DCR Server Down Error Message LMS 4.0.1

Hi,
I have a problem with my LMS 4.0.1! It was working fine till a couple of days ago. When I started it, all my equipment were missing and when i tried doing a Discovery Seach it launched a message saying that the DCR Server is Down.
I checked under Services in my Server and everything involving CiscoWorks is running. Ive Restarted the Deamon and still no luck. DCHP Service is disabled.
Have anyone had the same problem?? How can I fix it??
I have LMS 4.0.1 in a Windows 2008 R2 Server.
Ill be looking forward to a repply!
Thank you!!
Sincerely,
Dante

In the apache logs, I do see a Terminating on signal SIGTERM(15) and [warn] (OS 64)The specified network name is no longer available. : winnt_accept: Asynchronous AcceptEx failed.
1. Disable DEP (Windows Data Exectution Protection)
2. Disable SSL if in use, stop LMS Daemon Manager then
going to CSCOpx/MDC/Apache directory. Run the command from the CLI "CSCOpx/bin/perl.exe CSCOpx/bin/Apache/Config
SSL.pl -disable".
3. Ensure that you have enough resources allocated for the server, I did notice that you did not meet the system requirement for the hard drive space according to CiscoWorks Install logs.
4. Run the hostname change script as well from "CSCOpx/bin/perl.exe CSCOpx/bin/hostnamechange.pl" and reboot the server after gracefully shutting down the LMS daemon manager.
5. Post the updated screenshot of the services and pdshow after you have done the above steps along with the CSCOpx/log/syslog.log and CSCOpx/bin/pdshow output again.

Similar Messages

Broken link in "Oracle9i Application Server Portal Error Messages"

Hi,
the following link to "Troubleshooting Issues in Oracle9iAS Portal Architecture and Performance"
http://portalstudio.oracle.com/servlet/page_pageid=478&_dad=ops&_schema=OPSTUDIO&
is bad in the document "Oracle9i Application Server Portal Error Messages" which can be found at http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/ERRORMESSAGESHTML/CH_902.HTM
Rgds
Sol

After installing the Oracle9i Application Server ,Oracle8i 1.7 Database,I visit the link"http://localhost" ,then click "Jsever (demo)". Then ,there appears "500 Internal Server err".
The log file:
mod_jserv.log
[24/01/2002 09:25:32:031] (EMERGENCY) ajp12: can not connect to host 127.0.0.1:8007
[24/01/2002 09:25:32:031] (EMERGENCY) ajp12: connection fail
[24/01/2002 09:25:32:031] (ERROR) an error returned handling request via protocol "ajpv12"
Please help me.Any help appreciated!

Issue with Dreamweaver - Server Busy error message

Hi,
Whenever i open Dreamweaver, i see "Server Busy" error message. I am unable to use the application due to this. Can you please help resolve this right away?
Regards,
Raghu

I am using Dreamweaver CC. This problem started after a recent update I think.
Operating system - Windows 8.1 Professional
Basic system config in case you need it - 8 GB RAM, 2 TB HDD, Intel i7
Regards,
Raghu
Date: Fri, 20 Dec 2013 11:18:44 -0800
From: [email protected]
To: [email protected]
Subject: Issue with Dreamweaver - Server Busy error message
    Re: Issue with Dreamweaver - Server Busy error message
    created by Nancy O. in Dreamweaver support forum - View the full discussion
Which ver and build # of DW?
Which operating System?
Do you use a testing server?
If so, which one and is it running?
   Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948026#5948026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948026#5948026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948026#5948026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to fix "server problem" error message when trying to use PhoneGap build service.

I have a site that is now optimized for mobile devices and want to use the PhoneGap Build service in Dreamweaver CS6 to make a native app. Unfortunately, I keep getting the "We seem to be having server problems." error message when I try to create a new project. I did notice that the configuration file was created at the site root. I've seen a few other similar threads on this, but no solution. I've checked on any firewall issues (none) and know that the PhoneGap server is not down. The problem is on my end.
Thanks,
Loren

Not an answer to the server problem, but I have posted the PhoneGap Build process here: http://forums.adobe.com/message/4669054#4669054. It might help anyone still having problems.

Cannot get mail, server unavailable error message n my Yahoo account only, but not on others

Although I have no problem getting hotmail and other yahoo account messages, my PRIMARY email account has been returning an error message "Cannot get mail, server unavailable". But my server is working just fine for everything else except my main yahoo account. Could anyone shed some light on this for me? Thank you all!!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

DCR server down or inaccessible, same on JRM server

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Vanlig tabell";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Hello
Got this error on win server 2003. It is a new installation of LMS 3.2. Tried to start it from CM >>Server>>admin>>processes but that did not help. Any suggestion will be appreciated.
pdshow logg is included.

Check in the CmfDbEngine.log and also the Windows Event Viewer.
What error messages do you get there?
Also, what changes if any were made to the startup type to the Services in Control Panel?

RIM Twitter for BlackBerry Internal Twitter server problem error message

I have had this issue previously, it went away and now it's back; and can I remember how I fixed it... no.
I have a Bold 9700 running 5.0.0.680 and Twitter for Blackberry 1.0.1.7
Since updating to 5.0.0.680 I have been unable to login to Twitter via RIM's Twitter application. I receive the error message "Internal Twitter server problem."
I have tried the following to resolve;
Multiple battery pulls - no change
Flash back to 5.0.0.586 - no change
Flash back to 5.0.0.442 - no change
After flashing I have performed a full security wipe of the device to be sure its clean.
I am able to use UberTwitter and other social networking applications without any issues.
My BlackBerry is controlled via my companies BES. The Server version is 5.0.1 and I can confirm that the Value-added application policy is installed and has 'Disable organizer data access for social networking applications' set to No and 'Disable RIM Value-Added Applications' set to No for the policy applied to my device.
I am also one of the Administrators of this server.
What I would like to know is how to solve this issue. A search of the internet revels a number of similar issues, but these where apparently down to an issue with Twitter not the software. As I am able to access Twitter with no issues via other clients and see no issues reported on the status feed from Twitter I have run out of ideas.
I have also fired up a number of the BB simulators on a development machine and have been able to access Twitter via a simulated BlackBerry without an issues; making me think this is either a BES, device, or carrier issue.
Any help would be appreciated.
Thanks
Mark

Hey Mark,
Welcome to the BlackBerry Support Community Forums.
Are you still having trouble connecting to Twitter for BlackBerry?
Since you're on a BES just to do process of elimination, I would suggest performing a reset to factory so that will remove the IT policy. Follow the instructions in this KB article: www.blackberry.com/btsc/KB18998
Then test out logging into Twitter, if successful then we know it is it policy related. If you still receive the same error, let me know.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

"Cannot Find Server" Constant Error Message

I've been having this problem for quite some time. I will attempt to connect to a website only to wait forever and then get a "Cannot find server" error message. It's not just with one site, it happens with many.
It's also random. Sometimes everything connects fine and fast, and then inexplicably I get "Cant' find server" for sites like Facebook, Amazon, even Apple. It can start working again for a few minutes and then in an instant I'm getting error messages again.
However, my email always works fine.
And this is NOT a Safari problem. I also get the same trouble when I switch to Firefox or Explorer. My ISP says it's an Airport / Mac issue since it all works fine if I direct connect to the laptop and because my email is also working.
In addition, when I'm having this problem, my iPhone also cannot connect to the WWW but can get email.
I've tried powercycling the modem and the airport numerous times. It's really becoming a pain.
Any thoughts?

Me too I tried everything. I am an Apple fan with 2 computers,3 iPods. I have no idea what the problem is. I had to re-run the disk each time to find the internet. Finally tried a Linksys Grouter worked first time-laptop anywhere in the house strong signal. I have had similar problems with an Airport Express-never got it to work-so tried the Extreme. I returned it-I didn't want to but I just could not get it to work.

SQL Server 2005 Error Message - when Right Clicking a DB Properties

Hi
We are running SQL Server 2005 SP03, we have x15 databases (excluding SBO-COMMON, RSP, Coresuite), all x15 databases have Maintenance Plans setup, tasks ticked:
- Shrink Database
- Clean Up History
- Back up Database (Full)
- Maintenance Clean-up task
These Maintenance Plans have been running for over 5 months now, we have recently changed our VMware Virtual Server over to a Hosted VMware Virtual Server, now when I right click on a certain database and select "Properties" I get the following error message with SQL Server:
Property Owner is not available for Database '[Turquoise_Moon_Live]'. This property may not exist for this object, or may not be retrievable due to insufficient access rights. (Microsoft.SqlServer.Smo)
Could the Maintenance Plan be preventing me to run the Properties against a relevant DB (I have tested this by restoring a DB that doe not have a Maintenance Plan and the Properties works, tested this on SBO-COMMON and it works as well)
Can anyone agree with me or let me know what else might be the issue as I have checked the Server Roles & the Users Credentials for SQL and all seems well.
Regards
Kurt Walters

Hi Gordon
This solution did not work, but I needed to delete the Maintenance Plans anyway to set it for 1 month instead of 2 Months. I am thinking as we have changed Domains, were the last one was IS Domain and the new one is Hosted Domain, the security issues are probably coming from this (as I am able to access the Properties of the IS Domain SQL Server even with the Maintenance Plans running).
Any thoughts on correcting this as we have changed Domains? (I have created a user as HOSTED\example, the old one was IS\example)
Regards
Kurt Walters

After updating Itunes...Itunes cannot connect to the server, get error message -3212

I upgraded to Itunes 11.1.0.126 yesterday....
Getting this message when I check for updates: "The Itunes update server could not be contacted. Please check your internet connection, or try again later."
Also, I get this error message, when trying to connect to the Itunes Store: "Itunes could not connect to the Itunes Store. An unknown error occurred. (-3212)"
I also upgraded my Iphone 4 to iOS 7 yesterday.
Wish I would have left well enough alone....Anybody else having these issues? Thankyou.

Seems to be working now....

Ping iTunes server returns error message

Help!! I have tried to ping the server following the instructions on the Tech Specs page (http://www.apple.com/itunes/podcasts/techspecs.html), but whenever I put the URL w/podcast id into my browser, I simply get an error message back from Apple and the XML file is not updated immediately.
Here's the URL I used:
https://phobos.apple.com/WebObjects/MZFinance.woa/wa/pingPodcast?id=108627247 where the id is my podcast (Harpeth Hall LIbrary). Am I missing something?
Here's the error message:
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'https://phobos.apple.com/WebObjects/MZFinance.wo...

scoutwert
The call was intended to be basically a one-way notification. No real return value per se other than the http 200 success header if your message is received. Having said that, it's certainly pretty gross looking if you ping in a browser. A bug has been filed against this behavior so that in the future you can get a more friendly assurance in a web browser that your ping went through. In the meantime you might consider just pinging on the command line like this:
curl -I https://phobos.apple.com/WebObjects/MZFinance.woa/wa/pingPodcast?id=108627247
If it was received by the iTMS server, you'll see:
HTTP/1.1 200 OK
in the output. That 200 means the ping was received not that it has run yet.
d

SQL Server 2000 Error Message

I got the below error message:
The description for Event ID ( 17055 ) in Source ( MSSQLSERVER ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display the messages from a remote computer. The following information
is part of the event: 18456, Login failed for user 'xxxxx_yyyyy'.
SQL Server version : Microsoft SQL Server 2000 - 8.00.2282 (Intel X86) Dec 30 2008 02:22:41 Copyright (c) 1988-2003 Microsoft Corporation Enterprise Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
Experts kindly suggest if you would have come across the same scenario.
Yours
Mrvsfly
MRVSFLY

Also how to track the source ip address for this login
AFAIK it's not possible to get the information from SQL Server; you could only try to capture the failed logins with SQL Server Profiler.
See thread Capture information for failed logins
Olaf Helper
[ Blog] [ Xing] [ MVP]

Sql Server 2014 - Error message: Failed to read BLOB column

Hi all,
Am experiencing this error in Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Enterprise Edition (Build 7601: Service Pack 1).
Error messages:
Message: Failed to read BLOB column
Stack:    at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
   at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String
strWhereClause, Boolean useTableLockHint, Int32 bcpFileFormatVersion)
   at Microsoft.SqlServer.Replication.Snapshot.SqlServer.BcpOutThreadProvider.DoWork(WorkItem workItem)
   at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
   at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper() (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Please can you assist me on this issue.

The error message states a communication link failure has occurred.
This is most likely a network related error and usually is transient.
Try to generate the snapshot again and see if the error still occurs. If the error still occurs, you will need to have a network admin check the links.
Brandon Williams (blog |
linkedin)

I want to activate my windows 2008R2 64bit server getting error message is invalid license key

i download the windows 2008R2 64bit media from microsoft site and install it after that try to activate my key but error message coming invalid license key. pls help me.

if you are using a key and download form same area of the license ports you may just have a corrupt down load you can try to download again, or if you burnt the disk try buring a new copy at a slower speed. otherwise you should call your Microsoft licensing
professional to make sure the order went through as expected and you are downloading the proper image.
I don't think you can buy a 2008 r2 license anymore so I also assume you purchased 2012 r2 licensing and are you using a 2008 r2 key? the 2012 r2 key will not work with downgraded OS you need to get the key that matches the os from the licensing portal.

Shutting down error message.

I have an Officejet Pro 8500. It has an error message that reads shutting down. Even when I unplug it and plug it back in, it still says shutting down. Please help.

Hi,
You might try this document that walks through a partial reset.
Partial Reset
There are additional steps besides unplugging and pluging back in. See if this helps.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

DCR Server Down Error Message LMS 4.0.1

Similar Messages

Maybe you are looking for