Debug and run programs in virtual machine

hi everyone
how are you
i want to know if there is any way to debug and run programs on visual studio to a virtual machine with a specific operating system i`m using visual studio 2013 ultimate in 64 based windows 8.1 system
thanks

but can you explain to me how can i configure remote debugger to run and debug to a virtual machine
You treat the VM as though its any other real machine on your network.
See the article I linked.
im using Vm workstation 11 and windows xp running on it
It's been a while since I used VMWare WS and I have a vague
recollection that it may have some special facility for debugging with
VS - but I never used it.
also i want to know if i can run and debug to another computer on the same network
Yes, you can - if the OS is supported by the version of VS you're
using.
Dave

Similar Messages

  • I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need!  Anybody out there with a similar problem?  Help!

    I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need!  Anybody out there with a similar problem?  Help!

    Thanks - Of Course the first thing I checked and did.
    Disc Utility reads as follows:
    Capacity : 159.18 GB (159,182,127,104 Bytes)
      Format : Mac OS Extended (Journaled)  Available : 11.47 GB (11,472,896,000 Bytes)
      Owners Enabled : Yes  Used : 147.71 GB (147,709,231,104 Bytes)
      Number of Folders : 139,540  Number of Files : 511,832
    Activity Monitor(Disc Usage) shows something quite interesting.  Mac HD and Ramanan (Main User) - My hard drive is only 160GB!  Would the retired engineer gentleman please note as well.  Many thanks. Rams

  • How to run qemu Linux virtual machines properly on android tabs.

    My tab specification's are 1.2 GHz quad core processor and 1 GB ram, 16 GB internal ROM.
    I want to run RHEL 5.0 X86 CLI I mean without any gui on my tab and so I followed the steps below
    At first on windows I have installed qemu manager and after that I have created a virtual machine RHEL with processor option as Pentium 3 and ram option with 256 MB. The installation was successful and I am able to boot properly into it.
    After that I have transferred the installation image to my tab. In order to run the virtual machine I have installed limbo qemu manager. I have selected the transferred image and specified the same options as above.
    When I run the above virtual machine I am unable to boot into my system properly and I getting the following errors
    kernel panic not syncing: kernel compiled for Pentium+ requires TSC feature.
    general protection fault : fffa [#1]
    Kindly suggest how to successfully run the above virtual machine on my tab.
    Regards,
    Rupesh.
    Regards,
    Rupesh.

    You don't say what tablet you have, but all of Lenovo's Android tablets that I know of have ARM processors, not X86 processors, so what you're doing isn't going to work.

  • I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

    I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

    JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process.  You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors you discover to this discussion.

  • HT1338 I have MacBook with OS 10.5.8. Is there any way for me to install and run keynote on this machine? Do I need to upgrade OS and how? Thanks

    I have MacBook with OS 10.5.8
    Is there any way for me to install and run Keynote on this machine? Thanks

    Welcome to the Apple Support Communities
    Keynote '09 is compatible with your computer, but you won't get the latest Keynote version running that version. As you have an Early 2008 MacBook, first I recommend you to update to Mac OS X Snow Leopard to get newer versions of all applications but without losing any applications > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Make a backup before upgrading.
    The DVD contains Mac OS X 10.6.3, so after upgrading, open  > Software Update to update to 10.6.8. Then, you will get access to the App Store.
    However, the Keynote version available in the App Store is only compatible with OS X 10.7.5 or newer, so now you have two options:
    1. Upgrade to OS X Lion and purchase Keynote from the App Store.
    2. Keep Mac OS X Leopard or Snow Leopard, and buy Keynote on a DVD in eBay or Amazon. Note that you won't be running the most recent Keynote version, but it doesn't mind (the latest version only adds iCloud support)

  • Windows O/S running in the virtual machine has frozen does not want to shut down

    Our old Windows-based PC is a virtual machine on our iMac (it is accessed using VMWare Fusion 2). The Windows XP Home Edition O/S froze when booting, and cannot be shut down by sending a Ctrl-Alt-Del or Force Quitting VMWare Fusion. Putting the iMac in Sleep mode or restarting it makes no difference.  The virtual machine is still in a suspended state, and there appears to be no way of either getting it to finish booting the Windows O/S or shutting it down.  Any ideas as to how to unfreeze it?  At this point in time, all I want to do is get back into the Windows side, rescue any data files I need, and stop using the virtual machine.

    VMware Fusion issues should be posted in the VMware Fusion forums:
    http://communities.vmware.com/community/vmtn/desktop/fusion?view=discussions
    That said, you can "Force Shut Down" a virtual machine by holding down the Option key, then clicking on the Virtual Machine Menu.  "Shut Down" becomes "Force Shut Down".
    More than likely what you'll need to do is hold the Option key, then choose "Force Restart" to get Windows to boot again.  Then use "Force Shut Down" to power off the VM, if a normal shut down does not work after that.  Do NOT close the VM window, or put the Mac to sleep as this will initiate another suspend procedure.

  • How to Allow microphone and all hardware in Virtual Machine using Hyper-v

    I have recently installed Windows 10 preview in Windows 8.1 pro.
    How i can allow Microphone and all things in virtual machine from Hyper-v
    Thanks
    Thank You , Shan Ali Khan

    You connect to the VM using the RDP Client - connecting to the IP / name of the VM over the network.
    This enabled all device redirection by default.
    You can possibly use Enhanced Session Mode as well.  That again uses RDP under the hood.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • Regarding Debug and Run Settings in Openscript Developer perspective

    hi,
    I want to debug and run the script.so i inserted the breakpoints. and when i try to debug and run it will ask to select the main type like AESCrypt-oracle.oats.utilties etc. so i don't know which file to select to display my output for the script in Console mode.
    What's the exact procedure to debug the script so that i can check where in the script line getting the problem?

    Hi
    If you like to learn how to use eclipses debuging techniques I suggest you look at this document. However unless you have a lot of costume java code in your script i would not recommend you doing so, from 9.10 you have a debugger in the OpenScript UI, you can just right click on the line that you like to add a Breakpoint and select Add breakpoint, then use the arrow keys to step trough the script.
    You can output information to the console by calling this line of code:
    getLogger().info("someMessage");
    Regards
    Alex

  • SAP Content Server can be installed and supported on a Virtual Machine

    Hi,
    I would like to know if the SAP Content Server can be installed and supported on a Virtual Machine.
    Are there any sap notes to support this.
    Regards,
    Rajiv

    SAP support VMWARE
    MAXDB support VMWARE.
    you are free to go.
    I would ask this question in the SAP on VMWARE group at Virtualization on Windows
    close message here when you created the message in the proper forum.

  • My MAC Mini requires reentering password after an unspecified time and running programs are interrupted

    My MAC Mini at unspecified times switches to require reentering the password  and running programs are interrupted.
    I do not find a way in Preferences to correct this.  Software  OS X 10.9.5 (13F34)

    From the menu bar, select
               ▹ System Preferences... ▹ Security & Privacy
    If there's a closed padlock icon in the lower left corner of the preference pane, click it and enter your login password when prompted.
    Click the Advanced button and, in the sheet that opens, uncheck the box marked
              Log out after … minutes of inactivity

  • L How many are running trials on Virtual Machines and under what software

    I'm just curious here -- I'm not sure if this Forum has something like a POLL but I'm interested in what type of Virtual Machine setups people are using.
    I'd like to know HOST OS (RAM size) , Guest OS (Ram size),  ABAP trial / JAVA trial / both, Virtual machine software (Vmware, Parallels, Virtual Box, Virtual PC or other).
    Indication of stability, and how good the ABAP / JAVA trial performance is on the VM's as well.
    Thanks in advance to anybody answering these questions for taking the time.
    Cheers
    jimbo

    I am running the previous (SP11) version under Vmware Workstation 5.5.3 with XP SP2 on XP SP2.  The machine is a Dell 9300 laptop with 2GB.  I give the vm 1GB.  The machine is still happy to run its usual load of about 10 other applications (word, Freemind, Thunderbox, Firefox, SAPGui, etc.)  I don't run sapgui in the vm, I run it at the host level.  I stick with ABAP.  I am still hoping Java will go back to controlling dishwashers and toasters like the Good Lord originally intended.
    It runs well in its gig.  I am presently monkeying around with WebDynpro and it performs beautifully.  Stability has been good except it hangs occasionally if I leave it all running when I suspend the host.  I suspect this has to do with network issues.  I make a point of shutting down the guest before I shut the lid.
    I am going to activate autostart in the start profile so that the SAP system starts up when the vm boots.  That way I don't even have to log into it.

  • The Debug and Run Butons

    I am a new user of FLEX 2, and would appreciate your
    assistance.
    When clicking on either the Debug or Run button, I get a
    Window pop-up message of "Windows - No Disk" with the following
    message; "There is No Disk in Drive. Please Insert a Disk Into
    Drive".
    The Flex program and the Pop Up Window freeze. The only way
    to close them is is by Ctrl-Alt-Del.
    Thanks...Daniel

    but can you explain to me how can i configure remote debugger to run and debug to a virtual machine
    You treat the VM as though its any other real machine on your network.
    See the article I linked.
    im using Vm workstation 11 and windows xp running on it
    It's been a while since I used VMWare WS and I have a vague
    recollection that it may have some special facility for debugging with
    VS - but I never used it.
    also i want to know if i can run and debug to another computer on the same network
    Yes, you can - if the OS is supported by the version of VS you're
    using.
    Dave

  • How do I run a Windows virtual machine?

    I have a program for my research (Scigress) that only runs on Windows. I would like to be able to run the program on my Mac, I assume the best way to do that is to run a virtual machine. I don't want to run Windows all the time, since I strongly dislike Windows. Is there a way to do this in which I can turn Windows off as soon as I'm done with that program? What would be the best way to do this, or the best app to use? I have a 2009 Macbook with Lion installed.

    I apologize, dragon. I didn't fully read your post well before opening my mouth. Sorry, "the ADD" has me (even as a grown man).
    You have really two fundamental choices here on where you could take this. My primary concern above all would be "how resource intensive is this Windows software"? I mean, is it like a CAD or other 3D modeling app or otherwise just... monster? Working in the tech field I have seen CAD programs opening a complex drawing nearly bring say... a dual Xeon, 16GB RAM, 2-4GB of VRAM with cards in tandem (Crossfire or SLI in the PC world, I don't know if it's called the same over here)... but it would literally freeze these beasts of workstations solid for 5-20 minutes while opening and rendering some of these mind-blowing CAD drawings (talented guys, no way I could manage to create some of those 3D models of such just... complexity... in a virtual environment).
    So-- with that being said, that's worst case scenario on the software. That would pretty much really cripple your luck with virtualization/emulation of a guest OS (that is, the operating system that is running "under the command") of the main one you're running.
    If the program is not that kind of one, it would certainly be more convenient to you to just literally almost open "Windows" like it's just another app, literally... and close it/shut it down as soon as you're done, leaving your other OS X desktop work up and running.
    If it *is* going to be a resource hog, then your second option is Boot Camp, which I'm sure you've heard of... You basically split the hard drive (partition it) into two segregated areas of storage and literally you can run either/or and utilize the full power of the machine this way, as you're not sharing CPU/memory. The downside, as sort of mentioned-- is that you have to boot into one or the other, it's not a "program" like the other is, almost; so you'd have to "shut down" or use the little utility app at least to reboot into OS X.
    Think about your circumstances and take a look at that article comparing or also research Allan's suggestion, that is a new one to me. That will at least get you familiar with what the "experience" of virtualizing operating systems is like... then let us know what you think is best and we can go from there and help you. Sorry about jumping the gun earlier. Hope I made up for it with an abundance of information at least the second time...

  • Connectivity to Test Controllers and Test Agents in virtual machine

    Hi,
    I’m setting up the load test infrastructure- configured test controller and test agent on skytap virtual machine (which is windows server 2012). I have configured as below:
    The load tests exist on my machine (TFS 2013) , in test settings I selected – Local execution with remote collection, tried with selecting remote execution, selected the controller, the status shows as connected to controller: ‘XXXXXXXXXXX:6901’
    I have configured the test controller ( TC 2013 )  for load testing, specified logon account as – Local system, since I’m not connecting the TFS in my virtual machine I skipped the Team Project Collection part. The load test database (SQLExpress)
    is connected.
    The Text Agent (TA 2013) also exists on the same virtual machine and is registered with controller. The test agent is running as service , logon as – Network service
    I had checked the services, admin users on my machine and virtual machine, made the firewall exceptions, tried disabling the firewall too, checked the config files for QTController and QTTest Agent(C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE)
     for port 6901, I can ping my machine( IP or with DNS) to Virtual machine ( vice versa). I also tried to set the logging – verbose for all TA, TC , devenv config ( however, I could see any logs).
    The machines are in same domain and port 6901 is accessible from local machine.
    When I try to run my load test from my machine it gives the below error:
    Error:     Failed to queue test run 'LoadTests (2015-01-22 15:04:00)': A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host
    has failed to respond.             
    I tried troubleshooting with all the online help available, could not find a solution.
    Please help on this.
    Dhillon_H

    Hi Tina-Shi
    Thank you for the response. Please see below my findings and the logs
    - There were no errors while configuring TC, TA on VM , only warnings as below:
    Since you have not configured lab service account, make sure a) test agent can communicate with the test controller, b) test controller and test agent can access the build drop location, and c) Microsoft Test Manager can connect to the test controller
    during manual test runs. Manual steps might be needed to setup the permissions mentioned above.
    -The test Agent is ready status in the Manage Test Controllers Window in the local.testsetings file.
    - The load tests run successfully when I select local execution.
    - I have referred the links mentioned , couldn't find the solution, also sending some content from logs I have on the VM machine where my TC, TA exist.
    - Also, I’m the admin on my TFS machine and VM .
    - TC configuration – as Local system , TA configuration- as network service.
    VSTTAgent.log
    I, 4988, 41, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTAgentService.exe, AgentService: Connecting to controller. Using AgentName: XXXXX-XXX-XXXX : Domain : DEVOP.Xxxxx-xxx-xxxx.com
    V, 4988, 32, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentService: calling AgentObject.Hello
    V, 4988, 32, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
    V, 4988, 32, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'DataCollectionEnvironmentContext' on the data collection agent
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'DataCollectionEnvironmentContext' on the data collection agent
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'DataCollectionEnvironmentContext' on the test agent
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'DataCollectionEnvironmentContext' on the test agent
    I, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentService: Successfully connected to controller.
    V, 4988, 41, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentStatusAggregator.ControllerConnected: Connection to controller XXXXX-XXX-XXXX:6901 has been established.
    V, 4988, 44, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'SetAgentDataCollectorInformation' on the controller
    V, 4988, 44, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'SetAgentDataCollectorInformation' on the controller
    EqtTraceAgent.log
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, Agent XXXXX-XXX-XXXX: created Controller Event Sink
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: starting state machine on different thread.
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): SetNextState Online called
    V, 568, 7, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): In state Online. Waiting for state change...
    V, 568, 7, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): Exit wait for state change, current state is Online.
    V, 568, 7, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): Uninitialized => Online
    V, 568, 7, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): calling state handler for Online
    V, 568, 7, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, StateMachine(DataCollectionAgentState): In state Online. Waiting for state change...
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectorWatcher: DataCollectorDiscoveryPeriod set to: 5000
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectorWatcher.Start: Starting to watch for changes in the data collector files.
    V, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: constructor is done, success.
    I, 568, 1, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentProcess: Calling into AgentService to register the agent.
    V, 568, 8, 2015/01/23, 12:28:31.395, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectorCache.ForceCacheUpdate: Performing data collector discovery.
    I, 568, 1, 2015/01/23, 12:28:31.411, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentProcess: Successfully registered data collection agent process.
    I, 568, 1, 2015/01/23, 12:28:31.411, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentProcess: waiting for shutdown notification.
    V, 568, 8, 2015/01/23, 12:28:32.192, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectorCache.ForceCacheUpdate: Done performing data collector discovery.
    V, 568, 10, 2015/01/23, 12:28:32.458, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: Hello.
    V, 568, 10, 2015/01/23, 12:28:32.458, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionEnvironmentContext: Adding Agent Process URI ipc://eqt-f0f6cfb9-454f-4e8a-c857-170546772b6e/
    V, 568, 25, 2015/01/23, 12:38:33.345, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: Hello.
    V, 568, 25, 2015/01/23, 12:38:33.345, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionEnvironmentContext: Adding Agent Process URI ipc://eqt-f0f6cfb9-454f-4e8a-c857-170546772b6e/
    V, 568, 33, 2015/01/23, 12:48:32.667, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: Hello.
    V, 568, 53, 2015/01/23, 12:48:32.667, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionEnvironmentContext: Adding Agent Process URI ipc://eqt-f0f6cfb9-454f-4e8a-c857-170546772b6e/
    V, 568, 54, 2015/01/23, 12:58:33.943, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionAgentObject: Hello.
    V, 568, 54, 2015/01/23, 12:58:33.943, XXXXX-XXX-XXXX\QTDCAgent32.exe, DataCollectionEnvironmentContext: Adding Agent Process URI ipc://eqt-f0f6cfb9-454f-4e8a-c857-170546772b6e/
    EqtTraceController.log
    V, 2608, 20, 2015/01/23, 13:08:10.287, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: Hello
    V, 2608, 20, 2015/01/23, 13:08:11.302, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    I, 2608, 20, 2015/01/23, 13:08:11.302, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: Creating ControllerExecution for TestRun 9f0e53e4-09da-40f4-90d8-01bdaeec7365
    I, 2608, 20, 2015/01/23, 13:08:11.318, XXXXX-XXX-XXXX\QTController.exe, ControllerSpooledJob: creating spooled job for test run 'LoadTests (2015-01-23 13:08:08)'
    I, 2608, 20, 2015/01/23, 13:08:11.318, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: Queuing TestRun 9f0e53e4-09da-40f4-90d8-01bdaeec7365
    V, 2608, 22, 2015/01/23, 13:12:54.566, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 22, 2015/01/23, 13:12:54.566, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: AgentHello from XXXXX-XXX-XXXX
    V, 2608, 22, 2015/01/23, 13:12:54.566, XXXXX-XXX-XXXX\QTController.exe, Verifying the connection integrity for following number of objects: 1
    V, 2608, 24, 2015/01/23, 13:17:54.596, XXXXX-XXX-XXXX\QTController.exe, Agent : NT AUTHORITY\NETWORK SERVICE
    V, 2608, 24, 2015/01/23, 13:17:54.596, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 24, 2015/01/23, 13:17:54.596, XXXXX-XXX-XXXX\QTController.exe, User NT AUTHORITY\NETWORK SERVICE is in group TeamTestAgentService.
    I, 2608, 24, 2015/01/23, 13:17:54.596, XXXXX-XXX-XXXX\QTController.exe, A user has successfully authenticated to obtain the ControllerObject.
    V, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.ConnectAgent: Agent: XXXXX-XXX-XXXX from machine: xxxxx-xxx-xxxx.DEVOP.Xxxxx-xxx-xxxx.com trying to connect.
    V, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, User NT AUTHORITY\NETWORK SERVICE is in group TeamTestAgentService.
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, AgentDomainTrusted : Controller Domain DEVOP.Xxxxx-xxx-xxxx.com Agent Domain DEVOP.Xxxxx-xxx-xxxx.com
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, AgentDomainTrusted : Same domain DEVOP.Xxxxx-xxx-xxxx.com
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.ConnectAgent : Ignoring the identity
    V, 2608, 27, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, Successfully verified connection for agent XXXXX-XXX-XXXX
    I, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, AgentManager: Agent 'XXXXX-XXX-XXXX' successfully connected.
    V, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, Verifying the connection integrity for following number of objects: 1
    V, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.ConnectAgent: Agent: XXXXX-XXX-XXXX Returning.
    V, 2608, 24, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 29, 2015/01/23, 13:19:13.442, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    I, 2608, 29, 2015/01/23, 13:19:13.442, XXXXX-XXX-XXXX\QTController.exe, A user has successfully authenticated to obtain the ControllerObject.
    V, 2608, 28, 2015/01/23, 13:19:14.114, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: Hello
    V, 2608, 28, 2015/01/23, 13:19:14.364, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    V, 2608, 28, 2015/01/23, 13:19:16.270, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    V, 2608, 28, 2015/01/23, 13:19:16.489, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    V, 2608, 32, 2015/01/23, 13:22:54.593, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 32, 2015/01/23, 13:22:54.593, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: AgentHello from XXXXX-XXX-XXXX
    V, 2608, 32, 2015/01/23, 13:22:54.593, XXXXX-XXX-XXXX\QTController.exe, Verifying the connection integrity for following number of objects: 1
    VSTTController.log
    V, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, User NT AUTHORITY\NETWORK SERVICE is in group TeamTestAgentService.
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, AgentDomainTrusted : Controller Domain DEVOP.Xxxxx-xxx-xxxx.com Agent Domain DEVOP.Xxxxx-xxx-xxxx.com
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, AgentDomainTrusted : Same domain DEVOP.Xxxxx-xxx-xxxx.com
    I, 2608, 23, 2015/01/23, 13:17:55.877, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.ConnectAgent : Ignoring the identity
    V, 2608, 27, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, Successfully verified connection for agent XXXXX-XXX-XXXX
    I, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, AgentManager: Agent 'XXXXX-XXX-XXXX' successfully connected.
    V, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, Verifying the connection integrity for following number of objects: 1
    V, 2608, 23, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.ConnectAgent: Agent: XXXXX-XXX-XXXX Returning.
    V, 2608, 24, 2015/01/23, 13:17:55.893, XXXXX-XXX-XXXX\QTController.exe, ControllerObject.RequireAgentServiceUser: Agent: XXXXX-XXX-XXXX of environment [Default] trying to connect.
    V, 2608, 29, 2015/01/23, 13:19:13.442, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    I, 2608, 29, 2015/01/23, 13:19:13.442, XXXXX-XXX-XXXX\QTController.exe, A user has successfully authenticated to obtain the ControllerObject.
    V, 2608, 28, 2015/01/23, 13:19:14.114, XXXXX-XXX-XXXX\QTController.exe, ControllerObject: Hello
    V, 2608, 28, 2015/01/23, 13:19:14.364, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    V, 2608, 28, 2015/01/23, 13:19:16.270, XXXXX-XXX-XXXX\QTController.exe, User XXXXX-XXX-XXXX\dhilloha is system, Admin, or controller user
    V, 2608, 28, 2015/01/23, 13:19:16.489, XXXXX-XXX-XXXX\QTController.exe, User xxxxxxxx\dhilloha is system, Admin, or controller user
    Thanks you for looking into this.
    Dhillon_H

  • Can not see a sbRIO in MAX running on a virtual machine

    I am trying to connect a sbRIO-9606 to a Windows 7 virtual machine (VMWare) running on a MacPro.  I can open a CMD prompt and ping the sbRIO but when I run MAX, it does not appear in Remote Systems.
    The virtual NIC is bridged to the pyhsical one (on the MAC) 
    Does anyone have experience doing this, or know why I cannot see the sbRIO?

    Hi jaketc,
    I've had similar issues at times depending on how my host and guest operating sytems network interfaces are configured.  It sounds like your settings are correct (bridged), but it is difficult to guarantee.  The first step I usually take is disable any network interfaces (on the host and guest OS) that are not critical to connecting to the remote target.
    A more generic answer is to walk through the troubleshooting steps in this document, but it won't cover the virtualized OS considerations of your setup:  
    Why Does My CompactRIO Controller or Single-Board RIO Not Show Up in Measurement & Automation Explor...
    Because you can ping the target, it sounds like the Single-Board RIO already has an IP address, you know what it is, and ethernet communication can be established.  When I've been in that situation in the past, I've been able to manually add the RIO target to MAX.  To find a system that is already configured with an IP address, simply right-click on Remote Systems and select Create New. Enter the appropriate configuration information in the dialog box, and MAX will manually place that system in the Remote Systems listing and all tasks will function properly.
    Cheers,
    Spex
    National Instruments
    To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

Maybe you are looking for

  • Problem Creating a query for a hierarchical tree. [using connect by prior]

    Hi all, I have 2 tables. box (box_id, box_name) item(item_id, item_name, box_id) In a box there are several items. I want to create a hierachical tree to display items that are present in each box. LIKE: |---BOX1 | |----ITEM 1 | |----ITEM 2 | |---BOX

  • Missing IDoc and recurring IDoc errors

    Hi, I would like to ask for a help or any ideas on below case. We encountered almost everyday a number of generated IDoc errors and the number increases everyday. All of these IDocs has Status "51" (application document not posted) and  description "

  • How to install pdf files and read them in nokia 63...

    tried copyin pdf file in nokia 6300 and tried opening it d phone..but it came as file format not supported..help me..

  • Can't Get Up The Ladder! (help)

    I seem to have hit a wall in setting up a very basic ladder/voting system. It appears to be working properly (a single choice can indeed be moved along and voted for and reach the final spot) BUT the variables are being reset on each page reload so t

  • Is "text" feature available for Adobe Touch yet?

    I'm an avid fan of adobe for years. Please add in the feature of "text" annotation for adobe touch. Other apps already have this feature, and it would be disappointing to shift to another app because of this minor flaw. i'm currently using windows su