Debug phone?
Does anyone know how to get hold of any debug-enabled MIDP phones?
For problems that cause a phone or app. restart or termination message to occur on phones and not in the emulator, it would nice to have a phone with a VM that can report the problem, either locally on the phone, or over the air.
thanks
Hi
Make sure you assign a DN manually at the line level. It will solve the problem.
For more information and configuration assistance please take a look at the following link.
http://www.cisco.com/en/US/docs/voice_ip_comm/cumc/cisco_jabber/Android/86/Cisco_Jabber_Android_8.6.x_Admin_Guide.html#wp288341
HTH
Similar Messages
-
VS2013 - I cannot deploy and debug windows phone 8.1 store app to windows phone device
Hello, I create a project from C#-> Store Apps -> Windows Phone Apps, but I cannot deploy my apps to my blue device. There was a error message show "Element not found". I can run the app from Blend, and found Blend package the app to Appx
file. Is any method that we can deploy store app into windows phone blue device directly and how to debug it on VS 2013?Hi,
Welcome to MSDN.
I am afraid that this is not the proper forum for this issue, since this forum is to discuss and ask questions about the Visual Studio Debugging tools, Visual Studio Profiler tools, and Visual Studio Ultimate IntelliTrace.
Since your issue needs professional windows phone knowledge, and there is dedicated forums for windows phone development issues
Windows Phone Development forums, you could choose one of its sub forums depends on your issue like Tools
for Windows Phone development or
Developing for Windows Phone .
In addition, I did a research, you could check whether the following links help.
http://msdn.microsoft.com/en-us/library/windowsphone/develop/ff402565(v=vs.105).aspx
http://msdn.microsoft.com/en-us/library/windowsphone/develop/ff402523(v=vs.105).aspx#BKMK_Runanddebug
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Can I host a Windows Phone VHS on a remote host and have Visual Studio debug on it?
As per the title really, is it possible to have an instance of the windows phone emulator running on our Hyper-V dev cluster and then have development machines use it for debugging?
Our development machines are also virtualised, and as such we can't host the windows emulator on them.
Thanks.Hi Mandeep,
Since this issue is related to the specific Windows Phone apps, to help you resolve this issue as soon as possible, you could post this issue to the Windows Phone forum here:
http://social.msdn.microsoft.com/Forums/wpapps/en-us/home?category=wpapps&filter=alltypes&sort=lastpostdesc
I think you would get dedicated support from the Windows Phone expert. Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How can I debug using my Android phone?
Hello,
I am trying to run a debug for a game I am developing on my phone. However, I am not sure how to do that. I know how to publish and get what I have so far on the phone though.
I am using Flash CS5 and managed to get my hands on the Adobe Air For Android 2.5 extension
I tried publishing to my phone (once without launching app and the other without launching) and then hitting Debug-> Begin Remote Debug Session -> Actionscript 3.0. That does nothing however. Am I supposed to receive some sort of dialog regarding connecting to the computer or something? My permissions of the app when I published to my phone allowed for internet access.
I did notice there were two other debugs related to AIR, one of them was Debug in AIR Launcher (mobile), which was greyed out.
I apologize, but if someone could help me, I would greatly appreciate it, thanks!Hello,
You will need a desktop Firefox to set up an account unfortunately. This could be done on any computer that can run Firefox. Might be good to use http://portableapps.com/apps/internet/firefox_portable for this purpose. You will need to make sure you get all 3 bits of info from the setup.
* Sync username
* Sync password
* Sync key
Then use the manual setup options for Firefox Sync on your tablets.
Please see here for more discussion on this: https://support.mozilla.org/en-US/questions/975545 -
[Eclipse ADT] Where can I find debug-driver for my smart phone?
Hello my friends,
I want to run and debug Android apps developed by the help of the Eclipse IDE on my smart phone (Huawei Ascend P6). The phones usb-debugging option is appointed and the phone is connected to my notebook by usb but Eclipse doesn't recognise it. I haven't got a correct connection.
On Windows there are appropriate drivers. Are there any driver on Arch Linux?
What can I do? Thanks for help!
Kind regards,
Lexis
Last edited by Lax Lexis (2014-07-16 12:12:32)Hi there,
Did take a look at the AUR eclipse-android ? -
PhoneGap Build plugin always sets debugging which breaks Windows Phone XHR
I've traced a problem with XMLHttpRequest on PhoneGap for Windows Phone 8 to the debug setting on PhoneGap Build (turning it on causes XHR to silently fail). Unfortunately, the PhoneGap Build component for Dreamweaver always turns debugging on. It appears to take no ntoice of the ProjectSettings file that is created in the project folder (I have set "debug":false with no effect) and turning debugging off on the build.phonegap.com site also has no effect on the next build initiated by Dreamweaver.
The Dreamweaver PhoneGap component needs to be adjusted to take notice of the ProjectSettings for debug and to update these according to the actual settings on the web site. Alternatively, expose the debug setting in the PhoneGap build panel.
I have had to abandon DreamWeaver for Windows Phone builds altogether.Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf. -
How do I resynch my phone to my computer and reinstall itunes which was lost from computer when I got in debugged. I have my music on phone
Try these 2 User Tips...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Once you have it working again...
MAKE A BACKUP OF iTunes...
Full Details Here > http://support.apple.com/kb/HT1751 -
Jabber Options - Phone Accounts - Voicemail -- "Spinning Wheel"
Been trying to resolve a nagging issue. We currently have CUCM 8.6.2-20000-2, CUPS 8.6.4-10000-28 and just put up Unity Conn 9.1. Jabber Win clients are 9.2(1). Several people have not been able to integrate voicemail into the Jabber client.
We are totally MS AD integrated. In CUPS, I had Applications -> Cisco Jabber -> Settiings Credentials Used For Voicemail service set to CUPS so the user would not need to supply credentials. To help me debug, I went and changed this setting to "Not Set" so that the Phone Accounts option appears in Jabber 4 Win client.
So far all the people who do not work access the Phone Accounts setting in the Jabber client see the "Spinning Wheel". They can't see the fields to enter their AD creds and the voicemail server. Reinstall of the client does not seem to help. There seemed to be a bug that described this but I think it was fixed in 9.1(2). You can't display the Bug description because it contains proprietary info.
I have attached a screen shot of my Jabber Client Phone Account -- when I enter the credentials, I log in fine.
Anyone seen this or know how to fix?
TIA --- PerryWell, I had TAC look at this issue. Short story is that it was an issue with one of the *many* local cache files which hid the real source of the problem. I actually had the Mailstore misconfgured in CUPS. I used the Exchange server's CAS IP instead of Unity Connection. We created new Mailstore definition that used the Unity Conn IP's, created a new Voicemail Profile and associated the user to that profile. She worked....
I deleted my all my Jabber for Windows local cache files and I then received the "spining wheel" issue. I moved my ID to the new Voicemail Profile with correct Mailstore and I could connect fine. TAC spent an hour pouring through files on my PC and could not find the reason why my ID was working. TAC indicates that in 9.x, a lot of this configuration moves to CUCM and hopefully cuts down on these issues! PRT files from the Jabber client really did not assist them in locating the problem.
Hope this helps.... -
IP Phone SSL VPN and Split tunneling
Hi Team,
I went throught the following document which is very useful:
https://supportforums.cisco.com/docs/DOC-9124
The only things i'm not sure about split-tunneling point:
Group-policy must not be configured with split tunnel or split exclude. Only tunnel all is the supported tunneling policy
I could see many implementation when they used split-tunneling, like one of my customer:
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
banner value This system is only for Authorized users.
dns-server value 10.64.10.13 10.64.10.14
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value prod.mobily.lan
address-pools value SSLClientPool
webvpn
anyconnect keep-installer installed
anyconnect ssl rekey time 30
anyconnect ssl rekey method ssl
anyconnect ask none default anyconnect
username manager-max password XTEsn4mfYvPwC5af encrypted privilege 15
username manager-max attributes
vpn-group-policy GroupPolicy1
tunnel-group PhoneVPN type remote-access
tunnel-group PhoneVPN general-attributes
address-pool SSLClientPool
authentication-server-group AD
default-group-policy GroupPolicy1
tunnel-group PhoneVPN webvpn-attributes
group-url https://84.23.107.10 enable
ip local pool SSLClientPool 10.200.18.1-10.200.18.254 mask 255.255.254.0
access-list split-tunnel remark split-tunnel network list
access-list split-tunnel standard permit 10.0.0.0 255.0.0.0
It is working for them w/o any issue.
My question would be
- is the limitation about split-tunneling still valid? If yes, why it is not recommended?
Thanks!
EvaHi,
If you're not using certificates in client authentication then the SSL handshake will complete before the user is requested to authenticate with username/password. If this authentication request fails you will see the SSL session terminated immediately following this failure (as in the logs you provided). Notice the 5 seconds between the SSL session establishment and termination, this is most likely when the user is being authenticated against the aaa server. If the phone is failing authentication against an external aaa-server you'll want to investigate the logs on that server to determine the root cause of the failure. The ASA can also provide confirmation of the authentication request/reject with the command 'show aaa-server'. If you want to see what's going on at an authentication protocol level you can enable several debugs including "debug aaa authentication|common|internal' and protocol specific debugs such as 'debug radius user|session|all' or 'debug ldap'.
Did this answer your question? If so, please mark it Answered! -
Cisco SIP Phone 9971 won't register on CME 8.6 or 8.5 Please HELP
Please help me , I have problem with registering Cisco SIP phone 9971 with CME 8.6 on ISR 2901.
I configured CME for SIP clients, then I add configuration for 9971 phone and create profiles. Phone downloaded SEP...xml file from CME,after that phone look for g4-tones.xml and gd-sip.jar files, I added them to CME after that phone downloaded them and reboot. Now phone is stuck in some kind of loop and does not register on CME.
On phone log I can see repeting next few messeges.
12:01:58a No DNS Server IP
12:01:59a Updating Trust list
12:01:59a No Trust List instaled
12:01:59a SEP04C5AB03B0D.cnf.xml (TFTP) // at this time phone download SEP...xml file from CME
12:02:00a VPN Error: VPN is not Configured
on CME if issue DEBUG TFTP EVENTS i receive next few lines
*Aug 18 18:20:19.891: TFTP: Looking for CTLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:19.987: TFTP: Looking for ITLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:20.083: TFTP: Looking for ITLFile.tlv
*Aug 18 18:20:20.347: TFTP: Looking for SEP04C5A4B03B0D.cnf.xml
*Aug 18 18:20:20.351: TFTP: Opened flash:/SEP04C5A4B03B0D.cnf.xml, fd 14, size 4585 for process 141
*Aug 18 18:20:20.363: TFTP: Finished flash:/SEP04C5A4B03B0D.cnf.xml, time 00:00:00 for process 141
here you can see verison info of CME
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 15:31 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
ELTOSAN_ROUTER uptime is 1 hour, 50 minutes
System returned to ROM by reload at 16:29:20 UTC Thu Aug 18 2011
System image file is "flash:/c2900-universalk9-mz.SPA.151-4.M.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
Cisco CISCO2901/K9 (revision 1.0) with 471040K/53248K bytes of memory.
Processor board ID FGL1508252Y
3 Gigabit Ethernet interfaces
2 terminal lines
1 Virtual Private Network (VPN) Module
4 Voice FXO interfaces
4 Voice FXS interfaces
1 Internal Services Module (ISM) with Services Ready Engine (SRE)
Survivable Remote Site Voicemail (SRSV) on Cisco Unity Express (CUE) 8.5.1 in slot/sub-slot 0/0
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device# PID SN
*0 CISCO2901/K9 xxxxxxxxxxxxx
Technology Package License Information for Module:'c2900'
Technology Technology-package Technology-package
Current Type Next reboot
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc uck9 Permanent uck9
data None None None
Configuration register is 0x2102
this is RUNNING CONFIGURATION
! Last configuration change at 16:10:12 UTC Thu Aug 18 2011
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ELTOSAN_ROUTER
boot-start-marker
boot system flash:/c2900-universalk9-mz.SPA.151-4.M.bin
boot-end-marker
no aaa new-model
no ipv6 cef
ip source-route
no ip routing
no ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.5.1 192.168.5.10
ip dhcp excluded-address 192.168.5.200 192.168.5.255
ip dhcp pool phone
network 192.168.5.0 255.255.255.0
default-router 192.168.5.251
option 150 ip 192.168.5.251
ip dhcp pool data
relay source 192.168.2.0 255.255.255.0
relay destination 192.168.2.201
multilink bundle-name authenticated
crypto pki token default removal timeout 0
voice-card 0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
fax protocol pass-through g711alaw
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 192.168.5.251 port 5060
max-dn 6
max-pool 6
load 9971 sip9971.9-1-1SR1.loads
authenticate register
tftp-path flash:
create profile sync 0005135312289902
voice register dn 1
number 207
allow watch
name GossaVM
label 207
voice register dn 3
number 101
name Dejan
label 101
mwi
voice register pool 1
id mac 000C.29C5.0011
number 1 dn 1
dtmf-relay sip-notify
username testvm password testera
codec g711alaw
voice register pool 3
id mac 04C5.A4B0.3B0D
type 9971
number 3 dn 3
presence call-list
dtmf-relay rtp-nte
username dejan password 1234
codec g711alaw
no vad
license udi pid CISCO2901/K9 sn xxxxxxxxxxxx
hw-module ism 0
hw-module pvdm 0/0
redundancy
interface GigabitEthernet0/0
description INTERFACE INTERNAL
no ip address
no ip route-cache
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/0.2
description LAN DATA
encapsulation dot1Q 2
ip address 192.168.2.251 255.255.255.0
no ip route-cache
interface GigabitEthernet0/0.5
description LAN VOICE
encapsulation dot1Q 5
ip address 192.168.5.251 255.255.255.0
no ip route-cache
interface ISM0/0
no ip address
no ip route-cache
shutdown
!Application: SRSV-CUE Running on ISM
interface GigabitEthernet0/1
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
interface ISM0/1
description Internal switch interface connected to Internal Service Module
shutdown
interface Vlan1
no ip address
no ip route-cache
shutdown
ip forward-protocol nd
no ip http server
no ip http secure-server
snmp-server community public RO
tftp-server flash:dkern9971.100609R2-9-1-1SR1.sebn alias dkern9971.100609R2-9-1-1SR1.sebn
tftp-server flash:kern9971.9-1-1SR1.sebn alias kern9971.9-1-1SR1.sebn
tftp-server flash:rootfs9971.9-1-1SR1.sebn alias rootfs9971.9-1-1SR1.sebn
tftp-server flash:sboot9971.031610R1-9-1-1SR1.sebn alias sboot9971.031610R1-9-1-1SR1.sebn
tftp-server flash:skern9971.022809R2-9-1-1SR1.sebn alias skern9971.022809R2-9-1-1SR1.sebn
tftp-server flash:sip9971.9-1-1SR1.loads alias sip9971.9-1-1SR1.loads
tftp-server flash:United_States/g4-tones.xml
tftp-server flash:English_United_States/gd-sip.jar
control-plane
voice-port 0/0/0
voice-port 0/0/1
voice-port 0/0/2
voice-port 0/0/3
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/1/2
voice-port 0/1/3
mgcp profile default
gatekeeper
shutdown
line con 0
line aux 0
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password jebiga
login
transport input all
end
I did not have any kind of problem with X-LITE to register to CME. also try with few SCCP phones 7940 and I did not any kind of problem .
this is content of SEP....xml file for 9971
<device>
<deviceProtocol>SIP</deviceProtocol>
<devicePool>
<dateTimeSetting>
<dateTemplate>M/D/YA</dateTemplate>
<timeZone>Pacific Standard/Daylight Time</timeZone>
<ntps>
<ntp priority="0">
<name>0.0.0.0</name>
<ntpMode>unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<sipPort>5060</sipPort>
</ports>
<processNodeName>192.168.5.251</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<sipProxies>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<localCfwdEnable>true</localCfwdEnable>
<callForwardURI>service-uri-cfwdall</callForwardURI>
<callPickupURI>service-uri-pickup</callPickupURI>
<callPickupGroupURI>service-uri-gpickup</callPickupGroupURI>
<callHoldRingback>2</callHoldRingback>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>2</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>2</dndControl>
<remoteCcEnable>true</remoteCcEnable>
</sipCallFeatures>
<sipStack>
<remotePartyID>true</remotePartyID>
</sipStack>
<sipLines>
<line button="1" lineIndex="1">
<featureID>9</featureID>
<featureLabel></featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name></name>
<displayName></displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
<line button="2" lineIndex="2">
<featureID>9</featureID>
<featureLabel>101</featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name>101</name>
<displayName>Dejan Rakic</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
</sipLines>
<enableVad>true</enableVad>
<preferredCodec>g711alaw</preferredCodec>
<dialTemplate></dialTemplate>
<kpml>1</kpml>
<phoneLabel></phoneLabel>
<stutterMsgWaiting>2</stutterMsgWaiting>
<disableLocalSpeedDialConfig>true</disableLocalSpeedDialConfig>
<dscpForAudio>184</dscpForAudio>
<dscpVideo>136</dscpVideo>
</sipProfile>
<commonProfile>
<phonePassword>1234</phonePassword>
<callLogBlfEnabled>2</callLogBlfEnabled>
</commonProfile>
<featurePolicyFile>featurePolicyDefault.xml</featurePolicyFile>
<loadInformation>sip9971.9-1-1SR1.loads</loadInformation>
<vendorConfig>
</vendorConfig>
<commonConfig>
<videoCapability>0</videoCapability>
<ciscoCamera>0</ciscoCamera>
</commonConfig>
<sshUserId>dejan</sshUserId>
<sshPassword>1234</sshPassword>
<userId></userId>
<phoneServices>
<provisioning>2</provisioning>
<phoneService type="1" category="0">
<name>Missed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/MissedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Received Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/ReceivedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Placed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/PlacedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="2" category="0">
<name>Voicemail</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/Voicemail</url>
<vendor></vendor>
<version></version>
</phoneService>
</phoneServices>
<versionStamp>0131511014412102</versionStamp>
<userLocale>
<name>English_United_States</name>
<langCode>en</langCode>
</userLocale>
<networkLocale>United_States</networkLocale>
<networkLocaleInfo>
<name>United_States</name>
</networkLocaleInfo>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<servicesURL>http://192.168.5.251:80/CMEserverForPhone/serviceurl</servicesURL>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>2</transportLayerProtocol>
</device>Hello,
I'm facing exactly the same problem, that is:
a Cisco SIP Phone 9971 won't register on CME 8.6 running on a 2811
I have read all the postings to this Forum, but I have not been able to solve it.
In my case the commands voice register dn and voice register pool are OK.
So frankly, I have no idea what I could be missing.
I'm pasting the Router's config.
I hope somebody is able to point me in the right direction.
Here is the config. Thank you!
C2811#sh run
Building configuration...
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname C2811
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 172.25.140.1 172.25.140.10
ip dhcp excluded-address 172.35.140.1 172.35.140.10
ip dhcp pool Data
network 172.25.140.0 255.255.255.0
default-router 172.25.140.1
option 150 ip 172.25.140.1
dns-server 172.25.140.1
ip dhcp pool Voice
network 172.35.140.0 255.255.255.0
default-router 172.35.140.1
option 150 ip 172.35.140.1
dns-server 172.35.140.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections sip to sip
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 172.25.140.1 port 5060
max-dn 40
max-pool 42
load 9971 sip9971.9-4-1-9.loads
authenticate register
authenticate realm cisco
tftp-path flash:
create profile sync 0004820400584603
voice register dn 1
number 1010
allow watch
name Phone10
label Phone10
mwi
voice register pool 1
id mac 189C.5DB6.BD09
type 9971
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
username adm password adm
call-forward b2bua busy 68600
codec g711ulaw
no vad
camera
video
voice-card 0
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1879153754
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1879153754
revocation-check none
rsakeypair TP-self-signed-1879153754
crypto pki certificate chain TP-self-signed-1879153754
certificate self-signed 01
(details ommited)
license udi pid CISCO2811 sn FTX1146A44H
username admin privilege 15 password 0 admin
redundancy
interface FastEthernet0/0
no ip address
duplex auto
speed auto
interface FastEthernet0/0.25
description Data VLAN
encapsulation dot1Q 25
ip address 172.25.140.1 255.255.255.0
interface FastEthernet0/0.35
description Voice VLAN
encapsulation dot1Q 35
ip address 172.35.140.1 255.255.255.0
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
tftp-server flash:P00308010200.bin
tftp-server flash:P00308010200.sbn
tftp-server flash:P00308010200.sb2
tftp-server flash:P00308010200.loads
tftp-server flash:SCCP42.9-3-1SR3-1S.loads
tftp-server flash:apps42.9-3-1ES19.sbn
tftp-server flash:cnu42.9-3-1ES19.sbn
tftp-server flash:cvm42sccp.9-3-1ES19.sbn
tftp-server flash:dsp42.9-3-1ES19.sbn
tftp-server flash:jar42sccp.9-3-1ES19.sbn
tftp-server flash:term42.default.loads
tftp-server flash:term62.default.loads
tftp-server flash:SCCP45.9-3-1SR3-1S.loads
tftp-server flash:apps45.9-3-1ES19.sbn
tftp-server flash:cnu45.9-3-1ES19.sbn
tftp-server flash:cvm45sccp.9-3-1ES19.sbn
tftp-server flash:dsp45.9-3-1ES19.sbn
tftp-server flash:jar45sccp.9-3-1ES19.sbn
tftp-server flash:term45.default.loads
tftp-server flash:term65.default.loads
tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.x
ml
tftp-server flash:sip9971.9-4-1-9.loads
tftp-server flash:kern9971.9-4-1-9.sebn
tftp-server flash:rootfs9971.9-4-1-9.sebn
tftp-server flash:dkern9971.100609R2-9-4-1-9.sebn
tftp-server flash:sboot9971.031610R1-9-4-1-9.sebn
tftp-server flash:skern9971.022809R2-9-4-1-9.sebn
tftp-server flash:/g4-tones.xml alias United_States/g4-tones.xml
tftp-server flash:/gd-sip.jar alias English_United_States/gd-sip.jar
control-plane
mgcp profile default
telephony-service
max-ephones 24
max-dn 48
ip source-address 172.25.140.1 port 2000
cnf-file location flash:
load 7960-7940 P00308010200
load 7942 SCCP42.9-3-1SR3-1S.loads
load 7945 SCCP45.9-3-1SR3-1S.loads
load 7962 SCCP42.9-3-1SR3-1S.loads
load 7965 SCCP45.9-3-1SR3-1S.loads
max-conferences 8 gain -6
dn-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 11 2014 07:18:32
ephone-dn 1
number 1001
description Phone 1
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 1002
description Phone 2
name Phone 2
hold-alert 30 originator
ephone-dn 3
number 1003
description Phone 3
name Phone 3
hold-alert 30 originator
ephone 1
device-security-mode none
mac-address 001C.58FB.6E0F
button 1:1
ephone 2
device-security-mode none
mac-address 0014.A981.7F8A
button 1:2
ephone 3
device-security-mode none
mac-address 0006.5356.A4B8
button 1:3
alias exec con conf t
alias exec sib show ip int brief
alias exec srb show run | b
alias exec sri show run int
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
line vty 5 15
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
scheduler allocate 20000 1000
ntp master 1
end
C2811# -
Can't Run program in Debug Mode
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada -
One day when tried to restart my iphone 4, I got a screen asking me to connect to itunes. Itunes asked me to restore my phone. When I tried to restore, I got an Error 23 saying it cannot be restored. I tried the phone support. They asked to contact the service centre. I then tried the service centre guys. They clearly did not know what Error 23 was. They asked to contact the apple support again. After 2-3 guys tried to blow me off saying it is a hardware issue, I asked for a senior analyst. Apple support assigned a senior guy who said he will contact the engineering team. After 2 days, I was told that the engineering team has confirmed that this is a hardware issue.
What I am surprised about is that no one seems to have done any analysis or debugging to figure this out. How do they decide that this is a hardware issue?
The first time I tried it from my laptop and got this message. The support guy told me that my laptop may have an antivirus software which may be causing this issue. So I took it to the service centre. They tried the same restore from their machine and got the exact same error.
The senior analyst that was later assigned to my case, again asked me to restore from my machine. I got the same error.
Basically what they had verified in all these activities was that I was getting error 23. I dont know how they decided that this was due to hardware issues?
Online documentation on Error 23 is vague. It is bunched long with other error codes. There is no clear explanation of what Error 23 is.
But most importantly It says 'In rare cases, this may be a hardware issue'.
So if it is a hardware issue in rare case, how was my case deemed to be a 'rare case'?
When I asked them to escalate this, they said that there is no way to escalate.
I have had a horrible experience with Apple support. Till this point I used to think of Apple as a class apart. But now I am totally disillusioned.
My phone was about a year and a half old. I dont mind it if it actually turns out to be a hardware issue. I will take it as my bad luck.
But I dont see how the support guys decided that this is a hardware issue. I need to know.
And secondly I am shocked that Apple has no escalation path.
Can anyone please help?Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add. -
Saving to Windows Phone Documents Folder
Greetings,
I tried to look through the forum but could not find anything on saving to the Windows Phone Documents folder. From what I researched online on the Windows Phone 8 it was not possible to do this as Microsoft had blocked the ability to do this due to security
reasons. But on the 8.1 release they allowed this area to be accessed by third party apps. Is this correct?
If so how do I go abouts saving to the documents folder. Basically my app is really simple I just input a couple of words into different text boxes and that should save to a text file. How do I go abouts doing this.
I tried doing this
StorageFolder local = KnownFolders.DocumentsLibrary;
However, when I run it the program stops at this spot:
#if DEBUG && !DISABLE_XAML_GENERATED_BREAK_ON_UNHANDLED_EXCEPTION
UnhandledException += (sender, e) =>
if
(global::System.Diagnostics.Debugger.IsAttached) global::System.Diagnostics.Debugger.Break();
#endif
What am I doing wrong. Thank you in advanced!!I apologize for that I looked at it quickly on my phone. Ok so I managed to get it to save to a file. The problem is now is I want to be able to append to that same file. Is that possible?
Here is what I have so far:
using SDKTemplate;
using System;
using System.Collections.Generic;
using Windows.ApplicationModel.Activation;
using Windows.Storage;
using Windows.Storage.Pickers;
using Windows.Storage.Provider;
using Windows.UI.Xaml;
using Windows.UI.Xaml.Controls;
using Windows.UI.Xaml.Navigation;
namespace FilePicker
/// <summary>
/// Implement IFileSavePickerContinuable interface, in order that Continuation Manager can automatically
/// trigger the method to process returned file.
/// </summary>
public sealed partial class Scenario4 : Page, IFileSavePickerContinuable
MainPage rootPage = MainPage.Current;
public Scenario4()
this.InitializeComponent();
SaveFileButton.Click += new RoutedEventHandler(SaveFileButton_Click);
private void SaveFileButton_Click(object sender, RoutedEventArgs e)
// Clear previous returned file name, if it exists, between iterations of this scenario
OutputTextBlock.Text = "";
FileSavePicker savePicker = new FileSavePicker();
savePicker.SuggestedStartLocation = PickerLocationId.DocumentsLibrary;
// Dropdown of file types the user can save the file as
savePicker.FileTypeChoices.Add("Plain Text", new List<string>() { ".csv" });
// Default file name if the user does not type one in or select a file to replace
savePicker.SuggestedFileName = "New Document";
savePicker.PickSaveFileAndContinue();
/// <summary>
/// Handle the returned file from file picker
/// This method is triggered by ContinuationManager based on ActivationKind
/// </summary>
/// <param name="args">File save picker continuation activation argment. It cantains the file user selected with file save picker </param>
public async void ContinueFileSavePicker(FileSavePickerContinuationEventArgs args)
string complete = "";
string office = "";
string revenue = "";
string nps = "";
string answer;
answer = NotesTxt.Text;
StorageFile file = args.File;
if (file != null)
// Prevent updates to the remote version of the file until we finish making changes and call CompleteUpdatesAsync.
CachedFileManager.DeferUpdates(file);
// write to file
await FileIO.WriteTextAsync(file, answer);
// Let Windows know that we're finished changing the file so the other app can update the remote version of the file.
// Completing updates may require Windows to ask for user input.
FileUpdateStatus status = await CachedFileManager.CompleteUpdatesAsync(file);
if (status == FileUpdateStatus.Complete)
OutputTextBlock.Text = "File " + file.Name + " was saved.";
else
OutputTextBlock.Text = "File " + file.Name + " couldn't be saved.";
else
OutputTextBlock.Text = "Operation cancelled.";
private void SaveFileButton_Click_1(object sender, RoutedEventArgs e) -
Problems with IP Phones registration to CUCME on SG200-50P
Problems with IP Phones registration to CUCME on SG200-50P
System setup:
- Router Cisco 2811 with IOS 12.4(24)T5 Advanced IP Services, CUCME 7.1, DHCP Server
with HWIC-4ESW
- Switches:
- old - SLM224P
- new - SG200-50P (SLM2048PT), OS v1.3.2.02
- IP Phones 7911 and 7931, OS v8.4.2
One VLAN (for desktops and IP Phones) and one IP subnet, no voice VLAN.
Network diagram:
C2811---HWIC-4ESW---SWITCH---IPPhones
Problem description:
1. In the old setup with SLM224P everything works fine.
Connected phones almost immediately (1-2 sec. after power up) get ip address, configuration and registers to CUCME.
2. When switch is changed to new SG200-50G:
- ip phones get their ip address and tftp configuration very slowly - about 10-20 seconds
- ip phones cant register to CUCME at all. On the router with SCCP debugging turned on there is no sing of registration attempt
- after reconnecting the old SLM224P situation backs to normal
Things that have been checked or tried without success:
- ports speed and duplex auto, correct detection - although not tested with manual settings
- CDP/LLDP on/off
- smartport mode auto and most static settings, also with disabled smartport
- power cycle / reset
- spanning tree and port security settings
- solutions from that post - https://supportforums.cisco.com/thread/2232161
None of the above methods worked.
The only action that allowed ip phones to register was changing smartport role to static IPPhone + Desktop.
After that when phone was disconnected and then reconnected the problem exists again - no registration (IP Phone status DECEASED in CUCME). Same with power cycle/reset.
Please advice.
Thanks in advance.1 - You have created the voice vlan?
Nope, flat network, one ip subnet (10 hosts and 10 phones)
2 - Have you set a phone on an untagged access port for the voice vlan to see if it works?
Yep, phones are connected to untagged access ports of the one and only vlan
3 - Have you tried to set the auto voice vlan on the switch so it dynamically assigns the role for ip phone + desktop?
Not sure about auto voice vlan setting, although there was no triggers to AVV - no static voice vlan, no CDP/VSDP advertisements of voice vlan.
We've tested static and auto smartport roles (independently of auto voice vlan feature) with successful auto-detection.
The switch was pretty much in default out-of-the-box config (beside management parameters).
4 - When rebooting the switch, you did ensure to save the start up to running config?
Yes, running to startup
5 - Have you manually set spanning tree PORT FAST for the phone ports?
No, we haven't tested that. But portfast should be set automatically for the desktop and ip phone smartport roles. -
WiFi Tether Your Android Tablet to Your Cell Phone - LG Marquee Boost Mobile Example
Greetings Earthlings and Android Fans....
Just posted this to my blog and wanted to share a text version here. Check it out if you're looking to tether your tablet to your cell phone. I tethered my Thrive to my Boost Mobile LG Marquee.
From: Kaio's Klassroom: WiFi Tether Your Android Tablet to Your Cell Phone - LG Marquee Infrastruct...
Want to tether your tablet to your cell phone, but Ad-Hoc got you down? How about trying this nifty little tweak that got me up in running in a jiffy!!
I recently got a new LG Marquee Prepaid Phone with Boost Mobile @Amazon and I really love it. Only problem is, I was spoiled with my last phone because it was rooted to support Infrastructure tethering and I had no idea how difficult and unusual that was. I've since done some research with my new Boost Mobile LG Marquee, and after a little trial and error (and some lucky Google searches) I have successfully tethered my LG Marquee to my Toshiba Thrive tablet!!!
Here's what I did:
Mandatory Disclaimer - The following information is for informational purposes only. Proceed at your own risk!!! Rooting will void your warranty and could "brick" your phone if you do something wrong!! So if you damage your phone, or any of your tech, that's on you.
NOTE: If you don't have an LG Marquee, just search "your phone model" + "root" and you should find plenty of information specific to your phone. There's always people wanting to do the same thing you are, so it's just a matter of finding the information that's already out there. Once your phone is rooted, come back here and start on Step 2.
Step 1 -- Root your LG Marquee (You do NOT need to root your Tablet)
The following information was taken from LG Cell Phones Blog and are for the LG Esteem, which is a generic root mod.
> Enable USB Debugging on your LG Marquee: Go to Settings > Applications > Development > Enable Debugging and check the box.
> Download and install the LG USB drivers at: LG Cell Phones Blog You want the file "LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3. 2.1_2.exe"
> After installing the USB drivers connect your phone to a PC. On the phone, pull down the notification bar at the top of the phone's screen and click on USB Connected. Set the phone to Internet Connection mode (CHARGE ONLY not Mass Storage).
> Download "LG_Esteem_Root.zip" at: LG Cell Phones Blog. Unzip the file and double-click on the run.bat file.
Note: Kaspersky Internet Security will flag this file as a Trojan: "Exploit.Linux.Lotoor.ag" I don't believe this file is a Trojan, per se. I believe it's required during the root process. When I let Kaspersky eliminate the file, my phone wouldn't root. So I decided to run the root program on a secondary computer, just in case. I disabled Kaspersky temporarily on that computer, and ran the root zip and my phone rooted without a hitch. I later scanned my phone with Webroot Security and AVG, and neither found any viruses on my phone, so I believe the process is safe. Technically, rooting your phone probably does involve a Trojan hack, hence why Kaspersky flags that file. However, I must reiterate to proceed at your own risk.
Just in Case -- How to Unroot Sprint LG Marquee:
Use root explorer and delete superuser.apk from the /system/app folder. Go to the Android market and download and install super user. Use root explorer again and delete su from /system/bin. Go to the market and uninstall super user. Do a factory reset & you will be back to square one.
Step 2 -- Verify that you have properly rooted your phone with this nifty free app: Root Checker Basic
If you did everything right, you should get a message that says "Congratulations, this device has root access." If you fail to get that message, go back to Step 1.
Step 3 -- Download the Android WiFi Tether for root users app
Currently, the only version of Android WiFi Tether that worked for me was 3.1-beta7. The newest version doesn't work properly with tablets, so be sure to get 3.1-beta7. Here's a link and QR code for easy access: WiFi Tether 3.1-beta7 apk
Step 4 -- Configure WiFi Tether app:
I've tried many settings, but these are the only ones that have worked. Start the app and grant Super User Permissions. Then Click Menu to get into the app's setting. Inside the Settings, do the following:
> Change Device Profile to: Samsung Galaxy S
> Change Setup Method to: Netd (Master)
> Enable WiFi Encryption: Check box to Enable
> Change Pass Phrase to: any 13 digit password of your choice.
> Change SSID to: any name of your choice.
> Change Channel to: 4 (2427mhz)
> Disable Update Check: Check box to Disable.
> Click your phone's Back Arrow to Exit back to the app's Main Screen
> Touch the WiFi button onscreen to start tethering.
> Grant Super User Permissions
Note: If you get Error Code 67, Click Dismiss. If you update, I don't know what will happen; my guess is it will disable the ability to tether. But if I click Dismiss, my tethering is Enabled, and works perfectly.
Step 5 -- Grab Your Tablet & Start Tethering
> Go to Settings > Wireless & Networks > Check the box to Enable WiFi > Click WiFi Settings > Under WiFi Networks, find the SSID for your tethering app that you entered in Step 4 above. > Click on the SSID of your tethering app > Enter the 13 digit Pass Phrase you created in Step 4 above and Click Connect.
That's it! Congratulations -- your tablet should now be tethered to your cell phone!
Now that you're tethered to your cell phone, be smart, and DON'T download a ton of gigabytes. Just be smart about it, and you should be fine. Remember, tethering to your cell phone probably goes against the terms of service with your cell phone carrier, so DON'T abuse the privilege.
Now that you're the envy of all your friends, why not test your data speeds: SpeedTest App - FreeMy data speed test results with my Toshiba Thrive tablet tethered to my LG Marquee:
Download: 855kbps Upload: 302kbps
That's pretty great for a 3g no-contract cell phone with unlimited data.
Happy tethering everyone!
Go forth and Androidify!
Hugs, Kaio
;oD
From: Kaio's Klassroom: WiFi Tether Your Android Tablet to Your Cell Phone - LG Marquee Infrastruct...If you have a compatible device without Android Market access, you can download Firefox directly from our FTP server. See the instructions here for details: https://wiki.mozilla.org/Mobile/Platforms/Android
Maybe you are looking for
-
Superclass for ABAP server proxy?
Hi Experts, I generated an ABAP server proxy by using a synchronous inbound interface of XI. Can someone tell me which superclass does the server proxy use? I am trying to send an attachment back to XI in the proxy response but am not able to write t
-
Unable tole to charge my macbook pro
Hi All I 'm having problem charging my mac book pro .Any suggestion ???????
-
Export/import portal favorites
Hi, we have NW2004 Portal SP16. Is it possible to export/import portal favorites between users? The reason I asked is that we are planning on using 2 LDAP data sources in production and some users will be migrated in Active Directory from companyA.
-
Best practice for keeping battery life optimal
I am in a job role where my usage of my iPhone 4S is best described as: Weekdays: long call (60+ minutes) after long call (60+ minutes), etc. but MOSTLY voice calls. and Evenings/Nights: Use my phone occasionally, mostly apps/data/entertainment type
-
Is there any way to save audio attachments from multimedia messages or text messages as ringtones so I can set them to specific contacts on the iphone 3gs??