Deauthorizing all machines more than once in a year?

Is it possible to deauthorize all machines more than once in a year? I have had two machines crash and one time I forgot to de-authorize before I installed a new OS.
iTunes tells me I have to wait until June to do this. There has to be a way to manually get someone to agree to do this. Is there a number I can call or process????
tflink
HP Compaq NC8230 Windows XP Pro

No.

Similar Messages

Calling states in a state machine more than once

Hello again,
Is there a way to call a state in a state machine after it has already ran? To elaborate, I have a program that will set pressure in increments of 20% and will then write to a file. Once it is done with the highest pressure state (100%), I want it to repeat the test again, but this time in decrements of 20%. So, it will do:
1. Set pressure at lowest point
2. Read meter and write value
3. Set pressure at 20%
4. Read meter and write value
All the way up to 100%, then:
5. Set pressure at 80%
6. Read meter and write value
7. Set pressure at 60%
8. Read meter and write value
All the way down to the lowest point.
Is there a way to do this instead of making a state for read and writes at each percentage? That way I don't have Read Agilent 20% Increment, Read Agilent 40% Increment, etc.
I've attached the code to help explain what I'm talking about.
Thanks everyone, still a newbie
Solved!
Go to Solution.
Attachments:
Pressure&Measurements.vi ‏58 KB

Yes, everything I described is automatic, no user intervention. ( I edited my post, please review ). As I understand what you are asking, you don't want to have multiple states where the only difference is the multiplier value.
But, you do already have all those states, so you can decide to re-write for flexibility and future expansion, or just index the state enum as described above.
Missed the part about decrementing afterwards. The idea is identical, you have an array that has the values you want in the order you want. If the pattern repeats, then you have to reset the index to start at the beginning after each run.
If you are going up then down, then repeating, I would suggest putting the values in order 20,40 ...100 .... 40, 20, and then repeat that sequence.
Alternatively, you can use an array of the state names as you already have the 20, 40, ... etc... states written.
Mark Ramsdale

TS1292 How come it doesn't show the amount of money there is s gift card? I tried putting in the code more than once, but all it says is that the card has already benn redeemed?

How come it doesn't show how much money there is left in my iTunes gift card? I have tried putting in the code more than once, but all my tablet says is that the card has already been redeemed.

I haven't got access to the server right now (so I can't provide the complete details), but something like 6-700 GB (which is more than it shows in the client time machine windows, but less than what is true (which was around 1,5 TB))

Using firefox 5 - when ever I try to use the same key more than once in a row, it does not work. Hitting the multiple times does nothing at all. How can this be corrected. HELP!!!

everything that needs to be done on the keyboard is effected - letters, numbers, backspace, directionals, delete, home, end, page up, page down, '''all keys that are pressed more than once''' It does not matter what webpage I am on.
PLEASE HELP
this is very frustrating

You may have switched on an accessibility feature called FilterKeys by keeping the Shift key pressed for too long.
* http://www.microsoft.com/enable/products/windowsxp/default.aspx
*http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/access_filterkeys_turnon.mspx?mfr=true

I'm trying to change my secret question because I forgot to answer. Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

I'm trying to change my secret question because I forgot to answer.
Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

See this thread:
https://discussions.apple.com/message/23280567#23280567

In migrating to a 21.3" iMac from a Time Machine backup, can I do this more than once?

In migrating to a 21.3" iMac from a Time Machine backup, can I do this more than once?

David,
My apologies....I was working on questions from a different thread and thought yours was part of that one. Your question is fine where it is....
Now....that being said, I'm afraid I don't know the answer to your question. I know you can exclude certain items from being backed up in Time Machine, which would save disk space on your external drive. But, you'd first have to calculate how much disk space you're using for the different things you want to back up vs. those you want to exclude.
I think it MIGHT be possible to do what you want, but (in my honest opinion) it's a recipe for a LOT of headaches should things not work out as you calculated. Better (again, in my opinion) to just pick up a larger external hard drive and transfer everything as Time Machine was designed.
Just my $0.02 worth.

'PortfolioBacklogs' cannot appear more than once if content model type is "all"

I'm trying to add another level above feature and have followed these instructions https://msdn.microsoft.com/en-us/library/dn217880.aspx
The project is setup as scrum not agile, maybe that is why???, but I get the following error:
'PortfolioBacklogs' cannot appear more than once if content model type is "all"
and haven't been able to find where to change the content model type.

Hi Dckennedy1,
Thanks for your post.
What’s the version of your TFS? TFS 2013 Update 4? Your current team project created using default Scrum 2013.4 process template?  After which step you received this error? You can share your error screenshot(s) here.
I created a new Scrum 2013.4 template team project in my TFS 2013 Update 4 Server, and followed the steps in that document to add Initiatives work item type in my TFS Web Access, the Initiatives work item type be added into portfolios successfully, you can
refer to the below screenshot:
The only difference with steps in that document is I edited the PortfolioBacklogs section as below in my ProcessConfiguration.xml file.
   <PortfolioBacklog category="MyCompany.InitiativeCategory" pluralName="Initiatives" singularName="Initiative">
      <States>
        <State value="New" type="Proposed" />
        <State value="In Progress" type="InProgress" />
        <State value="Removed" type="InProgress" />
        <State value="Done" type="Complete" />
      </States>
      <Columns>
        <Column refname="System.WorkItemType" width="100" />
        <Column refname="System.Title" width="400" />
        <Column refname="System.State" width="100" />
        <Column refname="Microsoft.VSTS.Common.BusinessValue" width="50" />
        <Column refname="Microsoft.VSTS.Scheduling.TargetDate" width="100" />
        <Column refname="System.Tags" width="200" />
     </Columns>
      <AddPanel>
        <Fields>
          <Field refname="System.Title" />
        </Fields>
      </AddPanel>
    </PortfolioBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

CRS Install hostname being used by more than once for the same node.

Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
"You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
Has anyone experienced this error message before and know what the cause is?
Could it be a problem with the /etc/hosts file?
Thanks in advance,
M

Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
Also, the installer may complain if your private and public IPs are configured under the same subnet.
Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
- public name and IP addresses of ALL nodes
- private name and IP addresses of ALL nodes
- VIP name and IP addresses of ALL nodes
Hope that helps
B.

Can you create a form in which its never possible for the same person te sign the form more than once.

Hi, I've been looking into this for awhile and believe the answer is 'no' but was just wondering if anyone here would know of a solution.
The company I work for has a formulier on which a number of Excel files are placed. This form is then sent to a five (often different) people who are then required to open the Excel files and if accord to place their digital signature. We would like to make sure that no one is able to sign the form more than once and also if possible to make sure they have opened the Excel files. It would be great if anyone had any tips...
All the very best,
Martin Angell

I am not an Excel or Excel-to-PDF conversion expert, so I do not know how Excel forms are converted to PDF form fields. With this caveat here's what I do know.
In Acrobat It is possible to create a PDF form in which there are JavaScripts associated with fields (any fields, including signature fields). These JavaSripts can do a lot of things, including checking the signer's certificates on the already signed signature fields. Then you can make all unsigned signature fields read-only, in which case the user will not be able to actually sign them. After that you can overlay a button field on top of each unsigned signature field with exactly the same dimensions and associate a JavaAcript with this button field. This JavaScript would put up an UI asking the user for the signing certificate and its password, check this certificate's CN against the list of already signed signature fields and initiate the signing of the unsigned signature field behind this button if your condition is satisfied.
I never tried that myself but it could work. This looks complicated and it is but if you really want it you can try.

Performance... Why a function column in a view is executed more than once...?

Why a function column created inside a view is executed more than once when called more than once?
EXAMPLE:
create or replace view aux1 as
date_column,
any_function(date_column) column1
from any_table
create or replace view aux2 as
column1 c1,
column1 c2,
column1 c3
from aux1
select * from aux2
It will execute 3 times the function any_function... logically the value will be the same for all columns...
I understand why!... are 3 calls... but...
Why not to create a "small" verification and if the function column was execute replace the second, the third... value? ... instead of execute 3, 4... times...
tks
Braga

Actually, this is more than a performance issue. This is a consistency problem. If the function is NOT deterministic then you may get different values for each call which is clearly not consistent with selecting 3 copies of the same column from a row. Oracle appears to have fixed this in 9i...
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
With the Partitioning option
JServer Release 8.1.7.2.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          93           74
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
With the Partitioning option
JServer Release 9.0.1.3.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          78           78Richard

Why would aperture load more than once?

I understand that when I first load my RAW photos into Aperture it needs to generate a preview and so that's why it slows down and shows me "loading...". If I want to bypass this I can use quick preview mode. That's how I understood it so far. But I don't understand why it would need to load again at a later time? If I browse elsewhere and come back to this project, it'll start loading again. Does Aperture for some reason deletes the preview?

1) How do I force aperture to generate preview for everything, and not one by one. I'd rather go away and let the computer do its thing for a while than get disturbed every time I hop to the next photo.
You can select all images in the Browser and use the command "Photos > Update/Generate Previews" (Update will turn into "Generate", if hold down the ⌥ alt/options key). This way you can generate the previews over night.
2) Also this still doesn't explain why it needs to be done more than once? Why would it generate the preview again if I haven't changed any adjustments etc?
It will only keep and store the preview permanently, if you have enabled the sharing of previews in the "Preferences > Preview" tab. If you do not enable this, Aperture will not store the previews, to save space.

Terminating Event Getting triggered more than once

Hi All,
I am facing a very peculiar problem in PR release workflow(item wise release, business object BUS2009).
One of the requirements of the workflow is to send a mail to PR initiator once it is rejected by any of the approvers(4, in my case). The event associated with the cancellation of the workflow is REJECTION_START.
The problem is that this event is being triggered more than once. One thing that i have observed is that if eg. second level of approver cancels it, the event is triggered twice. Likewise if third level of approver cancels it, it is being triggered thrice. Which leads to sending of 2 and 3 mails respectively to the PR initiators mailbox.
Why is this happening? Ideally, only one event should have been triggered, and the triggering of the event should have been independent of PR approver's level. I am at my wits end regarding this.
Any suggestions in this regard will be highly appreciated
Regards
Varsha Agarwal.

If you check for 2nd level rejjection two release Code is associated so it triggers 2 times and same for 3rd level approval.
I think you have to put some sort of filter using FM SAP_WAPI_WORKITEM_OBJECT
in the attribute portion of yopur custom BO.
The attribjute will check this FM and if it has entries that means already a Workflow has been triggered it should set the flag as X.
Make use of this attribute in defining the start condition of this task thru
SWB_COND.
Thanks
Arghadip

Backups to same DVD more than once

I have just started to use PSE 7 and have moved all my photos into it. I did the initial backup to a DVD but now that I want to backup my new pictures, it seems to want a new DVD. I don't take all that many pictures so it would take me some months fill up a DVD. It doesn't seem to like DVD-R and with DVD-RW, it tells me there is something on the DVD and do I want to erase it. How do I use PSE7 to backup or copy pictures to the same DVD more than once? Thanks.

As far as I know, one can burn contents to a DVD only once...
If you’re using a DVD-RW you have to erase the old contents first...
On can burn a CD several times until filled up though...
You might consider using an external Firewire Hard-drive for your backup...?
Regards
Nolan
PS:
Please check this one out...
http://freeridecoding.com/burnagainfs/
(guess, "Windows" offers something similar...)

Inbound interface was found more than once

Hi All,
Currently I'm working on a scenario wherein an invoice file is generated and created on FTP server, PI system picks up invoice (xml file) and sends to customer via EDI 810. The scenario failed in sxmb_moni and below is the error message.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the inbound interface: Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI Inbound interface was found more than once (for same sender and receiver) for outbound interface
Can anyone help me out and provide some valuable suggestions.
Regards
Faisal

Hi Abdul,
Try to run the scenario in the ID.
There is one test tool to in directory for this, login to ID --> go to Tools --> Test configuration.
This will show you the error in the exact step.
-Supriya.

Custom Administrative Template Error 53 Key name specified more than once

Hi All,
Hope I've picked the correct forum. I am making my first foray into setting up a custom administrative template for some software that is developed in house. The current deployment method is to merge a reg file on each computer that requires the registry
settings. I am trying to set this up so that it is controlled via GPO.
My idea is that in the a GP can set the registry settings for one or more areas that are controlled by the software.
The problem I have - I get Error 53 Keyname specified more than once on Line 9 (second KEYNAME). In total I will have about 30 different sites this needs to be set up for.
Does this mean that I can't set more than one registry key per "Policy" setting in the GPO?
The adm file I have so far is below
TIA
Jason
---------------------------------------------CUT---------------------------------------------
CLASS User
CATEGORY "App Site Settings"
POLICY !!Site1Policy
EXPLAIN !!Site1Explain
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME "SystemDatabase"
VALUEON "D:\\App\\Data\\App.mdw"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME "ConfigPath"
VALUEON "D:\\Site1\\Data"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME "ConfigFile"
VALUEON "D:\\App\\Data\\App_Comms.mdb"
VALUEOFF DELETE
VALUENAME "SysConfig"
VALUEON "D:\\Site1\\Data\\SITE1_SYS.mdb"
VALUEOFF DELETE
END POLICY
POLICY !!Site2Policy
EXPLAIN !!Site2Explain
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME "SystemDatabase"
VALUE "D:\\App\\Data\\App.mdw"
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME "ConfigPath"
VALUE "D:\\Site2\\Data"
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME "ConfigFile"
VALUE "D:\\App\\Data\\App_Comms.mdb"
VALUENAME "SysConfig"
VALUE "D:\\Site2\\Data\\Site2_SYS.mdb"
END POLICY
END CATEGORY
[strings]
Site1Policy = "Site1 settings"
Site1Explain = "Enabling this setting configures the registry settings for dummy Site1."
Site2Policy = "Site2 settings"
Site2Explain = "Enabling this setting configures the registry settings for dummy Site2."

Well - I ended up sorting this out - and no - you can't have the Keyname keyword twice - unless you enclose the the setting in a PART statement. Below is what I ended up with:
---------------------------------------------CUT---------------------------------------------
CLASS USER
CATEGORY "ApplicationSettings"
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
POLICY !!SITE1Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site1\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
POLICY !!SITE2Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site2\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
END CATEGORY
[Strings]
ArbitrationDefault =D:\SITE\Data
ArbitrationPolicy =Arbitration path
ConfigFileDefault =D:\App\Data\App_Comms.mdb
ConfigFilePolicy =Application configuration file
PolicyExplain =Enter Explainition of the Registry settings here
SysConfigDefault =D:\SITE\Data\SITE1_SYS.mdb
SysConfigPolicy =Application site system configuration file
SystemDBDefault =D:\App\Data\App.mdw
SystemDBPolicy =Application system database path
SITE1Policy =Site1 Application Settings
SITE2Policy =Site2 Application Settings

Deauthorizing all machines more than once in a year?

Similar Messages

Maybe you are looking for