Debug in sql server 2012

Hi,
I have 3 sql server (2005,2008,2012) In 2005 and 2008 remote debug (from sql management studio installed on the client) works without problems.
In sql 2012 debugging only works on sql management studio installed locally, why?
The server 2012 and the client are in the same domain, and both have the firewall disabled
to connect to all 3 I always use the same sql server management studio 2014
thanks!

Hi matti157,
As your description, you fail to use remote T-SQL Debugger in the instance of SQL Server 2012. Please help to post the error information here for analysis. Based on my research, the issue could be due to the RPC or authentication issue. You could pay attention
to the points below to troubleshoot your issue.
1.It is recommended to verify if the configuration of the T-SQL Debugging  was done correctly. To verify that, you can follow the steps from the link:
http://msdn.microsoft.com/en-us/library/cc646024(v=sql.100).aspx
2.Verify if the SQL Server Management Studio was started with Administrator permissions (Run as Administrator);
3.Verify if the account used to connect remote to T-SQL Debugger has the right of ‘sysadmin’ on SQL Server Instance and if it is in the Local Administrators Windows Group
4.Verify if the following services are started:
a.TCP/IP NetBIOS Helper;
b.Remote Registry;
c.RPC Service;
5.Verify if DCOM is active on the server and client. To do  that please follow the steps described in the link:
http://technet.microsoft.com/en-us/library/cc771387.aspx.
6.If you have intermediary devices between SQL Server and client, it is absolutely necessary to configure on this devices the  necessary rules and ports , so the communication between the SQL Server and the client not to be blocked;
7.To verify if you have any issues with the permissions at DCOM level, you can activate the DCOM logging using the following link:
http://support.microsoft.com/kb/892500.  To verify if the DCOM works fine you can do the test from the following article
http://support.microsoft.com/kb/259011/en-us.
For more information about the process, please refer to the article:
http://blogs.technet.com/b/beatrice_popa/archive/2012/11/28/quot-unable-to-start-t-sql-debugging-could-not-attach-to-sql-server-process-on-databasename-the-rpc-server-is-unavailable-quot.aspx
Regards,
Michelle Li

Similar Messages

  • Debugging stored procedure in SQL Server 2012

    Hi,
    Please I need your help.
    I used to debug stored procedures in SQL server 2008, 2008 R2. I'm debugging the stored procedure using SQL Server management studio. I just create a break point then I click on the debug button
    and start debugging without any problems.
    I'm talking about my local machine which I have administrator privileges on the machine. My account in the administrators group and I'm assigned in the sysadmin role in SQL server but I couldn't
    debug the stored procedure. When I create a break point and try to debug the stored procedure I'm getting a popup screen saying "To continue debugging, the firewall needs to be configured. Configuring the firewall requires privileges."
    I tried to figure out the issue but unfortunately until now I'm not able to resolve it.
    Thanks. 

    The problem resolved with help of Microsoft support but it was really strange situation.
    First, the following is my environment.
    OS is Windows 8 Pro
    SQL Server 2012
    I did try everything firewall, Anti-Virus and other thing as well. I usually type (local) on the server name TextBox. I did close my Anti-Virus program, turn off windows firewall and run SQL server as administrator but I’m still
    unable to debug.
    I just do one thing and one thing only, changed the (local) on the server name TextBox to the actual server name and everything work fine. I did try that with everything close/open my Anti-Virus program, turn
    off/one windows firewall and still work fine, and I was able to debug any T-SQL in SQL server 2012 but run it as administrator.
    Anyway, I’m happy to back on the road again.
    Thank you every single one of you who try his best to help.
    Cheers.

  • Unable to run sql server 2012 setup

    Hi All,
      I installed SharePoint 2013 on Application Server and Database(Sql Server 2012) on another server. But for reporting application I need to install some components of SQL on Application Server as well. When I try to run the installer it crashes and
    shows this below dialog box. 
    When I debug this I get the below error.
    I saw some suggestions saying it won't work with Remote Desktop so directly connected the monitor to the server and tried to install but nothing works again. Let me know if I am doing anything wrong.
    Thanks,

    Hi,
    Did you install the .net framework 4.0?
    Meanwhile, for the SQL issue, i think you may ask in SQL forums:
    http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
    Regards.
    Vivian Wang

  • Error while install sql server 2012 using powershell

    hello all,
    I am using below function to install sql server and its not working  can some one help me please 
    Function Install-Sql2012
    param
    [Parameter()][string]  $Path ,#= (read-host "Enter Installation Binary Path"),
            [Parameter()][string]  $AddSSIS= (read-host "Do u need SSIS Enter 1 for yes o for no") ,
            [Parameter()][string]  $AddSSRS= (read-host "Do u need SSRS Enter 1 for yes o for no") ,
    [Parameter()][string]  $InstanceName = (read-host "Enter Instance name"),
    [Parameter()][string]  $ServiceAccount= (read-host "Enter Service Account"),
    [Parameter()][string]  $ServicePassword= (read-host -assecurestring "Enter Service Account Password") ,
    [Parameter()][string]  $AgentAccount=(read-host "Enter Agent Account"),
    [Parameter()][string]  $AgentPassword=(read-host "Enter Agent pasword"),
            [Parameter()][string]  $Backuppath= (read-host "Enter Backuppath"),
    [Parameter()][string]  $SaPassword= (read-host -assecurestring "Enter SA Account Passowrd"),
            [Parameter()][string]  $SQLTEMPDBDIR= (read-host  "Enter TempDir"),
            [Parameter()][string]  $SQLUSERDBDIR= (read-host  "Enter User Data Directory"),
            [Parameter()][string]  $SQLUSERDBLOGDIR= (read-host  "Enter User Log Directory"),
    #[Parameter(Position=5,Mandatory=$false)][string] $LicenseKey,
    [Parameter()][string]  $SqlCollation = "SQL_Latin1_General_CP1_CI_AS",
    [Parameter()][switch]  $NoTcp,
    [Parameter()][switch]  $NoNamedPipes
    #Build the setup command using the install mode
    if ($Path -eq $null -or $Path -eq "")
    #No path means that the setup is in the same folder
    $command = '.\setup.exe /Action="Install"'
    else
    #Ensure that the path ends with a backslash
    if(!$Path.EndsWith("\"))
    $Path += "\"
    $command = $path + 'setup.exe /Action="Install"'
    #Accept the license agreement - required for command line installs
    $command += ' /IACCEPTSQLSERVERLICENSETERMS'
    #Use the QuietSimple mode (progress bar, but not interactive)
    $command += ' /QS'
    #Set the features to be installed
    #$command += ' /FEATURES=SQLENGINE,CONN,BC,SSMS,ADV_SSMS'
        If ($AddSSIS -ne '0' -and $AddSSIS -ne '1') {
            throw 'Invalid input. Enter a valid value for SSIS.'
        If ($AddSSRS -ne '0' -and $AddSSRS -ne '1') {
            throw 'Invalid input. Enter a valid value for SSRS.'
       if ($AddSSIS -eq 1 -and $AddSSRS -eq 1)
           $command += ' /FEATURES=SQLENGINE,CONN,BC,SSMS,ADV_SSMS,SSIS,SSRS'
       if ($AddSSIS -eq 1 -and $AddSSRS -eq 0)
       $command += ' /FEATURES=SQLENGINE,CONN,BC,SSMS,ADV_SSMS,SSIS'
       if ($AddSSIS -eq 0 -and $AddSSRS -eq 1)
       $command += ' /FEATURES=SQLENGINE,CONN,BC,SSMS,ADV_SSMS,SSRS'
       if  ($AddSSIS -eq 0 -and $AddSSRS -eq 0)
       $command += ' /FEATURES=SQLENGINE,CONN,BC,SSMS,ADV_SSMS'
    #Set the Instance Name
    $command += (' /INSTANCENAME="{0}"' -f $InstanceName)
    #remove Set the License Key only if a value was provided, otherwise install Evaluation edition
    #if ($LicenseKey -ne $null -and $LicenseKey -ne "")
    # $command += (' /PID="{0}"' -f $LicenseKey)
        #set reporting to off
        $command += ('/SQMREPORTING="0"')
        #Add Browser Account 
        $command +=('/BROWSERSVCSTARTUPTYPE="Disabled"')
        #Add Backup path 
        $command +=('/SQLBACKUPDIR="{0}"' -f $backuppath)
    #Check to see if a service account was specified
    if ($ServiceAccount -ne $null -and $ServiceAccount -ne "")
    #Set the database engine service account
    $command += (' /SQLSVCACCOUNT="{0}" /SQLSVCPASSWORD="{1}" /SQLSVCSTARTUPTYPE="Automatic"' -f $ServiceAccount, $ServicePassword)
    #Set the SQL Agent service account
    $command += (' /AGTSVCACCOUNT="{0}" /AGTSVCPASSWORD="{1}" /AGTSVCSTARTUPTYPE="Automatic"' -f $AgentAccount, $AgentPassword)
    else
    #Set the database engine service account to Local System
    $command += ' /SQLSVCACCOUNT="NT AUTHORITY\SYSTEM" /SQLSVCSTARTUPTYPE="Automatic"'
    #Set the SQL Agent service account to Local System
    $command += ' /AGTSVCACCOUNT="NT AUTHORITY\SYSTEM" /AGTSVCSTARTUPTYPE="Automatic"'
    #Set the server in SQL authentication mode if an SA password was provided
    if ($SaPassword -ne $null -and $SaPassword -ne "")
    $command += (' /SECURITYMODE="SQL" /SAPWD="{0}"' -f $SaPassword)
    #Add current user as SysAdmin
    $command += (' /SQLSYSADMINACCOUNTS="test\ADMIN"')
        #Add Tempdbdata path
    $command += (' /SQLTEMPDBDIR="{0}"' -f $SQLTEMPDBDIR)
        #Add Tempdblog path
        $command += (' /SQLTEMPDBLOGDIR="{0}"' -f $SQLTEMPDBDIR)
         #Add UserDBdata path
        $command += (' /SQLUSERDBDIR="{0}"' -f $SQLUSERDBDIR)
         #Add UserDBlog path
        $command += (' /SQLUSERDBLOGDIR="{0}"' -f $SQLUSERDBLOGDIR)
    #Set the database collation
    $command += (' /SQLCOLLATION="{0}"' -f $SqlCollation)
    #Enable/Disable the TCP Protocol
    if ($NoTcp)
    $command += ' /TCPENABLED="0"'
    else
    $command += ' /TCPENABLED="1"'
    #Enable/Disable the Named Pipes Protocol
    if ($NoNamedPipes)
    $command += ' /NPENABLED="0"'
    else
    $command += ' /NPENABLED="1"'
    if ($PSBoundParameters['Debug']) 
    Write-Output $command
    else
    Invoke-Expression $command
    Install-Sql2012
    Below is the error i am getting 
    PS C:\temp\in> .\Install-Sql2012.ps1
    Do u need SSIS Enter 1 for yes o for no: 0
    Do u need SSRS Enter 1 for yes o for no: 0
    Enter Instance name: MSSQLSERVER
    Enter Service Account:
    Enter Service Account Password:
    Enter Agent Account:
    Enter Agent pasword:
    Enter Backuppath: "C:\Temp\IN\bck"
    Enter SA Account Passowrd: **********
    Enter TempDir: "C:\Temp\IN\bck"
    Enter User Data Directory: "C:\Temp\IN\bck"
    Enter User Log Directory: "C:\Temp\IN\bck"
    Microsoft (R) SQL Server 2012 11.00.2100.60
    Copyright (c) Microsoft Corporation.  All rights reserved.
    The following error occurred:
    Instance name is limited to 16 characters. Yours 'MSSQLSERVER/SQMREPORTING=0/BROWSERSVCSTARTUPTYPE=DISABLED/SQLBACKUPDIR=C:\TEMP\IN\BCK' is 85.
    Error result: -2054422513
    Result facility code: 1420
    Result error code: 15
    Please review the summary.txt log for further details
    Thanks,
    Ashwin.
        

    Line 94, 97 and 100 appear to not have spaces at the beginning of each string, which could cause some issues:
    #set reporting to off
    $command += ('/SQMREPORTING="0"')
    #Add Browser Account
    $command +=('/BROWSERSVCSTARTUPTYPE="Disabled"')
    #Add Backup path
    $command +=('/SQLBACKUPDIR="{0}"' -f $backuppath)
    Probably should be this:
    #set reporting to off
    $command += (' /SQMREPORTING="0"')
    #Add Browser Account
    $command +=(' /BROWSERSVCSTARTUPTYPE="Disabled"')
    #Add Backup path
    $command +=(' /SQLBACKUPDIR="{0}"' -f $backuppath)
    Boe Prox
    Blog |
    Twitter
    PoshWSUS |
    PoshPAIG | PoshChat |
    PoshEventUI
    PowerShell Deep Dives Book

  • Trouble installing SQL Server 2012 on Windows Server 2012

    I have a brand new install of Windows 2012 Server Standard Edition. I am trying to get SQL Server 2012 installed on it, but have been having a lot of trouble.
    When I run the System Configuration Checker everything passes except for "Setup administrator" -
    Rule "Setup administrator" failed. The account running SQL Server Setup does not have administrator rights on the computer. To continue, use an account with administrator rights.
    If I go to try the "New SQL Server stand-alone installation or add features to an existing installation then I get the same "Setup administrator" error plus the following one.
    Setup account privileges
    Rule "Setup account privileges" failed.
    The account that is running SQL Server Setup does not have one or all of teh following rights: the right to back up files and directories, the right to manage auditing and the security log and the right to debug programs. To continue, use an account with both
    of these rights. For more information, see
    http://msdn.microsoft.com/en-us/library/ms813696.aspx, http://msdn.microsoft.com/en-us/library/ms813959.aspx and
    http://msdn.microsoft.com/en-us/library/ms813847.aspx.
    I am running the install using the administrator account. The server is not on a domain. I have tried to suggestions in the links above as well as this link http://support.microsoft.com/kb/2000257, but I still keep getting the same error. I even just re-installed
    the OS so it is fresh, nothing else on it.
    Any help would be greatly appreciated.
    Thanks,
    Hassan

    Hi Hassan,
    Based on the error message, this issue can occur the current Windows user isn’t a Windows administrator account. Please refer to the following document to add the account to Local Administrator Group. If the issue persists, please help to collect the installation
    log under C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log
    Windows Server 2012: How to Add an Account to a Local Administrator Group:
    http://social.technet.microsoft.com/wiki/contents/articles/13436.windows-server-2012-how-to-add-an-account-to-a-local-administrator-group.aspx
    View and Read SQL Server Setup Log Files:
    http://technet.microsoft.com/en-us/library/ms143702(v=sql.110)
    Allen Li
    TechNet Community Support

  • Error in sql_engine_core_inst_Cpu64_1.log file for SQL Server 2012

    I was running SQL Server 2012 in Win 7 64 bit OS. Some how I found SQLSERVER server is not running and I was not able to run the service. Then I tried to unisntall and install again. And I found that some of the SQL Server
    features got failed,  like: Reporting Services - Native, Database Engine Services, Data Quality Services, Full-Text and Semantic Extractions for Search and SQL Server Replication. I checked the Summary.txt
    file from location C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log. It thsi logs referes to another log file location like: 
    Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          1639
      Component log file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140127_151409\sql_engine_core_inst_Cpu64_1.log
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=sql_engine_core_inst.msi%400x162A16FE%400x1639
    I did unisntall/install multipel times. But fhw to fix the issue that saying in sql_engine_core_inst_Cpu64_1.log file.: 
    === Verbose logging started: 1/27/2014  15:45:04  Build type: SHIP UNICODE 5.00.7601.00  Calling process: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\x64\ScenarioEngine.exe ===
    MSI (c) (C4:BC) [15:45:04:321]: Resetting cached policy values
    MSI (c) (C4:BC) [15:45:04:321]: Machine policy value 'Debug' is 0
    MSI (c) (C4:BC) [15:45:04:321]: ******* RunEngine:
               ******* Product: E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
               ******* Action: 
               ******* CommandLine: **********
    MSI (c) (C4:BC) [15:45:04:322]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (C4:BC) [15:45:04:322]: Grabbed execution mutex.
    MSI (c) (C4:BC) [15:45:04:323]: Cloaking enabled.
    MSI (c) (C4:BC) [15:45:04:323]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (C4:BC) [15:45:04:323]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (38:8C) [15:45:04:327]: Running installation inside multi-package transaction E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
    MSI (s) (38:8C) [15:45:04:327]: Grabbed execution mutex.
    MSI (s) (38:A0) [15:45:04:327]: Resetting cached policy values
    MSI (s) (38:A0) [15:45:04:327]: Machine policy value 'Debug' is 0
    MSI (s) (38:A0) [15:45:04:327]: ******* RunEngine:
               ******* Product: E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
               ******* Action: 
               ******* CommandLine: **********
    MSI (s) (38:A0) [15:45:04:452]: Machine policy value 'TransformsSecure' is 0
    MSI (s) (38:A0) [15:45:04:452]: User policy value 'TransformsAtSource' is 0
    MSI (s) (38:A0) [15:45:04:475]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (38:A0) [15:45:04:475]: Specified instance {18B2A97C-92C3-4AC7-BE72-F823E0BC895B} via transform :InstID01.mst;:InstName02.mst is already installed. MSINEWINSTANCE requires a new instance that is not installed.
    MSI (s) (38:A0) [15:45:04:475]: MainEngineThread is returning 1639
    MSI (s) (38:8C) [15:45:04:477]: User policy value 'DisableRollback' is 0
    MSI (s) (38:8C) [15:45:04:477]: Machine policy value 'DisableRollback' is 0
    MSI (s) (38:8C) [15:45:04:477]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (38:8C) [15:45:04:478]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 
    MSI (s) (38:8C) [15:45:04:478]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 
    MSI (s) (38:8C) [15:45:04:478]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (38:8C) [15:45:04:478]: Restoring environment variables
    MSI (c) (C4:BC) [15:45:04:481]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (C4:BC) [15:45:04:481]: MainEngineThread is returning 1639
    === Verbose logging stopped: 1/27/2014  15:45:04 ===
    Please advice. I searched many places and did not get actual solution that will resolve my case.
    Nusrat Akhter

    Hi Nusrat Akhter,
    According to your description, when installing the first install failed, and it looks like the instance did not uninstall completely. To solve the issue I recommend you changed the instance name in re-installing SQL Server, and check if it can work fine.
    There is a similar issue that the SQL engine will not start, and there is no method of uninstalling either it, or any of the components etc. You can review the following post.
    https://connect.microsoft.com/SQLServer/feedback/details/710892/sql-server-2012-rc0-install-fails-citing-invalid-drivers
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • SQL Server 2012 SP2 support for installation of OM 2012 R2

    Hello everyone,
    according to
    http://technet.microsoft.com/en-us/library/dn281933.aspx SQL Server 2012 SP2 is a supported configuration for SCOM 2012 R2.
    Now I've just happily set up an SQL 2012 R2 Instance with SP1 on Windows Server 2012 R2, applied the SP2 and made the Installation a Windows Server Core. Which worked just great but when I started the Setup for SCOM2012 R2 the installer says my SQL Server
    Version is not supported and will not allow the Setup to continue. I've also upgraded the Reporting Services Database to 2012 SP2 aswell, I guess that would appear on the next page on the installer and cause similar issues.
    I guess it's a configuration value that needs to be changed on the install media to add the SQL Server Version of SP2 as an allowed one.
    Can anyone clarify my theory? If it's not that, is there an updated Media somewhere accessible?

    Hi,
    Please check install logs for further information:
    OpsMgr 2012: My installation failed. What log files do I read and where can I find them?
    http://www.systemcentercentral.com/opsmgr-2012-my-installation-failed-what-log-files-do-i-read-and-where-can-i-find-them/
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    alright, next smartass here's the logfile stating the same thing as I do:
    <Quote>
    [2014-11-07T08:44:33.0634360+01:00]: Always: Trace Session Started
    [08:44:33]: Always: :
    [08:44:33]: Always: :
    Application Started
    [08:44:33]: Always: :Machine on which Operations Manager is being installed: SCOM01
    [08:44:33]: Always: :Current setup user: domain\Administrator
    [08:44:33]: Always: :Current setup version: 7.1.10226.0
    [08:44:33]: Always: :Begin: Parse command line.
    [08:44:33]: Debug: :Collected a path value of: C:\SC2012 R2 SCOM\Setup\AMD64\
    [08:44:33]: Always: :Begin: Parse command line.
    [08:44:33]: Always: :End: Parse reporting command line switches.
    [08:44:33]: Always: :End: Parse data reader account command line switches.
    [08:44:33]: Always: :End: Parse command line.
    [08:44:33]: Always: :Begin: System State detection.
    [08:44:33]: Info: :Info:CheckIfOpsMgrComponentsInstalled: component - OMCONSOLE
    [08:44:33]: Info: :Info:Component OMCONSOLE is not installed
    [08:44:33]: Info: :Info:CheckIfOpsMgrComponentsInstalled: component - OMSERVER
    [08:44:33]: Info: :Info:Component OMSERVER is not installed
    [08:44:33]: Info: :Info:CheckIfOpsMgrComponentsInstalled: component - OMWEBCONSOLE
    [08:44:33]: Info: :Info:Component OMWEBCONSOLE is not installed
    [08:44:33]: Info: :Info:CheckIfOpsMgrComponentsInstalled: component - OMREPORTING
    [08:44:33]: Info: :Info:Component OMREPORTING is not installed
    [08:44:33]: Always: :End: System State detection.
    [08:44:33]: Info: :Beginning evaluation of rule 'Upgrade rules for SCOM setup.'
    [08:44:33]: Debug: :Condition wasnt defined for rule 'Upgrade rules for SCOM setup.'.
    [08:44:33]: Info: :Beginning evaluation of rule 'UpgradeRulesForAllSKUs'
    [08:44:33]: Debug: :Condition wasnt defined for rule 'UpgradeRulesForAllSKUs'.
    [08:44:33]: Info: :Beginning evaluation of rule 'BlueUpgradeRules'
    [08:44:33]: Debug: :Condition wasnt defined for rule 'BlueUpgradeRules'.
    [08:44:33]: Info: :Info:OM12RTMServer is installed: False
    [08:44:33]: Info: :Info:Product check for OM12RTMServer failed.
    [08:44:33]: Info: :Info:OM12RTMConsole is installed: False
    [08:44:33]: Info: :Info:Product check for OM12RTMConsole failed.
    [08:44:33]: Info: :Info:OM12RTMWebConsole is installed: False
    [08:44:33]: Info: :Info:Product check for OM12RTMWebConsole failed.
    [08:44:33]: Info: :Info:OM12RTMReporting is installed: False
    [08:44:33]: Info: :Info:Product check for OM12RTMReporting failed.
    [08:44:33]: Info: :Info:OM12RTMServer is installed: False
    [08:44:33]: Info: :Info:Product check for OM12RTMServer failed.
    [08:44:33]: Info: :Info:OM12RTMConsole is installed: False
    [08:44:33]: Info: :Info:Product check for OM12RTMConsole failed.
    [08:44:33]: Info: :Info:OM12RTMWebConsole is installed: False
    [08:44:33]: Info: :Info:Product check for OM12RTMWebConsole failed.
    [08:44:33]: Info: :Info:OM12RTMReporting is installed: False
    [08:44:33]: Info: :Info:Product check for OM12RTMReporting failed.
    [08:44:33]: Info: :Finished evaluation of rule 'BlueUpgradeRules'
    [08:44:33]: Info: :Finished evaluation of rule 'UpgradeRulesForAllSKUs'
    [08:44:33]: Info: :Finished evaluation of rule 'Upgrade rules for SCOM setup.'
    [08:44:33]: Always: :This is not an upgrade
    [08:44:33]: Always: :No OM component is installed on this machine and it's interactive run.
    [08:44:33]: Error: :Error:User did not accept EULA.
    [08:44:33]: Always: :We don't have a path entry in the registry or from command line so using default install path as C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
    [08:44:33]: Info: :SetInstallPath: installpath has a value of C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
    [08:44:33]: Info: :Info:SetComponentSwitches: component list not specified
    [08:44:33]: Always: :Begin: Rationalize components.
    [08:44:33]: Always: :Begin: Rationalize command line arguments (first run).
    [08:44:33]: Always: :RationalizeCommandLineArguments succeeded.
    [08:44:33]: Always: :End: Rationalize command line arguments (first run).
    [08:44:33]: Always: :Begin: Rationalize final steps.
    [08:44:33]: Info: :Beginning evaluation of rule 'Block Unsupported MOM versions.'
    [08:44:33]: Debug: :Condition wasnt defined for rule 'Block Unsupported MOM versions.'.
    [08:44:33]: Info: :Beginning evaluation of rule 'PreOM12RTMRulesGroup'
    [08:44:33]: Debug: :Condition wasnt defined for rule 'PreOM12RTMRulesGroup'.
    [08:44:33]: Info: :Info:MOMSelect is installed: False
    [08:44:33]: Info: :Info:MOMAEM is installed: False
    [08:44:33]: Info: :Info:MOMEval is installed: False
    [08:44:33]: Info: :Info:MOMOEM is installed: False
    [08:44:33]: Info: :Info:MOMAgent is installed: False
    [08:44:33]: Info: :Info:MOMGW is installed: False
    [08:44:33]: Info: :Info:MOMReporting is installed: False
    [08:44:33]: Info: :Finished evaluation of rule 'PreOM12RTMRulesGroup'
    [08:44:33]: Info: :Beginning evaluation of rule 'BlockPre2012SP1'
    [08:44:33]: Debug: :Condition wasnt defined for rule 'BlockPre2012SP1'.
    [08:44:33]: Info: :Info:OMServer is installed: False
    [08:44:33]: Info: :Info:OMConsole is installed: False
    [08:44:33]: Info: :Info:OMReporting is installed: False
    [08:44:33]: Info: :Info:OMWebConsole is installed: False
    [08:44:33]: Info: :Finished evaluation of rule 'BlockPre2012SP1'
    [08:44:33]: Info: :Finished evaluation of rule 'Block Unsupported MOM versions.'
    [08:44:33]: Info: :Beginning evaluation of rule 'Check that Unsupported SKU does not exist for SCOM setup.'
    [08:44:33]: Debug: :Condition wasnt defined for rule 'Check that Unsupported SKU does not exist for SCOM setup.'.
    [08:44:33]: Info: :Info:MOMAEM is installed: False
    [08:44:33]: Info: :Info:MOMEval is installed: False
    [08:44:33]: Info: :Finished evaluation of rule 'Check that Unsupported SKU does not exist for SCOM setup.'
    [08:44:33]: Always: :End: Rationalize final steps.
    [08:44:33]: Always: :End: Rationalize components.
    [08:44:33]: Error: :Error:IsReportingValidToInstall failed SRS instance not provided
    [08:44:33]: Info: :Start adding DataItems
    [08:44:33]: Info: :Initial Configuration
    [08:44:33]: Info: :Database Configuration
    [08:44:33]: Info: :Data Warehouse Configuration
    [08:44:33]: Info: :Management Server
    [08:44:33]: Info: :Operations console
    [08:44:33]: Info: :Web Console Server
    [08:44:33]: Info: :Reporting Server
    [08:44:33]: Info: :Final Configuration
    [08:44:33]: Info: :Done adding DataItems
    [08:44:33]: Info: :Adding Page StartPageTrack
    [08:44:33]: Info: :Adding Page UpgradeInvalidStartPage
    [08:44:33]: Info: :Adding Page UpgradeInvalidRootPage
    [08:44:33]: Info: :Adding Page ARPStartPageSwitch
    [08:44:33]: Info: :Adding Page ARPAddRemovePage
    [08:44:34]: Info: :Adding Page UpgradePageSwitch
    [08:44:34]: Info: :Adding Page UpgradePage
    [08:44:34]: Info: :Adding Page UpgradeManagementGroupPageSwitch
    [08:44:34]: Info: :Adding Page UpgradeManagementGroupPage
    [08:44:34]: Info: :Adding Page UpgradeEulaPage
    [08:44:34]: Info: :Adding Page RegularStartPageSwitch
    [08:44:34]: Info: :Adding Page ComponentsPageCleanInstall
    [08:44:34]: Info: :Adding Page ComponentsPage
    [08:44:34]: Info: :Adding Page InstallationLocationPage
    [08:44:34]: Info: :Adding Page PrerequisitesProgressPage
    [08:44:34]: Info: :Adding Page AdditionalPrerequisitesPage
    [08:44:34]: Info: :Adding Page InstallScenario
    [08:44:34]: Info: :Adding Page ShortEulaPage
    [08:44:34]: Info: :Adding Page SecondServerOperationalDb
    [08:44:34]: Info: :Adding Page EulaPageCleanInstall
    [08:44:34]: Info: :Adding Page FirstServerOperationalDb
    [08:44:34]: Info: :Adding Page DbPageDataWarehouse
    [08:44:34]: Info: :Adding Page SelectManagementServerForReporting
    [08:44:34]: Info: :Adding Page SelectReportingInstance
    [08:44:34]: Info: :Adding Page SelectManagementServerForWebConsole
    [08:44:34]: Info: :Adding Page WebConsoleSitePage
    [08:44:34]: Info: :Adding Page WebConsoleAuthorizationMode
    [08:44:34]: Info: :Adding Page AccountsInformationPage
    [08:44:34]: Info: :Adding Page ImproveUserExperiencePage
    [08:44:34]: Info: :Adding Page MSFTUpdatePage
    [08:44:34]: Info: :Adding Page ConfigurationSummaryPage
    [08:44:34]: Info: :Adding Page ProgressPage
    [08:44:34]: Info: :Adding Page BlockPage
    [08:44:34]: Info: :Adding Page FinishPage
    [08:44:34]: Info: :Beginning evaluation of rule 'Block Unsupported MOM versions.'
    [08:44:34]: Debug: :Condition wasnt defined for rule 'Block Unsupported MOM versions.'.
    [08:44:34]: Info: :Beginning evaluation of rule 'PreOM12RTMRulesGroup'
    [08:44:34]: Debug: :Condition wasnt defined for rule 'PreOM12RTMRulesGroup'.
    [08:44:34]: Info: :Info:MOMSelect is installed: False
    [08:44:34]: Info: :Info:MOMAEM is installed: False
    [08:44:34]: Info: :Info:MOMEval is installed: False
    [08:44:34]: Info: :Info:MOMOEM is installed: False
    [08:44:34]: Info: :Info:MOMAgent is installed: False
    [08:44:34]: Info: :Info:MOMGW is installed: False
    [08:44:34]: Info: :Info:MOMReporting is installed: False
    [08:44:34]: Info: :Finished evaluation of rule 'PreOM12RTMRulesGroup'
    [08:44:34]: Info: :Beginning evaluation of rule 'BlockPre2012SP1'
    [08:44:34]: Debug: :Condition wasnt defined for rule 'BlockPre2012SP1'.
    [08:44:34]: Info: :Info:OMServer is installed: False
    [08:44:34]: Info: :Info:OMConsole is installed: False
    [08:44:34]: Info: :Info:OMReporting is installed: False
    [08:44:34]: Info: :Info:OMWebConsole is installed: False
    [08:44:34]: Info: :Finished evaluation of rule 'BlockPre2012SP1'
    [08:44:34]: Info: :Finished evaluation of rule 'Block Unsupported MOM versions.'
    [08:44:34]: Info: :Beginning evaluation of rule 'Check that Unsupported SKU does not exist for SCOM setup.'
    [08:44:34]: Debug: :Condition wasnt defined for rule 'Check that Unsupported SKU does not exist for SCOM setup.'.
    [08:44:34]: Info: :Info:MOMAEM is installed: False
    [08:44:34]: Info: :Info:MOMEval is installed: False
    [08:44:34]: Info: :Finished evaluation of rule 'Check that Unsupported SKU does not exist for SCOM setup.'
    [08:44:34]: Debug: :OMForwardToStartPageTrackPageHandler: Moving to page RegularStartPageSwitch
    [08:44:34]: Always: :Entering Page: ComponentsPageCleanInstall
    [08:44:34]: Info: :Server Installed:False  InstallingNow:False
    [08:44:34]: Error: :No Management Server property was provided and Setup could not find a valid Management Server.  Please rerun setup with a valid management server.
    [08:44:34]: Error: :The management server specified would lead to an invalid scenario. Setup will attempt to find a valid scenario mgt server.
    [08:44:34]: Info: :Server Installed:False  InstallingNow:False
    [08:44:34]: Error: :No Management Server property was provided and Setup could not find a valid Management Server.  Please rerun setup with a valid management server.
    [08:44:37]: Info: :Server Installed:False  InstallingNow:False
    [08:44:37]: Error: :No Management Server property was provided and Setup could not find a valid Management Server.  Please rerun setup with a valid management server.
    [08:44:37]: Error: :The management server specified would lead to an invalid scenario. Setup will attempt to find a valid scenario mgt server.
    [08:44:37]: Info: :Server Installed:False  InstallingNow:False
    [08:44:37]: Error: :No Management Server property was provided and Setup could not find a valid Management Server.  Please rerun setup with a valid management server.
    [08:44:38]: Info: :Server Installed:False  InstallingNow:False
    [08:44:38]: Error: :No Management Server property was provided and Setup could not find a valid Management Server.  Please rerun setup with a valid management server.
    [08:44:38]: Error: :The management server specified would lead to an invalid scenario. Setup will attempt to find a valid scenario mgt server.
    [08:44:38]: Info: :Server Installed:False  InstallingNow:False
    [08:44:38]: Error: :No Management Server property was provided and Setup could not find a valid Management Server.  Please rerun setup with a valid management server.
    [08:44:39]: Info: :Server Installed:False  InstallingNow:False
    [08:44:39]: Error: :No Management Server property was provided and Setup could not find a valid Management Server.  Please rerun setup with a valid management server.
    [08:44:39]: Error: :The management server specified would lead to an invalid scenario. Setup will attempt to find a valid scenario mgt server.
    [08:44:39]: Info: :Server Installed:False  InstallingNow:False
    [08:44:39]: Error: :No Management Server property was provided and Setup could not find a valid Management Server.  Please rerun setup with a valid management server.
    [08:44:41]: Info: :Server Installed:False  InstallingNow:True
    [08:44:42]: Info: :Server Installed:False  InstallingNow:True
    [08:44:42]: Always: :Entering Page: InstallationLocationPage
    [08:44:44]: Info: :Info:User specified valid installation path of: C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
    [08:44:44]: Always: :Entering Page: PrerequisitesProgressPage
    [08:44:44]: Debug: :LoadPrerequisites: Start adding ComponentTitles
    [08:44:44]: Always: :LoadPrerequisites: Start adding DataItems
    [08:44:44]: Always: :memoryCheckTitle
    [08:44:44]: Always: :memoryCheckTitle
    [08:44:44]: Always: :ntfsCheckTitle
    [08:44:44]: Always: :DriveSpaceCheckTitle
    [08:44:44]: Always: :DriveSpaceCheckTitle
    [08:44:44]: Always: :OSVersionCheckTitle
    [08:44:44]: Always: :OSVersionCheckTitle
    [08:44:44]: Always: :PowershellCheckTitle
    [08:44:44]: Always: :DomainControllerCheckTitle
    [08:44:44]: Always: :WindowsInstallerCheckTitle
    [08:44:44]: Always: :PendingRebootCheckTitle
    [08:44:44]: Always: :WinRMCheckTitle
    [08:44:44]: Always: :RemoteRegistryCheckTitle
    [08:44:44]: Always: :ReportViewerCheckTitle
    [08:44:44]: Always: :ClusteredServerCheckTitle
    [08:44:44]: Always: :ActiveDirectoryCheckTitle
    [08:44:44]: Always: :IsComputerNameValidTitle
    [08:44:44]: Always: :SEViewerInstalledCheck
    [08:44:44]: Always: :AVIcodeAgentCheck
    [08:44:44]: Always: :MOMASPAgentInstalledCheck
    [08:44:44]: Always: :IISCheckTitle
    [08:44:44]: Always: :IISMetabaseCheckTitle
    [08:44:44]: Always: :AspNetCheckTitle
    [08:44:44]: Always: :WindowsAuthRoleCheckTitle
    [08:44:44]: Always: :StaticContentRoleCheckTitle
    [08:44:44]: Always: :DefaultDocumentRoleCheckTitle
    [08:44:44]: Always: :DirectoryBrowsingRoleCheckTitle
    [08:44:44]: Always: :HttpErrorsRoleCheckTitle
    [08:44:44]: Always: :HttpLoggingRoleCheckTitle
    [08:44:44]: Always: :RequestMonitorRoleCheckTitle
    [08:44:44]: Always: :RequestFilterRoleCheckTitle
    [08:44:44]: Always: :StaticContentCheckTitle
    [08:44:44]: Always: :IISConsoleCheckTitle
    [08:44:44]: Always: :IsapiAllowedCheckTitle
    [08:44:44]: Always: :IsAspNetIntegratedHandlerInstalledTitle
    [08:44:44]: Always: :HttpActivationCheckTitle
    [08:44:44]: Always: :HttpActivationCheckTitle
    [08:44:44]: Always: :LoadPrerequisites: Done adding prerequisites checks
    [08:44:45]: Info: :Approximated Memory = 16384
    [08:44:45]: Info: :Approximated Memory = 16384
    [08:44:45]: Debug: :**************************************************
    [08:44:45]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and MemoryCheck-2gbFail: 0CheckPrerequisites: Logic Type:and MemoryCheck-4gbWarn: 0]]>
    [08:44:45]: Debug: :
    [08:44:45]: Debug: :CheckPrerequisites: memoryCheckTitle: Passed
    [08:44:45]: Debug: :
    [08:44:45]: Debug: :**************************************************
    [08:44:46]: Info: :Approximated Memory = 16384
    [08:44:46]: Info: :Approximated Memory = 16384
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and MemoryCheck-1gbFail: 0CheckPrerequisites: Logic Type:and MemoryCheck-2gbWarn: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: memoryCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and NTFSDrive-Fail: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: ntfsCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and UIDriveSpaceCheck-Fail: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: DriveSpaceCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and DriveSpaceCheck-Fail: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: DriveSpaceCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:or OSVersion-w2k8-Fail: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: OSVersionCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: ProductType was not a match.  Looking for: LanmanNT Found: ServerNTCheckPrerequisites: Logic Type:or OSVersion-w2k8R2-Fail: 2CheckPrerequisites: Logic Type:or OSVersion-w2k8R2-Fail: 0CheckPrerequisites:
    Logic Type:and ArchitectureIs64Check-Fail: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: OSVersionCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and PowerShell2-Fail: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: PowershellCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: ProductType was not a match.  Looking for: WinNT Found: ServerNTCheckPrerequisites: Logic Type:or OSVersion-notWorkstation-warn: 1CheckPrerequisites: Logic Type:or OSVersion-notServer-warn: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: DomainControllerCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[Successfully parsed version numbers.  Required: 3.1  Actual: 5.0CheckPrerequisites: Logic Type:and WindowsInstallerVersionCheckDelegate-v31: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: WindowsInstallerCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and PendingReboot-Fail: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: PendingRebootCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :ServiceControlFunctions.IsEnabledAndRunning(): Starting...
    [08:44:46]: Debug: :IsServiceInstalled: WinRM?  True.
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and ServiceCheck-WinRM: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: WinRMCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :IsServiceInstalled: RemoteRegistry?  True.
    [08:44:46]: Debug: :ServiceControlFunctions.IsEnabledAndRunning(): Starting...
    [08:44:46]: Debug: :IsServiceInstalled: RemoteRegistry?  True.
    [08:44:46]: Debug: :ServiceControlFunctions.IsEnabledAndRunning(): Checking second time because first time result was False.
    [08:44:46]: Debug: :IsServiceInstalled: RemoteRegistry?  True.
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and PassIfWin8Anything: 0CheckPrerequisites: Logic Type:and ServiceCheck-WinRM-enabled: 0CheckPrerequisites: Logic Type:or ServiceCheck-WinRM-running: 2]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: RemoteRegistryCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Info: :Version Installed=11.1.3452.0
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and ReportViewer: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: ReportViewerCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and ClusteredMachineCheck: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: ClusteredServerCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and ADCheck-Fail: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: ActiveDirectoryCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[IsComputerNameValid: Hostname: SCOM01  Len: 6CheckPrerequisites: Logic Type:and IsComputerNameValid: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: IsComputerNameValidTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and Se-ViewerInstalled-x86: 0CheckPrerequisites: Logic Type:and Se-ViewerInstalled-x64: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: SEViewerInstalledCheck: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x86: 0CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x64: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: AVIcodeAgentCheck: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and W3SVC: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: IISCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and Metabase: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: IISMetabaseCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and ASPNET: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: AspNetCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and WindowsAuthentication: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: WindowsAuthRoleCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and StaticContent: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: StaticContentRoleCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and DefaultDocument: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: DefaultDocumentRoleCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and DirectoryBrowse: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: DirectoryBrowsingRoleCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and HttpErrors: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: HttpErrorsRoleCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and HttpLogging: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: HttpLoggingRoleCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and RequestMonitor: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: RequestMonitorRoleCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and RequestFiltering: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: RequestFilterRoleCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and HttpCompressionStatic: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: StaticContentCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :**************************************************
    [08:44:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and ManagementConsole: 0]]>
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :CheckPrerequisites: IISConsoleCheckTitle: Passed
    [08:44:46]: Debug: :
    [08:44:46]: Debug: :**************************************************
    [08:44:47]: Debug: :**************************************************
    [08:44:47]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and IsapiCgiAllowed: 0]]>
    [08:44:47]: Debug: :
    [08:44:47]: Debug: :CheckPrerequisites: IsapiAllowedCheckTitle: Passed
    [08:44:47]: Debug: :
    [08:44:47]: Debug: :**************************************************
    [08:44:47]: Debug: :**************************************************
    [08:44:47]: Debug: :<![CDATA[Found the ASP.NET PageHandler Factory for v4CheckPrerequisites: Logic Type:and IsAspNetIntegratedHandlerInstalled: 0]]>
    [08:44:47]: Debug: :
    [08:44:47]: Debug: :CheckPrerequisites: IsAspNetIntegratedHandlerInstalledTitle: Passed
    [08:44:47]: Debug: :
    [08:44:47]: Debug: :**************************************************
    [08:44:47]: Debug: :**************************************************
    [08:44:47]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:or HttpAuthorizationCheck: 2CheckPrerequisites: Logic Type:or OSVersion-NewerThan2k8R2: 0]]>
    [08:44:47]: Debug: :
    [08:44:47]: Debug: :CheckPrerequisites: HttpActivationCheckTitle: Passed
    [08:44:47]: Debug: :
    [08:44:47]: Debug: :**************************************************
    [08:44:47]: Debug: :**************************************************
    [08:44:47]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:or HttpAuthorizationCheck: 0CheckPrerequisites: The value 6.2.9200.0 was not within the range 0.0.0.0 to 6.2.0.0.CheckPrerequisites: Logic Type:or OSVersion-w2k12-Fail: 2]]>
    [08:44:47]: Debug: :
    [08:44:47]: Debug: :CheckPrerequisites: HttpActivationCheckTitle: Passed
    [08:44:47]: Debug: :
    [08:44:47]: Debug: :**************************************************
    [08:44:47]: Info: :Beginning evaluation of rule 'Block installation of SCOM.'
    [08:44:47]: Debug: :Condition wasnt defined for rule 'Block installation of SCOM.'.
    [08:44:47]: Info: :Beginning evaluation of rule 'SCOMSetupRulesGroup'
    [08:44:47]: Debug: :Condition wasnt defined for rule 'SCOMSetupRulesGroup'.
    [08:44:47]: Info: :Info:MOMASPAgent is installed: False
    [08:44:47]: Info: :Finished evaluation of rule 'SCOMSetupRulesGroup'
    [08:44:47]: Info: :Finished evaluation of rule 'Block installation of SCOM.'
    [08:44:47]: Debug: :**************************************************
    [08:44:47]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and MOMASPAgent: 0]]>
    [08:44:47]: Debug: :
    [08:44:47]: Debug: :CheckPrerequisites: MOMASPAgentInstalledCheck: Passed
    [08:44:47]: Debug: :
    [08:44:47]: Debug: :**************************************************
    [08:44:47]: Always: :CheckPrerequisites: Return Value 0
    [08:44:47]: Always: :Entering Page: AdditionalPrerequisitesPage
    [08:44:49]: Always: :Entering Page: InstallScenario
    [08:45:00]: Always: :Entering Page: EulaPageCleanInstall
    [08:45:00]: Always: :Displaying localized EULA for localization: en
    [08:45:00]: Always: :Displaying Eula: C:\Users\Administrator.domain\AppData\Local\SCOM\Setup\en\eula_en_eval.rtf
    [08:45:03]: Info: :Info:User has agreed to EULA.
    [08:45:04]: Info: :Not all of the information on the screen is valid, so we're not going to check disk space.
    [08:45:04]: Info: :Not all of the information on the screen is valid, so we're not going to check disk space.
    [08:45:04]: Always: :Entering Page: FirstServerOperationalDb
    [08:45:04]: Info: :Not all of the information on the screen is valid, so we're not going to check disk space.
    [08:45:04]: Info: :Not all of the information on the screen is valid, so we're not going to check disk space.
    [08:45:11]: Always: :DatabaseConfigurationPage: Attempting to connect to database using server\instance SCOMDB01\SCOMDB01. If we need it, the port is 1433
    [08:45:11]: Debug: :MSSQL$SCOMDB01 on server SCOMDB01 is in a running state
    [08:45:11]: Info: :Info:Opening/Testing Sql Connection on SCOMDB01\SCOMDB01, port:
    [08:45:11]: Debug: :Connection was not open.  We will try to open it.
    [08:45:12]: Debug: :SqlConnectionReady returned True.
    [08:45:12]: Debug: :MSSQL$SCOMDB01 on server SCOMDB01 is in a running state
    [08:45:12]: Debug: :Connection was not open.  We will try to open it.
    [08:45:12]: Debug: :SqlConnectionReady returned True.
    [08:45:12]: Info: :Info:Using DB command timeout = 1800 seconds.
    [08:45:12]: Info: :SQL Product Level: SP2
    [08:45:12]: Info: :SQL Edition: Business Intelligence Edition (64-bit)
    [08:45:12]: Info: :SQL Version: 11.0.5058.0
    [08:45:12]: Always: :Could not find a match for Business Intelligence Edition (64-bit) edition of SQL.
    [08:45:12]: Always: :Current Version of SQL=11.0.5058.0   Required Version=10.50.2500.0
    [08:45:12]: Always: :Entering GetRemoteOSVersion.
    [08:45:12]: Info: :Info: remoteOS = 6.3.9600
    [08:45:12]: Info: :Info:Using DB command timeout = 1800 seconds.
    [08:45:12]: Info: :Info:Using DB command timeout = 1800 seconds.
    [08:45:12]: Info: :The SQL Collation is valid.
    [08:45:12]: Info: :Info:Using DB command timeout = 1800 seconds.
    [08:45:12]: Debug: :MSSQL$SCOMDB01 on server SCOMDB01 is in a running state
    [08:45:12]: Debug: :Connection was not open.  We will try to open it.
    [08:45:12]: Debug: :SqlConnectionReady returned True.
    [08:45:12]: Info: :Info:DatabaseConfigurationPage: DB connection attempt completed.
    [08:45:12]: Info: :Info:DatabaseConfigurationPage: DB connection attempt completed.
    [08:45:12]: Debug: :MSSQL$SCOMDB01 on server SCOMDB01 is in a running state
    [08:45:12]: Debug: :Connection was not open.  We will try to open it.
    [08:45:12]: Debug: :SqlConnectionReady returned True.
    [08:45:12]: Info: :Info:Using DB command timeout = 1800 seconds.
    [08:45:12]: Info: :Not all of the information on the screen is valid, so we're not going to check disk space.
    [08:45:12]: Info: :Not all of the information on the screen is valid, so we're not going to check disk space.
    [08:45:12]: Debug: :MSSQL$SCOMDB01 on server SCOMDB01 is in a running state
    [08:45:12]: Debug: :Connection was not open.  We will try to open it.
    [08:45:12]: Debug: :SqlConnectionReady returned True.
    [08:45:12]: Info: :Info:Using DB command timeout = 1800 seconds.
    [08:45:12]: Info: :Info:Using DB command timeout = 1800 seconds.
    [08:45:12]: Info: :Checking freespace for: SCOMDB01,D:\
    [08:45:12]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,D:\
    [08:45:12]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:12]: Info: :Checking freespace for: SCOMDB01,E:\
    [08:45:12]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,E:\
    [08:45:12]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:12]: Info: :Checking freespace for: SCOMDB01,D:\
    [08:45:12]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,D:\
    [08:45:12]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:12]: Info: :Checking freespace for: SCOMDB01,E:\
    [08:45:12]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,E:\
    [08:45:12]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:12]: Info: :Checking freespace for: SCOMDB01,D:\
    [08:45:12]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,D:\
    [08:45:12]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:12]: Info: :Checking freespace for: SCOMDB01,E:\
    [08:45:12]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,E:\
    [08:45:12]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:12]: Info: :Checking freespace for: SCOMDB01,D:\
    [08:45:12]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,D:\
    [08:45:12]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:12]: Info: :Checking freespace for: SCOMDB01,E:\
    [08:45:12]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,E:\
    [08:45:12]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:13]: Info: :Checking freespace for: SCOMDB01,D:\
    [08:45:13]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,D:\
    [08:45:13]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:13]: Info: :Checking freespace for: SCOMDB01,E:\
    [08:45:13]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,E:\
    [08:45:13]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:13]: Info: :Checking freespace for: SCOMDB01,D:\
    [08:45:13]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,D:\
    [08:45:13]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:13]: Info: :Checking freespace for: SCOMDB01,E:\
    [08:45:13]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,E:\
    [08:45:13]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:15]: Info: :Checking freespace for: SCOMDB01,D:\
    [08:45:15]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,D:\
    [08:45:15]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:15]: Info: :Checking freespace for: SCOMDB01,E:\
    [08:45:15]: Always: :CheckUsedSpaceOnDrive: Checking for space on drive SCOMDB01,E:\
    [08:45:15]: Info: :CheckUsedSpaceOnDrive succeeded.
    [08:45:15]: Always: :Connected to SCOMDB01\SCOMDB01 without using the port number.
    [08:45:15]: Info: :Info:DatabaseConfigurationPage: Attempting to connect to database using server\instance SCOMDB01\SCOMDB01 and port 1433
    [08:45:15]: Info: :Info:Opening/Testing Sql Connection on SCOMDB01\SCOMDB01, port:
    [08:45:15]: Debug: :Connection was not open.  We will try to open it.
    [08:45:15]: Debug: :SqlConnectionReady returned True.
    [08:45:15]: Debug: :MSSQL$SCOMDB01 on server SCOMDB01 is in a running state
    [08:45:15]: Debug: :Connection was not open.  We will try to open it.
    [08:45:15]: Debug: :SqlConnectionReady returned True.
    [08:45:15]: Info: :Info:Using DB command timeout = 1800 seconds.
    [08:45:15]: Info: :SQL Product Level: SP2
    [08:45:15]: Info: :SQL Edition: Business Intelligence Edition (64-bit)
    [08:45:15]: Info: :SQL Version: 11.0.5058.0
    [08:45:15]: Always: :Could not find a match for Business Intelligence Edition (64-bit) edition of SQL.
    [08:45:15]: Always: :Current Version of SQL=11.0.5058.0   Required Version=10.50.2500.0
    [08:45:15]: Debug: :MSSQL$SCOMDB01 on server SCOMDB01 is in a running state
    [08:45:15]: Debug: :Connection was not open.  We will try to open it.
    [08:45:15]: Debug: :SqlConnectionReady returned True.
    [08:45:15]: Info: :Info:Using DB command timeout = 1800 seconds.
    [08:45:15]: Info: :SQL Product Level: SP2
    [08:45:15]: Info: :SQL Edition: Business Intelligence Edition (64-bit)
    [08:45:15]: Info: :SQL Version: 11.0.5058.0
    [08:45:15]: Always: :Could not find a match for Business Intelligence Edition (64-bit) edition of SQL.
    [08:45:15]: Error: :IsValidSQLInstance: Sql None edition is not supported.
    [08:45:15]: Error: :Error:DB Config Page: Invalid Sql Instance.
    [08:45:15]: Info: :Info:DatabaseConfigurationPage: DB connection attempt completed.
    [08:45:15]: Info: :Info:DatabaseConfigurationPage: DB connection attempt completed.
    [08:45:22]: Info: :The user canceled setup
    [08:45:22]: Always: :Begin: Property bag dump.
    [08:45:22]: Always: :SetupStartTime = 07.11.2014 08:44:33
    [08:45:22]: Always: :Collection ProtectedProperties (System.Collections.ArrayList):
    [08:45:22]: Always: : [0] = ActionAccountPassword
    [08:45:22]: Always: : [1] = DASAccountPassword
    [08:45:22]: Always: :DefaultLogName = C:\Users\Administrator.domain\AppData\Local\SCOM\Logs\OpsMgrSetupWizard.log
    [08:45:22]: Always: :DefaultLogPath = C:\Users\Administrator.domain\AppData\Local\SCOM\Logs
    [08:45:22]: Always: :path = C:\SC2012 R2 SCOM\Setup\AMD64\
    [08:45:22]: Always: :setupexepath = C:\Users\Administrator.domain\AppData\Local\SCOM\Setup
    [08:45:22]: Always: :ArchitectureIs64Check = True
    [08:45:22]: Always: :Collection ListOfSupportedComponents (System.Collections.ArrayList):
    [08:45:22]: Always: : [0] = OMCONSOLE
    [08:45:22]: Always: : [1] = OMSERVER
    [08:45:22]: Always: : [2] = OMWEBCONSOLE
    [08:45:22]: Always: : [3] = OMREPORTING
    [08:45:22]: Always: :install = 1
    [08:45:22]: Always: :installpath = C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
    [08:45:22]: Always: :EulaFilesPath = C:\Users\Administrator.domain\AppData\Local\SCOM\Setup
    [08:45:22]: Always: :HealthServiceTypeId = AB4C891F-3359-3FB6-0704-075FBFE36710
    [08:45:22]: Always: :hsPort = C51B7833-DA54-1653-D8FD-1A738EF8DED5
    [08:45:22]: Always: :ScreensLoaded = 1
    [08:45:22]: Always: :Collection ListOfSelectedComponents (System.Collections.ArrayList):
    [08:45:22]: Always: : [0] = OMREPORTING
    [08:45:22]: Always: : [1] = OMWEBCONSOLE
    [08:45:22]: Always: : [2] = OMCONSOLE
    [08:45:22]: Always: : [3] = OMSERVER
    [08:45:22]: Always: :OMREPORTING = 1
    [08:45:22]: Always: :OMWEBCONSOLE = 1
    [08:45:22]: Always: :OMCONSOLE = 1
    [08:45:22]: Always: :OMSERVER = 1
    [08:45:22]: Always: :ManagementServer = SCOM01.domain.local
    [08:45:22]: Always: :SelectDatabaseInstanceReloadScreenInformation = 1
    [08:45:22]: Always: :ReloadPrerequisitesPageChoice = PrerequisitesProgressPage
    [08:45:22]: Always: :LoadedPrerequisiteXmlFile = True
    [08:45:22]: Always: :PrerequisitesCheckXMLLoaded = True
    [08:45:22]: Always: :CountFilteredPrerequisites_Failed = 0
    [08:45:22]: Always: :CountFilteredPrerequisites_Warning = 0
    [08:45:22]: Always: :CountFilteredPrerequisites_PassedWithChoices = 0
    [08:45:22]: Always: :CountFilteredPrerequisites_Passed = 37
    [08:45:22]: Always: :PrerequisiteState = Passed
    [08:45:22]: Always: :XmlFilteredPrerequisites_Passed : Begin XML property
    [08:45:22]: Always: :<?xml version="1.0" encoding="utf-8"?><Root><Title TitleText="OMSERVER"><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="memoryCheckTitle" descriptionBody="" descriptionTitle="serverMemCheckPassed" resolution="serverMemCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="ntfsCheckTitle" descriptionBody="" descriptionTitle="ntfsCheckPassed" resolution="ntfsCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="DriveSpaceCheckTitle" descriptionBody="" descriptionTitle="ServerDriveSpaceCheckPassed" resolution="ServerDriveSpaceCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="OSVersionCheckTitle" descriptionBody="" descriptionTitle="OSVersionCheckPassed" resolution="OSVersionCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="PowershellCheckTitle" descriptionBody="" descriptionTitle="PowershellCheckPassed" resolution="PowerShellCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="DomainControllerCheckTitle" descriptionBody="" descriptionTitle="DomainControllerCheckPassed" resolution="DomainControllerCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="WindowsInstallerCheckTitle" descriptionBody="" descriptionTitle="WindowsInstallerCheckPassed" resolution="WindowsInstallerCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="PendingRebootCheckTitle" descriptionBody="" descriptionTitle="PendingRebootCheckPassed" resolution="PendingRebootCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="WinRMCheckTitle" descriptionBody="" descriptionTitle="WinRMCheckPassed" resolution="WinRMCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="RemoteRegistryCheckTitle" descriptionBody="" descriptionTitle="RemoteRegistryCheckPassed" resolution="RemoteRegistryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="ClusteredServerCheckTitle" descriptionBody="" descriptionTitle="ClusteredServerCheckPassed" resolution="ClusteredServerCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="ActiveDirectoryCheckTitle" descriptionBody="" descriptionTitle="ActiveDirectoryCheckPassed" resolution="ActiveDirectoryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="IsComputerNameValidTitle" descriptionBody="" descriptionTitle="IsComputerNameValidPassed" resolution="IsComputerNameValidResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="AVIcodeAgentCheck" descriptionBody="" descriptionTitle="AVICodeAgentCheckPassed" resolution="AVICodeAgentCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="MOMASPAgentInstalledCheck" descriptionBody="" descriptionTitle="MOMASPAgentCheckPassed" resolution="MOMASPAgentResolution" /></Title><Title TitleText="OMCONSOLE"><Detail state="Passed"
    image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="DriveSpaceCheckTitle" descriptionBody="" descriptionTitle="ConsoleDriveSpaceCheckPassed" resolution="ConsoleDriveSpaceCheckResolution"
    /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="OSVersionCheckTitle" descriptionBody="" descriptionTitle="OSVersionCheckPassed" resolution="OSVersionCheckResolution"
    /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="ReportViewerCheckTitle" descriptionBody="" descriptionTitle="ReportViewerCheckPassed" resolution="ReportViewerCheckResolution"
    /></Title><Title TitleText="OMWEBCONSOLE"><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="SEViewerInstalledCheck" descriptionBody="" descriptionTitle="SeViewerInstalledCheckPassed"
    resolution="SeViewerInstalledCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="IISCheckTitle" descriptionBody="" descriptionTitle="IISCheckPassed"
    resolution="IISCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="IISMetabaseCheckTitle" descriptionBody="" descriptionTitle="IISMetabaseCheckPassed"
    resolution="IISMetabaseCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="AspNetCheckTitle" descriptionBody="" descriptionTitle="AspNetCheckPassed"
    resolution="AspNetCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="WindowsAuthRoleCheckTitle" descriptionBody="" descriptionTitle="WindowsAuthRoleCheckPassed"
    resolution="WindowsAuthRoleCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="StaticContentRoleCheckTitle" descriptionBody="" descriptionTitle="StaticContentRoleCheckPassed"
    resolution="StaticContentRoleCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="DefaultDocumentRoleCheckTitle" descriptionBody="" descriptionTitle="DefaultDocumentRoleCheckPassed"
    resolution="DefaultDocumentRoleCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="DirectoryBrowsingRoleCheckTitle" descriptionBody=""
    descriptionTitle="DirectoryBrowsingRoleCheckPassed" resolution="DirectoryBrowsingRoleCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="HttpErrorsRoleCheckTitle"
    descriptionBody="" descriptionTitle="HttpErrorsRoleCheckPassed" resolution="HttpErrorsRoleCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="HttpLoggingRoleCheckTitle" descriptionBody="" descriptionTitle="HttpLoggingRoleCheckPassed" resolution="HttpLoggingRoleCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="RequestMonitorRoleCheckTitle" descriptionBody="" descriptionTitle="RequestMonitorRoleCheckPassed" resolution="RequestMonitorRoleCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="RequestFilterRoleCheckTitle" descriptionBody="" descriptionTitle="RequestFilterRoleCheckPassed" resolution="RequestFilterRoleCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="StaticContentCheckTitle" descriptionBody="" descriptionTitle="StaticContentCheckPassed" resolution="StaticContentCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="IISConsoleCheckTitle" descriptionBody="" descriptionTitle="IISConsoleCheckPassed" resolution="IISConsoleCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="IsapiAllowedCheckTitle" descriptionBody="" descriptionTitle="IsapiAllowedCheckPassed" resolution="IsapiAllowedCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
    name="IsAspNetIntegratedHandlerInstalledTitle" descriptionBody="" descriptionTitle="IsAspNetIntegratedHandlerInstalledPassed" resolution="IsAspNetIntegratedHandlerInstalledResolution" /><Detail state="Passed"
    image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="HttpActivationCheckTitle" descriptionBody="" descriptionTitle="HttpActivationCheckPassed" resolution="HttpActivationCheckResolution"
    /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="HttpActivationCheckTitle" descriptionBody="" descriptionTitle="HttpActivation45RoleCheckPassed" resolution="HttpActivation45RoleCheckResolution"
    /></Title><Title TitleText="OMREPORTING"><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png" name="memoryCheckTitle" descriptionBody="" descriptionTitle="ReportingMemCheckPassed"
    resolution="ReportingMemCheckResolution" /></Title></Root>
    [08:45:22]: Always: :End XML property
    [08:45:22]: Always: :UserSelectedInstallType = FirstServer
    [08:45:22]: Always: :ManagementGroupName = domain Management Group
    [08:45:22]: Always: :SqlServerInstance = SCOMDB01\SCOMDB01
    [08:45:22]: Always: :DatabaseName = OperationsManager
    [08:45:22]: Always: :DatabaseSize = 1000
    [08:45:22]: Always: :DatabaseLogPath = E:\Program Files\Microsoft SQL Server\MSSQL11.SCOMDB01\MSSQL\Data
    [08:45:22]: Always: :DatabasePath = D:\Program Files\Microsoft SQL Server\MSSQL11.SCOMDB01\MSSQL\DATA\
    [08:45:22]: Always: :DbMode = New
    [08:45:22]: Always: :InvalidSQLReason = SQL Server None edition cannot be used.
    [08:45:22]: Always: :UserCanceledInstall = 1
    [08:45:22]: Always: :InstallSuccess = 1
    [08:45:22]: Always: :End: Property bag dump.
    [08:45:22]: Debug: :CEIP disabled. CEIP data will NOT be sent.
    [08:45:22]: Always: :Application Ended: Successful
    [08:45:22]: Always: :
    [2014-11-07T08:45:22.6484495+01:00]: Always: Trace Session Ended
    </Quote>
    I've even highlighted in Bold what it's moaning about so can we please for gods sake cut it down already? I do know SQL Server, I've been working with OM for years I don't need to be told to disable the Firewall, I can read and think through Errors so how about
    going back to my second post on this thread: Either fix that XML file or get me some proper install media?

  • Data Retrieval from SSRS 2008 R2 to SQL Server 2012 standard

    Hello,
    We have a virtual machine running SSRS 2008 R2 and a physical server running SQL server 2012 standard.  We are having an issue with a report that is taking almost 10 minutes for the data to be retrieved from the sql 2012 database.  We used the
    execution logging query to debug and analyze.  We see that it renders and processes very fast, but the data retrieval time is very slow.  When the same query is run using sql studio mgr. from the SSRS server it runs just fine...it
    takes seconds for the results to come up.
    I don't believe there is a compatibilty issue because other reports run fine.  We're just having problems with one report.

    A long shot, but I've seen where the data type of a report parameter is mismatched against the data type of the table it is being compared against.  SQL profiler would show this clearly.  
    This would explain why the query returns quickly in ssms but not with the report.  

  • SSIS modules created with VS2013 fail on SQL Server 2012

    HI all,
    i've just installed SQL Server 2012, VS 2013 (Premium) and SQL Server Data Tools (SSDTBI_VS2012_x86_ENU) on my local workstation (running Win7 x64).
    Creating and debugging of new SSIS modules works well, while execution of the module using DTEXEC fails with:
       Description: Package migration from version 8 to version 6 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".
    How to create SSIS modules with VS2013, which are executable on SQL Server 2012?
    Any help is appreciated!
    Thank you in advance!
    Details:
    D:\tmp>dtexec /f Package_by_vs2013.dtsx
    Microsoft (R) SQL Server Execute Package Utility
    Version 11.0.2100.60 for 64-bit
    Copyright (C) Microsoft Corporation. All rights reserved.
    Started:  12:48:51
    Error: 2014-04-09 12:48:52.69
       Code: 0xC001F02A
       Source: Package
       Description: Cannot create a task from XML for task "Execute SQL Task", type "Microsoft.ExecuteSQLTask" due to error 0x80070057 "Falscher Parameter.".
    End Error
    Error: 2014-04-09 12:48:52.69
       Code: 0xC0010018
       Source: Execute SQL Task
       Description: Failed to load task "Execute SQL Task", type "". The contact information for this task is "Execute SQL Task; Microsoft Corporation; SQL Server 2
    014; ? 2014 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
    End Error
    Error: 2014-04-09 12:48:52.72
       Code: 0xC0010026
       Source: Execute SQL Task
       Description: The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; SQL Server 2014; ? 2014 Microsof
    t Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
    End Error
    Error: 2014-04-09 12:48:52.72
       Code: 0xC0024107
       Source: Execute SQL Task
       Description: There were errors during task validation.
    End Error
    Error: 2014-04-09 12:48:52.72
       Code: 0xC0010025
       Source: Package
       Description: The package cannot execute because it contains tasks that failed to load.
    End Error
    DTExec: The package execution returned DTSER_FAILURE (1).
    Started:  12:48:51
    Finished: 12:48:52
    Elapsed:  1.123 seconds

    Hi,
    I have moved this thread to
    SQL Server Integration Services forum for better support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error while installing SQL Server 2012 X64 SP2,

    Error while installing SQL Server 2012 X64 SP2,
     When I installed the SQL Server 2012 X64 SP1, I got the attached error.
     What might be the issue here?
     Thank you
     Best
    Jamal

    Hello,
    Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
    Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
    Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Unable to install sql server 2012 eval edition with the downloaded files

    Error which I get when i try to launch the installer 
    I  have downloaded them in a single folder 
    Note : windows os is win 7 with sp1
    Mudassar

    TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
    The following error has occurred:
    Unable to open Windows Installer file 'C:\Users\mabdu1\Downloads\SQLServer2012SP1-FullSlipstream-ENU-x64\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi'.
    Windows Installer error message: The system cannot open the device or file specified.
    Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
    For help, click: http://go.microsoft.com/fwlink?
    LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xDC80C325
    BUTTONS:
    &Retry
    Cancel
    Now I am getting this error after I downloaded 2012 sp1 iso and extracted it to do the installation
    Mudassar

  • Unable to install SQL Server 2012 Developer

    I have a problem with installing SQL Server 2012 (no matter which edition I choose). Installation usually runs well, but near the end shows up an error:
    TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
    The following error has occurred:
    Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
    BUTTONS:
    OK
    The help link points to not-existing article on MSDN page. After I click OK button, the installation reaches it's end and shows up another, which tells, that Database Engine Services, Reporting Services - Native, Data Quality Services, Full-Text and Semantic
    Extractions for Search and SQL Server Replication failed to install.
    After that I am able to start, for example SQL Management Studio, but cannot connect to database. Also services of SQL Server (Server, Server Agent, Full-text Filter, Reporting Services) are stopped and I am not able to start them manually (any try throws an
    error: "The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details").
    I tried complete reinstalling of SQL Server, cleaning registry entries, different editions of that software - none method helped. Also, I tried the .iso images of installation media on other computers - it worked well and installed without any errors. My OS
    is Windows 8.1 x64.

    Hello,
    Please uninstall SQL server completely from add remove program.Make sure you uninstall it completely
    Now right click on Setup.exe file which is there in SQL Server installable and select run as administrator to start installation.
    On page where you are asked to provide startup account for SQL Server service select NT Authority\System or Local System account.
    This issue is basically after installation SQL Server is not able to bring online database services using account which you selected .Local system account will allow it to come online
    After installation change startup account to domain account with least privilege
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Unable to uninstall sql server 2012 from Windows 7(ultimate) 64-bit SP1 version.

    I am trying to install sql sever 2012 on my m/c but it's giving me error after partial installation.
    Now I have successfully installed Sql Server 2008 R2 on my machine but when I am trying to uninstall 2012 sql server from my machine its giving an error regarding unsupported OS. However as mentioned earlier I have Windows 2007 Ultimate SP1 (64-bit) installed
    on my machine which is included in valid platform for sql server 2012. Also I installed visual studio 2013 on my machine but it existed with error SqlServer\LocalDB not installed.

    Hi pritamk,
    According to your error message, as other post, you can uninstall SQL Server from command line, inaddition, another workaround is that change the compatibility mode of setup.exe to Vista SP2, then run “Remove” option from the control panel. You can refer
    to the following steps.
    Browse to your SQL setup bootstrap folder, For SQL Server 2012, this is the path "C:\Program Files \Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\".
    Go to Setup.exe file and right click on Setup.exe. Then go to properties and click on "Compatibility" tab. Under "Compatibility mode", click on Run this program in compatibility mode for "Windows Vista (Service Pack 2)". Then Click on "Apply" then "OK".
    After that go to control panel -> Programs and Features -> and remove SQL Server 2012
    There is similar issue about uninstalling SQL Server 2012 RC0 from control panel. You can review the following post.
    https://connect.microsoft.com/SQLServer/feedback/details/707706/unable-to-uninstall-sql-server-2012-rc0-from-control-panel
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Unable to install SQL server 2012 on windows 7 64bit

    Overall summary:
    Final result: Failed: see details below
    Exit code (Decimal): -2057043966
    Exit facility code: 1380
    Exit error code: 2
    Exit message: There was a failure to calculate the applicability of setting ALLINSTANCES.
    Start time: 2015-03-17 21:43:13
    End time: 2015-03-17 21:43:34
    Requested action: LandingPage
    Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x4F2D2386%400xE9BC3D64&EvtType=0x4F2D2386%400xE9BC3D64
    Machine Properties:
    Machine name: ELKR-1214-1745
    Machine processor count: 4
    OS version: Windows 7
    OS service pack: Service Pack 1
    OS region: United States
    OS language: English (United States)
    OS architecture: x64
    Process architecture: 64 Bit
    OS clustered: No
    Package properties:
    Description: Microsoft SQL Server 2012
    ProductName: SQL Server 2012
    Type: RTM
    Version: 11
    SPLevel: 0
    Installation location: c:\afaeb7739e47ceedb4b5f79a1e14a784\x64\setup\
    Installation edition:
    User Input Settings:
    ACTION: LandingPage
    CONFIGURATIONFILE:
    ENU: true
    HELP: false
    INDICATEPROGRESS: false
    QUIET: false
    QUIETSIMPLE: false
    UIMODE: AutoAdvance
    X86: false
    Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150317_214254\ConfigurationFile.ini
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report file: The rule result report file is not available.
    Exception summary:
    The following is an exception stack listing the exceptions in outermost to innermost order
    Inner exceptions are being indented
    Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException
    Message:
    There was a failure to calculate the applicability of setting ALLINSTANCES.
    HResult : 0x85640002
    FacilityCode : 1380 (564)
    ErrorCode : 2 (0002)
    Data:
    SettingId = ALLINSTANCES
    WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException@2
    HelpLink.EvtType = 0x4F2D2386@0xE9BC3D64
    DisableWatson = true
    Stack:
    at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.CalculateAllSettings(Boolean chainerSettingOnly)
    at Microsoft.SqlServer.Configuration.SetupExtension.FinalCalculateSettingsAction.ExecuteAction(String actionId)
    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
    Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingChangeabilityException
    Message:
    There was a failure to calculate the changeability of setting ALLINSTANCES.
    HResult : 0x85640003
    FacilityCode : 1380 (564)
    ErrorCode : 3 (0003)
    Data:
    SettingId = ALLINSTANCES
    WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingChangeabilityException@3
    Stack:
    at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateChangeabilityByUser()
    at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallQueuedSubscriberDelegates()
    at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.Publish(Publisher publisher)
    at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
    Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.UnableRetrieveConfigObjectForSettingException
    Message:
    Unable to retrieve a public configuration object type Microsoft.SqlServer.Configuration.SetupExtension.SlpInputSettings for setting ALLINSTANCES.
    HResult : 0x85640007
    FacilityCode : 1380 (564)
    ErrorCode : 7 (0007)
    Data:
    SettingId = ALLINSTANCES
    ConfigObjectType = Microsoft.SqlServer.Configuration.SetupExtension.SlpInputSettings
    WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.UnableRetrieveConfigObjectForSettingException@7
    Stack:
    at Microsoft.SqlServer.Chainer.Infrastructure.SettingBridge.GetHostingObject()
    at Microsoft.SqlServer.Chainer.Infrastructure.SettingBridge.ChangeabilityByUser()
    at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallFunctionWhileAutosubscribing[T](SubscriberDelegate subscriberDelegate, Int32 priority, AutosubscribingFunctionDelegate`1 function)
    at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateChangeabilityByUser()
    Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.ChainerInfrastructureException
    Message:
    Unable to generate a temporary class (result=1).
    error CS0009: Metadata file 'c:\Windows\assembly\GAC_MSIL\System\2.0.0.0__b77a5c561934e089\System.dll' could not be opened -- 'File is corrupt'
    HResult : 0x84b10001
    FacilityCode : 1201 (4b1)
    ErrorCode : 1 (0001)
    Stack:
    at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.DeserializeObject(String rootPath, Type type, String elementXPath)
    at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.DeserializeObject(String rootPath, Type type)
    at Microsoft.SqlServer.Chainer.Infrastructure.SettingBridge.GetHostingObject()
    Inner exception type: System.InvalidOperationException
    Message:
    Unable to generate a temporary class (result=1).
    error CS0009: Metadata file 'c:\Windows\assembly\GAC_MSIL\System\2.0.0.0__b77a5c561934e089\System.dll' could not be opened -- 'File is corrupt'
    Stack:
    at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
    at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
    at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
    at System.Xml.Serialization.XmlSerializer.GenerateTempAssembly(XmlMapping xmlMapping, Type type, String defaultNamespace)
    at System.Xml.Serialization.XmlSerializer..ctor(Type type, String defaultNamespace)
    at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.DeserializeObject(String rootPath, Type type, String elementXPath)

    Hi,
    I would like to add that if you see summary.txt file you would see
    Message:
    Unable to generate a temporary class (result=1).
    error CS0009: Metadata file 'c:\Windows\assembly\GAC_MSIL\System\2.0.0.0__b77a5c561934e089\System.dll' could not be opened -- 'File is corrupt'
    HResult : 0x84b10001
    FacilityCode : 1201 (4b1)
    ErrorCode : 1 (0001)
    You can see file is corrupt. So either you have to download the setup file again or there can be chance that Antivirus caused some issue.
    Plus if you see starting of summary.txt you could see
    Requested action: LandingPage
    The error message came while landing page was being loaded/or was in action so again I think it is some thing related to corrupt media or antivirus.
    Please
    1. Download ISO file again and extract using WINRAR, don't use Winzip
    2. Disable Antivirus.
    3. Make a new folder and extract installable there.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Unable to upgrade SQL Server 2008 R2 to SQL Server 2012 SP1

    I'm encountering error after error, after successfully installing the upgrade advisor (which took some doing) and running it with essentially no warnings/errors (the one warning was on the connection strings, as I recall -- and all of the warnings had a
    "fix after" status.
    First failure involved SSRS and the inability to create the "managed account". Backed out the upgrade using http://sqldbanotes.blogspot.com/2013/10/how-to-fix-failed-in-place.html
    Now the failure involves SSAS and unable to connect to analysis services with name MSSQLServerOLAPService.  That is the logical name for the service, although it shows up as just MSSQLServer when looking at it in the services list.  I tried
    setting the service account to a local account as  well as to Local System -- did not make a difference, the upgrade couldn't apparently find it regardless.
    Has anybody successfully done an in place upgrade from SQL Server 2008 R2 to SQL Server 2012?

    Hi Bob，
    Thanks for your post and I am glad to hear that the issue is resolved. Thanks for you posting a reply to share your solution and I had marked it as answer. That way, other community members could benefit from your sharing.
    Regards,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

Maybe you are looking for

  • HP LaserJet 1320 won't print in color (Win7 64 bit, new cartridge)

    I can't get my HP Laserjet 1320 to print in color any more. Changed the cartridge. I'm on Windows 7, 64 bit, but the issue started before the upgrade to Win 7. I can't even find the selection for color vs black and white printing.

  • Problem in Decimal displaying of Data in BI 7.0 DSO

    Hi Experts,                     We were creating similar ODS which was in 3.5 in BI 7.0 Version.While transferring routine from 3.5 to 7. There is difference in display of data. In BI 7.0  ODS it is showing as 22.73 In BW 7.0 DSO it is showing as 22.

  • How to view instagram download in itunes

    how to view instagram download in itunes

  • MacBook Leopard Bugs

    These are the bugs I have so far discovered in Leopard since I got it last night. I should note that I did an Upgrade install. AirPort Disk - Accounts do not work, only shows shared account. Does however accept user name and password for log in. - Ap

  • Notes on BI

    Hi Experts, I wanted complete notes on SAP-BI 7.0, which talks about the background process and also the flow of it, immediately. Awaiting to hear from you. cheers, CHK