I have not hit it.       I am out of ideas.           I cannot afford a new printer.
PLEASE HELP.   (Please keep it clear and simple.)
hp psc 2110 all-in-one printer · printer · scanner · copier MY342F5744    C8644A   Made in Malaysia
        (inside:   MY342F5744    C8644-60002)
Windows 7
Toshiba Satellite L770
Thank you.

I, too, gave up, and purchased a new cartrige. At least for me it did the trick.

While importing a request error message' Check-sum error in data file'

Hi Friends
I have a problem.
We are trying to inport a request after putting the files in cofile and data file folders( 4.6C System).While doing so an error message is seen in the log " Check-sum error in data file after XXXX bytes".
Can some one help me with this?
Thanks
Regards
Ankur

Hi Ankur,
It is sure your file is corrupted or not present.
Check in cofiles and data directory under /usr/sap/trans your transport request number.
Best Wishes.
Kumar

BPC DeleteOlapDimFromCube error and Analysis Sevices error (-2147221421)

Attempted to process a dimension in BPC and encountered the following error message:
-DeleteOlapDimFromCube : Item not found in collection
-Dimension is locked because it is currently being used in a cube. Remove the dimension from the cube
Went to Analysis Services and successfully procesed the dimension and all but one of the applications.
Error message recieved was:
Error(-2147221421) Internal error could not update the query log.
Any ides?

It seems for that specific application you have bad data into fact tables or cube is corrupted.
First you have to check the data using query like:
select count(*) from tblfact"application" where "dimension" not in (select count [id] from mbr"dimension where calc = 'N')
this should always provide 0 like result.
If you receive any result <> 0 then you have to delete the records using delete instead of select count(*).
From error message it seem the cube is corrupted.
In this case you have to delete from Management studio the specific cube for your application and after that from Admin console of BPC you have to do modify application with full process and reindex.
This should fix the problem.
After that probably you will be able to any task using that specific dimension.
Kind Regards
Sorin Radulescu

Video feature on iChat AV = "not responding" error and the -8 error

I have been looking all over the forums all day long and it seems like anyone has yet to provide an obvious solution. Here's the problem:
I used iChat's video chat feature just fine (logging in through port 443) with my external USB camera, Ecamm's iMage. It worked fantastically. Now, all of a sudden, I go to do a video chat this morning and poof it says either that 'I'm not responding' (despite the fact that I was the one who sent the invitation) or there was a connection error (-8) when the other person sends it. I didn't change anything in between yesterday and today, on my router, computer, anything, but it doesn't want to work anymore. The other people are using iChat AV as well, as they're MacBook owners. Here's the low down.
Firewall settings: Has always been turned off, but just to make sure, I added those six or seven ports listed on the Apple website (three of which are for Jabber, but I don't use that) [5190, 5220, 5222, 5223, 5298 for the TCP, and 5060, 5190, 5297, 5298, 5353, 5678, 16384-16403 for the UDP] under a separate option entitled "ichat" and checked the 'allow' box.
Router: Netgear WGR614 v6 (54mbs)
Internet provider: Cox Communications (up to 7mbs download, up to 1.5 mbs upload)
Quicktime settings: I already saw previous threads and it's on the 1.5mbs thing like they suggested.
I did a test chat with the 'iphone video' test receiver, username "appleu3test01" on ichat and strangely, it worked...
ichat preferences: Already deleted all the old preferences in the folder and started anew but it still didn't want to work. The video settings are not set to limit the bandwidth either.
Please help!!!!!

I also know it's nothing to do with the actual internet connection, because I contacted Cox Communications about something I saw mentioned on another thread [Sounds like the ISP is now offering a VoIP service (Blocks SIP ports) and wants to make some money for the "extra" service.] and they confirmed they hadn't changed any settings or configurations, and don't have any sort of VoIP blockers of any sort or limitations on the *high speed internet connection*.
Any ideas?! I just (four days ago) bought this webcam and now all of a sudden it's rendered useless because of a random iChat problem? The techie at the Mac store said he'd had this problem and it just sort of randomly worked itself out a couple of months later... eyebrow Is there nothing I could try?
P.S. I'm not a technie, so when people start talking about changing stuff in the router I need explicit, dumbed-down, step-by-step instructions please!

Confuse between temp file error and perment file error

during the weekend, i usually maintain our database and this weekend i end up with strange situation,
i lunched my scripts to reorginize datafiles, however the scripts is crash all the time due to weird message which is in my opinion is misleading ora message.
this is the situaion:
i am using this scripts to tell me if my datafiles are full or not
1 L_INDEX 24 107.12109375 103.74609375 3.375 0 96.8493600262553 3.15063997374467
2 L_TABLES 30 108.2939453125 97.1689453125 11.125 0 89.7270341680719 10.2729658319281
as you can see, the free space on the l_index tablespace is now 3G and need to reogrinze to free space, however when we run our scripts to free spaces by moving objects to tools tablespace and then return them back,
I recieve this message:
ORA-01652: unable to extend temp segment by .......
to solve this error is adding new temp files, however we have 5 temps file and there were pantly of space there and also i add 2 new files with size 1g and maxsize is 32G, still i am receving this error and my scripts crash when i try to rebuild the index,
the workaround was is adding new datafile to l_index and try again to rebuild the index and it works,
so i am wondering if the problem was on the datafiles, why i recieved error about temp, i waste some time thinking that my problem was with temp, however the real problem came from l_index tablespace.
oracle verison is 10.1.0.4 and os is windows
Thanks

ORA-01652: unable to extend temp segment by Temporary tablespace is also used when re-creating or creating indexes in database.
A temp segment is created the moment create or re-build indexes command is issued and will be held until the index is being created completely. If either of the tablespace have insufficient space, you might get the error ORA-1652 or ORA 1654.
You should be looking at the tablespace name for adding space instead of looking temp segment.
ORA-1652: unable to extend temp segment by in tablespace

How i can fix "Wiki setting error" and "Running time error" ?

I've found this message when using server app on Mountain lion.
and this error data.
Can i fixed this? Thanks guys!

It so happens that I saw an answer to a similar question today somewere else. I have not tested this myself:
"I have the final solution and fix but beware you may not like it that much.
Having had all of the above problems with more or less everything I finally pieced it all together from various threads. This will fix both the AEBS control and the central services problems. Dont shout at me for being a bit basic and not coding etc. but it worked for me. If I can avoid code I do as often as possible as am less likely to balls it up!
This method will loose some data but the main files and users do remain
The Fix:
1. Close Server.app
2. Library/Server make a copy of Server file under a diff name as software server files and a few others would appear to still be usable and you will have to re download it all again of you dont copy it back in ( I didn't and now have learned my lesson). then delete the whole of the Server file.
3. Go to Keychain and search all Airport then delete associated keys permissions etc
4. Delete Server.app and reinstall.
5. Start new setup and it will migrate properly with no errors. This time a big green tick will appear!
6. Replace the software update files into the new Library/Server folder if you want to or leave it untill the rest is done
7 Reconfigure any missing bits..... any enrolled devices will have vanished but probably if you have saved the data from this in Library/Server prior to deletion you may be able to reinstate this but I didnt risk it
This is going to be a total pain if in a large organisation but once working the system is excellent with no swapping from one control set to the other. As each service is switched on it auto configures the AEBS and no further errors and a joy to work with unless you really like to get into the nuts and bolts.
Hope this helps and good luck"

TestStand Test Environment adapter dll error and Type Palette error

I am new to TestStand and I am having a problem opening a TestStand 3.1 standalone UI application. The UI was built a couple of years ago and others use it within my company without problem. I however get the 3 .DLL adapter errors and the Type Palette errors shown below when I try to open it and I can't figure it out. I have tried everything from uninstalling and reloading TestStand 3.1 and uninstalling the UI application and reloading and it did not fix the problem. I verified that the errored .DLL's are present in the Bin directory and the Type Palette files are present in the Type Palette directory. I asked other more experienced TestStand developers within my company if they have ever seen this or knew what was wrong and they can't explain the errors either. Any suggestions?

Cole - There are probably many differences between my machine and that of my counterparts but they have told me that the only thing I should need to run this standalone TestStand GUI application is TestStand 3.1 and Microsoft .NET Framework which I do have.
The standalone GUI application is a common front end application that we use for a large part of our production testing at my company. It allows us to have a GUI based front end to our TestStand sequences for running testing in a production environment so the operators can see the test running step by step on the screen. We have the GUI application installed on multiple different Production machines (probably over 10) and all are different machines with different software installed on each. the only real common aspect between them that we ensure is that they all have TestStand 3.1, the GUI application, and .NET Framework installed.

Sync "Unexpected Error and must close" ERROR

Tried using desktop 4.6 and 4.3.
New Dell PC with XP Pro
whenever you try to sync data files or configure sync, I get an unexpected error and it says it must close the program.
Any help would be appreciated
Bigweil

Hi and welcome to the forums!
Please specify the following:
Version of Outlook.
Version of Desktop software currently installed.
Model of phone and OS.
Thanks
Message Edited by Bifocals on 11-08-2008 10:43 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Darwin/BSD startup error and second level error

I woke up this morning to find the world as I know it in disarray. My G5 was not booting to its normal screen but to the black ominous Darwin/BSD screen.
I researched this awesome forum and found to login as single user mode (cntrl S)
This led me to the root# where i typed /sbin/fsk -fy
The bottom of this read as:
** Checking HFS Plus volume
** Checking Extents Overflow file
** Checking Catalog file.
diskOs9: I/O error.
Invalid key length
(4,260)
** Volume check failed
localhost:/root#
HELP!
Somewhere in the notes from the first time I did this I saw something regarding an autoshutdown and auto startup. Since this G5 is now in my bedroom I do have those features HOWEVER last night I shut down manually (not system generated) if that even matters.

Hi Jim, and a warm welcome to the forums!
It is likely that only DiskWarrior from Alsoft...
http://www.alsoft.com/DiskWarrior/
The CD version is likely to fix it, but you can try fsck repeatedly ubtil no errors occur.
Possibly...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, *you must select your language first.)*
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."

MXF frame read errors and general render errors since update to CC

Hi there folks,
Being a Creative Cloud member for a while now I share the benefits of immediate updates of CC products. However, I also get to deal with the downsides, it seems.
Since I updated to CC versions of the entire Adobe Collection I experienced unprecedented trouble with After Effects. I'll mention the most pertinent errors:
- I used to render short compositions to uncompressed HD Quicktime, functioning as a master render for future sorts of output for my clients or just to have optimum quality before further conversions. For some reason AE CC has been generating all sorts of video dropouts lately, especially when audio render is set to 'auto'. Furthermore I noticed that the only audio res that I can choose in case of an uncompressed QT render is 8000 Hz. This is new in AE CC, I don't understand the reason for this modification since the previous AE versions never had this limitation.
I must mention the fact that other output formats and codecs also suffer from dropouts, be it less frequently than QT uncompressed.
- Imported MXF files from my customers which I incorporate in AE compositions are also full of dropouts. Every dropout shows up as a single frame (two fields) of red or black. Premiere Pro encounters the same problem and reports the dropouts as frames with a read or decode error. I checked some older MXF files in previous AE projects that have been rendered and delivered perfectly in the past, but these old MXFs now appear to have the same issue. I tested the older and the new MXF on another PC that wasn't updated to CC versions and found no dropouts at all. Something must have changed in the updated codecs that belong to the CC version. All MXFs play fine in VLC player on all systems, so it's not the video source being faulty. Anyone recognize this?
I do get notifications of CC product updates, but is there a way to just update the codecs? Maybe there is a better codec for MXF.
Any help is truy appreciated!

Like often, it's better to wait a little until there's enough people experiencing the same problem. So everyone here: thanks for responding to my post! In the end it seems to have helped, considering the update of Adobe. I am still a little precautious, because some MXFs give no red frames at all (input side I'm talking about) and others still do, but then the strange thing is that scrubbing the MXFs forth and back a bit results in having less red frames to none at all in the end. The red frames now disappear and then re-appear on different points in time of the MXF file, whereas I always found them being bound to specific and unchanging points, especially on the first frame of a scene change for instance.
Anyway, Adobe Media Encoder is not suffering from this problem, so there is a workaround, converting the footage before using it in AE and Premiere. That's good enough for now. But the problem hasn't vanished yet. Another problem that I had with rendering uncompressed HD Quicktime videos that always generated dropouts has all of a sudden magically disappeared. Thanks Adobe. I see progress.

DC Creation Error and Check in Error

Similar Messages

Maybe you are looking for