Dealing with messages

hi ,
i am working on an application in which i have to deal with more than one exceptions and i am showing these on screen also as messages. Now code come across more than one exceptions it will run and finally ends up displaying all the messages on screen. Is it possible to limit the no of messages displayed in message area as one.Please suggest if it possible without much changes in code.
Thank You.

Hi Vishavdeep,
In case if you are throwing exceptions by looping at exception table one way is instead of throwing standard exception messages throw one custom message of your custom message class describing the error.
In case if the exception you are getting in code sequentially one after other and for each you are thorwing the message using message manager class then you can simply write exit inside an if condition where you are displaying error messages. This will stop further excution and the other exceptions yet to come in the code will not be printed.
In case still you have some doubt please revert with some more explanation of your query.
Regards,
Neha

Similar Messages

How can I create unique partnerships to deal with like EDI messages?

I have an EDI to Application partnership setup currently that deals with translating MEDRUC type EDIFACT messages to a mainframe format. The setup is
Sender = PARTNERA,
Receiver = PARTNERB
DocType = MEDRUC.
In the Input EDI tab the
Sender Qualifier ID = ZZ:PARTNERA
Receiver Qualifier ID = ZZ:PARTNERB
Standard = EDIFACT
Version = D
Release Number = 97B.
Use UNG to locate partnerships = No
EDIFACT messages contain all this information in their UNB and UNH segments which is where SunONE IS B2B looks to then match against the relevant partnership. My problem is this does not go to enough granularity for me to distinguish uniqueness for the second partnership I need to create.
The problem is the "Association assigned code" field in the UNH for EDIFACT messages is not catered for anywhere in the partnership details area. This means then that whilst my existing partnership deals with Simplified Billing Claim MEDRUC's which is Association assigned code = SBC20, I can't create an EDI to Application partnership for PARTNERA and PARTNER B to cater for Two Way Gap Claiming MEDRUC's which are Association assigned code = TWC10, ie the two messages are D97B MEDRUC type messages only distinguished from each other by this Association assigned code.
Any ideas how can I then create a unique EDI to Application partnership for this TWC10 MEDRUC message?
What I am thinking I will have to do is make this second partnership Application to Application and create a custom service to wrap the MEDRUC message with a HREC/TREC and use the parameters in the HREC to dictate the DocType rather than use the UNB/UNH segments in the MEDRUC?

Hmmm. It looks like way back when the decision was made on how specific the keys had to be, they didn't get quite specific enough for your case. I'm not super experienced with EDIFACT but I'll throw out some suggestions based on my HREC and X12 knowledge.
A. Could you handle both instnaces through the same partnership, but alter the map to create unique outputs based on the two different types? At least of the cards would need to be handled through Route, but you could have that picked up by a simple Outprep / Gateway Service list that put the data where you wanted it.
B. Before Parse, run a custom service that is capable of inspecting for which type of data it is, then modify one of the key fields in place to find the Second partnership. Really getting adventurous, maybe you could alter keys in the UNG to make the distinction. This assumes that you don't have both types of documents in the same interchange.
C. Your idea may be workable. Can you give some more detail on the make-up of the Service list and the destination/processing of the two differnt types of MEDRUC?
Thanks.

How do I deal with constant "error loading content" messages?

I'm constantly seeing error messages on my Apple TV (2nd gen) on content I easily watch on my other iDevices. What gives? This thing is rapidly becoming a vy expensive paper weight. Possibly the worst Apple product I've yet purchased. Am I alone in this? What can I do?

You cannot connect to TC using USB.
Plug the TC into the computer using ethernet.
Press and hold the reset button on the TC for about 10sec.. until front led rapidly flashes.. release it.
Open the airport utility and make sure you can locate the TC. Check the disk page that the disk started up without errors.
When you say
Sodrawi wrote:
How do I deal with the error message at my Time Capsule saying "There is a problem to connect to server xxxx-Time-Capsule.local."
I am guessing you mean Time Machine.
If TM still cannot find the TC disk.. reset TM and redo the setup.
Read A4 here.
http://pondini.org/TM/Troubleshooting.html

How do I delete a Gmail message on my phone, but keep it on the server so I can deal with it on my iMac? What settings are required, or is this impossible?

How do I delete a message in my gmail account, but keep it on the server so I can see it on my iMac when I log into gmail.com? I set up the gmail account on my iphone NOT through the colored "gmail button" but through "add account." And I've enabled IMAP in the settings when I log in on my computer to gmail.com.
Thanks!

Gmail uses IMAP. It's designed to keep all of your devices in sync. If you delete on one, it will be deleted on all of them. However, deleted means that it's in the trash. You could always retrieve it when you're using your Mac. Or, just create a folder that you move things to to deal with later.
Best of luck.

TS1436 I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

Hello Pat,
The following article provides troublehsooting steps and information that can help get iTunes burning discs again.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
Cheers,
Allen

When I try to sync my Ipad Mini, I get an error message that says "sync session failed to start". Anyone ever deal with this?

When I try to sync my Ipad Mini, I get an error message that says "sync session failed to start". Anyone ever deal with this?

Quit iTunes, restart your computer, restart your iPad and try again. If it doesn't work with a restart of the iPad, try a reset of the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I'm receiving a message that items are not syncing and says I should go to iTunes. However, I can't find in iTunes how to deal with issue. Any suggestions?

I'm receiving a message that items will are not syncing and the messages says I should go to iTunes; however, I can't find an area in iTunes that deals with my issue. Any suggestions on where I should look for the solution?

Right click on your device icon on the left pane of iTunes and click on transfer pur....

Open message to Apple - why the **** do you force us to deal with this Genius Playlist crap if using iTunes Match?? GET AN OFF OPTION INSTALLED. I AM PAYING FOR MATCH SO QUIT FORCING YOUR INANE ATTEMPTS AT WHAT YOU THINK I LIKE!!!!!!

Open message to Apple - why the **** do you force us to deal with this Genius Playlist crap if using iTunes Match?? GET AN OFF OPTION INSTALLED. I AM PAYING FOR MATCH - SO QUIT FORCING YOUR INANE ATTEMPTS AT WHAT YOU THINK I LIKE ON ME !!!!!! YOU ALREADY HAVE THE OPTION WHEN MATCH IS OFF. HOW CAN YOU POSSIBLY THINK THERE IS A CONNECTION????? LET ME ME ME DECIDE!
IF anyone knows how to turn that Genius crap OFF WHILE MATCH IS 'ON' - Please let me know. Under 10.7
I HATE THESE PLAYLISTS - NEVER USE THEM- WASTES MY SCREEN REAL ESTATE..

At the moment it is not possible to disable Genius Playlists on iOS devices. However, these forums are user-to-user forums and no Apple employees participate here. You would be better to submit your polite feedback via the Apple Feedback page: http://www.apple.com/feedback/

ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?

iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server.

How do you deal with error message when downloading movie on iPad? It was 75% complete.

How do you deal with error message when downloading movie on iPad2. Movie was 75% complete.

I was using wifi. It shows as a purchase on iTunes but it does not show up on iTunes for download. I keep getting the download error with our a number attached on the iPad. Very frustrating. Apple has been of no help at all.

Hi, my Iphone 6 dropped in water, and couldn't save it back although I tried with rice bag. So,how much would be cost if I can exchange with new one? Please kindly drop message about how to deal with it. Thank you.

Hi, My Iphone 6 " iOS 8.1" is dropped in water, and couldn't save it back although I tried with dryer and also put it in rice bag for 3 days. The flash light was still on even though the screen shows up nothing at all when i try to switch on after 3 days I put in the rice bag. So,how much it would be cost if I can exchange with new one? Please kindly drop message about how to deal with it. Thank you.

Out of Warranty replacement on iPhone 6 is $299 US, adjust for your location.
It is highly suggested that you make a Genius Bar appointment to avoid delay
if going to an Apple store.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/

Dealing with null values from a database (easy?)

I'm sure this should be a simple question :
I'm creating a dynamic dropdown of my companies products that once a product is selected draws values (links) from a database and displays them (links to User guides, FAQs etc).
My problem is dealing with blank entries in the database - i.e. if a product doesn't have a User guide I've left the database blank.
I'd like to show 'none' or 'not available' if the entry is blank rather than the 'null' I currently get.
I'm sure it should be a straightforward if .... else .... but I'm struggling and would appreciate any help,
Many thanks,
Mo

Thanks for the message, the cut down piece of code I'm using for the output is:
<%
while (rs.next())
//header row
out.println("<tr bgcolor='#666666'>");
out.println("<td>Product Name</td>");
out.println("<td>FAQs</td>");
out.println("<td>Technical Information</td>");
out.println("</tr>");
//results
out.println("<tr border='1' bordercolor='#CCCCCC' bgcolor='#FFFFFF'>");
out.println("<td><a style='text-decoration:none' href=" + rs.getString("ProductURL") + " target='_blank'>" + rs.getString("ProductName") + "</a></td>");
out.println("<td>" + rs.getString("FAQs") + "</td>");
out.println("<td>" + rs.getString("TechInfo") + "</td>");
out.println("</tr>");
stmt.close();
conn.close();
%>
It's the FAQs and TechInfo strings I need to use the statement on - if there's no entry show 'none',
Thanks again,
Mo

I need to reinstall my computer, how do I deal with Premiere pro and After effects?

Hello,
As my question states I need to reinstall my computer (laptop) and I'm not quite sure on how to deal with Premiere pro and After effects.
I am thinking that I need to do some sort of backup and save my projects and footage on a sepparate drive.
If I reinstall my computer, install my creative suit production premium, and move back all of my projects and footage, won't I have to re-link every single clip?
I am currently workning on several different projects and having to re-link everything is something I don't even want to think about, that would take me days if not weeks.
Another option on my mind would be to use Creative cloud. I do have the free version but I have never used it even once before and I'm not quite sure what the purpose of the cloud is and if this is a way to use it.
I have no idea how to go about this computer reinstalation without either loosing tons of work or having to re-link every single clip used.
I am videoediting only as a hobby so I have no experience working with other people and sharing projects or the like, wich is my understanding of what the cloud is for.
Any and all help would be grealty appreciated, I know this is probably really easy but ever since i got my Suit I haven't reinstalled, upgraded och changed my computer so I am just clueless as to how to go about this.
I have Creative suit production premium, I also have the free Creative cloud.
It is only Premiere pro and After effects that I am using and am worried about.
Thank you for any help.
-Lisa Kajupank
(and oh, I just notice my name - umustbejoking - I think I just wrote that cause they wouldn't let me use anything else, saying it was already taken. So nevermind that haha.)
Message was edited by: umustbejoking

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(84620)

How to deal with deadlock on wwv_flow_data table when http server times out

There are some threads about a deadlock on the wwv_flow_data table. None of them contain a real explanation for this behaviour. In my case I will try to explain what I think is happening. Maybe it helps somebody who is hitting the same matter.
In my case with APEX 3.2.1 I am navigating from one page to another. Doing this APEX will lock the table wwv_flow_data. As soon as the other page is shown the lock will be released. But now this other page contains a bad performing query (standaard report region). After 5 minutes the http server (modplsql) will time out and present the message "No response from the application server" on the screen. In the meanwhile the query is still running on the database server and the lock stays on the wwv_flow_data table.
Normal user behaviour will be that the user will use the back button to return to the previous page and tries it again to navigate to the other page or
the user will try to refresh the page with the bad performing query.
And voila now you will have a deadlock on the wwv_flow_data table since a second session is trying to do the same thing while the first hasn't finished yet.
How to deal with it?
First of all. Have a good look at the bad performing query. Maybe you can improve it that it will succeed before the http server will timeout.
In my case the 11gr1 optimizer couldn't handle a subquery factoring clause in the best way. After changing it back to a classical inline query the problem was solved.
Secondly you could increase the timeout parameter of the http server. Although this not the best way.
Maybe it would better if APEX in a next version would release the lock on the table wwv_flow_date earlier or do a rollback just before the moment that the http server is timing out.
regards,
Mathieu Meeuwissen

Hello Shmoove,
I saw your reply here and you probably understand the problems the HTTP 100 response may cause.
I am trying to send image that was taken by getSnapshot. The problem is that the server respond with this HTTP 100 message.
I suspect that the reason that my server doesn't recognize the file that I'm sending from J2me is that the "server to client" response to the 100 message comes after the second message of (see what the TCPIP viewer shows down here):
POST /up01/up02.aspx HTTP/1.1
Content-Type: multipart/form-data; boundary=xxxxyyyyzzz
Connection: Keep-Alive
Content-length: 6294
User-Agent: UNTRUSTED/1.0
Host: szekely.dnsalias.com:80
Transfer-Encoding: chunked
400: Client to Server (126 bytes)
78
--xxxxyyyyzzz
Content-Disposition: form-data; name="pic"; filename="david.jpg"
Content-Type: application/octet-stream
400: Connected to Server
400: Server to Client (112 bytes)
HTTP/1.1 100 Continue
Server: Microsoft-IIS/5.1
Date: Wed, 23 Mar 2005 00:47:02 GMT
X-Powered-By: ASP.NET
Any help will be appreciated,
David

My brand new Macbook PRO crashed completely after it went through the iOS 10.7.4 update, I lost everything and Apple just wants to replace the HD and let me deal with the hassle.

Last Thursday May 10th I received a prompt from the Automatic Update to update the iOS to Ver. 10.7.4, set the start and was watching the progress when it stopped with an error message saying that it was not able to update, right below there was a buttom "RESTART", pressed the buttom and waited to re-boot.....That was the end of my computer, somehow the update crashed my HD beyond recover, it would only show the gray screen with Apple logo in the center and kept beeping, BEEP BEEP BEEP.....PAUSE.....BEEP BEEP BEEP.....PAUSE.....on and on and on and it never past that.
Friday May 11 I took it to a retailer where I received the bad news that the HD was crashed and the teck couldn't even try to copy anything from it as it couldn't locate it. I checked iCloud on a hope that all my stuff would be there but new surprise, iCloud didn't kept all of my stuff as it was programmed to.
Now here is the funny part, the tech from the retailer informed me that the only thing they could do was to order a new HD for my 4 months old Macbook and that the time to have my computer back will be at least 15 days, now that is the funny part, I fail to understand why do I have to suffer the hassle of loosing all my data plus wait at least 15th days to have my computer back (meanwhile loose work) on a problem caused by Apple, PROBLEM, not machine defect, clearly my computer had no problem untill I followed the procedure to update.
On Saturday May 12 I contacted Local Apple Support (I have failed to mention that I live in Brasil) and they informed me that what the dealer said was the only thing that could be done, too bad for me if I lost everything, going to loose several days of work and whenever I receive my computer back will have to re-construct all my life and deal with the forever lost data.....DEAL WITH IT
After a couple of discussion with Apple Support and the Dealer, I made my decision to take the Macbook to the dealer today for repair and meanwhile I'm opening a case with the Brazilian Justice to have Apple honor with all the trouble and hassle that it is causing me, it's said that I have to take this type of action as I'm a very fan of Apple and it's products, have had several iPods, iPhones, Macbooks, Keyboards, Mouses, Apple TV, etc.....This i the first time I have a problem with a Apple product and got a taste of the "Apple Care", it seems like Apple is more concerned on seeling products then keeping long time customers happy.
One last thing, today when I was at the dealer to drop my computer for repair, the Technician informed me that he also had a computer crashed and the HD erase on Sunday May 13th in the same way of mine, after the update everything was gone, also he said that we were not the only ones, iPads and iPhones were going trough the same situation, update causing complete breakdown.
WORD OF ADVISE, BE 1000% SURE THAT YOU HAVE EVRYTHING BACKED UP BEFORE YOU GO THROUGH AN UPDATE.

rvalezin wrote:
If I need to back-up every hour of my life in order to be able to save everything from something like this I won´t do anything else.....at least we should be able to trust that Apple tests this updates so situations like this won´t happen.
That's exactly what Time Machine does for you. It backs up every hour, so you don't have to. While it is backing up, you keep on working. Time Macvhine came with your Mac and you chose not to use it.
The 10.7.4 update did not cause your hard disk to fail. Hard disk fail due to mechanical causes. They are extremely reliable, but that doesn't mean every hard disk will last a long time. Your mileage WILL vary!
If you are dependent on your computer and the data stored on it, then you should make sure you have AT LEAST two copies of all data and probably three or four. You should use at least two means of backing up in case the backup software has a problem. And you should consider having a backup computer if you live in an area where replacement takes too long (whatever too long is for your business).
Apple hardware and software is very, very good. You have documented your experience of this. But NO hardware or software is perfect. You also have experience of this.
It is YOUR responsibility to ensure that your system is set up to protect your data and availability of computing resources.

Dealing with messages

Similar Messages

Maybe you are looking for