Dear iWeb users with problems publishing

I have run the gamete of error messages today, all day, and still.But I have been able to publish all I have tried to publish today. The program just seems determined to undermine my confidence.
So if you keep getting error messages, please check your site, it seems to be publishing just fine, just not finishing the talk back(?) to itself.
Wish I had checked the site before I wasted hours trying to get the program to admit it had done a fine job of publishing. Seems to be the latest upgrade is at fault, I have not had so many error messages since 1.1.0. Or whatever it was called.
So please check your site, it just might have worked.
Having a great ^&&^%5 time in Chile
Message was edited by: Bob xyz

Vark,
I know aardvarkland has gotten pretty large; when you
publish, are you simply clicking "Publish", or do you
go to the menu and "Publish all to .Mac"?
Just Publish. Unless I get errors, then I Publish All in case something got mixed up.
And I run MRI on only recently changed pages, see here:
http://discussions.apple.com/message.jspa?messageID=3266451#3266451

Similar Messages

  • Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

    Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open.   I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
    Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
    Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • Have conflicting views from Apple Specialists; I'm ready to buy my 1st Mac, however work with a PC user with MS Publisher files a lot.  Can Pages open, edit and resave them?  Or, do I have to buy Publisher software for Macs?

    Have conflicting views from apple Specialits; I'm ready to buy my 1st Mac. However, I work with a PC user with MS Publisher files a lot. Can Apple PAGES open .pub files, edit and resave them?  OR, do I have to buy Publisher software for Macs?  if yes to buy, any recommendations?

    If you want to switch from PC to Apple I recommend a programm like Parallels.
    It has a tool (believe its called transporter) which runs on your current PC and creates a file (big) which is a "virual machine". It is a 1:1 copy of your PC which will run under parallels on your iMac.
    You will be running your "old" PC as it was under MAC OS X while you run MAC applikations etc at the same time.
    This is how I made the transition to Apple.

  • PDF addresses not longer load and display PDF in Firefox and solutions suggest to other users with problem DON'T WORK (work fine in Chrome and Safari)

    This is an ongoing problem with other users. When putting a PDF in address window of Firefox and clicking go to address FIREFOX WILL NOT LOAD AND DISPLAY THE PDF. This problem has come up in questions from other users on your site. NONE OF THE SUGGESTED SOLUTIONS WORK! (trying either the Firefox PDF viewer or the Acrobat viewer as default viewer)
    I am using Firefox 23.0.1 (as some of the other users with the same problem). This was not a problem in the past with Firefox. Safari and Chrome continue load and display PDFs just fine from their addresses. This is a big problem as I now have to inform people who want to view my PDFs NOT TO USE FIREFOX BUT TO USE SAFARI OR CHROME.

    It appears that a link to a PDF on an internet page will not download in Firefox either!
    I went to this page:
    http://www.nasa.gov/connect/ebooks/earth_art_detail.html#.UjYEzrwsU08
    and tried to download the PDF link at the bottom of the page (Download: PDF 11.3 MB) It didn't work! Nothing happens. Tried it in Safari and it worked flawlessly.
    I have a PDF file of my work in the public_html folder on my URL. I give the address generated by that file to people who want to view my work---this works perfectly in Safari and Chrome. As to your other question, can't bookmark it if I can't get to it in Firefox.

  • New user with problems in Flickr

    I'm a brand new automator user. I am going through the tutorial first few examples for using Automator on www.automator.us in order to get a general idea of what I can do with this program. I was able to get through the "Re-name Finder Items" just fine, but ran into a problem while going through the "Images from Webpages" section (http://automator.us/examples-02.html). I followed the instructions, it appears, exactly but am getting an error when running the workflow during the "Get Image URLs from Webpage" (2nd) stage. I am trying to capture the images from Flickr.
    The error is this:
    Applescript Error
    sh: -c: line 1: unexpected EOF while looking for matching `''
    sh: -c: line 2: syntax error: unexpected end of file (2)
    I would appreciate any help with this. I was really excited to start using the Automator to it's fullest potential, but am incredibly discouraged by this probably simple problem. Thank you so much for any help.
    Max

    I am also having similar problems waking the system from standby.
    I had it in S1 and the power light and the hdd light both came on, but I got a blank screen and then finally it rebooted?  So, I changed it to S3 and the system appears to shut down completely when I hit wake.  I will try the different settings on page 3-18 per your comments above.
    Also, I do have Cool n' Quiet enabled.

  • Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found  This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting?  T

    I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
    Have published iweb site for five years with no problems and just opened a new site and get -
    404: Page not found 
    This error is generated when there was no web page with the name you specified at the web site.-
    Troubleshooting suggestions:
    Ensure the page you are linking to exists in the correct folder.
    Check your file name for case sensitivity . Index.htm is not the same as index.htm!
    Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
    is the problem with
    iweb or with hosting?
    One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
    to local folder. NWS has checked sttting a few times-
    Any help would be extremely appreciated as trying to fix this for about five weeks
    Thanks VG
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
    You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
    If that's not the page you are having trouble with, what is that page's URL?

  • Problem publishing Photo page with iWeb 08

    Hello,
    I have a problem when publishing photo pages with iWeb 08. Upload starts and then I get the error message that iWeb encountered a problem while publishing. The funny thing is that I can see
    the photo page in Safari. The only problem is that when starting the slide show I can not see the
    forward/backward buttons. Publishing a photo page with iWeb from a .me web photo gallery works without any error message, but still when starting the slideshow the navigation buttons are not displayed. Actually if you click on the place where the navigation buttons are supposed to be,
    you can go picture forward/backward. Any idea ?

    I am having the same issue, except I do not get any error messages when publishing to a folder. Clicking on the "index" file within the folder will open the photo page in both Safari and Firefox. Everything functions as designed except no forward/backward/pause buttons are visible below the slideshow. There are text box outlines with a question mark where these buttons are supposed to be located, and I can pause, advance or reverse slides. Eventually these question mark outlines disappear and stay disappeared.
    The end result is there are no intuitive graphic indicators on the slide show to even suggest to the viewer that he/she has some control over the presentation. I don't believe I can add explanatory text boxes to the slide show to compensate for the missing icons. This lack of visible control elements in the slide show is a huge issue. I am reasonable sure the problem does not reside within my computer. I've also reviewed inspector control options for a photo page/slide show and haven't gotten any combination of check boxes to make a difference.
    I'm beginning to think this may be an unexpected conflict that was contained within a recent software update. It might well be worth a close look at programming code by Apple technicians. In the meantime, can anyone offer a clue as to what might be going on?

  • Problems publishing iWeb page to my website

    Hello, I'm having a heck of a time trying to get my iWeb page published to the free host server I chose. I have a subdomain name and account at atspace.com and no matter what I do, the darn webpage will not work. I'm a complete newbie to webpage publishing although I have decent knowledge of computers. I went through the entire process of making my page on iWeb, then published it to a folder on my computer, and then have been trying to upload the page to the site using cyberduck, and yet every single time I try to upload any file from the web page, cyberduck connects, but then says the following: ftp error cannot create folder, /About _files About: Permission denied. I've followed all of the steps I'm supposed to from help sites on the web about how to publish an iWeb page to a free host server and it even is connecting to my server, but when I try to upload the actual pages, it won't work. I even downloaded WebEcho as well, and same thing, WebEcho says it worked and that everything is great, and yet I visit the site and nothing works. If I go to my website address it just comes up blank and says that safari can not find the server. I am at my wits end and am becoming incredibly upset with the whole thing. I don't know if iWeb is not working, or the server is not working. I have an account with the server though, I registered the subdomain name, and when I test the connection, it works, but when I type the website address in my browser, it doesn't work. If someone could help me figure this out, I would be very happy and appreciative. Thanks in advance.

    To summarize: you use Cyberduck to upload the files to the server.
    If that's the case it's not an iWeb issue. Its role ends when the pages are published to the folder on your desktop.
    If Cyberduck cannot create folders on the server then you have to find out what the problem is. Either on the server or with Cyberduck.
    On basic question is : do you publish to the correct folder on the server? It's usually named public_html, html-docs. Check with your webhost.
    +*Not sure what you mean by is it published to the correct folder on the server. I published the page onto my computer, it's in the sites folder on my hard drive. iWeb says it's uploaded or whatever and would I like to visit the site. So I click yes and it takes me to this website: file:///Users/ryanfick/Desktop/Ryan%20Fick/About%20.html This is not the server or the subdomain name I registered so I'm not sure what this is. It works though and I can navigate around the website, but when I go to the website I have a subdomain name at, it doesn't find it. Plus, I have no idea what public_html or html-docs means or is, you would need to explain that to me for me to know what or how to find it or use it.*+
    BTW, why not use iWeb to do the publishing. Enter the details in the FTP setup. But check the details with your host first. If Cyberduck cannot publish the pages, then iWeb cannot either.
    +*I have already tried to use iWeb to publish the site as I mentioned above, but nothing is working. Thanks for the quick response, but I'm almost completely lost on almost everything you asked or talked about. I'm a newbie to webpages and ftp and such. I have no idea on most of the questions and comments. I do have a few questions. Do I need to manually go to atspace.com and upload all the files individually? There are like a thousand files under the main files. And second, I've been trying to use Easy iWeb to publish it and it is asking me to input a folder to input on to the website that your iWebsite will be published to. I have no idea what this means or what it wants. It says to leave blank if you want to publish it to the top level of your website. So I left it blank and clicked on check configuration and it says configuration OK. So then I go back to the main page and click on publish to web and it says Ready, uploading, then failed to upload file: About .html at /Users/ Does this help at all? What do I need to do, what is going wrong? I feel like I am in bizarrO world right now where right is wrong and wrong is right and nothing works. Thanks*+

  • Problems publishing to iweb

    I just want to thank everyone who post on here as your advice really does help.
    I had problems publishing to iweb and the following suggestions made by you all helped me overcome the difficulties I was having. I am posting this so that others who may be having the same problems as I was may sort their iweb out too!
    Obviously not all of these will help everyone and some people may disagree with what I have said but (touch wood) these ALL sorted out my iweb
    1. Empty your cache frequently.
    2. Do not use web counter/email me buttons
    3. rename your photos so that you are not using !@£$%^&*()_
    4. keep trying
    iBook G4   Mac OS X (10.4.5)   http://web.mac.com/gillianward/iWeb/Site/Welcome.html

    No, its not strange at all. When you set up a MobileMe account and publish a site from iWeb it publishes to your iDisk, which is your Apple server that host your site.
    Your url for an iWeb published site to MobileMe will be http://web.me.com/username/sitename. You don't actually need the sitename if you only have one site, so as OT has said http://web.me.com/username.
    No - reggie88.com is not your username, this is a domain name. www.reggie88.com is a domain name also, not a MobileMe username. Have you actually gone to a domain name registrar and registered a domain name? If you want to use a domain name with MobileMe, then you need to go and purchase one first from a domain name registrar.
    No - iWeb does not tell you in iWeb that you username is www.reggie.com. The only way that iWeb will have this at the bottom, is if you have logged into your MobileMe account and gone to the Personal Domain name settings section and entered a personal domain into here. Log into your MobileMe account and check whether you have done this - this is the only reason why iWeb will display this.
    Next question, do you actually own or have you purchased a domain name - reggie88.com? If you have, then you can use this domain with a MobileMe account, but there are other steps that you need to go through first to link the two.
    In the meantime, find your site by entering the url http://web.me.com/username which in your case is probably going to be http://web.me.com/reggie88 and you should get to your site.

  • Problem publishing my iWeb site to new server

    I have a problem publishing my site to a new server HostGator.
    I click publish, everything continues normally, then I get an ERROR notice:
    Publish Error
    There was an error communicating with the FTP server.
    Try again later, or check with your service provider                  
    Since I changed the settings for the new server all the iWeb pages symbols go pink every time I close and reopen iWeb.  Once I have tried to publish and get the ERROR notice I see that most of the pages have turned blue (suggesting they have been correctly published) and the same 5 pages remain pink (suggesting they have not been published)   I have used the HostGator link
    http://gator694.hostgator.com/~carouge1/carouge-art/Welcome.html
    to look at the uploaded pages.
    All the pages are on their server file BUT the pages which remain pink on iWeb have problems. These problems (missing photos etc.) don't seem to affect the pages when the site is called up normally. The site is apparently still being uploaded to people’s computers through MobileMe eventhough I have changed the server settings! So I’m assuming the page problems will show up after MobileMe stops at the end of this month?  I cannot find an explanation for the failed pages from HostGator or from the Apple online answers.
    Grateful for any advice.

    I am having a similar problem trying to upload from iWeb through FTP to MacHighway web hosting.
    I am using iWeb 3.0.4, the latest version.
    I have followed the instructions on the MacHighway site: https://customers.machighway.com/knowledgebase.php?action=displayarticle&id=10
    When I type "public_html" into Directory/Path window in iWeb I get the following message:
    Testing failed.
    The directory/path couldn't be found.  Verify your settings and try again.  
    When I type "/public_html" or /public_html/" into Directory/Path window in iWeb I get the following message:
    Testing failed.
    A connection to mel.machighway.com couldn't be established.  Verify your settings and try again.
    Unlike carougeart, however, nothing gets uploaded.

  • Chrome (Windows NT 6.1 6.2) users reporting problems with loading and mouseevents - any insights?

    For several years now, I have created simple studies (I do psychological stuff) to run online, recruiting participants through Amazon Mechanical Turk (AMT). I have had no problems until recently (last 6 to 9 months). Now, some AMT users are reporting problems with stimuli loading or buttons not responding immediately when clicked (e.g., advancing to a new screen). What is common amongst all the users experiencing problems is that they use Chrome, and they also tend to be Windows NT 6.1 or 6.2 users running Flash Player 12.0. But not a single Firefox, Safari, or MSE user has ever reported an issue. I'm just looking for help in troubleshooting this problem. Again, the studies I run are incredibly simple (e.g., no videos being loaded from server, etc.), mostly word presentation where I record time and x,y coordinates of mouse movements as they respond to questions. Would attempting to publish for another target version of Flash Player help? The default setting is to publish the .swf and .html wrapper for Flash Player version 11.7. Any ideas? I also use version 13.0.1 of Flash Professional CC to create my studies if it helps. 

    This is helpful. Thanks. So it would be to my advantage to play around with something like SWFObject 2?
    http://www.adobe.com/mena_fr/devnet/flashplayer/articles/swfobject.html
    Or is there something else you would recommend?
    What I've been doing is a far cry from actual web development, but quite interested in learning more. This swfobject seems to get at what you are suggesting (I think). 

  • HT1206 Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

    Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

    You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

  • What's the problem with having multiple users with the same UID?

    I've got three edit systems connected to the SAN using open directory off our server.
    I want all edit systems to have read/write access to everything created. I don't need to protect anything from any of the systems. With all three systems logged on using the same user, I never have to change permissions.
    The other cool thing about this is that Final Cut Pro will let me know if someone else is modifying a project that I have open with the warning:
    “The project "projectName" has been modified externally. If another user is working on it, saving will overwrite their changes. Do you still want to save?”
    This sounds great, right?
    RED FLAG!!!! Apple gives the warning in this article:
    http://docs.info.apple.com/article.html?artnum=302450
    "You should not allow two users with the same UID to access an Xsan volume at the same time."
    So why is it bad to have two (or more) users with the same UID?
    I can see that in some situations it means that you can't prevent people from read/write privileges. But I don't want to restrict privileges.
    What am I missing? With all of these warnings, it seems like if I do this my edit systems could all explode or something. Please help me understand the potential ramifications of having three users have the same UID.

    Hi Russell,
    1) If you have OD set up and "editor" has UID 1111, then when they log in to any machine that's bound to OD as editor, they will get UID 1111. Therefore, there won't be any of these permission errors. This is typically the recommended approach.
    2) I assume you mean "You'd prefer to not using open directory?" Whatever the case, OD isn't mandatory with Xsan -- it's just that with multiple user accounts, managing them centrally tends to be easier. For 3 or 4 accounts and 3 or 4 machines maybe it's no big deal. If you go larger, it could get a lot more complicated. That said, if you set it up such that each machine has the exact same set of users (as you said, Mary = UID 502, Fred = UID 503, William = UID 504), then you can do what you want. Mary can log in from multiple machines at the same time, and in general you won't have permissions problems. Of course, if you try and read and write the same file from multiple workstations at the same time, you will get file locking issues, which will prohibit somebody from successfully writing the file.
    File locking issues are different from general permissions errors. The former basically says "hey, someone else is editing this file. Therefore I won't let you edit it right now... you can read it if you want though." Permissions means somebody saves it, and Xsan thinks you saved it and own the file, when you really don't.
    Quad-Core PMG5, 4 GB RAM, 7800 GT, 1 TB disk.   Mac OS X (10.4.4)  

  • How can I create a user with rights to install packages on a publish instance?

    Hi,
    I am trying to create a user with the rights to upload and install content packages on a CQ publish instance and I do not wish to use the admin user.  Simply adding a new user to the administrators group does not seem to be enough.
    I tried adding a rep:GrantACE node through crx de/explorer but it reported the node as locked.  I was able to upload a content package that removed the rep:DenyACE jcr:read for everyone, but this is not safe it seems.
    Is there some special privilege that I need to add to my user/group that will allow them to access the /etc/packages tree or do I just need to add some permission somewhere within the tree.
    Regards,
    Chris

    With some help from David Collie, Alex Klimetschek & Jörg Hoh I have a better idea of what is going on and we've found a solution. 
    It seems that the admin account always works in these scenarios as it has special privileges in the CRX security system; admin can do anything it likes.
    Instead of creating the rep:GrantACE nodes directly, I was able to add a new ACL entry for the administrators group to /etc/packages via the Access Control Editor (http://localhost:4502/crx/explorer/ui/aceditor.jsp?ck=1373027669916&Name=acEditor&Path=%2F etc%2Fpackages&_charset_=utf-8). 
    Strangely, the administrators account already had some inherited rights on this directory that were overridden by the deny|everyone|jcr:read ACL entry on /etc/packages node.  Adding allow:administrators|jcr:read gives any member of that group access to read and write to the /etc/packages. directory.
    Now that I have setup this user we can setup a deploy step in out CI build that does not rely on using the admin account.
    Thanks
    Chris

  • Problem of integrating apex4.1 with bi publisher

    i 'm working on
    linux + 11gR2 apex 4.1 bi 11.1.1.5.0(only installed bi publisher)
    both apex and bi on the same server and same database
    i 'm following this pdf :Integrating Oracle Application Express with BI Publisher
    http://www.oracle.com/technetwork/developer-tools/apex/integrating-apex-with-bi-publisher-169198.pdf
    now i got a problem when login apex using bip's username
    in validate_login function flex_ws_api.make_request always got null
    here is the function :
    create or replace function validate_login(
    p_username in varchar2,
    p_password in varchar2) return boolean
    is
    l_validate varchar2(48);
    l_env clob;
    l_xml xmltype;
    l_ns varchar2(4000) default null;
    l_url varchar2(4000);
    begin
    l_env := '<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:pub="http://xmlns.oracle.com/oxp/service/PublicReportService">
    <soapenv:Header/>
    <soapenv:Body>
    <pub:validateLogin soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
    <userID xsi:type="xsd:string">'||p_username||'</userID>
    <password xsi:type="xsd:string">'||p_password||'</password>
    </pub:validateLogin>
    </soapenv:Body>
    </soapenv:Envelope>';
    l_url := 'http://'||v('BIPUB_SERVER');
    if v('BIPUB_PORT') is not null then
    l_url := l_url||':'||v('BIPUB_PORT');
    end if;
    l_url := l_url||'/xmlpserver/services/PublicReportService';
    l_xml := flex_ws_api.make_request(
    p_url => l_url,
    p_envelope => l_env);
    l_validate := flex_ws_api.parse_xml(l_xml,'//validateLoginReturn/text()',v('NS'));
    if l_validate = 'true' then
    return true;
    else
    return false;
    end if;
    exception when others then
    return false;
    end validate_login;
    ...... what's wrong???
    thx !!!!!
    Edited by: 901181 on 2011-12-7 下午7:32

    In hopes that someone can give me some guidance, I've duplicated the issue on my apex.oracle.com workspace.
    Workspace: NBPERP
    Username: GUEST
    Password: 12summer3
    Application: 464. Report Demo
    Page 1 - a drop down list with submit will show that a query, when run, will return values.
    Shared Component/Report Layout: LAYOUT TESTER - a simple RTF with some unique text that mimics the table shown on page 1.
    Shared Component/Report Query: TEST REPORT - the same query that is being executed on Page 1. If I click into the query and set the bind variable to "Indy" (no quotes) and then Apply Changes, I can download an XML file with the correct data. If I think click "Test Report", I get a "no data found" (unexpected condition #1). If I click back into the query and set the bind variable, click "Test Report", again, I get a "no data found" message (unexpected condition #2).
    Any help/direction on this problem would be much appreciated.

Maybe you are looking for