DC Stock rationing across multiple receiving sites

Hi experts,
We have a business requirement to ration available stock held at the DC across multiple orders in the situation of a shortage.
The requirement is to do this rationing is based on the document type of the originating STO and Ordering Site classification, so that the most significant order type and most significant store gets the available inventory first.
We have 5 primary store STO document types and we wish to classify them from 1 to 5, 1 being the most imporant.
We also have circa 300 stores and likewise wish to classify them 1 - c.300, 1 being the most important.
Using this classification data we want to generate Outbound Deliveries from the STOs.
A simple example:
We have a Qty of 20 pieces of Article 1 in the DC available:
The following STOs have been generated:
Doc. Type 1 - Store 1 - Article: 1 Qty: 10
Doc. Type 1 - Store 2 - Article: 1 Qty: 5
Doc. Type 2 - Store 1 - Article: 1 Qty: 10
Doc. Type 2 - Store 2 - Article: 1 Qty: 15
We would expect the following Outbound Deliveries to be generated:
OBD 1 - Store 1 - Article: 1 Qty: 10
OBD 2 - Store 2 - Article: 1 Qty: 5
OBD 3 - Store 1 - Article: 1 Qty: 5
We need this processing to take place in the shortest possible time, as we have strict timings around orders being available in the DC WMS for picking due to a short lead time. We therefore want to maximise parallel processing, rather than just sequencing the running of VL10B to be one order type and one store at a time.
Any ideas on how best to achieve this requirement and how you would approach it?
Has anyone done similar types of rationing before?
Many thanks in advance!
David

Hi David,
You need to create a new allocation program for rationing the stocks to the stos. Once the STOs are created, run this program
to allocate or commit the stocks based on your logic.
Later you can create the deliveries based on the committed stocks of STOs.
regards,

Similar Messages

Sharing jar files across multiple web sites

Dear all,
We have an applet as part of an embedded device. I wish to share the jar files across multiple devices. i.e. Accessing 192.168.0.1 shouldn't download the jar files again if the same jar files exist in the cache as a result of download from 192.168.0.2. We are having very large applet jar files, hence reducing download times is a top priority. Is there some way to do that ? Will java web start help in this ?
regards,
Jay

generally for avoiding applet downloading again the best solution is to use applet cahing, just add cache_archive in your html code (for full reference please go to the jdk javadoc ). Of course the problem are diffrent ips 192.168.0.1 and 192.168.0.2, applet caching will work ONLY for one ip, when you serv second sever name/diffrent ip client jvm will treat this applet as something new and will download it . The best solution i think is to sever everything on one server page/ip etc, but as you mentioned it is not good solution.
Well you can make it if you want to serve your big jar file on diffrent ips/severs, How? You should ctreate small certified applet jar , inside it should be code that will download your huge jar file from any location you want and store IT on CLIENT machine, becouse that jar will be certified so applet with file functions will not ask user to accept dialogs etc, so that applet will create locall on client machine little cache were all files that were downloaded will be stored. And again when user will acess your page that small certfied jar file will check if cache folder exist and if inside it is your huge file.
cheers

I want to use spiceworks to report on the status of bitlocker across multiple

I want to use spiceworks to report on the status of bitlocker across multiple customer sites and domains, I didn't want to use MBAM as it is complicated and I just wanted to report if bitlocker was enabled or not.
There have been a lot of discussions but I was looking for some thoughts and experiences that were concise on the whole process ie how to implement spiceworks across multiple sites, and then into the reporting. Or is that too much to ask in one discussion?
Thanks!
This topic first appeared in the Spiceworks Community

If you are talking abount the ID is Settings>iCloud you will have to get the persions to give you the ID andpassword or get them to remove the iPod from their account
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
also see:
iCloud: Find My iPhone Activation Lock in iOS 7

Rationing available stock at the DC across multiple orders by priority

Hi experts,
We have a business requirement to ration available stock held at the DC across multiple orders in the situation of a shortage.
The requirement is to do this rationing is based on the document type of the originating STO and Ordering Site classification, so that the most significant order type and most significant store gets the available inventory first.
We have 5 primary store STO document types and we wish to classify them from 1 to 5, 1 being the most imporant.
We also have circa 300 stores and likewise wish to classify them 1 - c.300, 1 being the most important.
Using this classification data we want to generate Outbound Deliveries from the STOs.
A simple example:
We have a Qty of 20 pieces of Article 1 in the DC available:
The following STOs have been generated:
Doc. Type 1 - Store 1 - Article: 1 Qty: 10
Doc. Type 1 - Store 2 - Article: 1 Qty: 5
Doc. Type 2 - Store 1 - Article: 1 Qty: 10
Doc. Type 2 - Store 2 - Article: 1 Qty: 15
We would expect the following Outbound Deliveries to be generated:
OBD 1 - Store 1 - Article: 1 Qty: 10
OBD 2 - Store 2 - Article: 1 Qty: 5
OBD 3 - Store 1 - Article: 1 Qty: 5
We need this processing to take place in the shortest possible time, as we have strict timings around orders being available in the DC WMS for picking due to a short lead time. We therefore want to maximise parallel processing, rather than just sequencing the running of VL10B to be one order type and one store at a time.
Any ideas on how best to achieve this requirement and how you would approach it?
Has anyone done similar types of rationing before?
Many thanks in advance!
David

Hi James,
Thanks for the information, we are using IS Retail 4.7.
The complexity we face is that we need to create outbound deliveries off a collective STO generated via Merchandise Distribution with SLS. So this STO is effectively one site along the chain from the originating store.
We're trying to ration the stock at the source DC across the collective STOs by Document Type and Originating store.
So that the most important Order (IE promotion etc) and the most important / profitable store get the stock.
For example, we wouldn't want our "New Store STOs" (of which the store may not have even opened yet) and not be able to give any stock to our biggest store who's get a promotion this weekend.
I know the simple answer is don't run out of stock, but we try to run a tight ship on quite a few articles, so we need to ensure we give it to the right store and for the right reason.
Hope that helps explain the scenario in more detail.
Many thanks,
Dave

Custom template available across multiple site collections

I have created a custom site template which I need to be available across multiple site collections. Is there a global area where I can put the .wsp file so that I can use it within any site collection.
I also have a custom document library which I need to be available from with the site made from the custom site template mentioned above - Is there a global area where I can put the .stp file so that I can use it within any site within any site collection.
thanks

This will really depend how the template has been packaged. If it's a content type, than editing this and making sure that the "update content type" radio is selected will do the trick. Can you ask someone who's made one to show you how they generate
the template. If it's within the New --> XXX Document, than you're in luck
If they're just deployed as normal files within a library, you'll have a much harder time.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Find and Replace Across Multiple Sites

Hi,
Just wondering if anyone knows a way or a piece of software
that enables you
to Find and Replace code, text etc across multiple sites?
I am using DWMX2004 and I can do it on a per site basis but
not multiple
sites at once.
Any idea's???
Thanks
Darrell....

Alan wrote:
> IF these dreamweaver sites are all in a common folder,
like
> sites:siteA and sites:siteB and so on- You could make a
new dw site that
> has the common root folder "sites" as it's Local folder.
Find and Replace
> sitewide while in that site would effect all the files
within the defined
> folder.
You don't have to define a site, Blue, just select a folder
to search.
Mick
>
> also, other text editors have good find and replace
features.
>
> back up, back up, and then make another back up copy.
>
> If working with links in this "super site" definition-
be aware of the
> possible problems of defining a site where the root
isn't the real root.
>
>
>>Just wondering if anyone knows a way or a piece of
software that enables you
>>to Find and Replace code, text etc across multiple
sites?
>
>
>

How can I display selected tags across multiple e-mail addresses?

I receive email on a specific topic but via several e-mail addresses. How can I view selected tags where the resulting e-mails span several (7) email addresses. They are all active on my Thunderbird, but as far as I know, I can only display the selected tag on one of them at a time.
Any assistance greatly appreciated as this is a very big problem for me.
thanks, Ron75

This solution does not appear to work across multiple e-mail addresses.
Perhaps I should have said "work across multiple e-mail address at the same time. I get e-mail on specific topics via several email addresses and wish to view all the tagged emails regardless of which email account in which they reside.
I could not get this solution to select more than one email account at a time.

Simultaneously triggered acquisition: Multiple PXIe-7962R + NI-5734 cards, across multiple PXIe-1085 chasses

Hi all,
I need to do high-frequency, high-channel-count acquisition.
Specs
Signals: 10 MHz, 60 channels
Controller: PXIe-8135 (Windows 7)
Chasses: PXIe-1085 (2x)
Input cards: PXIe-7962R FlexRIO base with NI-5734 digitizer (15x)
Description
Each FlexRIO card will store data in circular buffers, and continuously monitor the voltage levels. When any one channel exceeds the user-defined threshold, all 60 channels need to be triggered simultaneously to pass waveform data (200 μs pre-trigger, 300 μs post-trigger) to the host OS for logging.
In other words, every FlexRIO card needs the ability to fire the trigger, which is then received by all 15 FlexRIO cards (the card that fires the trigger also needs to receive the trigger).
Question
Can I achieve this with only a single PFI line? Or do I need some other technique?
I've found some examples, but they only show single-source and single-card triggering, e.g. https://decibel.ni.com/content/docs/DOC-30182 uses one analogue input to trigger the acquisition of 2 channels on the same card.
Any advice would be much appreciated. Thanks!

Assuming you are using LV 2013 or 2014 you should download version 1.3.4 of the FlexRIO Instrument Development Library (FIDL). This will install 5734 Acquisition Engine examples which use the MultiRecord Library to stream data to the DRAM in a circular buffer, allowing you to recover pre-trigger samples. The example also demonstrate how to implement the Syncrhonization Library that synchronizes triggered acquisition to within a single sample period across multiple devices.
Getting the example to work across two chassis' may be difficult, but I believe it is possible. Though to do so you will need a timing and sync module in each chassis to distribute the triggers and reference clock that the sycnrhonization library requires.
National Instruments
FlexRIO Product Support Engineer

Check Payment Processing Across Multiple Operating Units

Hi There
We are currently implementing Oracle R12 at the company I work for. Our solution implementer has informed us that you cannot process one check (cheque) payment across multiple operating units and that this is an outstanding enhancement with Oracle. Therefore (if we accept) this we will have to process a seperate check per operating unit which will increase our payment processing significantly.
Can anyone out there:
A. Confirm this is indeed an issue
B. Are you aware if Oracle are doing anything about it and
C. Is there any workaround that we could consider to lessen the impact.
Thanks

Hi,
Scenario 1
If you are going to make Single check payment to the same supplier having different sites under various operating units, oracle has provided a workaround, i.e. to make a manual payment in payables module, however it would not generate any payment instruction.
Scenario 2
If you are going to make single check payment to various suppliers in different/same operating units, it is not allowed by Oracle, as there is no logic behind it. You cannot have 1 check generated for different suppliers ...
I am assuming you are referring to Scenario 1, in which case, i would say there is an WORKAROUND suggested by Oracle to make use of MANUAL PAYMENT method, which you could discuss with your Solution Implementer.
Regards,
Ivruksha

UCCE 7.5 - Queuing Across Multiple PGs

Hi guys,
I'm working with a client running UCCE 7.5 with CVP with agents across multiple PGs and are now wanting to look at having call flows with calls queuing across multiple skill groups across multiple PGs. Can I just queue to an Enterprise Skill Group with the relevant Skill Groups at each site in the Enterprise Skill Group? I've never had to queue across multiple PGs before so just wanted to clarify how I need to approach it.
Cheers,
Nathan

You don't even need to use an Enterprise Skill Group if you don't want to. You can just add the individual skill groups in the Queue node.
Also, keep agent transfers in mind when splitting calls across clusters and make sure your dial plan supports whatever transfers will be necessary.

Searching for links across multiple pdf files

We have thousands of pdf files that are being moved to a new website. Some of these pdf files have links within them (either as text or as a hyperlink). This number is unknown.
The issue is how to programmatically search across multiple pdf files (numbering in the thousands) looking for links using a regular expression or part of a path. This will have to be able to search behind the text and search for the link url.
We first need to identify the number of files with links and create a list of the files with links that need modifying. If the number is too great to modify manually, then we would need the ability to programmatically edit these links.
The pdf files are stored in a database. Also, the pdf files are different versions and some are password protected.
Is there an Adobe product that will perform this? If not, are there any 3rd party vendor products that will accomplish this?
Thanks in advance for your help.

I have no solution, but a thought: the database factor may seem to be
a killer. But you could look for a solution designed to read PDF files
from a web site (by spidering or from a list), which would presumably
load them.
Or could do a one off extraction of the files from the database into a
directory and use that for your process. Probably a very good idea,
since extracting all files from the database is likely to be costly
and hammer the server (but can be scheduled at a sensible pace), while
the search process will (if it is possible at all) doubtless need to
be run countless times.
Aandi Inston

Session state variables across multiple ApEx applications

We have a suite of loosely integrate ApEx applications that all share a common authentication scheme. When you first log in we attempt to load a series of session state variables with temporary data to streamline various logging and authentication related activities for the life of the session.
However, these session variables seem to disappear when you move from one application to another, so they are not truly tied to just the "session" which carries over across all applications, but the application from which the session state is set.
What is the suggested way, keeping in mind that the data being held may have security related context, to preserve values during a session, but regardless of which ApEx application you are in.
The method we are using to share the authentication is using a common "Cookie Name" from a common subscribed authentication scheme as suggested elsewhere on this site and seems to work very well outside of this specific issue.
Thanks in advance,
Barney

Apologies for the delay getting back on this.
My use of the word "disappear" was probably misleading. They were not visible from the second application. When setting "Session State" I was under the impression that it was setting it for the authenticated session, not for the specific application. (I am referring to the: apex_util.set/get_session_state).
Your solution will work fine, as long as I know which application the user last authenticated against. However, it could be one of over 30 (and growing) different applications which would require me writing a program to go through every "p_flow" to try and find a valid value every time I need to reference the field.
It would be really beneficial if you could store true Session variables which stay alive for the life of the authenticated session and is available to anything authenticated against that session id. This would streamline alot of cross-application program development.
The "get/set_session_state" is a misleading as it is not a Session value, but an Application value. The Session exists across multiple applications, while this procedure does not.
Thanks,
Barney

Skip lot across multiple batches for same material

Hi,
I am looking for a way to control skip lots across multiple batches for the same material.
We need to do a quality check in production after a certain quantity produced (on a machine, for a material). My idea was to do skip lots (for GR) until we reach a threshold (say 10.000 pcs) and then do an inspection for the next GR for that material.
Any ideas how to set that up?
Thanks for any hint
Andreas

Hi mergler,
Ref to your query pls check this link Stock Posting for Skip Lots
Thanks in advance

Do I need multiple primary sites? Some design questions..

I have about a thousand users & devices, across two sites. Setting up SCCM 2012 R2 and wondering if I need to have multiple primary sites?
From everything I've read so far, it seems that a single standalone site will handle tens of thousands of users/devices or some very large number, so I'm not sure if I'd ever need a secondary site or what it's function would be - failover, backup, or is
it just best practice to have different roles spread across multiple servers?
I was originally thinking of just doing a single primary site on a single server. But then I'm not sure if my DP should be separate.
Can someone point me the the right direction to a high level planning document or blog?
Thanks
Nathan

How many clients are there in total? How many at each location? What's the WAN speed in between?
Multiple primaries are only needed for scale out purposes (>100k clients)!
Torsten Meringer | http://www.mssccmfaq.de
About 500 at each, T1 speeds connect the sites, so I want to enable software metering I think.
Also - if I have a single server with DP role installed, what kind of RAM/HD requirements are needed? I know this probably varies with the install/features, but are there any ballpark estimates/starting points posted? Sorry I know this is probably
on the MS site somewhere, the the volume of information is hard to weed through. Update, I found some good guidelines here:
http://myitforum.com/myitforumwp/2012/06/27/sccm-2012-site-hardware-requirements/
For 1000 or less users, is a single Gb NIC sufficient? Sounds like it might be? Also, when using a virtual machine, do you need to still somehow separate SQL logs & data from OS?
Update #2, looks like that above post answered that question too:
If you’re in a VM, it’s not sufficient to have a single VHD file, and having the roles split among 4 virtual drives inside that file. It’s not sufficient to have that single file on a shared set of remote disks. It’s not sufficient to have that
single file on a dedicated set of disks, regardless of the number and size of those disks. Any VM should be configured to only run the OS, and the 3 other spindles should be dedicated sets of disks, attached to the VM. Otherwise, it’s like painting
with watercolors in a hurricane…you’re spending a lot of time, looking creative, with zero value.
But I'll take any follow up comments or recommendations if you have them on proper VM setup.
Thanks
Nathan

Sender from multiple ftp sites

Is it possible to configure a sender file communication channel where the file is picked up from any of three ftp locations? For example, if the client has say 3 factory locations and they want to maintain local ftp site to drop their files but if we were to process the files from a common interface, would it be possible to either
1) Configure multiple ftp sites as the sender location in one communication channel, so that the file is picked up regardless of which ftp it is placed on?
OR
2) Have one sender agreement where multiple sender communication channels can be specified so that the interface is triggered whenever the file is placed in any of the ftp locations (and hence any communication channel receives the message)

hi yea it is possible to provide multiple location from where a file could be picked up.
go to ur Sender communication channel and select the check box "advance selection for source file" and enter multiple location for ur file
so u requrie on one sender agreement for it
please have a look at this link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/frameset.htm
hope this is useful to you.

DC Stock rationing across multiple receiving sites

Similar Messages

Maybe you are looking for