Dear Verizon, I ask that you please communicate with your customers. We know now that if our iPhone 6 Plus hasn't shipped by now, its not getting to us on 9/19. Will you at least update us on a expected ship date? Sincerely, Everyone.
We call customer service and get told:
There were no iPhone 6 Plus available for a 9/19 ship date.
All iPhone 6 Plus are back ordered until November.
Our system was sold out as soon as the store went live for pre-sale.
If you ordered within the first 10 minutes, most likely a mid October back order date, otherwise November.
I would like someone to tell us what is going on with our orders.
Link to Verizon's iPhone 6 page The 16GB ships 10/28) 64GB ships 11/4) And the 128GB ships as well on 11/4
http://www.verizonwireless.com/b2c/device/smartphone/iphone-6-plus
Similar Messages
-
I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?
Try this repair, ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote, use Appcleaner from Mac Update to do this, its freeware
2 restart the Mac; Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped. -
I'd like to buy an iPhone 4S in France directly from the Apple Store, not from the operators. But, I will go back to my country, Thailand. So, I'm wondering to know that there is an INTERNATIONAL warranty for iPhone, and is it valid in Thailand (warranty). Would it be able to be claimed at the iStudio in Thailand?
There is NO International Warranty for the iPhone. Your best bet is to purchase one in Thailand. If you purchase a phone in France, you will NOT get warranty service on it in Thailand and will have to return it to France (or any EU country) for warranty service.
-
will updating my iphone 5s from 7.1.2 to 8.2 lock it. my phone was initially locked.my friend brought it from usa.i gave a computer vendor rs 5000 and he said he will factory unlock the iphone.so it was unlocked in this way.its not software unlocked nor it is jailbraked.that vendor said that he will factory unlock it.wat i know is that there are some online sites which take some amount (equal to what i paid 50$ )and officially and factory unlock it
so can u plz help me regarding this issue
its working absolutely fine on 7.1.2i am from pakistan
my friend got it unlocked from hyderabad ,there the mobile guy assured us that he will factory unlock it for rs 5000.. he just took the imei number and in 3 days iphone 5s was unlocked. he didnt take the phone so i knew he didnt jailbreak it or did some hacking stuff .. i have the box with me too with all accessories.but my friend doesnt know which carrier to it was locked....as his friend gave it to him from usa
on reading problems on net i just stopped the update via wi fi.fearing it will be locked again :/
but i think its orignal carrieer was At&T -
hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.
Hi vijayanandhtkp,
It sounds like you are getting the Connect to iTunes screen as discussed in this article.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
If so, please check out this article as linked from there.
Use iTunes to restore your iOS device to factory settings - Apple Support
Thank you for using Apple Support Communities.
Nubz -
Please i need help i updated my iphone 3gs and now its not activating
i need help i updated my iphone 3gs and now its not activating
What happens when you try to activate the iPhone?
If there is an error message, what is the exact wording of that message? -
I have some problem .i update my iphone3gs software .software downloaded now its not working .warning select network connect to itunes ..please help me
please help me ?
-
I have an IPhone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with ITunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?
I updated the phone before backing it up on iTunes, now the update wanted me to connect the phone with iTunes and it says the phones in recovery mode and it must be restored before its used with iTunes. I go to click restore and it says it will reset it to factory default and I'll lose all my current data. I have all my sons pictures and videos along with this notes. I can't lose all of this data! Please help!You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod.... -
When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of itines.) This just started a few weeks ago. I've done a system restore on my computer, deleated and reinstalled the 64-bit itunes several times, did a registery clean, rebooted. Nothing seems to work it will not pick up my phone.
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
BT PLEASE listen to your customers!
BT PLEASE LISTEN TO YOUR CUSTOMERS!!!!! BT HomeHub 5 is the worst router I have ever come across in all my years connecting to the Internet. I have tried all your "solutions" to wireless dropping out every few minutes. My hub is showing connection to the internet but wifi is constantly dropping out and judging by searches on Bt site and the Internet most people are having the same problem. Why did you choose to supply customers with an inferior router whilst promoting BT Infinity - the speeds are good but the wifi connection is a major problem. I am sick and tired of ringing for help as your customer advisers are clearly reading off a script. The majority of your customers are long time internet users and have tried all your scripted solutions long before ringing the company - connecting with Ethernet cable, changing channels, resetting router, restarting router etc etc. All I want is an internet connection over wifi that WORKS! Im off now to buy another router and if it works I WILL be contacting BT for the cost of new router as why should I pay for a service which BT cannot supply.
As a new BT customer on infinity I was a bit worried about things that I have read about the Home Hub 5.
I can only speak as I find and I have had no trouble with this router. It has not dropped out at all and the wireless signal is better than the Netgear router that I was using with my previous ISP, and that router was good.
I can get a good signal through two single brick and plaster walls and if I go outside can still get a signal through an aditional brick cavity wall. Something the Netgear could not do.
I have the B version, perhaps you have a faulty router. I will be interested to see if your purchase of a new router cures your problems and so proves your HH 5 faulty. -
when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly
I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
HP Photosmart Premium Fax All in One - C410a
I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print. Since then I've been able to resolve my specific problem.
I
1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found),
2. grabbed the software/driver update from Aug, 2010,
3. installed the Aug, 2010 update, and my problems seem to have been fixed.
This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&... -
Communication Failure: The computer is no longer able to communicate with your printer.
Hello, I have a HP Officejet J6480 All-in-One printer. When I try to print, I receive this error message:
"Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on."
I am using a Mac PowerBook G4, OS v10.5.7. I have tried the following:
-- rebooted my Mac
-- turned printer off/on
-- rebooted wireless router
-- tried to print using USB cable.
I continue to receive the same error message. Helllllllllllllllp!!!!
A couple of other things I need to mention: I bought this printer in June and have been able to print just fine since purchasing
this printer. As recently as Friday, July 3, I was able to print and printed 6 or 7 pages then. This is CRAZY!!!!
Thanks.
Barb
Message Edited by BarbNPhx on 07-05-2009 10:55 AMI'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
HP Photosmart Premium Fax All in One - C410a
I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print. Since then I've been able to resolve my specific problem.
I
1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found),
2. grabbed the software/driver update from Aug, 2010,
3. installed the Aug, 2010 update, and my problems seem to have been fixed.
This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&... -
my ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.
Hi
Thanks for the support but I had already tried this . Again did it as you advised. Still not able to connect the ipad mini with Bluetooth.
Could it be that some app is causing issue. I can connect my car and computer over Bluetooth but not ipad mini.
On the other had ipad is connecting to other iPhone but only not mine.
Still showing ipad not supported message. And also shows not paired.
Please help. -
! just got a new docking system so i plugged it in to my computer because it wasnt the wall charge type, so I put in my ipod, then straight away my screen went white and now its not doing anything! i press the home and lock button nothing happens... then i plug it in my computer it doesnt come up in itunes or even the copmuter. please help i can not live with out my ipod!
Your post is abit confusing, especially on getting those weird messages and emails,( assumed in your Windows machine.)
Most likely you have Restored the iPod using the new Macbook pro, using the same name as that in your Windows machine, hence the duplicate name warning, as it is trying to sync Automatically.
If you are syncing your iPod to both the Mac and Windows, you must set it to Manually Manage Music, in the first machine that you setup iTunes with the iPod. Read thsi Apple Support Article
In iTunes, Preference, tick on Prevent devices syncing automatically
Hopefully your music are still in both your iTunes library,
Connect the iPod to the Mac
Restore it (just to fix any filesystem corruption by the Windows end)
Set it to Manually Manage Music
Sync your selected songs in your library.
Whern sync complete, Eject it
Connect it to your Windows PC.
Select the song in the library
Sync it.
It should work if your ipod Hardisk is not giving any problem.
Good luck! -
The requested URL was rejected. Please consult with your administrator.
I have used this website many times before to register and pay for events - www.liv.asn.au. Today I can only get part of the way through the checkout process before I get a page with message "The requested URL was rejected. Please consult with your administrator. Your support ID is 9025936629427518335."
I have cleared history & cache, relaunced Safari and rebooted the computer. The same problem also if I use Firefox.
There was a similar question posted before but I couldn't follow the fix - sorry!Launch System Preferences and open the Network preference pane. Select your Internet connection from the list on the left (it's the one at the top), and click the Advanced button. In the sheet that opens, select the DNS tab. What are the addresses of your DNS servers?
Next, select the Proxies tab. Are any of the boxes checked? If so, what are the settings?
Close System Preferences and launch the Terminal application. Copy or drag -- do not type -- the line of text below into the window, and press return:
kextstat -kl | awk ' !/apple/ { print $6 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can then quit Terminal.
Maybe you are looking for
-
Created a form in LS but it will only open in most recent version of Acrobat Reader
I've tried opening the PDF form created in LiveCycle into my full professional version of Acrobat and then saving as an optimized version but I get this error.... "This PDF document contains an Adobe XML form. Such files cannot be optimized." There
-
when i am doing mb1c i am getting this error Posting only possible in periods 2014/03 and 2014/02 in company code SAP1 Message no. M7053 please help me
-
Acrobat CS4 under Snow Leopard
hello one and all, just received new CS4 web premium and installed on a new mac pro with snow leopard 10.6.1. printing to the acrobat 9 printer doesn't work. it gets up to asking for the location and filename of the pdf file, the host software send
-
Hi all We have recently upgraded to BI 7.0 and using only 3.x datasource . We are in the process of upgrading our backend R/3 4.6c to ECC6.0. Question: Is there anything that we should be looking out for when we switched to ECC 6.0 on the backend?
-
Essbase Services stops immediatly
Hi all, I just configured Shared Services before trying to start Essbase 11.1.1.3 Server. The service starts but stops immediatly. The log of Essbase is OK. When I look at the Shared Services, I understand that something is wrong but I really don't u