Dealer Excise Invoice-Issue while posting MIRO
Dear All,
Today i was doing Domestic procurement with Dealer for Gas Cylinder. In PO we entered total value which includes Excise amount also (1000+103)& VAT @ 14% (154,42).
While doing GR i selected as Only captured excise inv, checked MRP indicator.
Changed the bse value to 1000, entered BED as 100, E Cess as 2 & SEcess as 1.
The accounting entries were correct, Inventory is posting with Rs 1000
Posted excise invoice in J1IEX, the values were coming from GR, its correct and the acc entries were also OK with 103 Cenvat clearing acc Cr & Excise acc Dr.
While posting MIRO, I am facing problems...
In line item i am getting as 1103 Base value...
VAT is calculating on (1103+103) @ 14% 168.84,
so total value is 1271.84
When i simulate, its showing
Vendor 1271.84 Cr
GR/IR clg acc 1000 Dr
Material 103 Dr
VAT 168,84 Dr
There is no cenvat clearing account here
Please help me how to resolve this.
Regds,
CB
When i simulate
Hi,
have you mainatin 100% setoof condition check it it should be there
check MIRo posting date and excise invoice posting date
check condition record validity in FV13
Regards
Kailas Ugale
Edited by: kailasugale on Feb 10, 2012 12:01 PM
Similar Messages
-
Document splitting issue while posting MIRO transaction
Hello All
I have a piculiar related to document splitting while posting MIRO entry and this issue started after defaulting the profit center
to the tax gl.
The scenario is like this
While posting a vendor invoice document where there is a difference in the invoice value and stock is allready consumedn
hence system will try to post the difference to the material difference account.
The following is the asccounting entries
01 vendor a/c cr 1000
02 gr/ir a/c dr 800 pc from po document
03 tax g/l 180 default pc
04 inventory diff 20
the error message
system is not able to determine the profit center at line item 04 and message is
Balancing field "Profit Center" in line item 004 not filled
The document splitting settings are all standards related to vendor invoice ..................
One important point to be noted here is that this issue is come after defaulting the profit center at tax gl.
But we cannot remove those default pc also.
Can be their any solution on this
Kindly suggest
ThanksHi
In addition to my previous mail i want to add that
i tried to add even expense item category to splitting rule of business transaction and transaction variant.
Even then it doers not work.
other then is as per standard document splitting rule the expense item category is not included in invoice verication buisness transaction.
Thanks
alok -
Issue while posting the invoice in background using the WF-BATCH user
Hi Friends,
I am facing an issue while posting the invoice in background using the WF-BATCH user. I am using a invoice approval workflow where in when the approver approvers the invoice the invoice document get posted using a background method, which uses BO FIPP and Method POST and i am returning the Message Text to my workflow container from this method. When i see the log an exception is rasied from this method with an error message "V004: You are not authorized to change this document", but WF-BATCH is having SAP_ALL and SAP_NEW authorizations. If i try to post the invoice using the method from my user id it is getting posted. What could be the issue. Please advice.Hi Sapient,
The Parameter, Roles would be different for the LOGIN USER and WF-BATCH.. So ask your administrator
to set the Roles & Parameters similar to that of LOGIN USER to WF-BATCH.
For further refrence check in SU01 giving the LOGIN USER and then check with WF-BATCH... you would
find the difference...
Hope this would help you..
Good luck
Narin -
Dear Experts,
I have done Miro for excise duty (CIN) of Import Purchase order and then posted the material document in MIGO_GR referencing PO, i have entered the Excise invoice No (created in MIRO ) in the commercial excise invoice no tab,while processing MIGO. Need the link between the tables containing invoice and Goods receipt for report development.
Thanks & Regards
Thangavel ganeshThe commercial invoice number in MIGO just pulls the excise data from the MIRO. It does not get stored in any of the material document tables.
For reporting you will need to go through PO history tables: EKBZ -
While i creation of Excise invoice with this t.code J1IIN with
refference to Billing document this is autometically generated the
Excise invoice and while i save this document the system thowing the
following eror.
AT1 : Debit = 77,01 Credit = 231,03 Diff =
154,02-
Message no. 8I312
Please give the solutoin for this issue,thanks in advance.
with regards,
VenkatHi Bernhard,
Thanks for your previous mail but am not able to solve the problem. I have done some changes in configuration now am getting the following erro.
Error in allocating Excise invoice number Number object J_1IEXCLOC
Message no. 8I336
Please give the more details to solve this issue.
With regards,
Venkat
Edited by: vsajjala on Nov 22, 2010 12:05 PM -
Excise Invoice gets automatically posted in the background - How to prevent
When we do billing through VF01, the excise invoice gets automatically generated in the background. We have checked the CIN settings for "Maintain automatic postings" They are not enabled. But still this is happening. Where to check. For your kind information, ABAP related patches (Basis - Abap support spau pack 16 & 17) were applied in our system yesterday night. Could that be the reason ? Please clarify. We wanted to post excise invoice through J1IIN. We do not need back groud posting.
Should we need to check customization settings anywhere ?Dear Swamy,
Please refer the note: 150813- Wrong Outgoing Excise Invoice generation while billing VF01.
We have sorted out problem with this note.
Thanks to all for responding.
Thanks & Regards
Sreekanth -
Hi Experts
I got a error like this while posting MIRO
"No amount authorization for customers/vendors in company code 401"
I tried to look out in T043 Table,since i cant able to go further
Let me know the reason for this error and the settings to do
Regards
Amuthan MHi,
While creating tolerance group you are specified the authorization group/ Just delete the name of the group you have created and keep it blank OR assign the user to that group and save.
Note:
If you create tolerance groups then the group must be assigned to the users in t.code:OB57 who are posting the transaction. Defining and assigning the tolerance groups to employees is not going to solve, you have to enter the amount ranges of tolerance for G/L document, Customer and Vendor posting.
In t.code:OBA4 create an entry for your company code. (Group creation is not compulsory). If your requirement permits better keep the group column empty. when no group is created its for all users.Double click on company code and enter upper limits and permitted payment differences and save.In t.code:OBA3 enter the ranges for payment differences and any other columns as per your requirement..
Regards,
Biju K -
FI:While posting MIRO getting Error of Balancing field Segment not filled
Hello SAP Gurus,
While posting MIRO getting Error of Balancing field Segment in line item 001 not filled
Message No.GLT2201.
Please suggest me solution for it i read lots of related threats but could not solve this error.SPRO-Financial Accounting (New)-General Ledger Accounting (New)-Business Transactions-Document Splitting-Edit Constants for Nonassigned Processes-Select your constant-Double click and Select Assignment of profit center- Enter your dummy profit center here otherwise
SPRO-Financial Accounting (New)-General Ledger Accounting (New)-Business Transactions-Document Splitting-Edit Constants for Nonassigned Processes-Select your constant-Double click and Select Assignment of values-Enter here segment. -
while posting miro iam getting one error
ie: taxcode v0 country in is not defined in tax procesure lcltax
but i defined that tax code in my tax procesure and i assigned that to country(In)HI SAI VANI
U have to assign the Tax code to ur co cd. The T.Code for that is OBCl. Just check whether u have assigned that TAxcode to ur CO Cd or not.
Assign me points if it helps u.
Regards
Rajaram -
Excise Invoice UOM should Post Based on Chapter ID
Hi All,
Greeting for the day!!!
We have a requirement, like Billing document create in Uom like EA. But Chapter Id for that materials are like KG.
When I create excise invoice UoM Should post in KG's.
for this what we have to do.
Please do needfull.
Thanks and regards,
Prasad.Hi Laxmipathi,
Thanks for your quick reply.
I will try this and let you know.
Regards,
Prasad -
Dealer excise invoice workflow?
What is the dealer excise invoice? what is the MRP indicator in dealer ED capture? What tax code need to select in PO? Please can any one tell the full workflow till invoice settle ment? Executes for unrelated answer
Please go through the documentation and attachment given in the note - 1104456
-
Error while posting MIRO - PO is changed
Dear Guru's
I am getting an error message
PO is changed
Message no. ZFI_INWARD_REG026
while posting the invoice using Miro ..
I know this custom message But how to debug /clear this error message. I do checked in the OMRM - Error message is not maintained in that.
guide me to solve this..
Regards
AnandhHi
I have found the error message under Enhancement - Classic BADI (impl) - IF_EX_INVOICE_UPDATE~CHANGE_BEFORE_UPDATE method
IF wa_ti_mrmrseg-ebeln IS NOT INITIAL.
IF wa_ti_mrmrseg-ebeln NE wa_inward_reg_no-po_number.
MESSAGE e026(zfi_inward_reg).
ENDIF.
ENDIF.
--- How to find the reason for triggering this message and how to resolve this issue.
regards
anand -
First Stage Dealer Excise Invoice
Hi,
We get an Excsie Invoice (First Stage Dealer Invoice *** Challan) from a Vendor as per the below detail:
Qty: 480
Rate: 114
Net Value: 54720
Assessable Value for Excise: 72480
Excise 10%: 7248 (Recoverable)
ECess 2%: 144 (Recoverable)
SHECess 1%: 72 (Recoverable)
Value for VAT Calculation: 62184
VAT 5%: 3109 (Recoverable)
Total Invoice Value: 65293
I have tried to map the scenario with SAP Note 1104456 - Use of MRP indicator for capturing excise duties from dealer but could not succeed.
I am not able to decide on following:
a. the Net Price in the Purchase Order,
b. Amount (Base Value, Excise Duty) which needs to be the entered manually at the time capturing Excise Invoice at the Goods Receipt (T Code: MIGO) with MRP Indicator.
c. the invoice amount at the time of invoicing.
Request you to please help us in the above scenario.
Also request you to tell me the FI Entries with Amount at all the stages.
Regards,
PKHi,
For the excise value you have to run the transaction code J1IEX(selection Capture:left corner in the screen) to capture.The system will take the base value and quantity from the Purchase order as u are going to capture the Excise amount with Reference to Purchase order by default. If quantity and Base value as well as the BED ,Cess, Ecess you have to change manually if reuired.Then save it......Go for GR....the system will ask the Excise invoice ref no. and date of Excise Capture.(in selection you take referral....option will be there).put the vendor Excise number and date which was given at the time of capture.system will take the capturing excise amount automatically.Check all the excise amounts in Excise Item.Post the GR.Again go J1iex transaction code select Post option(left corner)..put either vendor inv. no. or internally generated Excise no. and post it.
now for Vat amount the tax code will calculate in the P.O it self ...check that one .....the same amount will come at the time of MIRO.
and also the excise amount will come as per it is captured and posted when you trick on the check box (calculate tax)
With Regards,
Sudipto -
Dear Friends,
Business Process: The depot receives the material in bags, after that they torn the bags and sell it in loose (some times they sell it in bags also). So to differentiate the loose material they are maintaining the material in a storage location called LOOS (apart from storage loc. BAGS).
1. After MIGO and while capturing the excise (J1IG) the storage location is BAGS.
2. After receiving the material they are transferring it to storage location -LOOS with MB1B (movement type-311).
3. After PGI, while doing depot excise invoice (J1IJ), system is not able to select the reference document, since the storage location is different.
Pl guide me how to rectify the problem.
Also tell me, is there any other procedure that we can adopt to resolve the issue.
Regards,
SreehariHi
Check in J_1IWRKCUS table wheather the plant, excise regn and Depot are there coming or not. Also check in Excise group details wheather you have checked the box of Depot settings.
Regards
Srinath -
Error While Posting MIRO of Imports PO
Dear Sir
When we are trying to post MIRO for Imports PO with Local currency we get following Error
Enter rate INR/CHF rate type M for 16.05.2011 in the system settings
For IV (Invoice Verification) we use currency CHF as our Vendor currency is CHF.
But During MIRO for Customs clearing Charges and Freight Forwarder charges we need to use INR at that time we get this Error.
Enter rate INR/CHF rate type M for 16.05.2011 in the system settings
If we maintain currency rate in OB08 of INR & CHF will solve this problem?Dear:
Your question is self explanatory. System is asking you to maintain exchange rate for date 16.05.2011. Maintain the rate in OB08 and your issue will be resolved.
Regards
Maybe you are looking for
-
How can I remove the Demo Viewer from my MacBook?
How can I remove the Demo Viewer from my MacBook?
-
Unable to delete saved Crystal reports in SAP BW Browser
Hi everyone , We are trying to test Integration of Crystal reports with SAP BW . CR developer version installed - 12.0.3.900 SAP BW 7.0 I have 2 issues : 1) When I try to open SAP Query from CR SAP menu bar , somehow a blank SAP screen opens first an
-
Help needed with File.canRead()
I'm having trouble getting File.canRead() to return true when I think it should be. On my Solaris 8 system there should be an empty directory called: /h/data/local/ME In order to check if it exists, I have my program create the path to the directory
-
I buy extension from adobe online, i installed it correctly but then the extension menu was greyed out and i can't click it. Some help please.
-
Quality inspection in repetitive mfg
Hi I have some queries in quality inspection setup for REP MFG. 1. Setting up inprocess inspection 2. GR Inspection from production 3. At what stage the QM lot is generated . The inspection types used for PP-P1 03 and 04 hold good for above or should