DCOM access failure between forests

In the process of setting up a single System Center Data Protection Manager (DPM) Server to protect domains in multiple forests, I have run into a show-stopping problem.
For all the child domains within the same forest a two way (child) trust exists and everything works fine. However, for domains in another forest, for which a two way (forest) trust exists, all attempts to use WMI / DCOM fail saying the RPC server
is unavailable.
For reference, system A is in forest X and system B is in forest Y. A two way forest trust exists between X and Y. In addition, all the necessary DNS forwarding is in place to allow name resolution to succeed.
System A can successfully ping system B. System A can also use the net view command to view the SMB shares of system B. System A can also use the sc command to communicate with the SCM on system B.
However, any attempts to use WMI fail. Either using the PowerShell Get-WmiObject or the wmic command.
It really seems like there is some DCOM configuration problem, but I have been unable to determine what it is and fix it.
Suggestions, hints, what ever are welcome.
- Mark

Hi Mark,
To troubleshoot the error "The RPC server is unavailable", please follow these steps below:
1) Check that DCOM is enabled on both computers. Check the following registry value: HKLM\Software\Microsoft\OLE, value: EnableDCOM,'Y'
2) Check the relevant remote access or WMI-related services are running:
Remote Access Auto Connection Manager
Remote Access Connection Manager
Remote Procedure Call (RPC)
Remote Procedure Call (RPC) Locator
Remote Registry
3) Check the firewall issue on the remote computer:
Temporary disable the firewall and retry the cmdlet, if the cmdlet works now, please investigate the firewall inbound rules.
I hope this helps.

Similar Messages

When in Windows 7 (using bootcamp obviously) I am able to see my files in my Mac partition. When I try to access them I am told that I need permission from the administrator. How do I give myself permission to access files between the two partitions?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

Questions in the migration between Forest A to Forest B

Hello Team,
We have the following environment and questions, please advise.
Environment
Forest A with the following roles:
Domain Controller
Dirsync
ADFS
ADFS Proxy
Exchange 2013 onpremise server with no mailboxes hosted in it.
Has trust between Forest A and Office 365 tenant.
All the mailboxes has already been moved to office 365 tenant.
Requirement
Want to bring in Forest B
Then going to migrate all the users from Forest A to Forest B
Then going to decommission Forest A and create trust between Forest B and office 365 Tenant.
Questions
What are the implications and how long do we need to schedule downtime?
Will there be any impacts?
How & when can I manage (enable/disable) Dirsync, ADFS, ADFS proxy?
How can I transfer these roles (Dirsync, ADFS, ADFS proxy) to Forest B?
Please advise. Thank you for your time.

Hi Balamurugan,
According to your posting, I noticed that all mailboxes for users in ForestA have been moved to Exchange Online (Office 365) and there is no mailbox in Exchange 2013.
Sorry that I am not familiar with the Office 365 tenant. I am not sure about the impacts for mailbox in Exchange Online when you migrate all users from ForestA to ForestB. I suggest we can ask a question in Exchange Online for more suggestion:
http://social.technet.microsoft.com/Forums/en-US/home?forum=onlineservicesexchange
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thank you for your understanding.
Regards,
Winnie
Winnie Liang
TechNet Community Support

Repository access failure

hi guys,
i'm new to AS now we start the machine and start the infrastructure as usual but the OC4j_security failed and when i press start it says in the error log: repository access failure??any help plz

Is the infrastructure database and listener up and running?
Are you using 10g(9.0.4) or 9.0.2?
If 10g try the following after starting the machine:
1. Start the database - am sure you know how to do this.
2. Start the listener - $ORACLE_HOME/bin/lsnrctl start
3. Start all the other insatlled opmn managed components
$ORACLE_HOME/opmn/bin/opmnctl startall
If you have a Portal and Wireless Mid Tier associated with this infra that you also need to start simply fire off:
$ORACLE_HOME/opmn/bin/opmnctl startall
To start the EM processes in each home should you need to access the EM console use:
$ORCALE_HOME/bin/emctl start iasconsole
Try the above and see if this gets you passed the repos issue.
cheers
Nick

Connection failures between iMac and Macbook Pro

I'm experiencing frequent connection failures over my wi-fi network between my iMac and Macbook Pro on an otherwise strong, stable network. I can connect both of my computers to the Airport Time Capsule that I use as my wireless router without a problem, but for some reason I get connection failures between the computers say, 50% of the time. Sometimes it works fine, others it just hangs before giving me an error message. Any suggestions?
OS 10.9.3 on both machines
Apple Airport Extreme Time Capsule
iMac, 3.06GHz i3 (2010)
Macbook Pro Retina, 2.4 GHz i7 (1st Gen)

Hi jt in nyc,
Some checks:
Use Airport Utility on one of the machines
- Click on the Time Capsule ( enter password if prompted )
- Click on the Edit button
Under Airport Utility -> Wireless -> Wireless Options
Are the Time Capsule Wireless options set correctly?
- Country -> you know this, change if it is not
- 2.4GHz and 5GHz Channel set to Automatic
- Click on Cancel button to return to the Airport Utility graphic diagram.
- Click on the Time Capsule
- Click on your machines listed beside wireless clients
Are the machines reporting an excellent quality at different distances from the Time Machine?

Error target device access failure

After my return from a week vacation I have not been able to get my MAC Mini server (late2009) to start up. Now I'm able to run a test, which is running right now, but have received error "target device access failure".
Any help or how I can start up my MAC mini will be greatly appreciate it.
Thanks,
Hector

You're not really working with a 10-hour timeline, are you? You can only fit about 60-70 minutes of video on a standard DVD -- maybe twice that on a dual layer disc.
In any event, the best way to find out what's going wrong and when is to use the troubleshooting steps in the FAQs to the right of the forum.
http://forums.adobe.com/thread/415318?tstart=0
If you'll post the results for each step in as much detail as possible, we can help you figure out what's going wrong and how to fix it.
BTW, you're not combining MPEGs and AVIs in the same project, are you?
You definitely want to convert those MPEGs first to AVIs so that only DV-AVIs are going into a project and that project. It will certainly save you a lot of heartache (as well as having to deal with strange interlacing issues) later.

Personal File Sharing failure between Leopard MBP and Tiger iMac

Hi,
I am attempting to give the iMac access to files on the Leopard using Personal File Sharing. Personal File Sharing is turned on on the MBP. The firewall on the MBP has been variously set for Essential Services Only and turned off. The firewall on the iMac is off (it has no internet connection). I have tried both encrypted and unencrypted ad-hoc wireless networking on various channels. I have tried ethernet. The results are always the same:
1) the MBP will appear in the Network folder of the iMac, but any attempt to connect fails. I am unable even to reach a Drop Box.
2) the iMac appears in the Shared section of the Sidebar on the MBP, and connections of all kind work without problems
I have no internet connection in the house and am unable to try connecting both Macs to the same WiFi network for testing purposes. I have tried pinging each machine from the other using Network Utility, with failure reported in every case ---however, I'm led to believe this is not unusual in small network circumstances.
One other piece of info that may be relevant: I am also struggling to have my iPod touch found by my MBP when attempting to use the WebDAV protocol to share files with Files Lite. My iMac connects to Files Lite without issue. Stanza Desktop also refuses to find Stanza. Cyberduck will find Files Lite on the network from the MBP (the only app to recognise it in any way from my MBP), but will consistently fail to connect. Perhaps this is related?
Any help would be welcome. I can provide more information as needed. I have only offered the information I thought would be useful, and that fits within my layman's understanding of networking.
Thanks.
S.

Hi,
Well, it's all working fine now. Seems I /hadn't/ tried turning off the firewall on the MBP. The PFS now works with the firewall off or with "Set access for specific services and applications", but not "Essential services only".
*shrugs* I was so sure I'd tried it with the firewall off…
So, thanks! All is now kushti. I may have to grumble to myself a little (and ultimately to Apple) about the lack of co-operation between the firewall and the Sharing prefs, and what I perceive as a poverty (or at least poor layout) of information in the firewall settings pane, though. I mean, why can't the firewall automatically choose the correct setting depending on the Sharing preferences? Or, at least, provide a pop-up that such a change is necessary? Hmm…
Ta!
S.
PS: FYI, "guest" sharing was already enabled, presumably by default.

Complete wireless internet access failure:(

Ok everyone, here is the low down for the last month.
I use a 2005 ibook G4, access internet and email set up w/ Mac Mail thru my airport card and jump on wireless cafe that i live next 2. For 3 whole months, i was set up and running internet and email perfectly. I didn't change any setting, service, etc. Except the network from cafe (from linksys to RGII).
1st: as of 1/1, i lost my ability to send email thru Mac mail using wireless access (thru cafe). Error was "port 25 timed out". After spending 4 days with ISP, setting- resetting POP account and outgoing server, pinging port 25 to verify sent, scanning port 25 to verify, etc, etc, etc. This produced no resolution.
2nd: as of 1/21, I have lost complete internet access. I have run the network diagnostic to fix, no go...
SO, I took my ibook to the Genius bar at Apple store for a looksy. Sure enough some setting were off or changed, (by my own troubleshooting). After everything was checked and reset, all was A-OK (at the Store). I could access internet, received AND send email. Yippee!
NOW here is the tricky part... as soon as i got home and turned her on, I could see the airport finding networks (RGII), But when I try to access email or internet (thru Mac Mail, safari) it says my ibook is not connected to internet, same for email. I run the network diagnostic, and it can't fix problem.
When I go next door to see if the cafe is having router problems on there end...Nope everyone is accessing the internet just fine:(
This is NOT a problem with password etc, As the cafe is set up with authentication as NONE. Plus everyone there is able to use the wireless access.
So what do you propose is my problem? Remember this was all working fine for 3 months and started to fall apart this last month. In addition, to having eveything work just fine at the Apple store a mere 30mins before.
Could this be an issue with the RGII network i am jumping on?
Why would I be the only person effected and not everyone at the cafe?
ibook Mac OS X (10.4.3) wireless access at cafes

Though it doesn't solve your issue, I thought I'd
share that I can access many non-Apple access points
(Cisco 1200's, Linksys WAP54G's for example) with OS
10.4.4. This being so, I think we're safe to assume
the issue is not related to a recent OS update.
I'm afraid I must disagree with this. Few months back, I lost my Airport connection when I installed the 10.4.3 System Update. Fixed by restoring from backup and going back to 10.4.3. Managed to upgrade to 10.4.4 successfully and maintain wireless connection to a Compex 802.11g base station. Then I made the mistake of accepting the Airport 2005-001 update. Immediately lost my Airport connection. Other PCs can connect to the base station, and I can access the internet by connecting my Powerbook to the router using Ethernet. Can even see the Airport network and login to the router's admin page over wireless. Only thing that doesn't work is connecting to the internet wirelessly.
Once I changed my base station to an older one I had lying around, I can connect wirelessly again and all seems well.
My conclusion is that Airport Update 2005-001 definitely broke compatibility between Airport Extreme and some 3rd party base stations. The irony is that this update was supposed to "improve" compatibility !

Ms access 2007 between query for date

Dear All,
I am using the below query to fetch records from a table between two dates
select * from tablename where Format([VisitDate],"Short Date") >=Format(#01/10/2014#,"Short Date") and Format([VisitDate],"Short Date") <=Format(#31/10/2014#,"Short Date")
I want records between 1st Oct to 31st Oct only, but the above query shows Nov and December data also. Please let me know where I am going wrong.
Regards,
Noor
Thanks & Regards, Noor Hussain

The Format function returns a string expression, so the comparison is on that basis not on the date value. You do not need to worry about the format at all as the date/time data type in Access is implemented as a 64 bit floating point number.
You can see it in whatever date/time format you wish, but the underlying value is always the same. When you include a date literal in an SQL statement or in VBA code it must be either in US short date format (mm/dd/yyyy), or in an internationally unambiguous
format. The ISO standard format for date notation of YYYY-MM-DD is a good choice. So you query would be:
SELECT *
FROM tablename
WHERE VisitDate >= #2014-10-01#
AND VisitDate < #2014-11-01#;
Note that the range is defined as on or after the start date and before the day following the end date. This ensures that all relevant rows are returned. As there is no such thing in Access as a 'date value', but only a 'date/time value' it is possible
that a 'date' of 31 October 2014 could have a non-zero time of day element unless you have taken steps in the table definition to specifically exclude values with a non-zero time of day. Such date/time values would not fall within a range ending <=
#2014-10-31#, so would not be returned by the query. Defining the end of the range with < #2014-11-01# ensures that such rows are returned.
Ken Sheridan, Stafford, England

Accessing / communication between VM1 and VM2 both within a CS and within a VNET

Hi,
I have been trying to access one VM from another VM both within a CS and within a VNET. Let me summarise all that I have done in the last couple of days.
I have VM1 and VM2 in the same CS and same VNET. I have disabled windows firewall in both the vms for testing purpose. VM1 internal IP Address is 10.0.0.4. VM2 internal IP Address is 10.0.0.5. Both VM1 and VM2 are pingable from each other.
VM1 runs my own virtual device network I created using one of our virtual device tools. The IP range of the virtual devices is 10.0.0.6 to 10.0.0.13 When I ping from VM1 itself all the .6 to .13 virtual devices are pingable. [Additionally, I installed asset
scanner in vm1 itself and was able to scan .6 to .13 successfully and ping successfully].
VM2 also runs a asset scan software. I open a cmd and route add as follows:
>route ADD 10.0.0.0 MASK 255.255.255.0 10.0.0.4
where 10.0.0.0 is the target network which would include 10.0.0.6 to 10.0.0.13. 10.0.0.4 is the gateway.
Now, I go to the asset scan [running in VM2 with internal ipaddress 10.0.0.5]. From its web client I initiate a asset scan giving the IP range as 10.0.0.6 to 10.0.0.13. the software is not able to detect/discover the virtual devices .6 to .13 [the virtual devices
running in vm1] Why?
From this vm2, I pinged 10.0.0.6, no response. I pinged 10.0.0.7 no response.... 10.0.0.13 no response.
HOWEVER, we created the above scenario using 2 physical servers in our LAN and it all worked fine.
Where/what am I missing?
K.Lakshmi Shankar

Hi,
The ICMP traffic is blocked by the Azure load balancer and the ping requests timeout.
Note that while this applies to network traffic going through the external IP (VIP) through configured endpoints, ICMP is not blocked when connecting through an Azure virtual network gateway or ExpressRoute. Also, ICMP will work between internal IPs of VMs
in the same virtual network or in the same cloud service.
To test connectivity, we instead recommend that you do a port ping. While Ping.exe uses ICMP, other tools such as PsPing, Nmap, or Telnet allow you to test connectivity to a specific TCP port.
Hope this helps !
Regards,
Sowmya

Accessing data between oracle databases

dblink created between oracle9i(linux) and oracle7.1 (sco-unix)database.
When trying to access tables on 9i from 7.1 we are getting this error even after having run PUPBLD.SQL
SP2-0642: SQL*Plus internal error state 2091, context 0:0:0
Unsafe to proceed
Error accessing PRODUCT_USER_PROFILE
Warning: Product user profile information not loaded!
You may need to run PUPBLD.SQL as SYSTEM
Memory fault

You don't mention the version of 9i, but, Oracle 9.2.0 doesn't support connections to versions older than 8.1.7. 9.0.1 will connect to 7.3.4, but I can't say for sure about 7.1.

Auto discovery between forest trust.

HI,
We are merging to a company and set the forest trust. We are going to export our mail to their exchange and remove our exchange server.
We are login to our Domainold.com and currently outlook2010 clients are looking for our old domain exchange.
But how do i set this to go and find the New Exchange in our parent domain (newdomain.com) exchange and configure the client automatically?
AS

Hello Aussupport,
Currently your autodiscover URL is pointing to Old CAS servers, Please point to new CAS server, Please below command to set the required URL for Autodiscover Virtual directory, in below command , you can use Internal/external URL's how
you want
Set-AutodiscoverVirtualDirectory -Identity 'autodiscover (default Web site)' -ExternalUrl 'http://www.contoso.com'
like this please configure for all the virtual directries
always use external URL (ie FQDN of CAS form)
currently users are looking for Old RPC Client access server as their End point to access the mailbox resource, please point to new cas form

Accessibility : correspondance between buttons and menu items

Hello,
I have been dealing with accessibility API to retrieve information from menu items and buttons in tool bar. In addition, I would like to be able to create a correspondance between a button (let's say, the "new message" button in mail) and a menu item ("new message" one in the menu bar), since they perform the same action. Is there any way to process to this correspondance "automatically" ?I first wanted to check name matchings, but some item do not really share the same name (e.g. refresh button in Chrome).
How could I do that ? Is there any chance the button and the menu item might call the same "action handler" or something ?
thanks in advance

Use an external sound editor to reduce the level of the audio-file [of the menu]; and then use the quieter version in DVD-SP. Try installing Bias Peak LE, which should have come with DVD-SP.

ACCESS DATA BETWEEN DOMAINS

Good day!! Sorry if it isn't the right translation, but I try to get some codes for my patients in a web page of an Insurance company, but at the end of the process, after hitting the GENERATE CODE button, appears the messsage (ment for Windows, I suppose): "go to the section about HAVING ACCESS TO DATA ORIGIN BETWEEN DOMAINS", or so..
Hoy can I fix it???

See if you'd said it works with windows . . . try changing the user agent by using the Develop menu in Safari, pick some Windows agent, and see if that works. In Safari's preferences, check the show develop menu under advanced. If that doesn't work, then you'll need a windows computer to do this work or you'll need to talk to the people running the system to get them to fix the problem.

Fastest way to access data between String and char[]

Hi all,
I've been programming a small String generator and was curious about the best and fastest way to do so.
I've done it in two ways and now hope you can tell me if there is a "more java version" or fastest way between those two or if I'm totally wrong as some classe in the API already does that.
Here are the codes:
version 1:
        //describe the alphabet
     String alphabet = "abcdefghijklmnopqrstuvwxyz";
     //The "modifiable String"
     StringBuffer stringBuffer = new StringBuffer();
     //Just put the temporary int declaration outside the loop for performance reasons
     int generatedNumber;
     //Just do a "for" loop to get one letter and add it the String
     //Let's say we need a 8 letters word to be generated
     for (int i=0; i < 8; i++)
         generatedNumber = (int)(Math.random() * 26);
         stringBuffer.append(alphabet.charAt(generatedNumber));
     System.out.println(stringBuffer.toString());
     stringBuffer =null;version 2:
        //describe the alphabet
     char[] alphabetArray = {'a', 'b', 'c', 'd', 'e', 'f',
                    'g', 'h', 'i', 'j', 'k', 'l',
                    'm', 'n', 'o', 'p', 'q', 'r',
                    's', 't', 'u', 'v', 'w', 'x',
                    'y', 'z'}
     //The "modifiable String"
     StringBuffer stringBuffer = new StringBuffer();
     //Just put the temporary int declaration outside the loop for performance reasons
     int generatedNumber;
     //Just do a "for" loop to get one letter and add it the String
     //Let's say we need a 8 letters word to be generated
     for (int i=0; i < 8; i++)
         generatedNumber = (int)(Math.random() * 26);
         stringBuffer.append(alphabetArray[generatedNumber]);
     System.out.println(stringBuffer.toString());
     stringBuffer =null;Basically, the question is, what is the safest, fastest and more "to the rules" way to access a char in a sequence?
Thanks in advance.
Edited by: airchtit on Jan 22, 2008 6:02 AM

paul.miner wrote:
Better, use a char[] instead of a StringBuffer/StringBuilder, since you seem to know the size of the array in advance.
Although I imagine making "alphabet" a char[] has slightly less overhead than making it a String
1. It's a lot clearer to write it as a String.
2. You can just call toCharArray() on the String to get a char[], instead of writing out each char individually.
3. Or if you're going to be using a plain alphabet, just use (randomNumber + 'a')
And use Random.nextInt()Hello and thx for the answers,
I know I shouldn't put constants in my code, it was just a piece of code done in 1 minute to help a colleague.
Even if it was just a one minute piece of code, I was wondering about the performance problem on large scale calculating, I mean something like a 25 characters word for billions of customers but anyway, once again, the impact should be minimal.
By the way, I didn't know the Random Class (shame on me, I still don't know the whole API) and, I don't understand why I should be using this one more than the Random.Math which is static and thus take a few less memory and is easier to call.
Is it because of the repartition factor?
According to the API, the Random.Math gives (almost) a uniform distribution whether the Random.nextInt() gives a "more random" int.
I

DCOM access failure between forests

Similar Messages

Maybe you are looking for