Debug stop on HOOK_DYNP_RAL_PAI

After upgrade to EHP6, every time we set debug mode on with /h in command line, the first stop is in this FM: HOOK_DYNP_RAL_PAI.
This occurs on every transaction.
Any hint what could be this?
Regards,
Frisoni

Thank you Thomas.
It works for HOOK_DYNP_RAL_PAI.
Now it's stopping in CL_DYNP_RAL_API->CHECK_RECORDING_FLAG.
I've checked that this class is not flagged as System Program, but can't find any note for this one.
I'll wait for another note
Thanks.

Similar Messages

Jdev debug stop at breakpoint at ClassLoader.java or BootStrap notfound

Dear All
Anyone kindly guide me why when I start debug jdev toolbox tutorial file, jdev always stop at Exception of ClassLoader.java. and never reach my working files. .
Debugger connected to local process.
Exception breakpoint occurred at line 891 of ClassLoader.java.
java.lang.ClassNotFoundException: oracle/oc4j/loader/boot/BootStrap
Exception breakpoint occurred at line 200 of URLClassLoader.java.
when I try step over it say unable to find source file for package oracle.oc4j.loader.boot, filename BootStrap.java
PS: I can run smoothly if in normal mode. my jdev is 10.1.3.3
thank so much
Bank
Edited by: Jarjarbank on Nov 6, 2012 1:28 AM

Hi All,
I managed to setup the conditional break point via the break point window as opposed to going through the gutter initially.
George

CS3 / XCode: Debugging - Stop on pthread_kill?

Hi
I try to debug an Indesign plugin in XCode. But the debugger stops on pthread_kill.
Why stops it?
Any options wrong?
Thanks
Hans

Could be an assert.
Watch your debugger and console output.
Dirk

System Debugging Stopped Working

Hi Gurus,
From last few days suddenly system debugging has stopped working. When I put it on It gives the message 'System Debugging switched on' but it just doesn't wait & post the document. I have checked with the Basis guy & he confirms there is no change from his side ( Of course I am not convinced about it & strongly believe that something has changed in the syatem ). Can somebody guide me on this.
Regards
Raju Chitale

Hi Raju, have you checked your personal settings within the editor (utilities->settings->debugging)? It could be that you have external debugging active. Prior to ECC5.0 I believe you had to toggle between external and internal debugging. So if you inadvertently switched it to external it won't break within your sap gui sessions until you switch it back to internal.
Kevin

MI debug stopped to work

Hi all,
During export of MI .war through Eclipse(NWDS) I choose to add JSPs as compiled classes and also to keep the generated java classes. Yeah, as SAP said this is useful for JSP debugging and I've tried it, it worked a while, but now - not. I cannot remember if I did something special, but now even if I put breakpoints in both the JSP file and the generated java file, the debugger do not go through it... Did anyone already observed this and how can I overcome this..?
And another strange thing is that MI export of war changes the web.xml in some strange way, that I do not want to...
Thanks,
Lalo

Hello Lalo,
I don't use MDK for my own reason, but you just added one of yours...
You can look at my blog entry on how not to use MDK.
As for the second problem, web.xml, MDK will change this file if you have check compile JSP. It has to do that to create the redirection xml for tomcat.
Julien.

Abap Rfc External Debug from a Jco Client Connection

Hi to all,
i have developed a Java Application on Sap J2ee (SAP-JEE 7.01 SP6) , using the Jco2 integrated.
I'm using direct connection , calling Custom Functions Module on Abap Stack.
I have a question about Abap Debugging:
now i debug the abap function setting an external session breakpoint (SE37) and the abap debug stops correctly on breakpoint that i've set.
But sometimes i notice the strange situation that during my debug another debug session (identical to the first) is open on my sap gui (it seems that Jco sends another request while i'm debugging the first )
Reading the jco documentation i've seen this method that i never used: JCO.Client setAbapDebug(boolean debug)
Enables/disables abap debug.
Note:If the connection is already established the method will close and reopen the connection.
have I to set this in my java code in addition to abap external breakpoint? Why Jco.Client sends another request?
Thanks for the answers
Alessandro

Anyone know?
Thanks,
Augusto Póvoa.

Debug ABAP program

Hello:
I have a WebService and I followed the instructions in order to call it from the ABAP side. So now I have a proxy.
I created a simple ABAP program to test this WS call but it seems it's not working quite well. For external debug purposes, on the WS side I write text files. Those logs indicate me that the WS is indeed being called and exited succesfully.
The WS returns an array of Objects which I assume is translated as a table on ABAP.
I also have some "write" statements on the ABAP program and they indicate me that no exceptions are being thrown. However, when I set the breakpoint just after the call, the table shows it has no "rows" in it, as if the WS retuned something empty.
This is the code:
*& Report Z_WS_EXTERNAL_TES
REPORT Z_WS_EXTERNAL_TES.
DATA: MDM_PROXY TYPE REF TO ZEXTERNALCO_MDMWEB_SERVICES_VI .
TRY.
    CREATE OBJECT MDM_PROXY
CATCH CX_AI_SYSTEM_FAULT .
ENDTRY.
data: OUTPUT type ZEXTERNALGET_CANDIDATES_OUT_DO .
data: INPUT type ZEXTERNALGET_CANDIDATES_IN_DOC .
TRY.
write 'Step 1 '.
    CALL METHOD MDM_PROXY->GET_CANDIDATES
      EXPORTING
        INPUT = input
      IMPORTING
        OUTPUT = output.
write 'Step 11 '.
CATCH CX_AI_SYSTEM_FAULT .
    write 'Step 2 '.
CATCH CX_AI_APPLICATION_FAULT .
    write 'Step 3 '.
write 'END'.
ENDTRY.
The outcome of the program prints:
Step 1           Step 11          END
The breakpoint is set on the line that Prints the string "Step 11". The debug stops there, I click on GLOBALS and the OUTPUT structure doesn't have anything inside..
Any ideas?
Thanks

Hello
Thanks for the answer. Right now the WS returns test data even if no parameters are provided (at least that what I get on the WebServices Navigator)
Does it need any parameters for the WS proxy to be initialized?
Thanks
Alejandro

Firefox stops working when I use the password manager on certain pages

Hey.
When I visit certain pages, Firefox will consistently crash. One of these pages for example is:
betabrand.com
The moment the password manager window jumps up, the window hangs and Firefox stops. It also happens randomly on other pages including
gmail.com
Sometimes, though not always, a script error will appear that says that googletag has stopped working. I don't know what that is and have tried debugging, stopping the script and just continuing. No real effect. Firefox still crashes after trying each in turn.
Firefox will also crash if I try to access the options window.
I have tried:
1. uninstalling firefox and reinstalling fresh. No result.
2. disabling all addons (addons I use are: addblock plus 2.6.5 - Clean Links 2.6.1.0 - Myibidder 1.3.7 and Web Of Trust 20131118). Firefox will function without crashing once I do this but I cannot identify whcih addon is causing the problem because it functions well on each occassion when I cycle through and disable them one by one.
My system specs are:
i7 @ 3.4g
4gig ram
Win7 32
FF crashed while terying to install the troubleshooter addon.
Thanks for any help.

Do you have an ad blocker, firewall, or antivirus installed that may be blocking the google tag?
[http://www.google.com/tagmanager/]
We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
<br><br>
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

1510 Mesh AP Debug

                   Hello friends! I am kicking myself because I cann't find the route of my problem so hopefully somebody can! I have two Cisco 1510 Mesh Access points one is the root. I am working with a Motorola VC70 Windows CE 7.0 unit. The problem that I am having is that everytime the unit roams from the root to the mesh it drops connection. I was doing a debug on the mesh AP and it was saying that "drop frame, sta sent the frame on wrong vapid" when the unit was trying to roam. Does anybody knows what this means? I am working with one SSID (WPA2-PSK) and I have the client on the 2.4ghz channel, channel 11 for the root and 1 for the mesh, and the 5ghz is working as the backhaul on bith channel 161.   Any ideas to point me in the correct direction would help!!!
Thanks,
Jason

When I do a debug on the client and when the unit roams from the working AP to the Mesh the debug stops ( I am doing this from a 2106 Controller). But when the Client roams back to the working AP it shows this. Which I assume is a successful roam. Any other client does the same, Laptop with Intel card, Motorola MC9090 Handheld. It looks like it fully disassociates and looks for its IP? The coverage is very good between the root and the Mesh AP. RSSI is at -42 and both interfaces pass the noise interferance profile. For the coverage that is needed we are using omni antennas and a site survey for the area is around -52 to -66.
(Cisco Controller) >Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Reassociation re
ceived from mobile on AP 00:0b:85:89:f0:50
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 STA - rates (4): 130 132 139 150 12
18 24 36 48 72 96 108 0 0 0 0
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 STA - rates (12): 130 132 139 150 12
18 24 36 48 72 96 108 0 0 0 0
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Processing RSN IE type 48, length 20
for mobile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 RUN (20) Deleted mobile
LWAPP rule on AP [00:0b:85:8f:ad:c0]
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Updated location for station old AP
00:00:00:00:00:00-0, new AP 00:0b:85:89:f0:50-1
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 RUN (20) Change state to
START (0) last state RUN (20)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 START (0) Initializing p
olicy
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 START (0) Change state t
o AUTHCHECK (2) last state RUN (20)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 AUTHCHECK (2) Change sta
te to 8021X_REQD (3) last state RUN (20)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 8021X_REQD (3) Plumbed m
obile LWAPP rule on AP 00:0b:85:89:f0:50
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 apfPemAddUser2 (apf_policy.c:212) Ch
anging state for mobile 40:83:de:16:f3:81 on AP 00:0b:85:89:f0:50 from Associate
d to Associated
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Stopping deletion of Mobile Station:
(callerId: 48)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Sending Assoc Response to station on
BSSID 00:0b:85:89:f0:50 (status 0)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 apfProcessAssocReq (apf_80211.c:3888
) Changing state for mobile 40:83:de:16:f3:81 on AP 00:0b:85:89:f0:50 from Assoc
iated to Associated
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Creating a PKC PMKID Cache entry for
station 40:83:de:16:f3:81 (RSN 2)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Adding BSSID 00:0b:85:89:f0:5f to PM
KID cache for station 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: New PMKID: (16)
Mon Sep 9 12:15:33 2013:      [0000] 53 e6 21 d4 9b a1 a9 cc 5c ed 86 a9 71 00
59 b7
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Initiating RSN PSK to mobile 40:83:d
e:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 dot1x - moving mobile 40:83:de:16:f3
:81 into Force Auth state
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Skipping EAP-Success to mobile 40:83
:de:16:f3:81
Mon Sep 9 12:15:33 2013: Including PMKID in M1 (16)
Mon Sep 9 12:15:33 2013:      [0000] 53 e6 21 d4 9b a1 a9 cc 5c ed 86 a9 71 00
59 b7
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Sending EAPOL-Key Message to mobile
40:83:de:16:f3:81
                    state INITPMK (message 1), replay counter 00.00.00.00.00.00.
00.00
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 Removed NPU entry.
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Received EAPOL-Key from mobile 40:83
:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Ignoring invalid EAPOL version (1) i
n EAPOL-key message from mobile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Received EAPOL-key in PKT_START stat
e (message 2) from mobile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Stopping retransmission timer for mo
bile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Sending EAPOL-Key Message to mobile
40:83:de:16:f3:81
                    state PTKINITNEGOTIATING (message 3), replay counter 00.00.0
0.00.00.00.00.01
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Received EAPOL-Key from mobile 40:83
:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Ignoring invalid EAPOL version (1) i
n EAPOL-key message from mobile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Received EAPOL-key in PTKINITNEGOTIA
TING state (message 4) from mobile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 8021X_REQD (3) Change st
ate to L2AUTHCOMPLETE (4) last state RUN (20)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 L2AUTHCOMPLETE (4) Plumb
ed mobile LWAPP rule on AP 00:0b:85:89:f0:50
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 L2AUTHCOMPLETE (4) Chang
e state to RUN (20) last state RUN (20)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 RUN (20) Reached PLUMBFA
STPATH: from line 4373
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 RUN (20) Adding Fast Pat
h rule
type = Airespace AP Client
on AP 00:0b:85:89:f0:50, slot 1, interface = 1, QOS = 0
ACL Id = 255, Jumbo Frames = NO, 802.1P = 0, DSCP = 0, TokenID = 1506
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 RUN (20) Successfully pl
umbed mobile rule (ACL ID 255)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Stopping retransmission timer for mo
bile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 Added NPU entry of type
1

J2EE/JSP/EJB - ojvm debugging hangs

I'm using JDeveloper version 10.1.2.0.0 (build 1811) at following enviroment:
Server: Windows XP
Client: Windows XP
JAVA:1.4.2_04 that comes with Jdev
I have the following problem:
I have a project with *.jsp and *.java files when i try do debug a java file using
the ojvm he get's to the breakpoint then if try to the debug using step over/step into
the process hangs no exception and no coming back. If i use the others vm (hotspot, client or sever)
Jdev doesn't hang. The problem only occurs where debugging with ojvm.
When the debug process hangs no way to know what it's doing cause it's not
possible to pause (cliking the debugger pause button there's no reaction) just stopping de
process by cliking 2 times at the debug stop button.
I changed from Jdev 9.0.5.16.15 to Jdev 10.1.2.0.0 (build 1811) same problem.
Any help?

I see. A logger is software that catches the fallout and presents it to you.
Well, I'm slightly resistant because I can program this stuff OK, but I work from home .. there's no backup for me, no sysad to help. I've recently moved to Linux and I'm groping around it. So I fear a day or two of non-productive farting about trying to get a logger to work, and I could do without it.
Then again, it can take me a good while to debug something blind.
So. Any recommendation for a simple logger? Are they java or do they depend on the OS? Oh, and free/open source of course :-)
Or, if anyone could tell me how to get my printlns to work that would be good too :-)
J

Forte c++ debug with softlinked files

Some of my source code files are softlinks. For example, I have my main as
lrwxrwxrwx 1 jliu 63 Sep 14 14:54 main.cxx -> /databases/source/#44/13942
When I set a debug stop in this file, the workshop generate the following warning:
warning: can't find file "/databases/source/#44/main.cxx"
It seems that workshop is looking for the file "main.cxx" in the database where the file
has the name of "13924". Why is this and more imporatantly, how to get around of this?
Thanks,
[email protected]

> I appreciate that this old GUI is no longer supported BUT the SAP note states that 620 patch 56 is the minimum level for method "G" to work - and previous testing showed that it DID work ok. It seems only some of the 620 patch 57 users are affected - just wondering if you can advise why and if there is a 'quick fix' for this, perhaps an updated fputs.c file or something?
fputs.c is a source file that is used to compile the GUI. The assertion is thrown because an expected condition is not met. So even if you would take out the assertion, there's no guarantee it'll work because "something" on the operating system is not right.
I suggest you compare installed software and windows hotfixes on the affected PCs vs. those who don't show this error. The error may also be that after the installation of the SAPGUI another software product was installed that replaced certain DLLs that are also used by the SAPGUI.
Markus

Flash Remote Debugger Help

Yesterday, my Flash CS3 AS2 remote debugging stopped working
after I installed a number of Adobe updates and on Mac OS X (Intel)
update. Before I installed the updates, I was able to debug any SWF
loaded in my browser window with the CS3 debug interface and output
window. After I rebooted, all of my browsers stopped sending my the
prompt to connect to a local host or enter an IP. Also, "debug" is
no longer an option in the drop down menu when I right click on the
swf in the browser window. Flash remote debugging is marked
properly in the FLA publish settings and a new SWD is being
published every time I test. But the player doesn't attempt to
connect at all! I don't know if the loss of this functionality is
related to the updates but it does seem that way.
Any help, please?!
Thanks,
Steven

Problem solved. After the update, I needed to get the newest
version of the Adobe Debug Player for Intel Macs.
see what players you have here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
get the player specific to your OS here:
http://www.adobe.com/shockwave/download/alternates/#fp

Skip Authorization Check in ECC5.0

I have noticed a major diffrence in authorization check for tcodes in ECC5.0 . In earlier versions in debug mode I found that if there is a command like :
CALL TRANSACTION 'PA30' and SKIP FIRST SCREEN
If i press F5 it directly shows me the error message "Not authorised to PA30" in case there is no auth to execute it, and the debugging stops.
But in Earlier versions it used to goto a function module to check the auth. I just want to customize the function module to skip the auth check for a certain set of users.
Any clue for this?

Hi Alex,
I am not very sure about Personnel Cost Planning,
But an approach I have used in the past when exploring a module about which there is limited documentation or SAP standard model roles is to
1) Switch on Trace using ST01.
2) Carry out a series of transcations using a user id which has a lot of authorizations or SAP_ALL.
3) Anlayse the trace document and identify all the authorization object.
4) BUild a new role with the auth objects and assign to test user id.
5) test and confirm that the authorizations are not too many or too less.
A time consuming but thorough approach.
hope this helps.

New install lightdm does not start

I've installed arch and not much past that point. After troubles with lightdm I installed gnome and used 'systemctl enable gdm' and gdm worked after my reboot. Anyway, more info on my lightdm problem.
Steps to install
pacman -S lightdm
pacman -S lightdm-gtk3-greeter
systemctl enable lightdm
reboot
Upon reboot screen flashes a couple of times and then stops.
I had installed xfce4 prior to this and made sure the xfce4.desktop file existed. I've looked up other posts and I have not had look implementing their solutions. Any ideas?
DEBUG: Started session 395 with service 'lightdm-greeter', username 'lightdm'
DEBUG: Session 395 authentication complete with return value 0: Success
DEBUG: Greeter authorized
DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
DEBUG: Session 395 running command /usr/bin/lightdm-gtk-greeter
DEBUG: Greeter closed communication channel
DEBUG: Session 395 exited with return value 1
DEBUG: Greeter quit
DEBUG: Failed to start greeter

My Lightdm stopped working a few days ago after an update.
tschertel wrote:I've fixed it going to /var/lib then "chown lightdm.lightdm lightdm/"
This doesn't work for me.
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.6.1, UID=0 PID=1230
[+0.00s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: Registered seat module xlocal
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Adding default seat
[+0.00s] DEBUG: Starting seat
[+0.00s] DEBUG: Starting new display for greeter
[+0.00s] DEBUG: Starting local X display
[+0.00s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
[+0.00s] DEBUG: Using VT 7
[+0.00s] DEBUG: Activating VT 7
[+0.01s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+0.01s] DEBUG: Writing X server authority to /run/lightdm/root/:0
[+0.01s] DEBUG: Launching X Server
[+0.01s] DEBUG: Launching process 1234: /usr/sbin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.01s] DEBUG: Waiting for ready signal from X server :0
[+0.01s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.01s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.48s] DEBUG: Got signal 10 from process 1234
[+0.48s] DEBUG: Got signal from X server :0
[+0.48s] DEBUG: Connecting to XServer :0
[+0.48s] DEBUG: Starting greeter
[+0.49s] DEBUG: Started session 1241 with service 'lightdm-greeter', username 'lightdm'
[+0.49s] DEBUG: Session 1241 authentication complete with return value 0: Success
[+0.49s] DEBUG: Greeter authorized
[+0.49s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+0.49s] DEBUG: Session 1241 running command /usr/sbin/lightdm-gtk-greeter
[+0.53s] DEBUG: Greeter connected version=1.6.1
[+0.53s] DEBUG: Greeter connected, display is ready
[+0.53s] DEBUG: New display ready, switching to it
[+0.53s] DEBUG: Activating VT 7
[+0.66s] DEBUG: Greeter start authentication for lipek
[+0.66s] DEBUG: Started session 1261 with service 'lightdm', username 'lipek'
[+0.67s] DEBUG: Session 1261 got 1 message(s) from PAM
[+0.67s] DEBUG: Prompt greeter with 1 message(s)
[+5.21s] DEBUG: Continue authentication
[+5.24s] DEBUG: Session 1261 authentication complete with return value 0: Success
[+5.24s] DEBUG: Authenticate result for user lipek: Success
[+5.24s] DEBUG: User lipek authorized
[+5.24s] DEBUG: Greeter sets language pl_PL.utf8
[+5.25s] DEBUG: Greeter requests session gnome
[+5.25s] DEBUG: Using session gnome
[+5.25s] DEBUG: Stopping greeter
[+5.25s] DEBUG: Session 1241: Sending SIGTERM
[+5.25s] DEBUG: Greeter closed communication channel
[+5.25s] DEBUG: Session 1241 exited with return value 0
[+5.25s] DEBUG: Greeter quit
[+5.26s] DEBUG: Dropping privileges to uid 1000
[+5.26s] DEBUG: Calling setresgid
[+5.26s] DEBUG: Calling setresuid
[+5.26s] DEBUG: Restoring privileges
[+5.26s] DEBUG: Calling setresuid
[+5.26s] DEBUG: Calling setresgid
[+5.26s] DEBUG: Dropping privileges to uid 1000
[+5.26s] DEBUG: Calling setresgid
[+5.26s] DEBUG: Calling setresuid
[+5.26s] DEBUG: Writing /home/lipek/.dmrc
[+5.33s] DEBUG: Restoring privileges
[+5.33s] DEBUG: Calling setresuid
[+5.33s] DEBUG: Calling setresgid
[+5.36s] DEBUG: Starting session gnome as user lipek
[+5.36s] DEBUG: Session 1261 running command /etc/lightdm/xsession gnome-session
[+5.38s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+5.38s] DEBUG: Session 1261 exited with return value 0
[+5.38s] DEBUG: User session quit
[+5.38s] DEBUG: Stopping display
[+5.38s] DEBUG: Sending signal 15 to process 1234
[+5.77s] DEBUG: Process 1234 exited with return value 0
[+5.77s] DEBUG: X server stopped
[+5.77s] DEBUG: Removing X server authority /run/lightdm/root/:0
[+5.77s] DEBUG: Releasing VT 7
[+5.77s] DEBUG: Display server stopped
[+5.77s] DEBUG: Switching to greeter
[+5.77s] DEBUG: Starting new display for greeter
[+5.77s] DEBUG: Starting local X display
[+5.77s] DEBUG: Using VT 7
[+5.77s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+5.77s] DEBUG: Writing X server authority to /run/lightdm/root/:0
[+5.77s] DEBUG: Launching X Server
[+5.77s] DEBUG: Launching process 1271: /usr/sbin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+5.77s] DEBUG: Waiting for ready signal from X server :0
[+6.22s] DEBUG: Got signal 10 from process 1271
[+6.22s] DEBUG: Got signal from X server :0
[+6.22s] DEBUG: Connecting to XServer :0
[+6.22s] DEBUG: Starting greeter
[+6.22s] DEBUG: Started session 1276 with service 'lightdm-greeter', username 'lightdm'
[+6.22s] DEBUG: Session 1276 authentication complete with return value 0: Success
[+6.22s] DEBUG: Greeter authorized
[+6.22s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+6.22s] DEBUG: Session 1276 running command /usr/sbin/lightdm-gtk-greeter
[+6.26s] DEBUG: Greeter connected version=1.6.1
[+6.26s] DEBUG: Greeter connected, display is ready
[+6.26s] DEBUG: New display ready, switching to it
[+6.26s] DEBUG: Activating VT 7
[+6.40s] DEBUG: Greeter start authentication for lipek
[+6.40s] DEBUG: Started session 1296 with service 'lightdm', username 'lipek'
[+6.40s] DEBUG: Session 1296 got 1 message(s) from PAM
[+6.40s] DEBUG: Prompt greeter with 1 message(s)
** (process:1276): WARNING **: Failed to open CK session: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
(lightdm-gtk-greeter:1278): Gtk-WARNING **: Theme parsing error: gtk.css:72:18: Not using units is deprecated. Assuming 'px'.
(lightdm-gtk-greeter:1278): Gtk-WARNING **: Theme parsing error: gtk.css:72:20: Not using units is deprecated. Assuming 'px'.
** (lightdm-gtk-greeter:1278): WARNING **: Failed to open sessions directory: Error opening directory '/usr/share/lightdm/remote-sessions': No such file or directory
** (lightdm-gtk-greeter:1278): WARNING **: Failed to load user image: Failed to open file '/home/lipek/.face': Permission denied
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XKeyboardLayouts
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XHasMessages
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type: assertion `value != NULL' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type_string: assertion `value != NULL' failed
** (lightdm-gtk-greeter:1278): WARNING **: Unexpected accounts property type for XHasMessages: (null)
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_unref: assertion `value != NULL' failed
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XKeyboardLayouts
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XHasMessages
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type: assertion `value != NULL' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type_string: assertion `value != NULL' failed
** (lightdm-gtk-greeter:1278): WARNING **: Unexpected accounts property type for XHasMessages: (null)
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_unref: assertion `value != NULL' failed
Any ideas?
Last edited by LiPeK (2013-09-13 21:55:51)

How to Embed FPM ABAP into a WebDynpro ABAP Application

HI all,
I've embedded a custom FPM component a custom WebDYnpro application and I've coded this:
      DATA: lo_usage TYPE REF TO if_wd_component_usage,
            ls_conf_key TYPE wdy_config_key.
      lo_usage = wd_this->wd_cpuse_po_manage_fpm_usage( ).
      IF lo_usage->has_active_component( ) = abap_true.
        lo_usage->delete_component( ).
      ENDIF.
      ls_conf_key-config_id = 'ZWD_SRM_PO_MANAGE_OIF'.
      TRY.
           CALL METHOD lo_usage->create_component
            EXPORTING
              component_name   = 'FPM_OIF_COMPONENT'
              configuration_id = ls_conf_key.
        CATCH cx_wd_runtime_api .
      ENDTRY.
My application is called (debug stops) but the screen that's rendered is an empty screen with Start and Close buttons (the initial screen which is normally displayed is not in this case).
What could the problem be?
Also, how can I pass parameters to my FPM application? (According to the PDF guide, app_parameters can't be used!)
Thank you.

Hi ,
Did you find a solution to your problem?. I'm trying to do the same kind of thing and have the same problem.
Thanks.

Debug stop on HOOK_DYNP_RAL_PAI

Similar Messages

Maybe you are looking for