Deactivate SU01 password for a particular system

Hi There,
I need to deactivate password for some target systems of a user (SU01). This can be done with BDC for SU01 transaction but its static as itu2019s not possible to select a particular target system if there are multiple systems assigned. I need a program where I can specify the user & target systems for which I want to deactivate the password.
Is there any FM which performs this task?
Thanks in advacne,
Ram.

goto options->security->saved passwords.
in the filter field, type any part of the website url to find it, then click to delete it.

Similar Messages

How do I reverse my decision to have firefox remember and display my username and password for a particular website?

When I go to a website that requires user-name & password I enter them and then Firefox pops up "do you want firefox to remember your user-name & password for this site".
I made the mistake of clicking "yes" and now when I go there the site comes us with both. I have several user names & passwords for some sites and now I don't want firefox to remember them. So, how do I reverse my decision to have firefox remember and display my user name and password for a particular website?

Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
* http://kb.mozillazine.org/Deleting_autocomplete_entries
* [[Remembering passwords]]

Had to reset, now my apple tv will not accept by password for my wireless system, what do I do?

Apple TV will not accept my password for my TV, had to restart, what do I do?

Power cycle the router and try again.
If the issue persists, temporarily turn off security on the router and connect. Then turn security back on and connect, it should accept the password this time.

How do I retrieve a password for a particular podcast?

When I go to sync my phone or open iTunes, I get a meassage from one of the podcast sources that says it needs me to log in, and I have no idea what my username or password was at the time I signed up. There's no link to retrieve the info. Help, please!

A persistent, flashing amber light indicates that any of the several potential conditions may require your attention:
The base station has not yet been configured because it is new, or the reset switch has been set.
You have selected a security configuration that is not recommended.
One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.
(ref: http://docs.info.apple.com/article.html?artnum=305101)
If you run the AirPort Utility, it will show an amber circle on the summary page next to the area(s) causing the problem. Click on this amber circle and it should provide an explanation.

"Deactivate password" for standard authentication

Hi Guys,
I'm trying to get more information about the "Deactivate password" option on SU01, but the only information I get says that it can be done when we are using an external authentication method like X.509.
So, my question is :
If I have an ABAP instance using standard authentication method (without an external authentication method), is it a good practice to lock users and deactivate their passowrd to increase the security? Does it make sense?
Thanks in advance,
Itamar

Thank you Tim, for your prompt answer.
With your comments I think it is a good practice to deactivate the password for locked users which will not have to access the system again.
Regards,
Itamar
Edited by: Itamar S Marioto on Aug 9, 2011 7:42 PM

Need Administartor Password for - System Disable Key: is 62187718

Need Administartor Password for CQ62 215DX - System Disable Key: is 62187718

Hi, Use the below code to reset 73885338 Or generate one from the below link http://bios-pw.org/ 1. Use the unlock code you generated to enter the BIOS
2. Disable all passwords that are enabled in the BIOS's security menu.
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.

What is CPI-C and how to find the username and password for a 4.7c install

Dear Friends,
Please tell me what is a CPI-C username is ??
When do we use it?
And how/from where could I find the CPI-C user name and password of a particular system(4.7c)?
Please give me a detail knowledge.
waiting for replies ....
thx,
jeevan

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Deactivating the password for the given user

Hi All,
I have used the FM SUSR_ZBV_USER_SEND for deactivating the user passwords . passed bapi method PWDINIT
the report which has been developed will deactivate the password for a given user in particluar sub system.
suppose if i am executing the report in ABC system and deactivated the password of a given user for XYZ system its working fine. However if i am trying the deactivate the password of a user in ABC system . its not getting deactivated.
please let me know what has to be done in order to deactivate the password if i am using the same systems.
Thanks & Regards.
Preeth.

Jeremy,
The default password for the Portal user in the same password as ias_admin. This would be defined at install time through the Oracle Universal Installer. However, if you're asking about identifying the Portal schema password in the database, you can login to the Directory Manager(assuming you're using Windows)and login as
cn=orcladmin
password: (ias_admin password)
Click on (entry management)=>(cn=OracleContext)=>(cn=Products)=>(cn=IAS)=>cn=Infrastructure Databases => ReferenceName=sid:host=>ResourceName=Portal. Click on the entry and look at the orclpasswordattribute.
Incidentally, you can also find the orasso password by checking the ResourceName=orasso.
Note:198800.1 on metalink would be a good resource to follow.
Thanks,
Sudi Narasimhan
Oracle9iAS Portal Partner Management
What is the default password for the Portal User in 9i AS Release 2? I'm assuming this is the equivalent user to the Portal30 user in 3.0.9?
Thanks.

I was asked if I wanted to store a password and said no. I would like to change my mind and store password for that site. How can I get Firefox to ask again?

Brand-new MacBook Pro running Lion OS (10.7.1)

Hi cor-el -
Thanks for directing me to the Mozilla help pages for passwords. I had already done that to no avail.
I had deleted the particular saved password from my Saved Passwords list (because it didn't include my username), and I now want to add it, but FF won't offer a second chance to save.
The password is not in my Saved Passwords list nor is it listed in the Exceptions.
(I'm running on a brand-new MacBookPro with OS Lion 10.7.1.)
I found the following and tried it, but it didn't work:
• delete site from bookmarks
• clear history when FF closes in prefs
• quit FF
• restart FF
• uncheck clear history when FF closes in prefs
I still can't seem to make FF offer me a second chance to save a password for a particular site.
Any help is appreciated.

Single hierarchy for multiple target systems

Hi,
I have a version named "Account" with a hierarchy named as "Acc2013".
the hierarchy "Acc2013" is same across Oracle EBS, Oracle Fusion GL, and HFM.
how can i assign multiple node types to the same hierarchy so that i just need to maintain one hierarchy (this case account hierarchy) and select the properties pertaining to each target system?
i.e. i select the Oracle GL from the drop down and give the details for the Oracle GL then i select the HFM category from the drop down and provide the HFM related properties.
the reason why i am asking is, if i dont give the node type, all the unnecessary properties are showing up for other type of hierarchies. for e.g. there is another hierarhcy named cost center there its showing the account related properties.
to summarize, how i can utilize a single hierarchy to be used for different target systems? Appreciate your help. do i need to create different version and hierarchy for different types of target systems?

I'm late to respond to this, but I always preach to customers that it is critical for DRM to act as an enterprise view. This isn't a "System A" hierarchy, or a "System B" hierarchy, but rather it's an asset that is shared by both systems, and therefore attributes for both systems are valid. Since node types provide the ability to hide properties, many interesting options present themselves, not all of which lead to a good outcome in the longer term. If a user doesn't ever want to see properties for a particular system, it would be better to just remove their access to that property category in many cases. (They may already have read only access but they object to "being bothered" with seeing those properties.)
I've seen many DRM implementations head down the other path and end up with duplicate maintenance requirements, configuration challenges, or even having to do major reengineering efforts to transition DRM from a Finance department tool into an enterprise use case feeding a data warehouse. A current customer of mine used a scheme where a checkbox on each property category would make the properties disappear if unchecked...this worked great with a handful of node types, but unfortunately the number of node types needed to support all of these property category combinations was bound by factorial math principles. Consequently the maintenance for this solution went from unweildy to unmanageable as more "non-HFM" data was added to DRM.
DRM implementations should be guided by governance principles and maintenance business rules, rather than than how things appear in DRM. It's how they appear when published that is of primary importance. I think the new features related to Data Governance will help greatly in this regard. Users that are overwhelmed by the DRM UI can easily be limited to the attributes that are relevant to their specific workflows, and only the "Power users" will see everything.

How to make password for macbook

how to make password for macbook

Go to System Preferences - Users and Groups, select your user, and click Change Password. If you currently have a blank password, type nothing in the "Current Password" box.
Matt

Need To Recover Admin Password For UC320

Hello,
We need asistance with with recovering the admin password for a UC320W system that we have in production at a client.
Unfortunately, there are no backups being done on the system.
Is there anyway that Cisco can help in recovering this password?
Thanks.

Please open a case with the SBSC for assistance with password recovery. Please have the WAN MAC address handy (found on the label on the bottom of the unit) when you open the case as we will need that. We will then need to have LAN side access to the UC320.
Thanks,
Florence.

Deactivate Warehouse Managment for Plant

Dear All,
Please only provide me setting for how to deactivate Warehouse Managment for a Particular Plant
Regards
Amey

Remove the assignment at this node
go to SPRO > Enterprise structure > Assignment > Logistic Execution > Assign Warehouse to plant / storage location
Make stock to Zero before make this change

I have set my password manager to remember passwords for sites. I have not entered any exceptions. However, it never remenbers any, nor does it prompt me to remember. I cannot use this feature because it is never visible to me. Any suggestions?

I never see any prompts which ask me if I wish to have Firefox remember my password for a particular site. Therefore I can never store any.

* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"

How to deactivate the "left top corner SAP menu" for a particular screen

Hello Friends..
We have a requirement to implement a "Non Disclosure Agreement(NDA)" for one of our SAP systems. NDA screen will have 2 buttons, "I agree" and "I disagree" which pops up when you log in to the system(after filling up our user id and password and hit enter). If we click on "I agree", it will allow you to continue with the log in and takes you to sap easy access screen. If we click on "I disagree", then session will be terminated.
But, the NDA window which is being popped up is also a SAP screen which has SAP menu on top left corner. Without clicking on "I agree" or "I disagree" and if we try to select "Create session" option in SAP menu on top left corner, then it is taking us inside SAP(sap easy access screen) by bypassing the buttons.
Request your help on how to deactivate the "left top corner SAP menu" for this particular NDA screen. (SAP menu to be available with other screens and it should not be available just for the window which is being popped up after log in and before SAP easy access)
Many Thanks in advance..
Vinay

Hi Vinay,
Try this if it works -
in your first screen for the NDA screen, on the memnu bar select - EXTRAS - SETTINGS - Select the check box 'Do not display menu, only display favourites'.
on calling the next screen , disable this option in the PBO of the screen.
Try and let me know if it works.
Thanks & Regards, Swapnil Mishra

Deactivate SU01 password for a particular system

Similar Messages

Maybe you are looking for