Dead Lock occured while Sync index in oracle text

Hi All,
We are facing dead lock issue which syncing the oracle text index . The index is built on the local partitioned table and the sync index has the parameters below,
parallel - 4
memory - 20M
the error message is,
System error: Plsql job execution is failed with
error code -20000 and error message ORA-20000: Oracle Text error: DRG-50610:
internal error: drvdml.ParallelDML DRG-50857: oracle error in
drvdml.ParallelDML ORA-12801: error signaled in parallel query server P003,
instance xxxx.enterprisenet.org:xxxx (1) ORA-20000: Oracle Text error:
DRG-50857: oracle error in drepdump_dollarp_insert ORA-00060: deadlock detected
while waiting for resource ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.DRVPARX",
Thanks in advance.

How many occurrences of XYZ are there per XML document ?
If there are more than one, then obviously you cannot create such an index on it.
In this case, you'll need an XMLIndex, unstructured or structured, depending on the type of queries you want to run.
If there's only one occurrence, could you post a sample document and your db version?
Thanks.

Similar Messages

Dead Lock occurred while accessing a Table

Hi Experts,
Yesterday i came across to an error Dead Lock occurred while accessing a Table and provides a dump message as"SQL error in the database when accessing a table" while monitoring process chains.I dis manual load it went fine.Can any one give the permanent fix about this issue.
Thanks in advance,
Mahesh

Hi,
You might need basis help. Just check following thread
SQL Error in database when accessing a table
sql error in the database when accessing a table in BW Extracts
Thanks and regards

Dead lock error while updating data into cube

We have a scenario of daily truncate and upload of data into cube and volumes arrive @ 2 million per day.We have Parallel process setting (psa and data targets in parallel) in infopackage setting to speed up the data load process.This entire process runs thru process chain.
We are facing dead lock issue everyday.How to avoid this ?
In general dead lock occurs because of degenerated indexes if the volumes are very high. so my question is does deletion of Indexes of the cube everyday along with 'deletion of data target content' process help to avoiding dead lock ?
Also observed is updation of values into one infoobject is taking longer time approx 3 mins for each data packet.That infoobject is placed in dimension and defined it as line item as the volumes are very high for that specific object.
so this is over all scenario !!
two things :
1) will deletion of indexes and recreation help to avoid dead lock ?
2) any idea why the insertion into the infoobject is taking longer time (there is a direct read on sid table of that object while observed in sql statement).
Regards.

hello,
1) will deletion of indexes and recreation help to avoid dead lock ?
Ans:
To avoid this problem, we need to drop the indexes of the cube before uploading the data.and rebuild the indexes...
Also,
just find out in SM12 which is the process which is causing lock.... Delete that.
find out the process in SM66 which is running for a very long time.Stop this process.
Check the transaction SM50 for the number of processes available in the system. If they are not adequate, you have to increase them with the help of basis team
2) any idea why the insertion into the infoobject is taking longer time (there is a direct read on sid table of that object while observed in sql statement).
Ans:
Lie item dimension is one of the ways to improve data load as well as query performance by eliminationg the need for dimensin table. So while loading/reading, one less table to deal with..
Check in the transformation mapping of that chs, it any rouitne/formula is written.If so, this can lead to more time for processing that IO.
Storing mass data in InfoCubes at document level is generally not recommended because when data is loaded, a huge SID table is created for the document number line-item dimension.
check if your IO is similar to doc no...
Regards,
Dhanya

MS Project 2010 - An unknown error has occurred while syncing to a SharePoint site.

Dear all,
I encountered a generic error when using MS Project 2010 to sync with our SharePoint 2013 on-premise. I want to clarify is it default behaviour or a bug.
When I start MS Project 2010 professional from new -> sync to Sharepoint by type in URL and the list name. I can create a new project list successfully. I have verified the tasks are sync to the Sharepoint and I am able to see them listed on site.
After sync, I save the Ms Project document to local computer. Named test1.mpp. Then I close MS Project. Then open test1.mpp again and then sync immediately. This time an error show up:
An unknown error has occurred while syncing to a SharePoint site. Ensure the SharePoint site is running and try again
Since I didn't add anything to the mpp file, I believe it doesn't contain any invalid data blocking the sync. What would be the problem? Thanks.
Mark

No, I didn't. I just fill the site path like:
http://sharepoint.com/sites/Project/
and then the List field:
ProjectA
I want to clarify the sequence should be:
After sync, I save the Ms Project document to local computer. Named test1.mpp. Then I close MS Project. Then open test1.mpp again and then sync immediately. Then error occur.

IWeb Publish Error - A lock occurred while publishing to MobileMe

iWeb Publish Error - A lock occurred while publishing to MobileMe. Try publishing again later.
I've tried all articles so far on apple support site. Tried on new OS user and publishing to folder and publishing a test page. I still get an error. Publishing to folder works fine, its just when I publish to MobileMe. Also tried different network and restarting computer etc.
Help me. Thanks.

If you are logged in OK maybe you should look at your Keychain.
Finer/Go/Utilities/Keychain Access.app.
Try "Keychain First Aid" from the "Keychain Access" drop down menu.

Huge Databases to be indexed with Oracle Text?

Is there anybody with experience with Oracle Databases with several TB and an fulltext index with Oracle Text? Are there any success stories by oracle?

Oracle Text, data load by partitation, async refresh index.
Hi Gurus,
Here I got a question,
Serniro:
A table with 2 partitions, text index created.
When I load data into 1st partition, performance good.
Sync partion text index, performance good.
Then I load data into 2nd partition, it's so slow.
My question is,
How to disable/offline 2nd partition text index?
Sync it after I loaded 2nd partition data.

Error occured while syncing

Hi all,
I am trying to sync my iPhone 4 with my mac and every time I try to sync it on iTunes the message " ...error occurred while sending data from the iPhone" I have no idea what to do about this problem and I can not find anything on any of the discussions. Please post back any suggestions.

i have tried this a couple of times already and it also would show " error... (-5000) , but it says the same thing only difference is the error number. Please help!!!

Getting error while importing schema with ORACLE TEXT

IMP-00003: ORACLE error 20000 encountered
ORA-20000: Oracle Text error:
DRG-52204: error while registering index
DRG-10507: duplicate index name: WORKORDER_Q, owner: SYS
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.DRIIMP", line 115
ORA-06512: at line 2
IMP-00088: Problem importing metadata for index WORKORDER_Q. Index creation will be skipped
Database version - Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Os version - Linux nlxs1012.slb.atosorigin-asp.com 2.6.18-308.el5 #1 SMP Fri Jan 27 17:17:51 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
We have take export of schema from production db now importing data to qa environment..
In import facing above error..

I am importing objects from P20_MAXIMO to Q25_MAXIMO to another database..
Below is import par file..
USERID='/ as sysdba'
FILE=exp_P20_MAXIMO_C2364781.dmp
LOG=imp_P20_MAXIMO__Q25_MAXIMO_C2364781_1.log
FROMUSER=P20_MAXIMO
TOUSER=Q25_MAXIMO
buffer=1000000
feedback=100000
Export parfile
userid='/ as sysdba'
owner=P20_MAXIMO
FILE=exp_P20_MAXIMO_C2364781.dmp
LOG=exp_P20_MAXIMO_C2364781.log
buffer=10000000
feedback=100000
statistics=none

Structure of Indexes in oracle Text

Hi,
I like to know which Indextyp ist using Oracle Text.
Is it B-Tree Indexes? Or which structure does oracle use to index the dokuments?
I know there are some differences between ctxcat and context.
Can anyone help?
regars,
Arsineh

context is an inverted index structure. ctxcat is based on a b-tree.

Does Index in Oracle Text lock local files?

Hi, I am planing to implement content search using file datastore. Let me explain how the whole search going to work, Users are going to upload the file, I am going to store the information about the file like filename, size, keywords, file path etc in Oracle table and I am going to store the original file in a different server. When indexing on filepath, does index lock local files on the Operating system? Does it affect the live data? Please I need answers to this ASAP. Can anyone help?
Thanks,
Meena

Hi,
there are differences between the Engine of Text indexing, in 10G it was Verity, in 11G (from version 11.1.0.7) it is the Stellent technology, but I do not hope this is it.
Maybe you could make a dump of the creation of the indexes in both 10g and 11g. This can be done through:
select ctxsys.ctx_report.create_index_script('KSK_FILE_TABLE_CTX1') from dual;
This wil give you a create script with all the parameters. Maybe there is a different in your default settings for text indexes, possible the FILTER.
Herald ten Dam
Superconsult.nl

Error occurred while sync torch 9810 with Outlook 7 Calendar (BB desktop version 7.1 bundle 1997)

program occured at line 131 in error cpp
19:34:18.762 Logging Verbosity Set To '2' - Logging Enabled
19:34:18.764 SyncAPI logging for product
19:34:18.766 Sync started at 12/29/2013 7:34:18 PM (12/30/2013 12:34:18 AM UTC)
19:34:18.766 SDK Version is 7.1
19:34:18.768 Operating System: Microsoft Windows NT 6.1.7601 Service Pack 1
19:57:04.701 RIM::: Translator Id = 3, MSOl
19:57:04.701 RIM::: Translator Id = 5, WinVista
19:57:16.510 MSOL : MSOLDatasourceProvider : Enter GetOutlookProfiles
19:57:24.155 SyncObject:tartSync
19:57:24.156 Synchronization Thread Running
19:57:24.157 Sync Engine Starting
19:57:25.829 Starting Loading Contracts
19:57:25.829 Ending Loading Contracts
19:57:25.829 Starting Translator Verification
19:57:25.829 Ending Translator Verification
19:57:25.829 Starting App Validation
19:57:25.844 Ending App Validation
19:57:25.844 Starting Sync Status Checks
19:57:25.847 Begin Sync
19:57:25.852 Engine working - message event complete for messageId 15006 Getting status information from BlackBerry Calendar
19:57:25.855 Engine working - message event complete for messageId 15008 Loading field information from 'BlackBerry Calendar' application
19:57:25.861 Engine working - message event complete for messageId 13000
19:57:25.864 Engine working - message event complete for messageId 15008 Loading field information from 'Outlook Calendar' application
19:57:25.953 Engine working - message event complete for messageId 13000
19:57:27.632
19:57:27.633 Performing Full Sync of 'Calendar'. Sync Status before performing synchronization:
19:57:28.086 Engine working - message event complete for messageId 15003 Read 1 records
19:57:28.369 End Sync with Error 4
19:57:28.369 Ending Sync Status Checks
19:57:28.371 Engine working - message event complete for messageId 13000
19:57:29.038 Sync Engine Completed (14005)
19:57:29.038 Sync completed at 07:57:29 PM on 12/29/13
19:57:29.038 Sync completed at 07:57:29 PM on 12/29/13

Hi and Welcome to the Community!
denise53 wrote:
program occured at line 131 in error cpp
Here is a KB that discusses that error:
KB32032 Recurring appointments of a specific pattern cause the sync to fail with an error message in BlackBerry Desktop Software
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Ipod touch locked up while syncing tried to reset it didn't work

the screen shows the itunes logo (music) and the usb connector. Tried resetting by holding down the on/off button at top
cornedr and home button below square and it didn't work. still see same graphics? Help!!

You have to connect your iPod to iTunes and configure it.

Does dropping bitmap index and creation of b- index cause any dead locks

Does dropping a bitmap index on table which is being used continuously for DML operations and creation of b- index cause any dead locks on a table
in oracle 10g database
( 10.1.0.4.0 - 64bi).
we have seen alert log file which has dead lock occurrence.. would index change/re-creation resulted dead lock or some other reason?
Could you please give us info or help us on this.. thanks in advance..

Bitmap indexes can be the cause of deadlocks on busy systems.
Dropping indexes may cause some locking.
Creating indexes may cause some locking.
You haven't given any traces or scripts or lock information, so difficult to say which one (if any) was the cause of your deadlocks.
It would be better to do this activity when the system is not busy.

Restore using TSPITR Results Dead lock error

This is the step is followed but i am getting deadlock error .please give your valuable suggestion .
Product Used:oracle 11g in linux environmnet
1)Before taking backup get SCN number for restore.
Command applied: Select current_scn from v$database;
2)running Full backup of database
Command applied:
configure controlfile autobackup on;
backup database;
CROSSCHECK BACKUP;
exit;
3)Running level 0 incremental backup
Command applied:
BACKUP AS COMPRESSED BACKUPSET INCREMENTAL LEVEL 0 TAG ='WEEKLY' TABLESPACE TEST;
exit;
3) Running level 1 incremental backup
Command applied:
BACKUP AS COMPRESSED BACKUPSET INCREMENTAL LEVEL 1 TAG ='DAILY' TABLESPACE TEST;
4)Before Restore(TSPITR) following procedure are applied under sysdba privilege
Command applied:
SQL 'exec dbms_backup_restore.manageauxinstance ('TSPITR',1)';
5)TSPITR Restore command
Command applied:
run
SQL 'ALTER TABLESPACE TEST OFFLINE'
RECOVER TABLESPACE TEST UNTIL SCN 1791053 AUXILIARY DESTINATION '/opt/oracle/base/flash_recovery_area';
SQL 'ALTER TABLESPACE TEST ONLINE';
and i tried with this option also(the same error i was getting)
Command applied:
run
SQL 'ALTER TABLESPACE TEST OFFLINE';
SET UNTIL SCN 1912813;
RESTORE TABLESPACE TEST ;
RECOVER TABLESPACE TEST UNTIL SCN 1912813 AUXILIARY DESTINATION '/opt/oracle/base/flash_recovery_area';
SQL 'ALTER TABLESPACE TEST ONLINE';
The follwing error i get for above mentioned restore command
Recovery Manager: Release 11.2.0.1.0 - Production on Tue Aug 17 18:11:18 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: NEW10 (DBID=2860680927)
RMAN> run
2> {
3> SQL 'ALTER TABLESPACE TEST OFFLINE';
4> RECOVER TABLESPACE TEST UNTIL SCN 1791053 AUXILIARY DESTINATION '/opt/oracle/base/flash_recovery_area';
5> SQL 'ALTER TABLESPACE TEST ONLINE';
6> }
7>
using target database control file instead of recovery catalog
sql statement: ALTER TABLESPACE TEST OFFLINE
Starting recover at 17-AUG-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=404 device type=DISK
RMAN-05026: WARNING: presuming following set of tablespaces applies to specified point-in-time
List of tablespaces expected to have UNDO segments
Tablespace SYSTEM
Tablespace UNDOTBS1
Creating automatic instance, with SID='BkAq'
initialization parameters used for automatic instance:
db_name=NEW10
db_unique_name=BkAq_tspitr_NEW10
compatible=11.2.0.0.0
db_block_size=8192
db_files=200
sga_target=280M
processes=50
db_create_file_dest=/opt/oracle/base/flash_recovery_area
log_archive_dest_1='location=/opt/oracle/base/flash_recovery_area'
#No auxiliary parameter file used
starting up automatic instance NEW10
Oracle instance started
Total System Global Area 292933632 bytes
Fixed Size 1336092 bytes
Variable Size 100666596 bytes
Database Buffers 184549376 bytes
Redo Buffers 6381568 bytes
Automatic instance created
Running TRANSPORT_SET_CHECK on recovery set tablespaces
TRANSPORT_SET_CHECK completed successfully
contents of Memory Script:
# set requested point in time
set until scn 1791053;
# restore the controlfile
restore clone controlfile;
# mount the controlfile
sql clone 'alter database mount clone database';
# archive current online log
sql 'alter system archive log current';
# avoid unnecessary autobackups for structural changes during TSPITR
sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;';
executing Memory Script
executing command: SET until clause
Starting restore at 17-AUG-10
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=59 device type=DISK
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/autobackup/2010_08_17/o1_mf_s_727280767_66nmo8x7_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/autobackup/2010_08_17/o1_mf_s_727280767_66nmo8x7_.bkp tag=TAG20100817T142607
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/opt/oracle/base/flash_recovery_area/NEW10/controlfile/o1_mf_66o0wsh8_.ctl
Finished restore at 17-AUG-10
sql statement: alter database mount clone database
sql statement: alter system archive log current
sql statement: begin dbms_backup_restore.AutoBackupFlag(FALSE); end;
contents of Memory Script:
# set requested point in time
set until scn 1791053;
# set destinations for recovery set and auxiliary set datafiles
set newname for clone datafile 1 to new;
set newname for clone datafile 8 to new;
set newname for clone datafile 3 to new;
set newname for clone datafile 2 to new;
set newname for clone datafile 9 to new;
set newname for clone tempfile 1 to new;
set newname for datafile 7 to
"/opt/oracle/base/oradata/NEW10/test01.dbf";
# switch all tempfiles
switch clone tempfile all;
# restore the tablespaces in the recovery set and the auxiliary set
restore clone datafile 1, 8, 3, 2, 9, 7;
switch clone datafile all;
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_temp_%u_.tmp in control file
Starting restore at 17-AUG-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00001 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00008 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00003 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_undotbs1_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00002 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00009 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_%u_.dbf
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnndf_TAG20100817T140128_66nl7174_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnndf_TAG20100817T140128_66nl7174_.bkp tag=TAG20100817T140128
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:02:45
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00007 to /opt/oracle/base/oradata/NEW10/test01.dbf
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd0_WEEKLY_66nl9m8k_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd0_WEEKLY_66nl9m8k_.bkp tag=WEEKLY
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:06:55
Finished restore at 17-AUG-10
datafile 1 switched to datafile copy
input datafile copy RECID=6 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1sf_.dbf
datafile 8 switched to datafile copy
input datafile copy RECID=7 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1r9_.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=8 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_undotbs1_66o0x1vr_.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=9 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1vj_.dbf
datafile 9 switched to datafile copy
input datafile copy RECID=10 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1rs_.dbf
contents of Memory Script:
# set requested point in time
set until scn 1791053;
# online the datafiles restored or switched
sql clone "alter database datafile 1 online";
sql clone "alter database datafile 8 online";
sql clone "alter database datafile 3 online";
sql clone "alter database datafile 2 online";
sql clone "alter database datafile 9 online";
sql clone "alter database datafile 7 online";
# recover and open resetlogs
recover clone database tablespace "TEST", "SYSTEM", "UNDOTBS1", "SYSAUX" delete archivelog;
alter clone database open resetlogs;
executing Memory Script
executing command: SET until clause
sql statement: alter database datafile 1 online
sql statement: alter database datafile 8 online
sql statement: alter database datafile 3 online
sql statement: alter database datafile 2 online
sql statement: alter database datafile 9 online
sql statement: alter database datafile 7 online
Starting recover at 17-AUG-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting incremental datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
destination for restore of datafile 00007: /opt/oracle/base/oradata/NEW10/test01.dbf
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd1_DAILY_66nmf6qs_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd1_DAILY_66nmf6qs_.bkp tag=DAILY
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
starting media recovery
archived log for thread 1 with sequence 39 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_39_66nmc1dg_.arc
archived log for thread 1 with sequence 40 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_40_66nmcfw4_.arc
archived log for thread 1 with sequence 41 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_41_66nmcwcf_.arc
archived log for thread 1 with sequence 42 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_42_66nmddbw_.arc
archived log for thread 1 with sequence 43 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_43_66o0wyys_.arc
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_39_66nmc1dg_.arc thread=1 sequence=39
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_40_66nmcfw4_.arc thread=1 sequence=40
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_41_66nmcwcf_.arc thread=1 sequence=41
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_42_66nmddbw_.arc thread=1 sequence=42
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_43_66o0wyys_.arc thread=1 sequence=43
media recovery complete, elapsed time: 00:00:50
Finished recover at 17-AUG-10
database opened
contents of Memory Script:
# make read only the tablespace that will be exported
sql clone 'alter tablespace TEST read only';
# create directory for datapump import
sql "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/opt/oracle/base/flash_recovery_area''";
# create directory for datapump export
sql clone "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/opt/oracle/base/flash_recovery_area''";
executing Memory Script
sql statement: alter tablespace TEST read only
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/opt/oracle/base/flash_recovery_area''
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/opt/oracle/base/flash_recovery_area''
Performing export of metadata...
EXPDP> Starting "SYS"."TSPITR_EXP_BkAq":
EXPDP> Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
EXPDP> Processing object type TRANSPORTABLE_EXPORT/TABLE
EXPDP> Processing object type TRANSPORTABLE_EXPORT/GRANT/OWNER_GRANT/OBJECT_GRANT
EXPDP> Processing object type TRANSPORTABLE_EXPORT/INDEX
EXPDP> Processing object type TRANSPORTABLE_EXPORT/CONSTRAINT/CONSTRAINT
EXPDP> Processing object type TRANSPORTABLE_EXPORT/INDEX_STATISTICS
EXPDP> Processing object type TRANSPORTABLE_EXPORT/TRIGGER
EXPDP> Processing object type TRANSPORTABLE_EXPORT/TABLE_STATISTICS
EXPDP> Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
EXPDP> Master table "SYS"."TSPITR_EXP_BkAq" successfully loaded/unloaded
EXPDP> ******************************************************************************
EXPDP> Dump file set for SYS.TSPITR_EXP_BkAq is:
EXPDP> /opt/oracle/base/flash_recovery_area/tspitr_BkAq_82690.dmp
EXPDP> ******************************************************************************
EXPDP> Datafiles required for transportable tablespace TEST:
EXPDP> /opt/oracle/base/oradata/NEW10/test01.dbf
EXPDP> Job "SYS"."TSPITR_EXP_BkAq" successfully completed at 18:25:02
Export completed
contents of Memory Script:
# shutdown clone before import
shutdown clone immediate
# drop target tablespaces before importing them back
sql 'drop tablespace TEST including contents keep datafiles';
executing Memory Script
database closed
database dismounted
Oracle instance shut down
sql statement: drop tablespace TEST including contents keep datafiles
Removing automatic instance
shutting down automatic instance
target database instance not started
Automatic instance removed
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_temp_66o1k480_.tmp deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/onlinelog/o1_mf_3_66o1k0mg_.log deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/onlinelog/o1_mf_2_66o1jyt4_.log deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/onlinelog/o1_mf_1_66o1jx3w_.log deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1rs_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1vj_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_undotbs1_66o0x1vr_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1r9_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1sf_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/controlfile/o1_mf_66o0wsh8_.ctl deleted
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/17/2010 18:25:36
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on default channel at 08/17/2010 18:25:25
RMAN-11003: failure during parse/execution of SQL statement: drop tablespace TEST including contents keep datafiles
ORA-00604: error occurred at recursive SQL level 1
ORA-00060: deadlock detected while waiting for resource
Recovery Manager complete.
please give your valuable suggestion .It should be more helpful for us.
Edited by: user10750009 on Aug 20, 2010 1:07 AM
Edited by: user10750009 on Aug 20, 2010 1:15 AM

I want TSPITR ,during this operation i faced this deadlock error.
Before that we faced roll backsegment error for that we applied follwing workaround .
If i applied follwing workaround before every backup and restore .i didn't get any error .all things went successful.
spool /tmp/Createtest.log
connect / as sysdba
REM Perform startup in case we are still down
ALTER SYSTEM SET PROCESSES=500 SCOPE=SPFILE;
SHUT IMMEDIATE;
STARTUP MOUNT EXCLUSIVE;
ALTER DATABASE ARCHIVELOG;
ARCHIVE LOG START;
ALTER DATABASE OPEN;
connECT / as sysdba;
alter system set undo_management = MANUAL scope=spfile;
shutdown immediate;
startup;
Connect / as sysdba;
DROP TABLE TEST123;
create table test123 (t1 number, t2 varchar2(10));
begin
for i in 1.. 300000 loop
insert into test values (i,'AAAAAAAAAA');
end loop;
end;
delete test123;
commit;
alter system set undo_management = auto scope=spfile;
shutdown immediate ;
startup ;
The above workaround we applied before creating tablespace and datafile ,after that we face some dead lock error while restore TSPITR .Did you need any more information
Edited by: user10750009 on Aug 20, 2010 1:12 AM

What are dead locks in BW

hI,
What are dead locks in BW

Hi ,
The concept of dead lock is as similar as in Oracle. If Process P1 is using resource A (locked by P1)) and waiting for B and Process P2is using resouce B(locked by P2) and waiting for resouceA. This creates dead lock as both can not proceed further.
In BW deadlock usually occur in delta load. As, far as my observance deadlock usually occurs during processing of update rules. This may be because more than one package will be processing same record as in delta load, data moves from changelog of below level to next level.
Regards
Sushma

Dead Lock occured while Sync index in oracle text

Similar Messages

Maybe you are looking for