DE-BUGGER

Since installing Snow Leopard, every time I use internet via Safari, my console displays message that DE-BUGGER WAS CALLED!
I'm guessing that caps and exclamation point means there is a problem. I just now am having trouble connecting to some web pages. Are these related? Can and should I disable the DE-BUGGER?

Thank you. According to the chat on the Mozilla.zine site you referred me to, this is something prompted by ADOBE. The new security update in Apple -10.6.1 - was supposed to fix an ADOBE problem but I guess it did not address this one. Safari and Mozilla Firefox appear to be the same in getting these message from ADOBE.

Similar Messages

  • File.renameTo() bugg? Leaves the file open

    I came across the strangest behaviour of File.renameTo() for the following steps:
    1. Rename a file - successful
    2. Rename the same file again - will fail. Also delete will fail.
    -------- some code ----------
    File file=new File("F1");//nonexistent file
    //write some to the file - just to make the file to be created
    RandomAccessFile rFile=new RandomAccessFile(file,"rw");
    rFile.writeBytes("Hello");
    rFile.close();
    //A successful rename
    boolean renamed=file.renameTo(new File("F2"));
    System.out.println("renamed="+renamed);
    //This is commented code for now
    //rFile=new RandomAccessFile(file,"rw");
    //rFile.close();
    //This rename fails!
    renamed=file.renameTo(new File("F3"));
    System.out.println("renamed again="+renamed);
    As it seems File.renameTo() sets the file to open, since neither renameTo or delete will work after a renameTo.
    BUT, if I uncomment the commented code, it will work again! I just open a dummy RandomAccessFile (FileInputStream would work as well I guess) and then close it, and somehow the file is set to closed again, and the second renameTo() will work.
    Is this a bugg in File.renameTo()? I run on windows XP and have java 1.4.1_02-b06. I couldn't find any comment about this in the Bug Database.
    Gil

    Aha! so the reason why the opening of the dummy RandomAccessFile did it in my previous code, was becase it created the old File "F1" again that could be renamed again. So the correct code should instead be:
    -------- some code ----------
    File file=new File("F1");//nonexistent file
    //write some to the file - just to make the file to be created
    RandomAccessFile rFile=new RandomAccessFile(file,"rw");
    rFile.writeBytes("Hello");
    rFile.close();
    //A successful rename
    File file2=new File("F2");
    boolean renamed=file.renameTo(file2);
    System.out.println("renamed="+renamed);
    //Now this rename also succeeds!
    renamed=file2.renameTo(new File("F3"));//do rename on file2!
    System.out.println("renamed again="+renamed);
    Gil

  • Set up communicator bugg??? Nokia E5-00

    When I click with the right button (contacts) then go to the right I can see : Set up communicator and one tab more I see again "set up communicator"(but with no search like the first one). 
    Am I the only one where it is like that or is this another bug? 

    I purchased this E5 yesterday evening..configured mail for exchange..n now i see an additional option of set up communicator on the home screen..whats painful is all the contacts i sync from m previous phone to this E5 seem to erased.
     I bought E75 in nov 2009..tha phone gave me nightmares..but after lot of convincing from other I took E75 mis hap just one stray case...
    REALISING NOW AFTER THIS EXPERIENCE OF SET UP COMMUNICATOR BUGG JUST THE NEXT DAY OF PURCHASE THAT NOKIA PHONE SHOULD BE STRICTLY AVOIDED.
    Trust some one in Nokia reads this..n finds me a solution..otherwise i am going to take it up LEGA
    eggboy1945 wrote:
    I purchased my E5 in December in the UK and it has all the faults reported in recent postings and I would advise against anyone purchasing an E5 THEY SHOULD BE RECALLED.I used a N95 for years without any problems then bought this load of rubbish,good job I kept my N95.THE E5 SUCKS!
    L way now!!!

  • Ipad bug , VIDEO BUGGER , je ne peux plus rien faire, je ne peux plus fermer mon ipad. RIEN, HELP

    Bonjour, j'écoutais un vidéo et mon ipad à bugger. maintennt il clignote et je ne peux plus le fermer et si je clique sur le bouton principal ca ne change rien. j'ai essayer de le brancher et debrancher d'une sources d'énergie. HELP plus rien ne fonctionne.

    Bienvenue dans la communauté Apple.
    Vous pouvez essayer un arrêt forcé pour commencer, maintenez enfoncé le bouton en haut et à domicile ainsi jusqu'à ce que l'appareil s'éteint, puis redémarrez-le.

  • I bought Mountain LIon but no dmg is downloaded. I can see the invoice from Apple but not the OS I supposed to receive. Is it a bugg?? I have a mac book air. Thanks

    xI bought Mountain LIon but no dmg is downloaded. I can see the invoice from Apple but not the OS I supposed to receive. Is it a bugg?? I have a mac book air. Thanks

    Thanks for the reply.
    However the trick is that it cannot download at all.I m asked to download the application. Then I put my Apple ID, then it start to download but just 1s... Then ....Nothing. No application, no error message... Just a nice invoice....

  • ORACLE 10g on Windows : Big bugg

    Hi,
    it's not the first time, I read errors about installing 10g on Windows.
    This version is not stable.
    You have to skip DBCA and try to create it manually.
    It's very strange, no problem on UNIX/Linux and a full of errors for Windows.
    They hurry up to purpose this version, but it's a big mistake. Some of people can have unix or linux servers, but it's easier to make tests on Windows plattform.
    When will we get the GOOD version.
    ThX.

    It is recommendable to install the software first and after the database, however I did get any error doing it creating the database or not at installation time ( In Windows ).
    It is very important that you have at least 256MB in RAM in order to work with Oracle10g at a minimun conditions.
    Joel Pérez
    http://otn.oracle.com/experts

  • Facebook log in bugg

    Does somebody notice that if you use skype and an open tab facebook in Safari, when you wake up you have to re-log in in safari for a facebook refresh, or what else. I've noticed that mark on log automaticli is not working when skype is signed in. When i close skype and put my mac to sleep and then wake up i can refresh without re-log in. Can sameone of the smartest heads in our favourite trademark do something and fix this glitch(bug).

    this forum is made up of users just like you, who have no power to fix any bugs/glitches anymore than you do.

  • Problem installing OS9 after OSX bugger up

    Hey folks.
    Ive got a G4 Tower that my brother got from his work. He wanted me to stick OSX on it which i did not realising you need to install the firmware update first. So ive tried to go reinstall OS9 on the drive in order to do this...herein lies the problem:
    I havent seen my genuine OS9 discs for yonks, i have no idea where they are (plus they are the discs that came with my 400MHz iMac so they might not work anyhoo) so i opted for getting a copy through...questionable means. It all works fine, ive burnt the contents to a disc and can run the installer with no problems.
    I connected the tower to my iBook using target mode and wiped the hard drive remotely using Disk Utility. There was no way i could use the drive otherwise, it just came up with the OSX boot screen then eventually the no entry sign. After wiping and reformatting the drive it comes up fine in target mode. I run the installer and it puts OS9 on the target disk with no problems, the installer finishes and everything. I went back into the the installer straight afterwards to confirm it worked and it said the version i had intalled was Z2-9.0.4 or something to that effect. When i restart the tower it comes up with the flashing folder that normally comes up when there is a system folder problem. I can access all the files on the drive when in target mode, but i cant boot up from the drive even though the OS installed with no problems.
    Can anyone help with this problem, i know it was unethical to use a pirated copy but where else am i going to get a copy of OS9 these days?!

    right update time:
    i downloaded both of those updates (9.1/9.2.1) Went through the whole installation prcoess again starting with 9.0.4. That installed ok, straight afterwards i installed the 9.1 update. That had a small complaint about not being able to access a 'About Apple Script' file. It seemed like a non-core file so i just told it to carry on, which it did and it said the installer finished properly with no problems, and after checking in the installer app it said it had Z2-9.1 installed. Then i did the 9.2 update. Again it went smoothly, it had one hicup where it said something about a drive file not being right '-- Mac Help Guide.img' or something along those lines, again it seems like an unimportant file so i tell it to carry on. It comes up with a box saying something cannot be installed, i tell it to skip and it carries on. Eventually it finishes the installation, saying some software has not been installed, but it finishes none the less. Afterwards i go back into the installer and check to make sure it has worked and it says it has Z1-9.2.1 installed and when i went to install it again to make sure it asks if i want to remove/overwrite it or add more to it.
    From this surely one would assertain that 9.2.1 has been installed on the machine. I went into the machine's system folder afterwards, looked up all the important files such as System, and it says that it is version Z1-9.2.1. HOWEVER when i go to restart the machine it comes up with the flashing question mark again. I dont get it! From accessing the machine through TD mode it says that it has 9.2.1 installed, if thats the case why isnt it loading the system folder properly?!

  • Will the new itunes bugger up my iphone.

    i have the iphone that has the 1.1.1 and am using my own sim card.
    also have the itunes upgrade - which is 7.5.
    will this latest itunes upgrade stuff up the phone or is it ok to connect it.
    am charging offline - via a power socket but would like to d/load my podcasts but am not too sure if the upgrade for itunes will brick my phone.
    anybody ? ? ?

    Moi
    user asked....
    will this latest itunes upgrade stuff up the phone or is it ok to connect it.
    Answer = No it won't
    The iPhone upgrade to 1.1.2 is another question
    Message was edited by: gaz_chops

  • Lightroom 3 issue, a bugg?

    I work with ligtroom 3. When i change something in my mapstructure of the libary, for instance i add a map, the entire mapstructure above opens.  Its really annoying!  is this dissolvable?

    Can you post a screenshot of the following 2 tabs in Win7 color management:
    (select your display under "Device" first)
    Beat
    Message was edited by: b_gossweiler

  • Creative's servers bugge

    trying to get hold of "ZenMicroP4S_PCFW_L6_2_2_02.exe" to upgrade my firmware (have to because for some reason my micro is no longer detected with the creative software).
    Its only 2.3mb but the max constant download speed i can get hovers around 4k, and about half way through the download the transfer just sto
    ps.
    Are there any mirrors for this file?

    Googled for it and found it here. Still quite slow but better than from Creative.
    Remember to A/V it just in case.
    PB

  • The App Store is Buggie

    I just got a update prompt about a update for a app and it's the same version, plus a few apps on the app store has a mysteries blank right side, please fix this

    No need for you to be rude... just ignore the topic if you don't want to be helpful.  The app store IS acting up right now.  Maybe the user wanted to see if other people were experiencing the same problem.  Or maybe s/he actually needed to be directed to support (I don't have that info, so if someone else does and could post it, it would be helpful).  Either way, your snotty comment is unnecessary.

  • HDD Crash.  Bugger

    I have a 15" Powerbook G4 1.5Ghz that has had a nasty hard drive crash and the drive will not appear even in disk utility.
    I have tried DiskWarrior but the drive will not even appear to format or administer at all.
    Disk Utility is useless and when I tried to Erase the drive to reinstall Leopard it failed to Erase at the partition phase. It is after that that it will not appear even in System Profiler.
    I am expecting to replace the drive as I know it is knackered, but would like some advice on damage limitation - or any ideas how to get the drive to appear in order to format it and try again.
    Lucky enough my ext drive has Time Machine turned on and I have not lost anything I can't duplicate from my Macbook Pro.
    Any ideas?
    Jim

    Hi, jamesaberry. If you "know the drive is knackered" and you expect to replace it, you obviously aren't going to entrust any significant data to it. And if all you're going to do, should you finally get the drive to appear, is reformat it, why fool with it at all? Take it out, whack it a few times with a sledgehammer to safeguard the data on it from prying eyes, and throw it away.

  • Sound Buggs or Problems

    Hi. I have an Iphone 5. I dont know if this matters but 2 days ago i upgraded to iOS 6.1. Yesterday night i had a phonecall and i could hear regularly. Then on the next phone call a few hours later I couldn't hear a thing. Like the voice from the other was distant. That keeps happening since yesterday night. In every phone call. What can I do to fix this? Can it be iOS 6.1 fault?

    Hmm, I havent had any issues with my movie/tv collection and a pair of very cheap headphones, sound seems around the same as my old onboard ac97, just a bit more "clear".
    Did you try with other sound-sources, like winamp, etc ?
    Reason I ask, is that if you play movies in windows some audi-codecs give really low sound (fx. I have had quite a few movies where the bagground music would be loud, but I could hardly hear the voices) especially the ac3-audio codec can cause this, pretty sure theres a utillity floaing about on the net, that allows for tweaking sound volumes in ac3-based sounds.
    Havent had any beeps either...

  • Lock ups in BIOS

    Hi I'm using the 7.8 BIOS and accessing the "PC Health" Page in the BIOS locks my system. This happened before and a later BIOS cured it but it's back again (sorry for the vagueness can't remember exactly when). Has anyone else had this issue?
    Bugger forgot to update SIG I have a Twinx1024 4000 mem kit @ 200FSb in there aswell

    Cheers for the reply Wonkaboy
    my first post illustrates the hazards of of inputting your specs into your sig, they will always prove wrong after about a week. I had two drives but I got fed up with the cabling so I bought a combo instead. the cpu heat thing is a good idea though,  just replaced the cpu so I might take the heatsink off and recheck all the gunk and that.
    oh yeah the cpu fan is direct to the psu

Maybe you are looking for