CS3 / XCode: Debugging - Stop on pthread_kill?

Hi
I try to debug an Indesign plugin in XCode. But the debugger stops on pthread_kill.
Why stops it?
Any options wrong?
Thanks
Hans

Could be an assert.
Watch your debugger and console output.
Dirk

Similar Messages

My Illustrator CS3 & CS6 are stop working

My Illustrator CS3 & CS6 are stop working. The AI file which I created by Illustrator CS3. My Illustrator CS3 used to work fine, but recently it is stop working when I tried to save the AI file. The AI file is a package design which contain text and images. It can be opened and edited on my colleague's compute but not mine. I thought I installed Illustrator CS6 will solve the problem, but same error window pop up.
Please help!

ww,
A screenshot (you may use the Insert Image button, which looks like a camera), or the text of the error message might be helpful.

Xcode debugger stops when NOT going through break

I have some c++ code, very simple:
195 MyModelItem *parentItem = thisItem->parent();
196 if(parentItem == NULL)
197 {
198 std::cout << "parentItem is NULL\n";
199 bool parentIsNull = true;
200 if(parentIsNull)
201 return QModelIndex();
202 return QModelIndex();
203 }
204 else if((unsigned int)parentItem == 0x4d0000)
205 {
206 std::cout << "parentItem is 0x4d0000\n";
207 return QModelIndex();
208 }
209 else if (parentItem == m_root)
210 return QModelIndex();
211
212 return createIndex(parentItem->row(), 0, parentItem);
213 }
I put a breakpoint on line 200 -- the one that is inside the if-clause and says:
bool parentIsNull = true;
There is a cout right above that line. So the breakpoint should not be triggered except when parentItem is NULL, and the debugger console should have the "parentItem is NULL" message logged to it.
But, in fact, the breakpoint gets triggered every single solitary time the function gets called. According to the GDB status reported on the debugger console, it claims that it has stopped at "Breakpoint 1" and that it is "Line 200". Line 200 is indeed the line that I put the breakpoint on, but the little red arrow is not on Line 200, it's on Line 204. If I single-step after the breakpoint stops, it goes to line 209, then the red arrow jumps to the "return" statement which is at the end of the previous function in the file, and then finally to line 213 -- which is one line after the actual return statement.
So does anyone know any way to get the debugger to behave? To only stop when the breakpoint in question actually gets triggered? It would be nice if the single-step behavior followed what code is supposed to be executing, but I would settle for not stopping at "phantom" triggers.

When I type "clear" at the gdb prompt, I get a "No source file specified" error...
I'm not sure that I am being clear on my problem here. I have a breakpoint at line 200. Line 200 is inside the if-clause
if(parentItem==NULL) { ... }
I want the program to stop at line 200, but only if parentItem==NULL. In my previous experience with every debugger I've used (including many years using gdb) if you set a break on a line of code that only executes if some condition is true, then the breakpoint only gets triggered, and the program only stops, if the condition is true and the line of code that the breakpoint is on executes. What I am seeing is that Xcode wants to stop at the breakpoint if the line is executed, but also stop at the next line which is executed if that line is not executed. I can set the breakpoint to a log-and-continue state, but then it logs and continues when I want it to stop. I tried setting the condition of parentItem==NULL in the edit breakpoint dialog, but then it says "Error in testing breakpoint condition:"
When I've seen this behavior before it has been related to not getting optimization turned off. (The optimization makes the whole swath of code disappear, and so the debugger just kinds improvises on the line numbers and stops whenever you are in the vicinity.) But I have checked the project settings over and over, and it's set debug, and optimization is set to NONE, and I just can't see anything else to turn on/off to get breakpoints to work.

CS3 Standard - Has stopped working

I have just begun receiving error messages,"Adobe[Program]CS3 has stopped working..A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. This happens when I try to open Illustrator and Photoshop.
These programs have worked perfectly until the other day, I have searched the forums for solutions and also have gone through Customer Support but have not found the correct information.
My OS is Windows Vista Home Premium, 32bit.
I cannot isolate what would have caused this except for some updates from Adobe. Please advise, thank you.

Can you do a system restore to a point before the problem started?
If so, you can try doing any updates again, and do them one at a time, then test, to be sure things still work.
Peter

Jdev debug stop at breakpoint at ClassLoader.java or BootStrap notfound

Dear All
Anyone kindly guide me why when I start debug jdev toolbox tutorial file, jdev always stop at Exception of ClassLoader.java. and never reach my working files. .
Debugger connected to local process.
Exception breakpoint occurred at line 891 of ClassLoader.java.
java.lang.ClassNotFoundException: oracle/oc4j/loader/boot/BootStrap
Exception breakpoint occurred at line 200 of URLClassLoader.java.
when I try step over it say unable to find source file for package oracle.oc4j.loader.boot, filename BootStrap.java
PS: I can run smoothly if in normal mode. my jdev is 10.1.3.3
thank so much
Bank
Edited by: Jarjarbank on Nov 6, 2012 1:28 AM

Hi All,
I managed to setup the conditional break point via the break point window as opposed to going through the gutter initially.
George

Phsp CS3 - License has stopped working - How to access new install version for download?

Please help! I just finished a session with Adobe and they told me to use the Forums for a solution to my issue.
Bought a new iMac with Mavericks OS/X. Photoshop CS3 will not open due to a "license has stopped working" error message. I asked the Adobe support person for a link to download a replacement copy and he gave me a link that gives a 404 error on the Mac dmg download page,. I am ready to install PS CS3 but first need to have a usable dmg download link. The tech support person assured me that experts on this forum can help. My question is WHY did he send me to a non-working link?
Thanks for any advice you can give that really works! :-D

I get the "License has stopped working" mesages too.
We have a MacbookPro at home. There are two user-acounts on this mac, one for my wife and one for myself. This way we keep our personal stuff (e-mail, files, settings, dropbox, desktop clutter etc) separated. "Fast user switching" is enabled to easily switch to your personal account.
Now when I open Photoshop I might get the dreaded "License has stopped working" message. This will happen if Photoshop is left open in her account. So I'll have to log into her account, close Photoshop, go back into my own acount and open Photoshop again.
I should not get this message since Photoshop is not part of a particular user account, it is installed in the "Applications" folder which is accesible to all users.
What makes it even more annoying is that I get the "License has stopped working" message on trying to open Photoshop even when Photoshop is closed in in the other acount, but Illustrator is opened.
This makes no sense since we bought Photoshop and Illustrator CS3 as separate programs, not as a part of the Creative Suite.
I did not report this to Adobe yet but it wil do that now.

CS3 licensing has stopped working?

Recently my enitre CS3 Suite informed my that my "licensing has stopped working. Please uninstall and then reinstall the software." However the software disc is rejected by my 3 year old mac power book as there is some minor wear on the disc. So now what? The disc will read on a newer powermac so I tried to clone it but it is still rejected by my machine. All of the software is already on my mac but none of it will work because of this ridiculous reinstall requirement. How can I reinstall if the disc is unreadable on my mac? Is there a way to copy the disc so it WILL read?

I'm afraid this is the wrong forum. Not sure exactly which is the right one.

Why does CS3 Brush Tool stop painting?

Ref Kelby 7-Point System for PS-CS3, Lesson 14, Step 10, after a few brush strokes of "painting" the camera, the Brush Tool "runs dry" - in other words, the brush tool stops working. I've uninstalled and re-installed PS-CS3 but it doesn't solve the problem. I am using a Dell Inspiron 1720 with 3gb RAM. Performance shows plenty of scratch disk space and lots of memory. Any suggestions?

I'm stumped. Has there been a change to your hardware or software setup? Have you tried shutting down and restarting your computer (in case it's a glitch)? If the answer to these questions is no and yes, respectively, maybe include a screenshot of your app.
I find that selecting the Brush tool and clicking on the Stroke color swatch in the Properties panel allows me to freely sample from the color picker, the canvas, or anywhere on screen. I'm using FW CS6 on Mountain Lion, and have a non-Retina MacBook display.

Weird xcode debugging iss

I am having issues debugging with xcode. When I step through my code, the steps go backwards. For instance, it will take a step, then the next step it will go two lines up, then it will continue on for a bit more, then go back up, then continue on.
In my experience thus far, i've noticed weird behavior after my code does something bad. However, in this case, I'm finding this behavior in my bootstrap class (iphone)
- (void)applicationDidFinishLaunching:(UIApplication *)application
Also, my app appears to work ok. I don't see anything in the log. This has been bugging me for a while b/c it makes debugging very difficult. Any ideas?

Either you're trying to debug an optimized (Release) build, or the binary that the debugger is loading isn't the same as what's running. In the former case, build for Debug with optimization turned down. In the latter case, try "Clean All", and maybe restart the target device or the simulator, if you're debugging there.

XCode debugging problems

For some reason, when I try to debug or run my application within XCode, my Application menu does not appear, and keys pressed go to the runlog window, not my application controls.
Any Idea what's going on, or how I should start troubleshooting this problem?

It sounds like your Info.plist file is messed up. I used to get that problem when I was first using Xcode. The best way to fix it is to create a new Cocoa application with nothing in it. Compile and run it to make sure it works correctly. Then, inspect the Project and Target settings. I don't remember precisely where the problem was. Usually, it was something related to a mismatch involving the name of the application. I had renamed my app something different than MyApp and didn't use the new name everywhere.
Anyway, inspect those settings. Your GUI has become disconnected from your application. Sorry I can't provide more help. It has been several years since I had this problem. I have since learned to pick a good application name when I create the project and stick with it.

Debug stop on HOOK_DYNP_RAL_PAI

After upgrade to EHP6, every time we set debug mode on with /h in command line, the first stop is in this FM: HOOK_DYNP_RAL_PAI.
This occurs on every transaction.
Any hint what could be this?
Regards,
Frisoni

Thank you Thomas.
It works for HOOK_DYNP_RAL_PAI.
Now it's stopping in CL_DYNP_RAL_API->CHECK_RECORDING_FLAG.
I've checked that this class is not flagged as System Program, but can't find any note for this one.
I'll wait for another note
Thanks.

プラグインのビルド方法(CS3/Xcode)

Xcode 2.4.1にてSDKのサンプルコードをビルドしてみたのですが、
　ld: Undefined symbols:
　__Z11ASSERT_FUNCPKcS0_l
　__Z11FORMAT_ARGSPKcz
　__Z15ASSERT_STD_FUNCPKcS0_l
　・・・(100箇所くらい）・・・
のエラーが出てしまいます。どうしたら解消できるでしょうか？
Pluginの開発を試されている方、教えてください。
Xcode/Indesign SDKとも標準インストールです。たとえば、Adobe Indesign CS3 Products SDK/build/mac/prj/BasicDialog.sdk.xcodeprojをXcodeで開いて、すぐビルドする、といった状況で起こります。

Could be an assert.
Watch your debugger and console output.
Dirk

System Debugging Stopped Working

Hi Gurus,
From last few days suddenly system debugging has stopped working. When I put it on It gives the message 'System Debugging switched on' but it just doesn't wait & post the document. I have checked with the Basis guy & he confirms there is no change from his side ( Of course I am not convinced about it & strongly believe that something has changed in the syatem ). Can somebody guide me on this.
Regards
Raju Chitale

Hi Raju, have you checked your personal settings within the editor (utilities->settings->debugging)? It could be that you have external debugging active. Prior to ECC5.0 I believe you had to toggle between external and internal debugging. So if you inadvertently switched it to external it won't break within your sap gui sessions until you switch it back to internal.
Kevin

Flash CS3 FlvPlayback Skin Stop Button is working as pause

Hi,
     I am using the skin for FlvPlayback player I have selected the sking from given list of skin.
     The issue is When I select the skin which is having Stop Button, Stop Button is not stopping the video is it just pause the video and after click of play button it should start from begining of the video which is expected bevhaviour of Stop button.
    any one can help me to resolve this issue.
Thanks in advance.
Sangati

Yup, that is how it works. You can't control which state a button is in. So when you click on it, it will go to the down state and when you let go it will go back to over (or up if you release outside).
Not sure exactly what the "fix" is. It depends upon what you are trying to do. Generally you would need to use MovieClips instead of buttons with event handlers to tell you "button" what to do. Very few people I know actually use buttons.

Xcode debugging help

I'm new to xcode, so I don't really know how to use much of it, so here's my problem: I started a fairly simple project with version 2.0 (came with tiger) and I got about half way through and it was working great. Then I realized that it wasn't universal, so I downloaded xcode 2.4.1. When I tried to build it as universal I got a bunch of errors, and I have no idea what it means or how to fix it! I'm coding in applescript, and when I run the app via the debugger, it all seems to work just fine, but it won't build because of some errors. Can anyone give me any insight as to what this all means? I couldn't seem to copy and paste, so I took screenshots:
pic 1
pic 2
Thanks!
p.s. - Can you include images in posts?!

It appears that you may not be linking against the Universal libraries. But here are some things to check.
I believe your "target" has to be a "native" target in order to build universal binaries. Older projects that are brought forward may not be "native"... I'm not sure exactly when this changed so I'm not sure if your 2.0 Project would've been "native" or not. Select the top level "project" icon in the "Groups & Files" pane (the one with the little Xcode icon). Then select the "Project" menu on the menu bar... if "Upgrade all Targets in Project to Native" is dimmed out then you're already native and you don't need to do anything. If it's not dimmed then select it to upgrade your targets to "native" format.
With the top level project item still selected click on the "Info" button in Xcode's toolbar (or select "File -> Get Info" from the menu bar). In the Info window click the "General" pane. Check the pop-up setting for "Cross-Develop Using Target SDK:"... it should be set to "Mac OS X 10.4 (Universal)". Change it if it's not.
While still in the Info window, click the "Build" tab. The first setting in the list should be "Architectures" and it's value should be "ppc i386". If it's not then select that line and click the "Edit" button to turn on the checkboxes for both PPC and Intel. The second item in the list should be "SDK Path" and should be set to "/Developer/SDKs/MacOSX10.4u.sdk". If it's not then select that line and click "Edit" to enter the path to the sdk (without the quotes).
Check those items and post back if it doesn't fix your problem.
Steve

CS3 / XCode: Debugging - Stop on pthread_kill?

Similar Messages

Maybe you are looking for